Journal Article

Gülçür, Mert, Wilson, Paul, Donnelly, Michael, Couling, Kevin, Goodship, Vannessa, Charmet, Jérôme, Williams, Mark A. and Gibbons, Gregory John (2023) X-ray computed tomography for predictive quality assessment, 3D visualisation of micro-injection mouldings and soft-tool deformation. Materials & Design, 227 . 111741. doi:10.1016/j.matdes.2023.111741 ISSN 0264-1275.

Neo, Edward Ren Kai, Low, Jonathan Sze Choong, Goodship, Vannessa and Debattista, Kurt (2023) Deep learning for chemometric analysis of plastic spectral data from infrared and Raman databases. Resources, Conservation and Recycling, 188 . 106718. doi:10.1016/j.resconrec.2022.106718 ISSN 0921-3449.

Gastol, Dominika, Marshall, Jean, Cooper, Elizabeth, Mitchell, Claire, Burnett, David, Song, Tengfei, Sommerville, Roberto, Middleton, Bethany J., Crozier, Mickey, Smith, Robert, Haig, Sam, McElroy, Con Robert, van Dijk, Nick, Croft, Paul, Goodship, Vannessa and Kendrick, Emma (2022) Reclaimed and up‐cycled cathodes for lithium‐ion batteries. Global Challenges, 6 (12). 2200046. doi:10.1002/gch2.202200046 ISSN 2056-6646.

Carter, Joseph L., Kelly, Catherine A., Marshall, Jean, Hammond, Vicki, Goodship, Vannessa and Jenkins, Mike J. (2022) PEDOT : PSS conductivity enhancement through addition of the surfactant Tween 80. Polymers, 14 (23). 5072. doi:10.3390/polym14235072 ISSN 2073-4360.

Marshall, Jean Elizabeth, Middleton, Bethany J., Gastol, Dominika E., Sommerville, Roberto, McElroy, Con Robert, Kendrick, Emma and Goodship, Vannessa (2022) Benign solvents for recycling and re-use of a multi-layer battery pouch. Materials Advances, 3 (12). pp. 4973-4981. doi:10.1039/D2MA00239F ISSN 2633-5409.

Neo, Edward Ren Kai, Yeo, Zhiquan, Low, Jonathan Sze Choong, Goodship, Vannessa and Debattista, Kurt (2022) A review on chemometric techniques with infrared, Raman and laser-induced breakdown spectroscopy for sorting plastic waste in the recycling industry. Resources, Conservation and Recycling, 180 . 106217. doi:10.1016/j.resconrec.2022.106217 ISSN 0921-3449.

Cherrington, Ruth, Marshall, Jean, Alexander, Allen T. and Goodship, Vannessa (2022) Exploring the circular economy through coatings in transport. Sustainable Production and Consumption, 32 . pp. 136-146. doi:10.1016/j.spc.2022.04.016 ISSN 2352-5509.

Xu, X., Gao, F., Lopera Valle, K., Makenji, K., Nedolisa, C., Zhao, Y., Goodship, Vannessa and Mao, Ken (2021) Wear performance of commercial polyoxymethylene copolymer and homopolymer injection moulded gears. Tribology in Industry, 43 (4). pp. 561-573. doi:10.24874/ti.1039.01.21.04 ISSN 0354-8996.

Marshall, Jean, Zhenova, Anna, Roberts, Samuel, Petchey, Tabitha, Zhu, Pengcheng, Dancer, Claire E. J., McElroy, Con R., Kendrick, Emma and Goodship, Vannessa (2021) On the solubility and stability of polyvinylidene fluoride. Polymers, 13 (9). 1354. doi:10.3390/polym13091354 ISSN 2073-4360.

Zhu, Pengcheng, Gastol, Dominika E., Marshall, Jean, Sommerville, Roberto, Goodship, Vannessa and Kendrick, Emma (2021) A review of current collectors for lithium-ion batteries. Journal of Power Sources, 485 . 229321. doi:10.1016/j.jpowsour.2020.229321 ISSN 0378-7753.

Sommervill, Roberto, Zhu, Pengcheng, Ali Rajaeifar, Mohammad, Heidrich, Oliver, Goodship, Vannessa and Kendrick, Emma (2021) A qualitative assessment of lithium ion battery recycling processes. Resources, Conservation and Recycling, 165 . 105219. doi:10.1016/j.resconrec.2020.105219 ISSN 0921-3449.

Sommerville, Roberto, Shaw-Stewart, James, Goodship, Vannessa, Rowson, Neil and Kendrick, Emma (2020) A review of physical processes used in the safe recycling of lithium ion batteries. Sustainable Materials and Technologies, 25 . e00197. doi:10.1016/j.susmat.2020.e00197 ISSN 22149937.

Marshall, Jean, Gastol, Dominika E., Sommerville, Roberto, Middleton, Bethany J., Goodship, Vannessa and Kendrick, Emma (2020) Disassembly of Li Ion cells—characterization and safety considerations of a recycling scheme. Metals, 10 (6). e773. doi:10.3390/met10060773 ISSN 2075-4701.

Mao, Ken, Ramakrishnan, Ramkumar, Greenwood, David G., Goodship, Vannessa, Shrouti, Chetan, Chetwynd, D. G. and Langlois, Paul (2019) The wear resistance improvement of fibre reinforced polymer composite gears. Wear, 426-427 (Part B). pp. 1033-1039. doi:10.1016/j.wear.2018.12.043 ISSN 0043-1648.

Cherrington, Ruth, Wood, Benjamin M. and Goodship, Vannessa (2016) Digital printing of titanium dioxide for dye sensitized solar cells. Journal of Visualized Experiments (JoVE) (111). e53963. doi:10.3791/53963 ISSN 1940-087X.

Cherrington, Ruth, Hughes, Darren J., Senthilarasu, S. and Goodship, Vannessa (2015) Inkjet-printed TiO2 nanoparticles from aqueous solutions for dye-sensitized solar cells (DSSCs). Energy Technology, 3 (8). pp. 866-870. doi:10.1002/ente.201500096 ISSN 2194-4288.

Goodship, Vannessa, Brzeski, Ian, Wood, B. M., Cherrington, Ruth, Makenji, K. , Reynolds, Neil and Gibbons, G. J. (2014) Gas-assisted compression moulding of recycled GMT : effect of gas injection parameters. Journal of Materials Processing Technology, Volume 214 (Number 3). pp. 515-523. doi:10.1016/j.jmatprotec.2013.10.013 ISSN 0924-0136.

Cherrington, Ruth, Goodship, Vannessa, Longfield, A. and Kirwan, Kerry (2013) The feed-in tariff in the UK : a case study focus on domestic photovoltaic systems. Renewable Energy, Vol.50 . pp. 421-426. doi:10.1016/j.renene.2012.06.055 ISSN 0960-1481.

Middleton, Bethany J. and Goodship, Vannessa (2012) Injection molding electroluminescent components. Polymer Engineering & Science, Volume 53 (Number 7). pp. 1554-1562. doi:10.1002/pen.23399 ISSN 0032-3888.

Cherrington, Ruth, Goodship, Vannessa, Meredith, James O., Wood, Benjamin M., Coles, Stuart R., Vuillaume, A., Feito-Boirac, A., Spee, F. and Kirwan, Kerry (2012) Producer responsibility : defining the incentive for recycling composite wind turbine blades in Europe. Energy Policy, Vol.47 . pp. 13-21. doi:10.1016/j.enpol.2012.03.076 ISSN 0301-4215.

Malcenji, K., Goodship, Vannessa, Christmas, P., Smith, G. F. and Pearce, B. (2010) A mixed plastic waste and de-inked residue composite from recycled paper waste products. Progress in Rubber Plastics and Recycling Technology, Vol.26 (No.2). pp. 93-106. ISSN 1477-7606.

Guild, F. J., Green, M. D., Stewart, R. and Goodship, Vannessa (2008) Air-plasma pre-treatment for polypropylene automotive bumpers. Journal of Adhesion, Volume 84 (Number 6). pp. 530-542. doi:10.1080/00218460802161574 ISSN 0021-8464.

Smith, G. F., Goodship, Vannessa, Ogur, E. O. and Stidworthy, P. (2008) Smart 'in mould' manipulation of materials. Plastics, Rubber and Composites, Vol.37 (No.2-4). pp. 88-95. doi:10.1179/174328908X283366 ISSN 1465-8011.

Ogur, E. O., Davis, M. C., Goodship, Vannessa and Smith, G. F. (2008) Effect of magnetic field on the distribution and orientation of magnetic particles in co-injection moulding. Progress in Rubber Plastics and Recycling Technology, Vol.24 (No.4). pp. 227-237. ISSN 1477-7606.

Goodship, Vannessa and Smith, G. F. (2008) Removing the paint shop process : options for painting and decorating injection mouldings. International Journal of Environmental Technology and Management, Vol.8 (No.4). pp. 339-347. doi:10.1504/IJETM.2008.017506 ISSN 1466-2132.

Goodship, Vannessa (2007) Plastic recycling. Science Progress, Volume 90 (Number 4). pp. 245-268. doi:10.3184/003685007X228748 ISSN 0036-8504.

Goodship, Vannessa, Cook, N., Dargue, I., Lobjoit, C., Makenji, Kylash and Smith, G. F. (2007) In mould painting using thermoset powder coating and thermoplastic substrate in closed tool injection moulding. Plastics, Rubber and Composites, Vol.36 (No.1). pp. 34-41. doi:10.1179/174328907X171217 ISSN 1465-8011.

Makenji, K., Goodship, Vannessa, Fanning, R. and Buckley, S. (2007) Analysis of back injecting real wood veneers using engineering polymers in an injection moulding process. Progress in Rubber, Plastics and Recycling Technology, Volume 23 (Number 2). pp. 83-95. ISSN 1477-7606.

Goodship, Vannessa, Lobjoit, C., Cook, N. and Smith, G. F. (2006) In-mould painting by spraying thermoset powder coating into a closed mould, followed by standard thermoplastic injection moulding : part 1 : introducing the in-spire process. Progress in Rubber, Plastics and Recycling Technology, Volume 22 (Number 3). pp. 165-177. ISSN 1477-7606.

Makenji, K., Goodship, Vannessa, Buckley, S. and Evered, C. (2006) A new in-mould decoration process using real wood veneer. Progress in Rubber, Plastics and Recycling Technology, Volume 22 (Number 4). pp. 225-242. ISSN 1477-7606.

Stewart, Rebecca, Goodship, Vannessa, Guild, Felicity, Green, Martin and Farrow, Jeff (2005) Investigation and demonstration of the durability of air plasma pre-treatment on polypropylene automotive bumpers. International Journal of Adhesion and Adhesives, Volume 25 (Number 2). pp. 93-99. doi:10.1016/j.ijadhadh.2004.04.001 ISSN 0143-7496.

Goodship, Vannessa and Pharaoh, M. W. (2004) An information breakdown and discussion of opportunities from the WEEE directive. International Journal of Manufacturing Technology and Management, Volume 6 (Number 1-2). pp. 1-8. doi:10.1504/IJMTM.2004.004509 ISSN 1368-2148.

Goodship, Vannessa, Stewart, R. L., Hansell, R., Ogur, E. O. and Smith, G. F. (2004) Microcellular foaming with supercritical CO2 in injection moulding. Cellular Polymers, Volume 23 (Number 1). pp. 25-37. ISSN 0262-4893.

Kiatmanaroj, Subongkoj, Goodship, Vannessa and Smith, G. F. (2004) Sandwich injection moulding of thermosetting materials. II. Effects of moulding parameters. Progress in Rubber, Plastics and Recycling Technology, Volume 21 (Number 1). pp. 27-38. ISSN 1477-7606.

Kiatmanaroj, Subongkoj, Goodship, Vannessa and Smith, G. F. (2004) Sandwich injection moulding of thermosetting materials. Part I : initial experiments. Progress in Rubber, Plastics and Recycling Technology, Volume 20 (Number 3). pp. 171-185. ISSN 1477-7606.

Goodship, Vannessa, Kirwan, Kerry, Goodhead, T. C. and Smith, Gordon (2003) Interfacial instabilities in multimaterial co-injection mouldings - Part 2 - Interfacial mixing in transparent mouldings. Plastics, Rubber and Composites, Vol.32 (No.3). pp. 98-103. doi:10.1179/146580103225001345 ISSN 1465-8011.

Goodship, Vannessa, Cain, R. L., Reynolds, Neil and Pharaoh, Mark W. (2003) The WEEE Directive : information and opportunities for plastics recycling. Progress in Rubber, Plastics and Recycling Technology, Volume 18 (Number 3). pp. 161-172. ISSN 1477-7606.

Goodship, Vannessa and Kirwan, Kerry (2001) Interfacial instabilities in multimaterial co-injection mouldings - Part 1 - Background and initial experiments. Plastics, Rubber and Composites, Vol.30 (No.1). pp. 11-15. doi:10.1179/146580101101541372 ISSN 1465-8011.

Goodship, Vannessa, Hulme, A. J. and Smith, G. F. (2000) Improving processing and material characteristics of contaminated end-of-life polypropylene by compatibilisation. Polymer Recycling, Volume 5 (Number 4). pp. 205-212. ISSN 0969-5990.

Wimpenny, D. I., Hayes, J. and Goodship, Vannessa (2000) Rapid manufacturing - is it feasible? CAD - CAM & Computer Graphics, Volume 15 (Number 2/3/4). pp. 281-293. ISSN 1106-0077.

Cain, R. L., Goodship, Vannessa, Love, J. C., Smith, G. F. and Tucker, N. (2000) Recycling of automotive shredder residue by co-injection moulding. Polymer Recycling, Volume 5 (Number 2). pp. 63-70. ISSN 0969-5990.

Book Item

James, Margot, Sen, Hopi and Goodship, Vannessa (2021) Growing digital economy and connectivity for a net zero age. In: Neilson, Beverly and McCabe, Steve, (eds.) Exploring the Green Economy: Issues, Challenges and Benefits. London: Bite Sized Books Ltd, pp. 93-103. ISBN 9798532032347

Goodship, Vannessa (2021) Recycling of elastomer and polymer matrix composites. In: Brabazon, Dermot, (ed.) Encyclopedia of Materials: Composites. Elsevier Inc., pp. 276-289. ISBN 9780128197318

Goodship, Vannessa (2016) Injection molding of thermoplastics. In: Goodship, Vannessa and Middleton, Bethany J. and Cherrington, Ruth, (eds.) Design and Manufacture of Plastic Components for Multifunctionality. Plastics design library handbook series . Oxford, UK: Elsevier, pp. 103-170. ISBN 9780323340618

Wood , B. M. (2016) Multifunctionality in additive manufacturing. In: Goodship, Vannessa and Middleton, Bethany J. and Cherrington, Ruth, (eds.) Design and Manufacture of Plastic Components for Multifunctionality : Structural Composites, Injection Molding, and 3D Printing. PDL handbook series . Kidlington, Oxford, UK ; Waltham, MA: Elsevier, pp. 171-204. ISBN 9780323353847

Goodship, Vannessa (2012) Recycling issues in polymer matrix composites. In: Robinson, P. and Greenhalgh, E. and Pinho, S., (eds.) Failure mechanisms in polymer matrix composites: Criteria, testing and industrial applications. Cambridge, U.K.: Woodhead Publishing Ltd., pp. 336-366. ISBN 9781845697501

Papadakis, N., Ramirez, C. and Reynolds, Neil (2009) Designing composite wind turbine blades for disposal, recycling or reuse. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 443-457. ISBN 9781845694623

Reynolds, Neil and Pharaoh, Mark W. (2009) An introduction to composites recycling. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 3-19. ISBN 9781845694623

Goodship, Vannessa (2002) What to do with plastics at end-of-life. In: Tucker, Nick and Lindsey, Kevin, (eds.) An introduction to automotive composites. Shrewsbury: RAPRA Technology. ISBN 1859572790

Conference Item

Marshall, Jean, Fiamegkou, Eleni, Dabera, Dinesha, Gorman, Scott, Kendrick, Emma and Goodship, Vannessa (2019) Functional thin films in the manufacture of batteries. In: Formulating Functional Films and Coatings II, London, UK (Unpublished)

Middleton, Bethany J., Couling, Kevin, Dallmann, Robert, Goodship, Vannessa and Charmet, Jérôme (2018) Low-cost injection moulding strategies for the fabrication of organ on a chip devices. In: BioMedEng18, London, 6-7 Sep 2018. Published in: BioMedEng18 p. 269. ISBN 9781999646509.

Goodship, Vannessa, Middleton, Bethany J., Fiamegkou, Eleni and Cherrington, Ruth (2017) Building in multifunctionality in plastic components : complexity, cost and sustainability. In: 15th International Conference of Manufacturing Research, Greenwich, London, UK, 4-7 Sep 2017. Published in: Advances in Manufacturing Technology XXXI, 6 pp. 377-382. ISBN 9781614997917. doi:10.3233/978-1-61499-792-4-377

Smith, G. F., Goodship, Vannessa, Pearce, B. J. P. and Makenji, Kylash (2009) In mould process for electro active injection moulded components. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09)

Book

Goodship, Vannessa (2020) Injection moulding : a practical guide. Berlin ; New York: De Gruyter. ISBN 9783110653021

Goodship, Vannessa, ed. (2017) ARBURG practical guide to injection moulding. Shawbury UK: Smithers Rapra. ISBN 9781910242940

Goodship, Vannessa, Middleton, Bethany J. and Cherrington, Ruth (2015) Design and manufacture of plastic components for multifunctionality structural composites, injection molding, and 3D printing. PDL handbook series . Kidlington, Oxford, UK ; Waltham, MA: William Andrew is an imprint of Elsevier. ISBN 9780323353847

Goodship, Vannessa and Stevels, Ab (2012) Waste electrical and electronic equipment (WEEE) handbook. Woodhead Publishing series in electronic and optical materials (Number 30). Cambridge: Woodhead Publishing Ltd.. ISBN 9780857090898

Goodship, Vannessa (2010) The instant expert: plastics, processing and properties. Bristol, U.K.: Plastics Information Direct. ISBN 9781906479053

Goodship, Vannessa (2009) Management, recycling and reuse of waste composites. Woodhead Publishing in materials . Cambridge, U.K. ; Boca Raton, FL, U.S.A.: Woodhead Publishing Ltd. ; CRC Press. ISBN 9781845694623

Goodship, Vannessa and Jacobs, D. K. (2009) Polyvinyl alcohol: materials, processing and applications. Rapra review reports, Vol.16 (No.12). Shrewsbury, Shropshire: Smithers Rapra Technology. ISBN 9781847350954

Goodship, Vannessa (2007) Introduction to plastics recycling. Shawbury, UK: Smithers Rapra. ISBN 9781847350787

Goodship, Vannessa and Ogur, E. O. (2004) Polymer processing with supercritical fluids. Rapra review reports, Volume 15 (Number 8). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859574942

Goodship, Vannessa (2004) Practical guide to injection moulding. Shawbury, UK: Rapra Technology. ISBN 9781859574447

Goodship, Vannessa (2004) Troubleshooting injection moulding : an Arburg guide. Rapra review reports, Volume 15 (Number 4). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859574706

Love, J. C. and Goodship, Vannessa (2002) In-mould decoration of plastics. Rapra review reports, Volume 13 (Number 2). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859573280

Goodship, Vannessa and Love, J. C. (2002) Multi-material injection moulding. Rapra review reports, Volume 13 (Number 1). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859573273

Goodship, Vannessa (2001) Introduction to plastic recycling. Shawbury, UK: Rapra Technology Ltd. ISBN 1859572936

Thesis

Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.

Patent

University of Warwick (2014) Multilayer manufacturing method utilising mould. World International Property Organization no.WO2014/091197 A1 [Online]..