The Library
Browse by Warwick Author
Up a level |
Jump to: Health Data Research (HDR) UK | APC10 TUCANA 113198 | Advantage West Midlands (AWM) | BAE SYSTEMS (Firm) | BAE SYSTEMS (Firm)β | China Scholarship Council (CSC) | EPSRC Future Composites Manufacturing Hub (grant number EP/P006701/1) | EPSRC Future Metrology Hub (grant number EP/P006930)1 | Engineering and Physical Sciences Research Council (EPSRC) | European Regional Development Fund (ERDF) | Germany. Bundesministerium fΓΌr Bildung und Forschung (BMBF) | High Value Manufacturing Catapult | Higher Education Funding Council for England (HEFCE) | Human Factors Research Group, University of Nottingham | Jaguar Land Rover (Firm) | Nikon Metrology (Firm) | Regional Development Agencies (England) (RDA) | Royal Society (Great Britain). Wolfson Research Merit Award (RSWRMA) | STFC via an Ernest Rutherford Fellowship (ST/R00384X/1) | Tata Steel | Technology Strategy Board (Great Britain) | UK India Education Research Initiative (UKIERI) | UK-India Education Research Initiative (UKIERI) | University Hospitals Coventry and Warwickshire NHS Trust | University of Birmingham | University of Manchester. Knowledge and Innovation Hub for Environmental Sustainability (KIHES) | University of Warwick | University of Warwick WMG HVM Catapult for Light Metals Research | Warwick Manufacturing Group | Wright Medical Group, Inc. | none
Number of items: 83.
Health Data Research (HDR) UK
Bhalodiya, Jayendra Maganbhai, Palit, Arnab, Giblin, Gerard, Tiwari, Manoj Kumar, Prasad, Sanjay K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, M. A. (2021) Identifying myocardial infarction using hierarchical template matchingβbased myocardial strain : algorithm development and usability study. JMIR Medical Informatics, 9 (2). e22164. doi:10.2196/22164 ISSN 2291-9694.
APC10 TUCANA 113198
Fereshteh-Saniee, Nessa, Reynolds, Neil, Norman, Danielle, Qian, Connie, Armstrong, David J., Smith, Paul, Kupke, Richard, Williams, Mark A. and Kendall, Kenneth N. (2022) Quality analysis of weld-line defects in carbon fibre reinforced sheet moulding compounds by automated eddy current scanning. Journal of Manufacturing and Materials Processing, 6 (6). 151. doi:10.3390/jmmp6060151 ISSN 2504-4494.
Advantage West Midlands (AWM)
Turley, Glen A., Kiraci, Ercihan, Olifent, Alan, Attridge, Alex, Tiwari, Manoj K. and Williams, M. A. (Mark A.) (2014) Evaluation of a multi-sensor horizontal dual arm coordinate measuring machine for automotive dimensional inspection. The International Journal of Advanced Manufacturing Technology, Volume 72 (Number 9-11). pp. 1665-1675. doi:10.1007/s00170-014-5737-3 ISSN 0268-3768.
Thornby, J. A., Landheer, D., Williams, T., Barnes-Warden, J., Fenne, P., Norman, D. G., Attridge, A. and Williams, M. A. (2014) Inconsistency in 9 mm bullets : correlation of jacket thickness to post-impact geometry measured with non-destructive X-ray computed tomography. Forensic Science International, 234 . pp. 111-119. ISSN 0379-0738.
Thornby, John Albert, Landheer, Dirk, Williams, Tim, Barnes-Warden, Jane, Fenne, Paul, Attridge, Alex and Williams, M. A. (2012) Inconsistency of threat level in soft armour standards, correlation of experimental tests to bullet X-ray 3D images. In: Personal Armour Systems Symposium, Nuremberg, Germany, 17-21 Sept 2012. Published in: Proceedings of the Personal Armour Systems Symposium
Abulrub, Abdul-Hadi G., Yin, Yanting and Williams, M. A. (Mark A.) (2012) Acceptance and management of innovation in SMEs: immersive 3D visualisation. In: International Conference on Leadership, Technology and Innovation Management 2011, Antalya, Turkey, Oct 21-23, 2011. Published in: Procedia - Social and Behavioral Sciences, 41 pp. 304-314. doi:10.1016/j.sbspro.2012.04.035 ISSN 1877-0428.
Pitts, Matthew J., Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Evaluating user response to in-car haptic feedback touchscreens using the Lane Change Test. Advances in Human-Computer Interaction, 2012 . Article number 598739. doi:10.1155/2012/598739 ISSN 1687-5893.
Kumar, Jagadeesha, Landheer, Dirk, Barnes-Warden, Jane, Fenne, Paul, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Inconsistency in 9mm bullets measured with non-destructive X-ray computed tomography. Forensic Science International, Vol.214 (No.1-3). pp. 48-58. doi:10.1016/j.forsciint.2011.07.018 ISSN 03790738.
Pitts, Matthew J., Burnett, Gary, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Visualβhaptic feedback interaction in automotive touchscreens. Displays, Vol.33 (No.1). pp. 7-16. doi:10.1016/j.displa.2011.09.002 ISSN 0141-9382.
Wood, P. K. C., Schley, C. A. (Claus A.), Williams, M. A. (Mark A.) and Rusinek, A. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials & Design, Volume 32 (Number 4). pp. 2246-2259. doi:10.1016/j.matdes.2010.11.018 ISSN 0264-1275.
Kumar, Jagadeesha, Attridge, Alex, Wood, P. K. C. and Williams, M. A. (Mark A.) (2011) Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement. Measurement Science and Technology, Volume 22 (Number 3). Article: 035105. doi:10.1088/0957-0233/22/3/035105 ISSN 0957-0233.
Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, C. (Charles) (2010) Understanding customers' holistic perception of switches in automotive humanβmachine interfaces. Applied Ergonomics, Vol.41 (No.1). pp. 8-17. doi:10.1016/j.apergo.2009.03.004 ISSN 0003-6870.
BAE SYSTEMS (Firm)
Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart and Williams, M. A. (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. doi:10.1007/s00170-016-8691-4 ISSN 0268-3768.
Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Kiraci, Ercihan, Gupta, Aniruddha, Barnes, Stuart and Williams, M. A. (Mark A.) (2015) Metrological study of CFRP drilled holes with x-ray computed tomography. The International Journal of Advanced Manufacturing Technology, 78 (9-12). pp. 2025-2035. doi:10.1007/s00170-014-6734-2 ISSN 0268-3768.
BAE SYSTEMS (Firm)β
Kourra, Nadia, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Metrological investigation of radiation filtration in x-ray computed tomography. In: Instrumentation and Measurement Technology Conference (I2MTC), Torino, Italy, Italy, 22-25 May 2017. Published in: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), pp. 1-6. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969797
China Scholarship Council (CSC)
Ou, Xiaoxia, Xu, Shaojun, Warnett, Jason M., Holmes, Stuart M., Zaheer, Amber, Garforth, Arthur A., Williams, M. A., Jiao, Yilai and Fan, Xiaolei (2017) Creating hierarchies promptly : microwave-accelerated synthesis of ZSM-5 zeolites on macrocellular silicon carbide (SiC) foams. Chemical Engineering Journal, 312 . pp. 1-9. doi:10.1016/j.cej.2016.11.116 ISSN 1385-8947.
EPSRC Future Composites Manufacturing Hub (grant number EP/P006701/1)
Fereshteh-Saniee, Nessa, Reynolds, Neil, Norman, Danielle, Qian, Connie, Armstrong, David J., Smith, Paul, Kupke, Richard, Williams, Mark A. and Kendall, Kenneth N. (2022) Quality analysis of weld-line defects in carbon fibre reinforced sheet moulding compounds by automated eddy current scanning. Journal of Manufacturing and Materials Processing, 6 (6). 151. doi:10.3390/jmmp6060151 ISSN 2504-4494.
EPSRC Future Metrology Hub (grant number EP/P006930)1
Fereshteh-Saniee, Nessa, Reynolds, Neil, Norman, Danielle, Qian, Connie, Armstrong, David J., Smith, Paul, Kupke, Richard, Williams, Mark A. and Kendall, Kenneth N. (2022) Quality analysis of weld-line defects in carbon fibre reinforced sheet moulding compounds by automated eddy current scanning. Journal of Manufacturing and Materials Processing, 6 (6). 151. doi:10.3390/jmmp6060151 ISSN 2504-4494.
Engineering and Physical Sciences Research Council (EPSRC)
Spooner, Stephen, Rahnama, Alireza, Warnett, Jason M., Williams, M. A., Li, Zushu and Sridhar, Seetharaman (2017) Quantifying the pathway and predicting spontaneous emulsification during material exchange in a two phase liquid system. Scientific Reports, 7 (1). 14384. doi:10.1038/s41598-017-14638-9 ISSN 2045-2322.
Kourra, Nadia, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Metrological investigation of radiation filtration in x-ray computed tomography. In: Instrumentation and Measurement Technology Conference (I2MTC), Torino, Italy, Italy, 22-25 May 2017. Published in: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), pp. 1-6. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969797
Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart and Williams, M. A. (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. doi:10.1007/s00170-016-8691-4 ISSN 0268-3768.
Warnett, Jason M., Titarenko, Valeriy, Kiraci, Ercihan, Attridge, Alex, Lionheart, William R. B., Withers, Philip J. and Williams, M. A. (2016) Towards in-process x-ray CT for dimensional metrology. Measurement Science and Technology, 27 (3). pp. 1-14. 035401. doi:10.1088/0957-0233/27/3/035401 ISSN 0957-0233.
Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Kiraci, Ercihan, Gupta, Aniruddha, Barnes, Stuart and Williams, M. A. (Mark A.) (2015) Metrological study of CFRP drilled holes with x-ray computed tomography. The International Journal of Advanced Manufacturing Technology, 78 (9-12). pp. 2025-2035. doi:10.1007/s00170-014-6734-2 ISSN 0268-3768.
Pitts, Matthew J., HasedΕΎiΔ, Elvir, Skrypchuk, Lee, Attridge, Alex and Williams, M. A. (Mark A.) (2015) Adding depth : establishing 3D display fundamentals for automotive applications. In: SAE 2015 World Congress & Exhibition, Detroit, Michigan, USA, 21-23 Apr 2015. Published in: SAE Technical Papers, 1 (2015-01-0147). doi:10.4271/2015-01-0147 ISSN 0148-7191.
Pitts, Matthew J., Skrypchuk, Lee, Attridge, Alex and Williams, M. A. (Mark A.) (2014) Comparing the user experience of touchscreen technologies in an automotive application. In: AutomotiveUI '14, Seattle, USA, 17-19 Sep 2014. Published in: Proceedings of the 6th International Conference on Automotive User Interfaces and Interactive Vehicular Applications pp. 1-8. ISBN 9781450332125 . doi:10.1145/2667317.2667418
Turley, Glen A., Griffin, Damian R. and Williams, M. A. (Mark A.) (2014) Effect of femoral neck modularity upon the prosthetic range of motion in total hip arthroplasty. Medical & Biological Engineering & Computing, Volume 52 (Number 8). pp. 685-694. doi:10.1007/s11517-014-1171-9 ISSN 0140-0118.
White, Claire Louise, Attridge, Alex, Williams, M. A. (Mark A.), Skrypchuk, Lee and HasedΕΎiΔ, Elvir (2013) Recreating daylight for readability assessments of in-vehicle displays. In: SID 20th Annual Symposium on Vehicle Displays , University of Michigan-Dearborn, Dearborn MI, 10-11 Oct 2013
Turley, Glen A., Williams, M. A. (Mark A.), Wellings, R. M. (Richard M.) and Griffin, Damian R. (2012) Evaluation of range of motion restriction within the hip joint. Medical & Biological Engineering & Computing, Vol.51 (No.4). pp. 467-477. doi:10.1007/s11517-012-1016-3 ISSN 1741-0444.
Turley, Glen A., Ahmed, Shahbaz M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2012) Validation of the femoral anteversion measurement method used in imageless navigation. Computer Aided Surgery, Vol.17 (No.4). pp. 187-197. doi:10.3109/10929088.2012.690230 ISSN 1092-9088.
Turley, Glen A., Ahmed, S. M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2011) Establishing a range of motion boundary for total hip arthroplasty. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, Vol.225 (No.8). pp. 769-782. doi:10.1177/0954411911409306 ISSN 2041-3033.
Williams, M. A. (Mark A.), Attridge, Alex and Pitts, Matthew J. (2011) User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4). pp. 119-138. doi:10.1504/IJVD.2011.040579 ISSN 0143-3369.
Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, C. (Charles) (2010) Understanding customers' holistic perception of switches in automotive humanβmachine interfaces. Applied Ergonomics, Vol.41 (No.1). pp. 8-17. doi:10.1016/j.apergo.2009.03.004 ISSN 0003-6870.
Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew J. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. doi:10.1016/j.foodqual.2008.03.004 ISSN 0950-3293.
Williams, M. A. (Mark A.) and Kochhar, A. K. (2000) New product introduction practices in the British manufacturing industry. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (10). pp. 853-863. doi:10.1243/0954405001517946 ISSN 0954-4054.
European Regional Development Fund (ERDF)
Turley, Glen A., Kiraci, Ercihan, Olifent, Alan, Attridge, Alex, Tiwari, Manoj K. and Williams, M. A. (Mark A.) (2014) Evaluation of a multi-sensor horizontal dual arm coordinate measuring machine for automotive dimensional inspection. The International Journal of Advanced Manufacturing Technology, Volume 72 (Number 9-11). pp. 1665-1675. doi:10.1007/s00170-014-5737-3 ISSN 0268-3768.
Thornby, J. A., Landheer, D., Williams, T., Barnes-Warden, J., Fenne, P., Norman, D. G., Attridge, A. and Williams, M. A. (2014) Inconsistency in 9 mm bullets : correlation of jacket thickness to post-impact geometry measured with non-destructive X-ray computed tomography. Forensic Science International, 234 . pp. 111-119. ISSN 0379-0738.
Thornby, John Albert, Landheer, Dirk, Williams, Tim, Barnes-Warden, Jane, Fenne, Paul, Attridge, Alex and Williams, M. A. (2012) Inconsistency of threat level in soft armour standards, correlation of experimental tests to bullet X-ray 3D images. In: Personal Armour Systems Symposium, Nuremberg, Germany, 17-21 Sept 2012. Published in: Proceedings of the Personal Armour Systems Symposium
Abulrub, Abdul-Hadi G., Yin, Yanting and Williams, M. A. (Mark A.) (2012) Acceptance and management of innovation in SMEs: immersive 3D visualisation. In: International Conference on Leadership, Technology and Innovation Management 2011, Antalya, Turkey, Oct 21-23, 2011. Published in: Procedia - Social and Behavioral Sciences, 41 pp. 304-314. doi:10.1016/j.sbspro.2012.04.035 ISSN 1877-0428.
Pitts, Matthew J., Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Evaluating user response to in-car haptic feedback touchscreens using the Lane Change Test. Advances in Human-Computer Interaction, 2012 . Article number 598739. doi:10.1155/2012/598739 ISSN 1687-5893.
Kumar, Jagadeesha, Landheer, Dirk, Barnes-Warden, Jane, Fenne, Paul, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Inconsistency in 9mm bullets measured with non-destructive X-ray computed tomography. Forensic Science International, Vol.214 (No.1-3). pp. 48-58. doi:10.1016/j.forsciint.2011.07.018 ISSN 03790738.
Pitts, Matthew J., Burnett, Gary, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Visualβhaptic feedback interaction in automotive touchscreens. Displays, Vol.33 (No.1). pp. 7-16. doi:10.1016/j.displa.2011.09.002 ISSN 0141-9382.
Kumar, Jagadeesha, Attridge, Alex, Wood, P. K. C. and Williams, M. A. (Mark A.) (2011) Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement. Measurement Science and Technology, Volume 22 (Number 3). Article: 035105. doi:10.1088/0957-0233/22/3/035105 ISSN 0957-0233.
Williams, M. A. (Mark A.), Attridge, Alex and Pitts, Matthew J. (2011) User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4). pp. 119-138. doi:10.1504/IJVD.2011.040579 ISSN 0143-3369.
Germany. Bundesministerium fΓΌr Bildung und Forschung (BMBF)
Palit, Arnab, Williams, M. A., Turley, Glen A., Renkawitz, Tobias and Weber, Markus (2017) Femur first navigation can reduce impingement severity compared to traditional free hand total hip arthroplasty. Scientific Reports, 7 (1). 7238. doi:10.1038/s41598-017-07644-4 ISSN 2045-2322.
High Value Manufacturing Catapult
Spooner, Stephen, Rahnama, Alireza, Warnett, Jason M., Williams, M. A., Li, Zushu and Sridhar, Seetharaman (2017) Quantifying the pathway and predicting spontaneous emulsification during material exchange in a two phase liquid system. Scientific Reports, 7 (1). 14384. doi:10.1038/s41598-017-14638-9 ISSN 2045-2322.
Kiraci, Ercihan, Franciosa, Pasquale, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Non-reproducible alignment and fitting algorithm effects on Laser Radar measurement. In: I2MTC 2017 IEEE International Instrumentation and Measurement Technology Conference, Torino, Italy, 22-25 May 2017 pp. 1-5. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969967
Kiraci, Ercihan, Franciosa, Pasquale, Turley, Glen A., Olifent, Alan, Attridge, Alex and Williams, M. A. (2017) Moving towards in-line metrology : evaluation of a Laser Radar system for in-line dimensional inspection for automotive assembly systems. International Journal of Advanced Manufacturing Technology, 91 (1-4). pp. 69-78. doi:10.1007/s00170-016-9696-8 ISSN 0268-3768.
Kiraci, Ercihan, Turley, Glen A., Attridge, Alex, Olifent, Alan and Williams, M. A. (Mark A.) (2016) Evaluating the capability of laser scanning to measure an automotive artefact : a comparison study of touch trigger probe and laser-scanning. International Journal of Productivity and Quality Management, 18 (4). pp. 440-455. doi:10.1504/IJPQM.2016.077776 ISSN 1746-6482.
Turley, Glen A., Kiraci, Ercihan, Olifent, Alan, Attridge, Alex, Tiwari, Manoj K. and Williams, M. A. (Mark A.) (2014) Evaluation of a multi-sensor horizontal dual arm coordinate measuring machine for automotive dimensional inspection. The International Journal of Advanced Manufacturing Technology, Volume 72 (Number 9-11). pp. 1665-1675. doi:10.1007/s00170-014-5737-3 ISSN 0268-3768.
Higher Education Funding Council for England (HEFCE)
Warnett, Jason M., Titarenko, Valeriy, Kiraci, Ercihan, Attridge, Alex, Lionheart, William R. B., Withers, Philip J. and Williams, M. A. (2016) Towards in-process x-ray CT for dimensional metrology. Measurement Science and Technology, 27 (3). pp. 1-14. 035401. doi:10.1088/0957-0233/27/3/035401 ISSN 0957-0233.
Human Factors Research Group, University of Nottingham
Pitts, Matthew J., Burnett, Gary, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Visualβhaptic feedback interaction in automotive touchscreens. Displays, Vol.33 (No.1). pp. 7-16. doi:10.1016/j.displa.2011.09.002 ISSN 0141-9382.
Jaguar Land Rover (Firm)
Kiraci, Ercihan, Turley, Glen A., Attridge, Alex, Olifent, Alan and Williams, M. A. (Mark A.) (2016) Evaluating the capability of laser scanning to measure an automotive artefact : a comparison study of touch trigger probe and laser-scanning. International Journal of Productivity and Quality Management, 18 (4). pp. 440-455. doi:10.1504/IJPQM.2016.077776 ISSN 1746-6482.
Pitts, Matthew J., HasedΕΎiΔ, Elvir, Skrypchuk, Lee, Attridge, Alex and Williams, M. A. (Mark A.) (2015) Adding depth : establishing 3D display fundamentals for automotive applications. In: SAE 2015 World Congress & Exhibition, Detroit, Michigan, USA, 21-23 Apr 2015. Published in: SAE Technical Papers, 1 (2015-01-0147). doi:10.4271/2015-01-0147 ISSN 0148-7191.
Pitts, Matthew J., Skrypchuk, Lee, Attridge, Alex and Williams, M. A. (Mark A.) (2014) Comparing the user experience of touchscreen technologies in an automotive application. In: AutomotiveUI '14, Seattle, USA, 17-19 Sep 2014. Published in: Proceedings of the 6th International Conference on Automotive User Interfaces and Interactive Vehicular Applications pp. 1-8. ISBN 9781450332125 . doi:10.1145/2667317.2667418
Nikon Metrology (Firm)
Kiraci, Ercihan, Turley, Glen A., Attridge, Alex, Olifent, Alan and Williams, M. A. (Mark A.) (2016) Evaluating the capability of laser scanning to measure an automotive artefact : a comparison study of touch trigger probe and laser-scanning. International Journal of Productivity and Quality Management, 18 (4). pp. 440-455. doi:10.1504/IJPQM.2016.077776 ISSN 1746-6482.
Thornby, John Albert, MacKay, Robert S. and Williams, M. A. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. doi:10.1093/imamat/hxv020 ISSN 0272-4960.
Turley, Glen A., Griffin, Damian R. and Williams, M. A. (Mark A.) (2014) Effect of femoral neck modularity upon the prosthetic range of motion in total hip arthroplasty. Medical & Biological Engineering & Computing, Volume 52 (Number 8). pp. 685-694. doi:10.1007/s11517-014-1171-9 ISSN 0140-0118.
Turley, Glen A., Williams, M. A. (Mark A.), Wellings, R. M. (Richard M.) and Griffin, Damian R. (2012) Evaluation of range of motion restriction within the hip joint. Medical & Biological Engineering & Computing, Vol.51 (No.4). pp. 467-477. doi:10.1007/s11517-012-1016-3 ISSN 1741-0444.
Turley, Glen A., Ahmed, Shahbaz M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2012) Validation of the femoral anteversion measurement method used in imageless navigation. Computer Aided Surgery, Vol.17 (No.4). pp. 187-197. doi:10.3109/10929088.2012.690230 ISSN 1092-9088.
Turley, Glen A., Ahmed, S. M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2011) Establishing a range of motion boundary for total hip arthroplasty. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, Vol.225 (No.8). pp. 769-782. doi:10.1177/0954411911409306 ISSN 2041-3033.
Regional Development Agencies (England) (RDA)
Williams, M. A. (Mark A.), Attridge, Alex and Pitts, Matthew J. (2011) User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4). pp. 119-138. doi:10.1504/IJVD.2011.040579 ISSN 0143-3369.
Royal Society (Great Britain). Wolfson Research Merit Award (RSWRMA)
Warnett, Jason M., Titarenko, Valeriy, Kiraci, Ercihan, Attridge, Alex, Lionheart, William R. B., Withers, Philip J. and Williams, M. A. (2016) Towards in-process x-ray CT for dimensional metrology. Measurement Science and Technology, 27 (3). pp. 1-14. 035401. doi:10.1088/0957-0233/27/3/035401 ISSN 0957-0233.
STFC via an Ernest Rutherford Fellowship (ST/R00384X/1)
Fereshteh-Saniee, Nessa, Reynolds, Neil, Norman, Danielle, Qian, Connie, Armstrong, David J., Smith, Paul, Kupke, Richard, Williams, Mark A. and Kendall, Kenneth N. (2022) Quality analysis of weld-line defects in carbon fibre reinforced sheet moulding compounds by automated eddy current scanning. Journal of Manufacturing and Materials Processing, 6 (6). 151. doi:10.3390/jmmp6060151 ISSN 2504-4494.
Tata Steel
Spooner, Stephen, Rahnama, Alireza, Warnett, Jason M., Williams, M. A., Li, Zushu and Sridhar, Seetharaman (2017) Quantifying the pathway and predicting spontaneous emulsification during material exchange in a two phase liquid system. Scientific Reports, 7 (1). 14384. doi:10.1038/s41598-017-14638-9 ISSN 2045-2322.
Technology Strategy Board (Great Britain)
Thornby, John Albert, MacKay, Robert S. and Williams, M. A. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. doi:10.1093/imamat/hxv020 ISSN 0272-4960.
Sanders, Redland, Thornby, John Albert, Attridge, Alex, Hyde-Moxon, R., MacKay, Robert S., Stott, C., Williams, M. A. and Young, Ken W. (2010) Characteristics, accuracy and reverification of robotised articulated arm CMMs. In: 26th Coordinate Metrology Society Conference, Reno, Nevada, 20-24 July 2010. Published in: CMSC Online Archive ISSN 2328-6075.
Thornby, John Albert, Attridge, Alex, Johnson, T., MacKay, Robert S., Sanders, R., Stott, C., Williams, M. A. and Young, Ken W. (2009) Simulation, modelling and development of the metris RCA. In: 25th Coordinate Metrology Society Conference, Louisville, Kentucky, 20-24 July 2009. Published in: CMSC Online Archive ISSN 2328-6075.
UK India Education Research Initiative (UKIERI)
Dinda, Soumitra Kumar, Warnett, Jason M., Williams, Mark A., Roy, Gour Gopal and Srirangam, Prakash (2016) 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography. Materials & Design, 96 . pp. 224-231. doi:10.1016/j.matdes.2016.02.010 ISSN 0264-1275.
UK-India Education Research Initiative (UKIERI)
Mathew, James, Mandal, Animesh, Warnett, Jason M., Williams, Mark A., Chakraborty, M. and Srirangam, Prakash (2016) X-ray tomography studies on porosity and particle size distribution in cast in-situ Al-Cu-TiB2 semi-solid forged composites. Materials Characterization, 118 . pp. 57-64. doi:10.1016/j.matchar.2016.05.010 ISSN 1044-5803.
University Hospitals Coventry and Warwickshire NHS Trust
Turley, Glen A., Williams, M. A. (Mark A.), Wellings, R. M. (Richard M.) and Griffin, Damian R. (2012) Evaluation of range of motion restriction within the hip joint. Medical & Biological Engineering & Computing, Vol.51 (No.4). pp. 467-477. doi:10.1007/s11517-012-1016-3 ISSN 1741-0444.
Turley, Glen A., Ahmed, S. M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2011) Establishing a range of motion boundary for total hip arthroplasty. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, Vol.225 (No.8). pp. 769-782. doi:10.1177/0954411911409306 ISSN 2041-3033.
University of Birmingham
Turley, Glen A., Ahmed, Shahbaz M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2012) Validation of the femoral anteversion measurement method used in imageless navigation. Computer Aided Surgery, Vol.17 (No.4). pp. 187-197. doi:10.3109/10929088.2012.690230 ISSN 1092-9088.
Williams, M. A. (Mark A.), Attridge, Alex and Pitts, Matthew J. (2011) User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4). pp. 119-138. doi:10.1504/IJVD.2011.040579 ISSN 0143-3369.
University of Manchester. Knowledge and Innovation Hub for Environmental Sustainability (KIHES)
Ou, Xiaoxia, Xu, Shaojun, Warnett, Jason M., Holmes, Stuart M., Zaheer, Amber, Garforth, Arthur A., Williams, M. A., Jiao, Yilai and Fan, Xiaolei (2017) Creating hierarchies promptly : microwave-accelerated synthesis of ZSM-5 zeolites on macrocellular silicon carbide (SiC) foams. Chemical Engineering Journal, 312 . pp. 1-9. doi:10.1016/j.cej.2016.11.116 ISSN 1385-8947.
University of Warwick
Turley, Glen A., Ahmed, Shahbaz M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R. (2012) Validation of the femoral anteversion measurement method used in imageless navigation. Computer Aided Surgery, Vol.17 (No.4). pp. 187-197. doi:10.3109/10929088.2012.690230 ISSN 1092-9088.
University of Warwick WMG HVM Catapult for Light Metals Research
De Giovanni, Mario, Warnett, Jason M., Williams, Mark A., Haribabu, Nadendla and Srirangam, Prakash (2015) X-ray tomography investigation of intensive sheared AlβSiC metal matrix composites. Materials Characterization, 110 . pp. 258-263. doi:10.1016/j.matchar.2015.11.003 ISSN 1044-5803.
Warwick Manufacturing Group
Bhalodiya , Jayendra M., Palit, Arnab, Tiwari, Manoj K., Prasad, Sanjay K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, M. A. (2018) A novel hierarchical template matching model for cardiac motion estimation. Scientific Reports, 8 (1). 4475. doi:10.1038/s41598-018-22543-y ISSN 2045-2322.
Kiraci, Ercihan, Franciosa, Pasquale, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Non-reproducible alignment and fitting algorithm effects on Laser Radar measurement. In: I2MTC 2017 IEEE International Instrumentation and Measurement Technology Conference, Torino, Italy, 22-25 May 2017 pp. 1-5. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969967
Palit, Arnab, Franciosa, Pasquale, Bhudia, Sunil K., Arvanitis, Theodoros N., Turley, Glen A. and Williams, Mark A. (Antony) (2017) Passive diastolic modelling of human ventricles : effects of base movement and geometrical heterogeneity. Journal of Biomechanics, 52 . pp. 95-105. doi:10.1016/j.jbiomech.2016.12.023 ISSN 0021-9290.
Mathew, James, Mandal, Animesh, Warnett, Jason M., Williams, Mark A., Chakraborty, M. and Srirangam, Prakash (2016) X-ray tomography studies on porosity and particle size distribution in cast in-situ Al-Cu-TiB2 semi-solid forged composites. Materials Characterization, 118 . pp. 57-64. doi:10.1016/j.matchar.2016.05.010 ISSN 1044-5803.
Dinda, Soumitra Kumar, Warnett, Jason M., Williams, Mark A., Roy, Gour Gopal and Srirangam, Prakash (2016) 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography. Materials & Design, 96 . pp. 224-231. doi:10.1016/j.matdes.2016.02.010 ISSN 0264-1275.
Wright Medical Group, Inc.
Turley, Glen A., Griffin, Damian R. and Williams, M. A. (Mark A.) (2014) Effect of femoral neck modularity upon the prosthetic range of motion in total hip arthroplasty. Medical & Biological Engineering & Computing, Volume 52 (Number 8). pp. 685-694. doi:10.1007/s11517-014-1171-9 ISSN 0140-0118.
none
Baier, Waltraud, Donnelly, Michael, Payne, Mark and Williams, M. A. (Mark A.) (2020) A holistic multi-scale approach to using 3D scanning technology in accident reconstruction. Journal of Forensic Sciences . doi:10.1111/1556-4029.14405 ISSN 0022-1198.
This list was generated on Thu Mar 28 14:11:55 2024 GMT.