2023

Sun, Tianzhu, Liu, Conghui, Franciosa, Pasquale, Ferguson, Nesta, Gibbons, Gregory John, Ceglarek, Dariusz, Mogire, Evans and Zhang, Peilei (2023) Effect of placement configuration on the microstructure, porosity and mechanical performance of dissimilar remote laser welding of additive manufactured AlSi10Mg alloy and conventionally manufactured 1050 aluminium sheets. Journal of Materials Research and Technology, 27 . pp. 5639-5650. doi:10.1016/j.jmrt.2023.11.077 ISSN 2238-7854.

Isakov, Dmitry, Couling, Kevin and Gibbons, Gregory J. (2023) 3D-printing of all-dielectric electromagnetic devices : challenges and opportunities. In: 2023 International Conference on Electromagnetics in Advanced Applications (ICEAA), Venice, Italy, 09-13 Oct 2023. Published in: 2023 International Conference on Electromagnetics in Advanced Applications (ICEAA) ISBN 9798350320596. doi:10.1109/iceaa57318.2023.10297870 ISSN 2835-1355.

Yong, Ching Kiat, Keating, Elspeth, Hughes, Darren J., Connolley, Thomas, West, Geoffrey D., Wong, Chow Cher and Gibbons, Gregory John (2023) Assessment of residual strain in laser shock peened additive manufactured Inconel 718 using synchrotron X-ray diffraction. Materialia, 30 . 101843. doi:10.1016/j.mtla.2023.101843 ISSN 2589-1529.

Yang, Xinliang, Gibbons, Gregory John, Tanner, David A., Li, Zushu, Wilson, Paul, Williams, Mark A. and Kotadia, Hiren R. (2023) Scan strategy induced microstructure and consolidation variation in the Laser-Powder Bed Fusion (L-PBF) Additive Manufacturing of low alloy 20MnCr5 steel. Materials & Design, 232 . 112160. doi:10.1016/j.matdes.2023.112160 ISSN 0264-1275.

Gülçür, Mert, Couling, Kevin, Goodship, Vannessa, Charmet, Jérôme and Gibbons, Gregory John (2023) Rapid tooling : investigation of soft-tooled micro-injection moulding process characteristics using in-line measurements and surface metrology. Rapid Prototyping Journal, 29 (7). pp. 1420-1437. doi:10.1108/RPJ-06-2022-0187 ISSN 1355-2546.

Gülçür, Mert, Wilson, Paul, Donnelly, Michael, Couling, Kevin, Goodship, Vannessa, Charmet, Jérôme, Williams, Mark A. and Gibbons, Gregory John (2023) X-ray computed tomography for predictive quality assessment, 3D visualisation of micro-injection mouldings and soft-tool deformation. Materials & Design, 227 . 111741. doi:10.1016/j.matdes.2023.111741 ISSN 0264-1275.

2022

Sun, Tianzhu, Ferguson, Nesta, Liu, Conghui, Gibbons, Greg and Franciosa, Pasquale (2022) Application of adjustable ring mode laser in remote laser welding of additive manufactured AlSi10Mg alloy. Journal of Laser Applications, 34 (4). 042007. doi:10.2351/7.0000794 ISSN 1042-346X.

Winnett, James, Jumbu, Neeraj, Cox, Sophie C., Gibbons, Gregory John, Grover, Liam M., Warnett, Jason M., Williams, Mark A., Dancer, Claire E. J. and Mallick, Kajal (2022) In-vitro viability of bone scaffolds fabricated using the adaptive foam reticulation technique. Biomaterials Advances, 136 . 212766. doi:10.1016/j.bioadv.2022.212766 ISSN 2772-9508.

2021

Kotadia, H. R., Gibbons, Gregory John, Das, A. and Howes, P. D. (2021) A review of laser powder bed fusion additive manufacturing of aluminium alloys : microstructure and properties. Additive Manufacturing, 46 . 102155. doi:10.1016/j.addma.2021.102155 ISSN 2214-8604 .

Kumar, Manoj, Gibbons, Gregory John, Das, Amitabha, Manna, Indranil, Tanner, David and Kotadia, Hiren R. (2021) Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion : microstructural evolution, defects and mechanical properties. Rapid Prototyping Journal, 27 (7). pp. 1388-1397. doi:10.1108/RPJ-10-2020-0241 ISSN 1355-2546.

2020

Yong, Ching-Kiat, Gibbons, Gregory John, Wong, Chow Cher and West, Geoffrey D. (2020) A critical review of the material characteristics of additive manufactured IN718 for high temperature application. Metals, 10 (12). 1576. doi:10.3390/met10121576 ISSN 2075-4701.

Maran, Sibi, Masters, Iain and Gibbons, Gregory John (2020) Additive manufacture of 3D auxetic structures by laser powder bed fusion — design influence on manufacturing accuracy and mechanical properties. Applied Sciences, 10 (21). 7738. doi:10.3390/app10217738 ISSN 2076-3417.

Cherkasov, Nikolay, Baldwin, Samuel, Gibbons, Gregory John and Isakov, Dmitry (2020) Monitoring chemistry in situ with the Smart Stirrer a magnetic stirrer bar with an integrated process monitoring system. ACS Sensors, 5 (8). pp. 2497-2502. doi:10.1021/acssensors.0c00720 ISSN 2379-3694.

Xu, Rui, Gao, Steven, Izquierdo, Benito Sanz, Gu, Chao, Reynaert, Patrick, Standaert, Alexander, Gibbons, Gregory John, Bosch, Wolfgang, Gadringer, Michael Ernst and Li, Dong (2020) A review of broadband low-cost and high-gain low-terahertz antennas for wireless communications applications. IEEE Access, 8 . pp. 57615-57629. doi:10.1109/access.2020.2981393 ISSN 2169-3536.

2019

Malas, Asish, Isakov, Dmitry, Couling, Kevin and Gibbons, Gregory John (2019) Fabrication of high permittivity resin composite for vat photopolymerization 3D printing : morphology, thermal, dynamic mechanical and dielectric properties. Materials, 12 (3818). pp. 1-13. doi:10.3390/ma12233818 ISSN 1996-1944.

Urasinska-Wojcik, Barbara, Chilton, Neil, Todd, Peter M., Elsworthy, Christopher, Bates, Myles, Roberts, Gethin and Gibbons, Gregory John (2019) Integrated manufacture of polymer and conductive tracks for real-world applications. Additive Manufacturing, 29 . 100777. doi:10.1016/j.addma.2019.06.028 ISSN 2214-8604 .

2018

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2018) Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion. Additive Manufacturing, 24 . pp. 552-559. doi:10.1016/j.addma.2018.10.040 ISSN 2214-8604 .

Gu, Chao, Gao, Steven, Izquierdo, Benito Sanz, Gibbons, Gregory John, Young, Paul R., Parker, Edward A., Qin, Fan, Wen, Geyi, Cheng, Zhiqun, Geng, Youlin and Liu, Ying (2018) Wideband high-gain millimetre/submillimetre wave antenna using additive manufacturing. IET Microwaves, Antennas & Propagation, 12 (11). pp. 1758-1764. doi:10.1049/iet-map.2018.5412 ISSN 1751-8725.

McEwen, Iain, Cooper, David E., Warnett, Jason M., Kourra, Nadia, Williams, M. A. and Gibbons, Gregory John (2018) Design & manufacture of a high-performance bicycle crank by additive manufacturing. Applied Sciences, 8 (8). 1360. doi:10.3390/app8081360 ISSN 2076-3417.

2017

Moztarzadeh, Hadi, Hughes, Darren J., Seth, Sampan, Keating, Elspeth, Kirachi, Ercihan , Gibbons, Gregory John and Dashwood, R. J. (2017) Evolution of residual stresses in linear deposition wire-based cladding of Ti-6Al-4V. In: 8th International Conference on Mechanical Stress Evaluation by Neutron & Synchrotron Radiation MACASENS 2015, Grenoble, France, 30 Sep -2 Oct 2015. Published in: Materials Science Forum, 905 pp. 101-106. doi:10.4028/www.scientific.net/MSF.905.101 ISSN 1662-9752.

Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John (2017) Inkjet-printed polyvinyl alcohol multilayers. Journal of Visualized Experiments, 123 . e55093. doi:10.3791/55093 ISSN 1940-087X.

2016

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2016) Development of a direct feed fused deposition modelling technology for multi-material manufacturing. In: 19th International Conference on Material Forming – ESAFORM 2016, Nantes, France, 26-29 Apr 2016. Published in: ESAFORM 2016 : Proceedings of the 19th international ESAFORM conference on material forming 190004 . ISBN 9780735414273.

Kueh, Audrey, Warnett, Jason M., Gibbons, Gregory John, Brettschneider, Julia, Nichols, Thomas E., Williams, M. A. and Kendall, W. S. (2016) Modelling the penumbra in computed tomography. Journal of X-Ray Science and Technology, 24 (4). pp. 583-597. doi:10.3233/XST-160576

Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John (2016) Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications. Journal of Applied Polymer Science, 133 (25). 43572. doi:10.1002/app.43572 ISSN 0021-8995.

Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John (2016) Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications. In: The 8th International Conference on Advanced Materials ROCAM, Bucharest, Romania, 7-10 Jul 2015. Published in: Journal of Applied Polymer Science, 133 (25). p. 43572. doi:10.1002/app.43572 ISSN 0021-8995.

Kueh, Audrey, Warnett, J. W., Gibbons, Gregory John, Brettschneider, Julia, Nichols, Thomas E., Williams, M. A. (Mark A.) and Kendall, W. S. (2016) Data for Modelling the Penumbra in Computed Tomography. [Dataset]

2015

Cooper, David E., Thornby, John Albert, Blundell, N., Henrys, R., Williams, M. A. and Gibbons, Gregory John (2015) Design and manufacture of high performance hollow engine valves by Additive Layer Manufacturing. Materials & Design, Volume 69 . pp. 44-55. doi:10.1016/j.matdes.2014.11.017 ISSN 0264-1275.

Cox, Sophie C., Thornby, John Albert, Gibbons, Gregory John, Williams, M. A. and Mallick, Kajal (2015) 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. Materials Science and Engineering : C , Volume 47 . pp. 237-247. doi:10.1016/j.msec.2014.11.024 ISSN 0928-4931.

Jones, Jason Blair, Wimpenny, D. I. and Gibbons, Gregory John (2015) Additive manufacturing under pressure. Rapid Prototyping Journal, 21 (1). pp. 89-97. doi:10.1108/RPJ-02-2013-0016 ISSN 1355-2546.

2014

Singh, A., Cooper, David E., Blundell, N., Pratihar, D. K. and Gibbons, Gregory John (2014) Modelling of weld-bead geometry and hardness profile in laser welding of plain carbon steel using neural networks and genetic algorithms. International Journal of Computer Integrated Manufacturing , Volume 27 (Number 7). doi:10.1080/0951192X.2013.834469 ISSN 0951-192X.

2013

Cooper, David E., Blundell, N., Maggs, Steven J. and Gibbons, Gregory John (2013) Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation. Journal of Materials Processing Technology, Volume 213 (Number 12). pp. 2191-2200. doi:10.1016/j.jmatprotec.2013.06.021 ISSN 0924-0136.

Cooper, David E., Thornby, John Albert, Gibbons, Gregory John, Williams, M. A. and Blundell, N. (2013) New-age intakes. Race Engine Technology, November . p. 14.

Singh, A., Cooper, David E., Blundell, N., Gibbons, Gregory John and Pratihar, D. K. (2013) Modelling of direct metal laser sintering of EOS DM20 bronze using neural networks and genetic algorithms. In: 37th International MATADOR Conference, Manchester, 25-27 Jul 2012. Published in: Proceedings of the 37th International MATADOR Conference ISBN 9781447144793.

2012

Cooper, David E., Stanford, Mark, Kibble, Kevin A. and Gibbons, Gregory John (2012) Additive manufacturing for product improvement at Red Bull Technology. Materials & Design, Vol.41 . pp. 226-230. doi:10.1016/j.matdes.2012.05.017 ISSN 02613069.

Cooper, David E., Attridge, Alex, Blundell, N., Thornby, John Albert, Williams, M. A. and Gibbons, Gregory John (2012) Fast track to winning performance : innovative induction. In: EPSRC Manufacturing the Future, Loughborough University, 19-20 Sept 2012

Wimpenny, D. I., Gibbons, Gregory John, Cooper, David E. and Jones, Jason Blair (2012) Gateways toward dissimilar multi-material parts. In: RAPID 2012 and 3D IMAGING Conferences & Exposition, Society of Manufacturing Engineers, Atlanta, GA., 22-25 May 2012 (TP12PUB36).

Cooper, David E., Thornby, J., Blundell, N., Attridge, Alex, Williams, M. A. and Gibbons, Gregory John (2012) Fast track to winning performance : innovative induction. In: 1st Annual EPSRC Manufacturing the Future Conference, Loughborough University, UK, 19-20 Sep 2012 (Unpublished)

Timmerman, B., Gibbons, Gregory John and Bryanston-Cross, P. (2012) Flow measurements in patient specific conducting airways models. In: 16th Int Symp on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 9-12 Jul 2012

Norman, D. G., Burnett, B., Gibbons, G. J., Barnes-Warden, J. and Williams, M. A. (2012) Re-engineering forensic anthropology : new techniques in sharp force trauma analysis. In: URSS Research Seminar 2012, University of Warwick, 12 Oct 2012

Jones, Jason Blair, Wimpenny, D. I. and Gibbons, Gregory John (2012) The influence of residual toner charge on 3D laser printed objects. In: IS&T's NIP28 and Digital Fabrication 2012, Quebec, Canada, 9-13 Sep 2012. Published in: NIP28: 28th international conference on digital printing technologies : technical program and proceedings : Digital fabrication 2012 pp. 327-331. ISBN 9780892083022.

2011

Jones, Jason Blair, Wimpenny, D. I., Chudasama, R. and Gibbons, Gregory John (2011) Printed circuit boards by selective deposition and processing. In: 22nd Solid Freeform Fabrication Symposium, Austin Texas, 8-10 Aug 2011. Published in: 22nd Solid Freeform Fabrication Symposium pp. 639-656.

Jones, Jason Blair, Gibbons, Gregory John and Wimpenny, D. I. (2011) Transfer methods toward additive manufacturing by electrophotography. In: IS&T's NIP27 and Digital Fabrication 2011, Minneapolis, Minnesota, USA, 3-5 Oct 2011 pp. 180-184. ISBN 9780892082964.

2010

Gibbons, Gregory John (2010) Electron beam melted direct tool steel injection mould onserts. Injection World . ISSN 2052-9376.

Gibbons, Gregory John, Williams, Reuben, Purnell, Phil and Farahi, Elham (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. doi:10.1179/174367509X12472364600878 ISSN 1743-6761.

Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. doi:10.1243/09544100JAERO583 ISSN 0954-4100.

Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. doi:10.1243/09544100JAERO582 ISSN 0954-4100.

Cooper, David E., Dickens, D., Dipple , S., Gibbons, Gregory John, Gibson, A. T., Maggs, S., Wakelin, M. P. and Wilkins, M. G. (2010) Additive manufacture for the design of a single seat racing car. In: 11th National Conference on Rapid Prototyping, Design and Manufacturing, Lancaster University, UK, 11 Jun 2010

Jones, Jason Blair, Wimpenny, D. I., Gibbons, Gregory John and Sutcliffe, Caroline (2010) Additive manufacturing by electrophotography : challenges and successes. In: IS&T's NIP26 and Digital Fabrication 2010, Austin, Texas, USA, 21-24 Sep 2010

Cooper, David E., Gibbons, Gregory John, Maggs, Steven J., Box, C. and McDonald, R. J. (2010) Additive subtractions. Race Engine Technology . pp. 70-73. ISSN 1740-6803.

2009

Gibbons, Gregory John, Hansell, R. G., Thacker, G. and Arnett, G. (2009) State of the art in low-cost, rapid composite forming tooling technologies. Journal of Advanced Materials, Vol.41 (No.2). pp. 5-19. ISSN 1070-9789.

Cooper, David E., Nevey, S. and Gibbons, Gregory John (2009) Assessment of laser sintered titanium for hydraulic systems at Red Bull racing. In: Time Compression Technologies Conference, Coventry, UK, 20-21 Oct 09

Cooper , D. E., Gibbons, Gregory John and Stanford, M. (2009) DMLS for product improvement at Red Bull technology. In: 10th National Conference on Rapid Design, Prototyping & Manufacturing, High Wycombe, Bucks, UK, 12 Jun 2009

Cooper, David E. and Gibbons, Gregory John (2009) Digital age manufacturing. Race Engine Technology . ISSN 1740-6803.

Cooper, David E., Gibbons, Gregory John, Stanford, Mark and Kibble, Kevin A. (2009) E-Manufacturing for product improvement at Red Bull technology. In: 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, 8-10 Sep 2009

Happa, Jassim, Williams, M. A., Turley, Glen A., Earl, Graeme, Dubla, Piotr, Beale, Gareth, Gibbons, Gregory John, Debattista, Kurt and Chalmers, Alan (2009) Virtual relighting of a Roman statue head from Herculaneum. In: AFRIGRAPH '09 6th International Conference on Computer Graphics, Virtual Reality, Visualisation and Interaction in Africa, Pretoria, South Africa, 04-06 Feb 2009 . Published in: Proceedings of the 6th International Conference on Computer Graphics, Virtual Reality, Visualisation and Interaction in Africa pp. 5-12. doi:10.1145/1503454.1503456 ISSN 9781605584287 .

2008

Gibbons, Gregory John and Hansell, Robert George (2008) Thermal-sprayed coatings on aluminium for mould tool protection and upgrade. Journal of Materials Processing Technology, Vol.204 (No.1-3). pp. 184-191. doi:10.1016/j.jmatprotec.2007.11.032 ISSN 0924-0136.

Gibbons, Gregory John (2008) RP&M technologies. In: Contact Knowledge Exchange Additive Layer Manufacturing Seminar, Telford, UK, 5 Jun 2008

2006

Gibbons, Gregory John and Hansell, Robert George (2006) Down-selection and optimization of thermal-sprayed coatings for aluminum mould tool protection and upgrade. Journal of Thermal Spray Technology, Volume 15 (Number 3). pp. 340-347. doi:10.1361/105996306X124329 ISSN 1059-9630.

Cooke, W., Tomlinson, R. A., Gibbons, Gregory John and Calvert, G. C. (2006) Stereolithography for 3D photoelasticity. In: Photomechanics 2006, Loughborough University, 9-12 Jul 2006

2004

Norwood, A. J., Dickens, P. M., Soar, R. C., Harris, R., Gibbons, Gregory John and Hansell, R. (2004) Analysis of cooling channels performance. International Journal of Computer Integrated Manufacturing , 17 (8). pp. 669-678. doi:10.1080/0951192042000237528 ISSN 0951-192X.

2003

Wimpenny, D. I. and Gibbons, Gregory John (2003) Metal spray tooling for composite forming. Journal of Materials Processing Technology, 138 (1–3). pp. 443-448. doi:10.1016/S0924-0136(03)00114-6 ISSN 0924-0136.

Gibbons, Gregory John, Hansell, Robert G., Norwood, A. J. and Dickens, P. M. (2003) Rapid laminated die-cast tooling. Assembly Automation, 23 (4). pp. 372-381. doi:10.1108/01445150310501208 ISSN 0144-5154.

2000

Gibbons, Gregory John and Wimpenny, D. I. (2000) Mechanical and thermomechanical properties of metal spray invar for composite forming tooling. Journal of Materials Engineering and Performance, 9 (6). pp. 630-637. doi:10.1361/105994900770345485 ISSN 1059-9495.

Gibbons, Gregory John (2000) Metal spray Invar tooling for composites. Aircraft Engineering and Aerospace Technology, 72 (5). pp. 430-439. ISSN 1748-8842.

1996

Gibbons, Gregory John (1996) Polyorganosiloxanes as electronic device encapsulants. PhD thesis, University of Warwick.