
The Library
Browse by Warwick Author
![]() | Up a level |
Number of items: 68.
2023
Neo, Edward Ren Kai, Low, Jonathan Sze Choong, Goodship, Vannessa and Debattista, Kurt (2023) Deep learning for chemometric analysis of plastic spectral data from infrared and Raman databases. Resources, Conservation and Recycling, 188 . 106718. doi:10.1016/j.resconrec.2022.106718
2022
Carter, Joseph L., Kelly, Catherine A., Marshall, Jean, Hammond, Vicki, Goodship, Vannessa and Jenkins, Mike J. (2022) PEDOT : PSS conductivity enhancement through addition of the surfactant Tween 80. Polymers, 14 (23). 5072. doi:10.3390/polym14235072
Marshall, Jean Elizabeth, Middleton, Bethany J., Gastol, Dominika E., Sommerville, Roberto, McElroy, Con Robert, Kendrick, Emma and Goodship, Vannessa (2022) Benign solvents for recycling and re-use of a multi-layer battery pouch. Materials Advances, 3 (12). pp. 4973-4981. doi:10.1039/D2MA00239F
Gastol, Dominika, Marshall, Jean, Cooper, Elizabeth, Mitchell, Claire, Burnett, David, Song, Tengfei, Sommerville, Roberto, Middleton, Bethany J., Crozier, Mickey, Smith, Robert, Haig, Sam, McElroy, Con Robert, van Dijk, Nick, Croft, Paul, Goodship, Vannessa and Kendrick, Emma (2022) Reclaimed and up‐cycled cathodes for lithium‐ion batteries. Global Challenges . 2200046. doi:10.1002/gch2.202200046 (In Press)
Neo, Edward Ren Kai, Yeo, Zhiquan, Low, Jonathan Sze Choong, Goodship, Vannessa and Debattista, Kurt (2022) A review on chemometric techniques with infrared, Raman and laser-induced breakdown spectroscopy for sorting plastic waste in the recycling industry. Resources, Conservation and Recycling, 180 . 106217. doi:10.1016/j.resconrec.2022.106217
Cherrington, Ruth, Marshall, Jean, Alexander, Allen T. and Goodship, Vannessa (2022) Exploring the circular economy through coatings in transport. Sustainable Production and Consumption, 32 . pp. 136-146. doi:10.1016/j.spc.2022.04.016
2021
Xu, X., Gao, F., Lopera Valle, K., Makenji, K., Nedolisa, C., Zhao, Y., Goodship, Vannessa and Mao, Ken (2021) Wear performance of commercial polyoxymethylene copolymer and homopolymer injection moulded gears. Tribology in Industry, 43 (4). pp. 561-573. doi:10.24874/ti.1039.01.21.04
James, Margot, Sen, Hopi and Goodship, Vannessa (2021) Growing digital economy and connectivity for a net zero age. In: Neilson, Beverly and McCabe, Steve, (eds.) Exploring the Green Economy: Issues, Challenges and Benefits. London: Bite Sized Books Ltd, pp. 93-103. ISBN 9798532032347
Goodship, Vannessa (2021) Recycling of elastomer and polymer matrix composites. In: Brabazon, Dermot, (ed.) Encyclopedia of Materials: Composites. Elsevier Inc., pp. 276-289. ISBN 9780128197318
Marshall, Jean, Zhenova, Anna, Roberts, Samuel, Petchey, Tabitha, Zhu, Pengcheng, Dancer, Claire E. J., McElroy, Con R., Kendrick, Emma and Goodship, Vannessa (2021) On the solubility and stability of polyvinylidene fluoride. Polymers, 13 (9). 1354. doi:10.3390/polym13091354
Zhu, Pengcheng, Gastol, Dominika E., Marshall, Jean, Sommerville, Roberto, Goodship, Vannessa and Kendrick, Emma (2021) A review of current collectors for lithium-ion batteries. Journal of Power Sources, 485 . 229321. doi:10.1016/j.jpowsour.2020.229321
Sommervill, Roberto, Zhu, Pengcheng, Ali Rajaeifar, Mohammad, Heidrich, Oliver, Goodship, Vannessa and Kendrick, Emma (2021) A qualitative assessment of lithium ion battery recycling processes. Resources, Conservation and Recycling, 165 . 105219. doi:10.1016/j.resconrec.2020.105219
2020
Sommerville, Roberto, Shaw-Stewart, James, Goodship, Vannessa, Rowson, Neil and Kendrick, Emma (2020) A review of physical processes used in the safe recycling of lithium ion batteries. Sustainable Materials and Technologies, 25 . e00197. doi:10.1016/j.susmat.2020.e00197
Marshall, Jean, Gastol, Dominika E., Sommerville, Roberto, Middleton, Bethany J., Goodship, Vannessa and Kendrick, Emma (2020) Disassembly of Li Ion cells—characterization and safety considerations of a recycling scheme. Metals, 10 (6). e773. doi:10.3390/met10060773
Goodship, Vannessa (2020) Injection moulding : a practical guide. Berlin ; New York: De Gruyter. ISBN 9783110653021
2019
Marshall, Jean, Fiamegkou, Eleni, Dabera, Dinesha, Gorman, Scott, Kendrick, Emma and Goodship, Vannessa (2019) Functional thin films in the manufacture of batteries. In: Formulating Functional Films and Coatings II, London, UK (Unpublished)
Mao, Ken, Ramakrishnan, Ramkumar, Greenwood, David G., Goodship, Vannessa, Shrouti, Chetan, Chetwynd, D. G. and Langlois, Paul (2019) The wear resistance improvement of fibre reinforced polymer composite gears. Wear, 426-427 (Part B). pp. 1033-1039. doi:10.1016/j.wear.2018.12.043
2018
Middleton, Bethany J., Couling, Kevin, Dallmann, Robert, Goodship, Vannessa and Charmet, Jérôme (2018) Low-cost injection moulding strategies for the fabrication of organ on a chip devices. In: BioMedEng18, London, 6-7 Sep 2018. Published in: BioMedEng18 p. 269. ISBN 9781999646509.
2017
Goodship, Vannessa, Middleton, Bethany J., Fiamegkou, Eleni and Cherrington, Ruth (2017) Building in multifunctionality in plastic components : complexity, cost and sustainability. In: 15th International Conference of Manufacturing Research, Greenwich, London, UK, 4-7 Sep 2017. Published in: Advances in Manufacturing Technology XXXI, 6 pp. 377-382. ISBN 9781614997917. doi:10.3233/978-1-61499-792-4-377
Goodship, Vannessa, ed. (2017) ARBURG practical guide to injection moulding. Shawbury UK: Smithers Rapra. ISBN 9781910242940
2016
Cherrington, Ruth, Wood, Benjamin M. and Goodship, Vannessa (2016) Digital printing of titanium dioxide for dye sensitized solar cells. Journal of Visualized Experiments (JoVE) (111). e53963. doi:10.3791/53963
Goodship, Vannessa (2016) Injection molding of thermoplastics. In: Goodship, Vannessa and Middleton, Bethany J. and Cherrington, Ruth, (eds.) Design and Manufacture of Plastic Components for Multifunctionality. Plastics design library handbook series . Oxford, UK: Elsevier, pp. 103-170. ISBN 9780323340618
Wood , B. M. (2016) Multifunctionality in additive manufacturing. In: Goodship, Vannessa and Middleton, Bethany J. and Cherrington, Ruth, (eds.) Design and Manufacture of Plastic Components for Multifunctionality : Structural Composites, Injection Molding, and 3D Printing. PDL handbook series . Kidlington, Oxford, UK ; Waltham, MA: Elsevier, pp. 171-204. ISBN 9780323353847
2015
Goodship, Vannessa, Middleton, Bethany J. and Cherrington, Ruth (2015) Design and manufacture of plastic components for multifunctionality structural composites, injection molding, and 3D printing. PDL handbook series . Kidlington, Oxford, UK ; Waltham, MA: William Andrew is an imprint of Elsevier. ISBN 9780323353847
Cherrington, Ruth, Hughes, Darren J., Senthilarasu, S. and Goodship, Vannessa (2015) Inkjet-printed TiO2 nanoparticles from aqueous solutions for dye-sensitized solar cells (DSSCs). Energy Technology, 3 (8). pp. 866-870. doi:10.1002/ente.201500096
2014
University of Warwick (2014) Multilayer manufacturing method utilising mould. World International Property Organization no.WO2014/091197 A1 [Online]..
Goodship, Vannessa, Brzeski, Ian, Wood, B. M., Cherrington, Ruth, Makenji, K. , Reynolds, Neil and Gibbons, G. J. (2014) Gas-assisted compression moulding of recycled GMT : effect of gas injection parameters. Journal of Materials Processing Technology, Volume 214 (Number 3). pp. 515-523. doi:10.1016/j.jmatprotec.2013.10.013
2013
Cherrington, Ruth, Goodship, Vannessa, Longfield, A. and Kirwan, Kerry (2013) The feed-in tariff in the UK : a case study focus on domestic photovoltaic systems. Renewable Energy, Vol.50 . pp. 421-426. doi:10.1016/j.renene.2012.06.055
2012
Middleton, Bethany J. and Goodship, Vannessa (2012) Injection molding electroluminescent components. Polymer Engineering & Science, Volume 53 (Number 7). pp. 1554-1562. doi:10.1002/pen.23399
Cherrington, Ruth, Goodship, Vannessa, Meredith, James O., Wood, Benjamin M., Coles, Stuart R., Vuillaume, A., Feito-Boirac, A., Spee, F. and Kirwan, Kerry (2012) Producer responsibility : defining the incentive for recycling composite wind turbine blades in Europe. Energy Policy, Vol.47 . pp. 13-21. doi:10.1016/j.enpol.2012.03.076
Goodship, Vannessa (2012) Recycling issues in polymer matrix composites. In: Robinson, P. and Greenhalgh, E. and Pinho, S., (eds.) Failure mechanisms in polymer matrix composites: Criteria, testing and industrial applications. Cambridge, U.K.: Woodhead Publishing Ltd., pp. 336-366. ISBN 9781845697501
Goodship, Vannessa and Stevels, Ab (2012) Waste electrical and electronic equipment (WEEE) handbook. Woodhead Publishing series in electronic and optical materials (Number 30). Cambridge: Woodhead Publishing Ltd.. ISBN 9780857090898
2010
Goodship, Vannessa (2010) The instant expert: plastics, processing and properties. Bristol, U.K.: Plastics Information Direct. ISBN 9781906479053
Malcenji, K., Goodship, Vannessa, Christmas, P., Smith, G. F. and Pearce, B. (2010) A mixed plastic waste and de-inked residue composite from recycled paper waste products. Progress in Rubber Plastics and Recycling Technology, Vol.26 (No.2). pp. 93-106.
2009
Papadakis, N., Ramirez, C. and Reynolds, Neil (2009) Designing composite wind turbine blades for disposal, recycling or reuse. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 443-457. ISBN 9781845694623
Goodship, Vannessa (2009) Management, recycling and reuse of waste composites. Woodhead Publishing in materials . Cambridge, U.K. ; Boca Raton, FL, U.S.A.: Woodhead Publishing Ltd. ; CRC Press. ISBN 9781845694623
Reynolds, Neil and Pharaoh, Mark W. (2009) An introduction to composites recycling. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 3-19. ISBN 9781845694623
Goodship, Vannessa and Jacobs, D. K. (2009) Polyvinyl alcohol: materials, processing and applications. Rapra review reports, Vol.16 (No.12). Shrewsbury, Shropshire: Smithers Rapra Technology. ISBN 9781847350954
Smith, G. F., Goodship, Vannessa, Pearce, B. J. P. and Makenji, Kylash (2009) In mould process for electro active injection moulded components. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09)
2008
Guild, F. J., Green, M. D., Stewart, R. and Goodship, Vannessa (2008) Air-plasma pre-treatment for polypropylene automotive bumpers. Journal of Adhesion, Volume 84 (Number 6). pp. 530-542. doi:10.1080/00218460802161574
Smith, G. F., Goodship, Vannessa, Ogur, E. O. and Stidworthy, P. (2008) Smart 'in mould' manipulation of materials. Plastics, Rubber and Composites, Vol.37 (No.2-4). pp. 88-95. doi:10.1179/174328908X283366
Ogur, E. O., Davis, M. C., Goodship, Vannessa and Smith, G. F. (2008) Effect of magnetic field on the distribution and orientation of magnetic particles in co-injection moulding. Progress in Rubber Plastics and Recycling Technology, Vol.24 (No.4). pp. 227-237.
Goodship, Vannessa and Smith, G. F. (2008) Removing the paint shop process : options for painting and decorating injection mouldings. International Journal of Environmental Technology and Management, Vol.8 (No.4). pp. 339-347. doi:10.1504/IJETM.2008.017506
2007
Goodship, Vannessa (2007) Plastic recycling. Science Progress, Volume 90 (Number 4). pp. 245-268. doi:10.3184/003685007X228748
Goodship, Vannessa, Cook, N., Dargue, I., Lobjoit, C., Makenji, Kylash and Smith, G. F. (2007) In mould painting using thermoset powder coating and thermoplastic substrate in closed tool injection moulding. Plastics, Rubber and Composites, Vol.36 (No.1). pp. 34-41. doi:10.1179/174328907X171217
Makenji, K., Goodship, Vannessa, Fanning, R. and Buckley, S. (2007) Analysis of back injecting real wood veneers using engineering polymers in an injection moulding process. Progress in Rubber, Plastics and Recycling Technology, Volume 23 (Number 2). pp. 83-95.
Goodship, Vannessa (2007) Introduction to plastics recycling. Shawbury, UK: Smithers Rapra. ISBN 9781847350787
2006
Goodship, Vannessa, Lobjoit, C., Cook, N. and Smith, G. F. (2006) In-mould painting by spraying thermoset powder coating into a closed mould, followed by standard thermoplastic injection moulding : part 1 : introducing the in-spire process. Progress in Rubber, Plastics and Recycling Technology, Volume 22 (Number 3). pp. 165-177.
Makenji, K., Goodship, Vannessa, Buckley, S. and Evered, C. (2006) A new in-mould decoration process using real wood veneer. Progress in Rubber, Plastics and Recycling Technology, Volume 22 (Number 4). pp. 225-242.
2005
Stewart, Rebecca, Goodship, Vannessa, Guild, Felicity, Green, Martin and Farrow, Jeff (2005) Investigation and demonstration of the durability of air plasma pre-treatment on polypropylene automotive bumpers. International Journal of Adhesion and Adhesives, Volume 25 (Number 2). pp. 93-99. doi:10.1016/j.ijadhadh.2004.04.001
2004
Goodship, Vannessa and Pharaoh, M. W. (2004) An information breakdown and discussion of opportunities from the WEEE directive. International Journal of Manufacturing Technology and Management, Volume 6 (Number 1-2). pp. 1-8. doi:10.1504/IJMTM.2004.004509
Goodship, Vannessa, Stewart, R. L., Hansell, R., Ogur, E. O. and Smith, G. F. (2004) Microcellular foaming with supercritical CO2 in injection moulding. Cellular Polymers, Volume 23 (Number 1). pp. 25-37.
Goodship, Vannessa and Ogur, E. O. (2004) Polymer processing with supercritical fluids. Rapra review reports, Volume 15 (Number 8). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859574942
Goodship, Vannessa (2004) Practical guide to injection moulding. Shawbury, UK: Rapra Technology. ISBN 9781859574447
Kiatmanaroj, Subongkoj, Goodship, Vannessa and Smith, G. F. (2004) Sandwich injection moulding of thermosetting materials. II. Effects of moulding parameters. Progress in Rubber, Plastics and Recycling Technology, Volume 21 (Number 1). pp. 27-38.
Kiatmanaroj, Subongkoj, Goodship, Vannessa and Smith, G. F. (2004) Sandwich injection moulding of thermosetting materials. Part I : initial experiments. Progress in Rubber, Plastics and Recycling Technology, Volume 20 (Number 3). pp. 171-185.
Goodship, Vannessa (2004) Troubleshooting injection moulding : an Arburg guide. Rapra review reports, Volume 15 (Number 4). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859574706
2003
Goodship, Vannessa, Kirwan, Kerry, Goodhead, T. C. and Smith, Gordon (2003) Interfacial instabilities in multimaterial co-injection mouldings - Part 2 - Interfacial mixing in transparent mouldings. Plastics, Rubber and Composites, Vol.32 (No.3). pp. 98-103. doi:10.1179/146580103225001345
Goodship, Vannessa, Cain, R. L., Reynolds, Neil and Pharaoh, Mark W. (2003) The WEEE Directive : information and opportunities for plastics recycling. Progress in Rubber, Plastics and Recycling Technology, Volume 18 (Number 3). pp. 161-172.
2002
Love, J. C. and Goodship, Vannessa (2002) In-mould decoration of plastics. Rapra review reports, Volume 13 (Number 2). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859573280
Goodship, Vannessa and Love, J. C. (2002) Multi-material injection moulding. Rapra review reports, Volume 13 (Number 1). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859573273
Goodship, Vannessa (2002) What to do with plastics at end-of-life. In: Tucker, Nick and Lindsey, Kevin, (eds.) An introduction to automotive composites. Shrewsbury: RAPRA Technology. ISBN 1859572790
2001
Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.
Goodship, Vannessa and Kirwan, Kerry (2001) Interfacial instabilities in multimaterial co-injection mouldings - Part 1 - Background and initial experiments. Plastics, Rubber and Composites, Vol.30 (No.1). pp. 11-15. doi:10.1179/146580101101541372
Goodship, Vannessa (2001) Introduction to plastic recycling. Shawbury, UK: Rapra Technology Ltd. ISBN 1859572936
2000
Goodship, Vannessa, Hulme, A. J. and Smith, G. F. (2000) Improving processing and material characteristics of contaminated end-of-life polypropylene by compatibilisation. Polymer Recycling, Volume 5 (Number 4). pp. 205-212.
Wimpenny, D. I., Hayes, J. and Goodship, Vannessa (2000) Rapid manufacturing - is it feasible? CAD - CAM & Computer Graphics, Volume 15 (Number 2/3/4). pp. 281-293.
Cain, R. L., Goodship, Vannessa, Love, J. C., Smith, G. F. and Tucker, N. (2000) Recycling of automotive shredder residue by co-injection moulding. Polymer Recycling, Volume 5 (Number 2). pp. 63-70.
This list was generated on Sat Jan 28 02:25:23 2023 GMT.