
The Library
Browse by Warwick Author
![]() | Up a level |
Number of items: 20.
2016
Devendrana, C., Billson, Duncan R., Hutchins, David A., Tuncay, A. and Neild, A. (2016) Optimisation of an acoustic resonator for particle manipulation in air. Sensors and Actuators B: Chemical, 224 . pp. 529-538. doi:10.1016/j.snb.2015.10.068
2015
Woodward, David I., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Leigh, Simon J. (2015) Additively-manufactured piezoelectric devices. Physica Status Solidi (a), 212 (10). pp. 2107-2113. doi:10.1002/pssa.201532272
Warwick Audio Technologies Ltd (2015) Improved electrostatic transducer. Intellectual Property Office no.GB2522932A [Online]..
Zhang, Yuning, Billson, Duncan R. and Li, Shengcai (2015) Influences of pressure amplitudes and frequencies of dual-frequency acoustic excitation on the mass transfer across interfaces of gas bubbles. International Communications in Heat and Mass Transfer, 66 . pp. 167-171. doi:10.1016/j.icheatmasstransfer.2015.05.026
2014
Leigh, Simon J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2014) Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors. Smart Materials and Structures, 23 (9). 095039. doi:10.1088/0964-1726/23/9/095039
2013
Sanderson, R. M., Hutchins, David A., Billson, Duncan R. and Mudge, P. J. (2013) The investigation of guided wave propagation around a pipe bend using an analytical modeling approach. The Journal of the Acoustical Society of America, Volume 133 (Number 3). pp. 1404-1414. doi:10.1121/1.4790349
2012
Leigh, Simon J., Bowen, J., Purssell, C. P., Covington, James A., Billson, Duncan R. and Hutchins, David A. (2012) Rapid manufacture of monolithic micro-actuated forceps inspired by echinoderm pedicellariae. Bioinspiration & Biomimetics, Vol.7 (No.4). Article: 044001. doi:10.1088/1748-3182/7/4/044001
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. doi:10.1371/journal.pone.0049365
Ho, K. S., Hutchins, David A., Billson, Duncan R., Li, M. H. and Gachagan, A. (2012) Extraction of texture in metal sheet using non-contact electromagnetic acoustic transducers (EMATS) and wavelet processing. In: 38th Annual Review of Progress in Quantitative Nondestructive Evaluation, QNDE, Burlington, VT; United States, 17-22 Jul 2011. Published in: AIP Conference Proceedings, Volume 1430 (Number 31). pp. 1373-1380. ISSN 0094-243X. doi:10.1063/1.4716377
2011
Cheneler, D., Bowen, J., Leigh, Simon J., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Ward, M. C. L. (2011) Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, Vol.111 (No.8). pp. 1214-1223. doi:10.1016/j.ultramic.2011.03.009
Leigh, Simon J., Purssell, C. P., Bowen, J., Hutchins, David A., Covington, James A. and Billson, Duncan R. (2011) A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin. Sensors and Actuators A: Physical, Vol.168 (No.1). pp. 66-71. doi:10.1016/j.sna.2011.03.058
Billson, Duncan R., Purssell, C. P., Leigh, Simon J. and Hutchins, David A. (2011) Rapid rototyping technologies for ultrasonic beam focussing in NDE. In: 2011 IEEE International Ultrasonics Symposium (IUS), Orlando, FL, 18-21 Oct 2011. Published in: 2011 IEEE International Ultrasonics Symposium (IUS) pp. 2472-2474. ISBN 9781457712531.
Hutchins, David A., Billson, Duncan R., Bradley, R. J. and Ho, K. S. (2011) Structural health monitoring using polymer-based capacitive micromachined ultrasonic transducers (CMUTs). Ultrasonics, Vol.51 (No.8). pp. 870-877. doi:10.1016/j.ultras.2011.04.004
2008
Ho, K. S., Bradley, R. J., Billson, Duncan R. and Hutchins, David A. (2008) Micro-stereolithography as a transducer design method. Ultrasonics, Vol.48 (No.1). pp. 1-5. doi:10.1016/j.ultras.2007.07.001
2007
Medley, A. P., Billson, Duncan R., Hutchins, David A. and Neild, A. (2007) Acoustic fields of nonplanar radiators. Journal of the Acoustical Society of America , Vol.122 (No.5 Part 1). pp. 2587-2593. doi:10.1121/1.2783117
Ho, K. S., Billson, Duncan R. and Hutchins, David A. (2007) Inspection of drinks cans using non-contact electromagnetic acoustic transducers. Journal of Food Engineering, Vol.80 (No.2). pp. 431-444. doi:10.1016/j.jfoodeng.2006.04.025
Ho, K. S., Billson, Duncan R. and Hutchins, David A. (2007) Ultrasonic Lamb wave tomography using scanned EMATs and wavelet processing. Nondestructive Testing and Evaluation, Vol.22 (No.1). pp. 19-34. doi:10.1080/10589750701327890
2006
Medley, A. P., Billson, Duncan R., Hutchins, David A. and Davis, L. A. J. (2006) Properties of an electrostatic transducer. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 120 (5 Part 1). pp. 2658-2667. doi:10.1121/1.2357702
Bradley, R. J., Billson, Duncan R. and Hutchins, David A. (2006) Novel capacitive ultrasonic transducers fabricated using microstereolithography. In: IEEE Ultrasonics Symposium, Vancouver, Canada, 03-06 Oct 2006. Published in: IEEE International Ultrasonics Symposium. Proceedings pp. 2381-2384. ISBN 978-1-4244-0201-4. ISSN 1051-0117. doi:10.1109/ULTSYM.2006.469
1994
Billson, Duncan R. (1994) Advanced non-contacting ultrasonic techniques for non-destructive testing. PhD thesis, University of Warwick.
This list was generated on Tue Dec 10 17:28:59 2019 GMT.