B

Bruen, Thomas, Hooper, James Michael, Marco, James, Gama, Miguel and Chouchelamane, Gael (2016) Analysis of a battery management system (BMS) control strategy for vibration aged nickel manganese cobalt oxide (NMC) Lithium-Ion 18650 battery cells. Energies, 9 (4). pp. 1-20. doi:10.3390/en9040255 ISSN 1996-1073.

Barai, Anup, Widanage, Widanalage Dhammika, Marco, James, McGordon, Andrew and Jennings, P. A. (Paul A.) (2015) A study of the open circuit voltage characterization technique and hysteresis assessment of lithium-ion cells. Journal of Power Sources, Volume 295 . pp. 99-107. doi:10.1016/j.jpowsour.2015.06.140 ISSN 0378-7753.

Bruen, Thomas, Marco, James and Gama, Miguel (2015) Model based design of balancing systems for electric vehicle battery packs. In: IFAC Workshop on Engine and Powertrain Control, Simulation and Modelling, Ohio, USA, 23-26 Aug 2015 pp. 1-8. doi:10.1016/j.ifacol.2015.10.057 (Submitted)

H

Hooper, James Michael and Marco, James (2015) Experimental modal analysis of lithium-ion pouch cells. Journal of Power Sources, Volume 286 . pp. 247-259. doi:10.1016/j.jpowsour.2015.03.098 ISSN 0378-7753.

Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, Mike (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. doi:10.1016/j.jmatprotec.2010.02.019 ISSN 0924-0136.

Han, Li, Thornton, Martin and Shergold, Mike (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. doi:10.1016/j.matdes.2009.08.031 ISSN 0264-1275.

J

Jasinski, Dominik, Meredith, James O. and Kirwan, Kerry (2016) A comprehensive framework for automotive sustainability assessment. Journal of Cleaner Production, 135 . pp. 1034-1044. doi:10.1016/j.jclepro.2016.07.027 ISSN 0959-6526.

Jasinski, Dominik, Meredith, James O. and Kirwan, Kerry (2015) A comprehensive review of full cost accounting methods and their applicability to the automotive industry. Journal of cleaner production, 108 (Part A). pp. 1123-1139. doi:10.1016/j.jclepro.2015.06.040 ISSN 0959-6526.

L

Li, Dezhi, Chrysanthou, Andreas, Patel, Imran and Williams, Geraint J. (2016) Self-piercing riveting - a review. Working Paper. Coventry: University of Warwick WMG. (Unpublished)

M

Melnicuk, Vadim, Birrell, Stewart A., Crundall, Elizabeth and Jennings, P. A (2016) Towards hybrid driver state monitoring : review, future perspectives and the role of consumer electronics. In: IEEE Intelligent Vehicle Symposium (IV), Gothenburg, Sweden, 19-22 Jun 2016. Published in: 2016 IEEE Intelligent Vehicles Symposium (IV) 1392 -1397.

S

Somerville, Limhi, Bareño, J., Jennings, P. A. (Paul A.), McGordon, Andrew, Lyness, Christopher and Bloom, I. (2016) The effect of pre-analysis washing on the surface film of graphite electrodes. Electrochimica Acta, 206 . pp. 70-76. doi:10.1016/j.electacta.2016.04.133 ISSN 0013-4686.

T

Tripathy, Yashraj, McGordon, Andrew, Low, John C. T. and Marco, James (2016) Low temperature performance of Lithium-ion batteries for different drive cycles. In: Electric Vehicle Symposium (EVS 29), Montréal, Québec, 19-21 Jun 2016 pp. 1-12.

Taylor, James, Ball, Robert, McGordon, Andrew, Uddin, Kotub and Marco, James (2015) Sizing tool for rapid optimisation of pack configuration at early-stage automotive product development. In: Electric Vehicle Symposium 28 (EVS28), Goyang, Korea, 3-6 May 2015

Tripathy, Yashraj, Marco, James, McGordon, Andrew and Gama-Valdez , Miguel (2014) State-of-charge estimation algorithms and their implications on cells in parallel. In: IEEE International Electric Vehicle Conference 2014, Florence, Italy, 17–19 Dec 2014. Published in: 2014 IEEE International Electric Vehicle Conference (IEVC) ISBN 9781479960750. doi:10.1109/IEVC.2014.7056168

U

Uddin, Kotub , Moore, Andrew D. , Barai, Anup and Marco, James (2016) The effects of high frequency current ripple on electric vehicle battery performance. Applied Energy, 178 . pp. 142-154. doi:10.1016/j.apenergy.2016.06.033 ISSN 0306-2619.