Journal Article

Abbas, Syeda S. and McNally, Tony (2021) Composites of cysteamine functionalised graphene oxide and polypropylene. International Polymer Processing, 36 (3). doi:10.1515/ipp-2020-4079 (In Press)

Adegoke, E. I., Kampert, Erik and Higgins, Matthew D. (2021) Channel modelling and over-the-air signal quality at 3.5 GHz for 5G New Radio. IEEE Access . doi:10.1109/ACCESS.2021.3051487 (In Press)

Ahmadi-Assalemi, Gabriela, al-Khateeb, Haider M., Maple, Carsten, Epiphaniou, Gregory, Hammoudeh, Mohammad, Jahankhani, Hamid and Pillai, Prashant (2021) Optimising driver profiling through behaviour modelling of in-car sensor and global positioning system data. Computers and Electrical Engineering, 91 . 107047. doi:10.1016/j.compeleceng.2021.107047

Al-Nabulsi, Z., Mottram, J. Toby, Gillie, Martin, Kourra, Nadia and Williams, M. A. (2021) Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications. Construction and Building Materials, 274 . 121700. doi:10.1016/j.conbuildmat.2020.121700

Allcoat, Devon, Hatchard, Tim, Azmat, Freeha, Stansfield, Kim, Watson, Derrick G. and von Mühlenen, Adrian (2021) Education in the digital age : learning experience in virtual and mixed realities. Journal of Educational Computing Research . doi:10.1177/0735633120985120 (In Press)

Alsop, K., Baier, Waltraud, Norman, D. G., Burnett, B. and Williams, M. A. (2021) Accurate prediction of saw blade thicknesses from false start measurements. Forensic Science International, 318 . 110602. doi:10.1016/j.forsciint.2020.110602

Asante, Mary, Epiphaniou, Gregory, Maple, Carsten, Al-Khateeb, Haider, Bottarelli, Mirko and Zrar Ghafoor, Kayhan (2021) Distributed ledger technologies in supply chain security management : a comprehensive survey. IEEE Transactions on Engineering Management . (In Press)

Atay, Atakan, Topuz, Alper, Sarıarslana, Busra, Yıldırım, Ender, Charmet, Jérôme, Couling, Kevin and Cetin, Barbaros (2021) Flow rate controlled pipetting for microfluidics : second generation flexible hydraulic reservoir (FHRv2). Microfluidics and Nanofluidics, 25 . 3. doi:10.1007/s10404-020-02402-x

Baier, Waltraud, Norman, Danielle and Williams, Mark A. (2021) Micro-CT for the examination of paediatric rib injuries : a case series. Forensic Science International . 110789. doi:10.1016/j.forsciint.2021.110789

Basturk, S. Bahar, Dancer, Claire E. J. and McNally, Tony (2021) Dielectric performance of composites of BaTiO 3 and polymers for capacitor applications under microwave frequency. Journal of Applied Polymer Science . 50521. doi:10.1002/app.50521 (In Press)

Basturk, S. Bahar, Dancer, Claire E. J. and McNally, Tony (2021) Fabrication and characterization of composites of a perovskite and polymers with high dielectric permittivity. Materials Research Bulletin, 135 . 111126. doi:10.1016/j.materresbull.2020.111126

Beaumont, Richard Adrian, Masters, Iain, Das, Abhishek, Lucas, Steve, Thanikachalam, Arunn and Williams, D. K. (2021) Methodology for developing a macro finite element model of lithium‐ion pouch cells for predicting mechanical behaviour under multiple loading conditions. Energies, 14 (7). 1921. doi:10.3390/en14071921

Bhalodiya, Jayendra Maganbhai, Palit, Arnab, Giblin, Gerard, Tiwari, Manoj Kumar, Prasad, Sanjay K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, M. A. (2021) Identifying myocardial infarction using hierarchical template matching–based myocardial strain : algorithm development and usability study. JMIR Medical Informatics, 9 (2). e22164. doi:10.2196/22164

Bottarelli, Mirko, Karadimas, Petros, Epiphaniou, Gregory, Kbaier Ben Ismail, Dhouha and Maple, Carsten (2021) Adaptive and optimum secret key establishment for vehicular communications and sensing. IEEE Transactions on Vehicular Technology . (In Press)

Bradbury, Matthew S., Jhumka, Arshad and Maple, Carsten (2021) A spatial source location privacy-aware duty cycle for internet of things sensor networks. ACM Transactions on Internet of Things, 2 (1). 4. doi:10.1145/3430379

Bragaglia, Mario, McNally, Tony, Lamastra, Francesca R., Cherubini, Valeria and Nanni, Francesca (2021) Compatibilization of an immiscible blend of EPDM and POM with an Ionomer. Journal of Applied Polymer Science . 50423. doi:10.1002/app.50423 (In Press)

Brosa Planella, Ferran, Sheikh, Muhammad and Widanage, Widanalage Dhammika (2021) Systematic derivation and validation of a reduced thermal-electrochemical model for lithium-ion batteries using asymptotic methods. Electrochimica Acta . 138524. doi:10.1016/j.electacta.2021.138524 (In Press)

Bui, Truong Minh Ngoc, Dinh, Truong Quang, Marco, James and Watts, Chris (2021) Development and real-time performance evaluation of energy management strategy for a dynamic positioning hybrid electric marine vessel. Electronics, 10 (11). 1280. doi:10.3390/electronics10111280

Bungon, Theodore , Haslam, Carrie J., Damiati, Samar , O'driscoll, Benjamin, Whitley, Toby , Davey, Paul , Siligardi, Giuliano , Charmet, Jérôme and Awan, Shakil A. (2021) Graphene FET sensors for Alzheimer's Disease protein biomarker clusterin detection. Frontiers in Molecular Biosciences . doi:10.3389/fmolb.2021.651232 (In Press)

Cespedes, Sergio, Hand, Rachel A., Chmel, Nikola Paul, Moad, Graeme, Keddie, Daniel J. and Schiller, Tara L. (2021) Enhanced properties of well-defined polymer networks prepared by a sequential thiol-Michael - radical thiol-ene strategy (STMRT). European Polymer Journal . 110440. doi:10.1016/j.eurpolymj.2021.110440

Chakrabarti, Barun and Low, John C. T. (2021) Practical aspects of electrophoretic deposition to produce commercially viable supercapacitor energy storage electrodes. RSC Advances , 11 (34). pp. 20641-20650. doi:10.1039/d0ra09197a

Chen, Pei, Xie, Fengwei and McNally, Tony (2021) Understanding the effects of montmorillonite and sepiolite on the properties of solution‐cast chitosan and chitosan/silk peptide composite films. Polymer International, 70 (5). pp. 527-535. doi:10.1002/pi.6103

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2021) Cooperative effects of cellulose nanocrystals and sepiolite when combined on ionic liquid plasticised chitosan materials. Polymers, 13 (4). 571. doi:10.3390/polym13040571

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2021) Graphene oxide enhanced ionic liquid plasticisation of chitosan/alginate bionanocomposites. Carbohydrate Polymers, 253 . 117231. doi:10.1016/j.carbpol.2020.117231

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2021) Influence of plasticiser type and nanoclay on the properties of chitosan-based materials. European Polymer Journal, 144 . 110225. doi:10.1016/j.eurpolymj.2020.110225

Chen, Pei, Zhang, Yiling, Qiao, Qian, Tao, Xiaoqi, Liu, Peng and Xie, Fengwei (2021) Comparison of the structure and properties of hydroxypropylated acid-hydrolysed maize starches with different amylose/amylopectin contents. Food Hydrocolloids, 110 . 106134. doi:10.1016/j.foodhyd.2020.106134

Chen, Shufeng, Khastgir, Siddartha and Jennings, P. A. (Paul A.) (2021) Analyzing national responses to COVID-19 pandemic using STPA. Safety Science, 138 . 105195. doi:10.1016/j.ssci.2021.105195

Dong, Ran, Woodman, Roger, Jennings, Paul. A., Brewerton, Simon, Birrell, Stewart A. and Higgins, Matthew D. (2021) A simulation study of platooning AV fleet service in shared urban environments with uncertainties. Transportation Engineering, 4 . 100062. doi:10.1016/j.treng.2021.100062

Du, Yuxuan, Yang, Xinliang, Li, Zushu, Hao, Fang, Mao, Youchuang, Li, Shaoqiang, Liu, Xianghong, Feng, Yong and Yan, Zhiming (2021) Shear localization behavior in the hat-shaped specimen of near-α Ti-6Al-2Zr-1Mo-1V titanium alloy loaded at a high strain rate. Transactions of Nonferrous Metals Society of China . (In Press)

Espineira, Juan, Robinson, Jonathan, Groenewald, Jakobus, Chan, Pak Hung and Donzella, Valentina (2021) Realistic LiDAR with noise model for real-time testing of automated vehicles in a virtual environment final. Sensors Journal . pp. 1-8. doi:10.1109/JSEN.2021.3059310

Fan, Chuanxin, O'Regan, K., Li, Liuying, Kendrick, E. and Widanage, Widanalage Dhammika (2021) Frequency domain non-linear characterisation and analysis of lithium-ion battery electrodes. Journal of Energy Storage, 36 . 102371. doi:10.1016/j.est.2021.102371

Guo, Weisi, Abbaszadeh, Mahmoud, Lin , Lin, Charmet, Jérôme, Thomas, Peter J., Wei, Zhuangkun, li, Bin and Zhao, Chenglin (2021) Molecular physical layer for 6G in wave-denied environments. IEEE Communications Magazine . (In Press)

Guo, Yabin, Zhang, Binjia, Zhao, Siming, Qiao, Dongling and Xie, Fengwei (2021) Plasticized starch/agar composite films : processing, morphology, structure, mechanical properties and surface hydrophilicity. Coatings, 11 (3). 311. doi:10.3390/coatings11030311

Harrison, Robert, Vera, Daniel A. and Ahmad, Bilal (2021) A connective framework to support the lifecycle of cyber-physical production systems. Proceedings of the IEEE . doi:10.1109/JPROC.2020.3046525 (In Press)

He, Hai, Bian, Huawei, Xie, Fengwei and Cheng, Ling (2021) Different effects of pectin and κ-carrageenan on the multiscale structures and in vitro digestibility of extruded rice starch. Food Hydrocolloids, 111 . 106216. doi:10.1016/j.foodhyd.2020.106216

Hofler, Thomas, Linder, Bernhard, Angeli, Gerhard, Gierl-Mayer, Christian, Danninger, Herbert and Auinger, Michael (2021) Internal oxidation and formation of Si/Al-enriched oxide bands in the scale of electrical steel grades. Corrosion Science, 187 . 109502. doi:10.1016/j.corsci.2021.109502

Hosseinzadeh, Elham, Arias, Sebastian, Krishna, Muthu, Worwood, Daniel, Barai, Anup, Widanage, Widanalage Dhammika and Marco, James (2021) Quantifying cell-to-cell variations of a parallel battery module for different pack configurations. Applied Energy, 282 (Part A). 115859. doi:10.1016/j.apenergy.2020.115859

Hsu, Ching-Pai, Li, Boda, Solano-Rivas, Braulio, Gohil, Amar, Chan, Pak Hung, Moore, Andrew D. and Donzella, Valentina (2021) A review and perspective on optical phased array for automotive LiDAR. IEEE Journal of Selected Topics in Quantum Electronics, 27 (1). pp. 1-16. doi:10.1109/JSTQE.2020.3022948

Htet, Theint Theint, Yan, Zhiming, Spooner, Stephen, Degirmenci, Volkan, Meijer, Koen and Li, Zushu (2021) Gasification and physical-chemical characteristics of carbonaceous materials in relation to HIsarna ironmaking process. Fuel, 289 . 119890. doi:10.1016/j.fuel.2020.119890

Ibn-Mohammed, T., Mustapha, K. B., Godsell, J., Adamu, Z., Babatunde, K. A., Akintade, D. D., Acquaye, A., Fujii, H., Ndiaye, M. M., Yamoah, F. A. and Koh, S. C. L. (2021) A critical analysis of the impacts of COVID-19 on the global economy and ecosystems and opportunities for circular economy strategies. Resources, Conservation, and Recycling, 164 . 105169. doi:10.1016/j.resconrec.2020.105169

Ji, Mo, Strangwood, Martin and Davis, Claire (2021) Effect of strain-induced precipitation on the recrystallization kinetics in a model alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 52 . pp. 1963-1975. doi:10.1007/s11661-021-06206-8

Kapoor, Ishwar, Davis, Claire and Li, Zushu (2021) Effect of residual elements during the casting process of steel production : a critical review. Ironmaking & Steelmaking . doi:10.1080/03019233.2021.1898869 (In Press)

Kartanas, Tadas, Levin, Aviad, Toprakcioglu, Zenon, Scheidt, Tom, Hakala, Tuuli A., Charmet, Jérôme and Knowles, Tuomas P. J. (2021) Label-free protein analysis using liquid chromatography with gravimetric detection. Analytical Chemistry, 93 (5). pp. 2848-2853. doi:10.1021/acs.analchem.0c04149

Khan, M. H. , Das, A., Li, Zushu and Kotadia, Hiren (2021) Effects of Fe, Mn, chemical grain refinement and cooling rate on the evolution of Fe intermetallics in a model 6082 Al-alloy. Intermetallics, 123 . 107132. doi:10.1016/j.intermet.2021.107132

Khasraw, Darbaz, Spooner, Stephen, Hage, Hans, Koen , Meijer and Li, Zushu (2021) Devolatilisation characteristics of coal and biomass with respect to temperature and heating rate for HIsarna alternative ironmaking process. Fuel, 284 . 119101. doi:10.1016/j.fuel.2020.119101

Khasraw, Darbaz, Spooner, Stephen, Hage, Hans, Meijer, Koen and Li, Zushu (2021) Evaluation of devolatilization behaviour of different carbonaceous materials under rapid heating for the novel HIsarna ironmaking process. Fuel, 292 . 120329. doi:10.1016/j.fuel.2021.120329

Khastgir, Siddartha, Brewerton, Simon, Thomas, John and Jennings, Paul. A. (2021) Systems approach to creating test scenarios for automated driving systems. Reliability Engineering & System Safety . 107610. doi:10.1016/j.ress.2021.107610 (In Press)

King, Ellie, Smith, M. Paul, Wilson, Paul and Williams, Mark A. (2021) Digital responses of UK museum exhibitions to the COVID‐19 crisis, March – June 2020. Curator: The Museum Journal . doi:10.1111/cura.12413 (In Press)

Koleti, Upender Rao, Bui, Truong Ngoc Minh, Dinh, Truong Quang and Marco, James (2021) The development of optimal charging protocols for lithium-ion batteries to reduce lithium plating. Journal of Energy Storage, 39 . 102573. doi:10.1016/j.est.2021.102573

Kumar, Nikhil, Das, Abhishek, Dale, Tom and Masters, Iain (2021) Laser wobble welding of fluid-based cooling channel joining for battery thermal management. Journal of Manufacturing Processes, 67 . pp. 151-169. doi:10.1016/j.jmapro.2021.04.064

Lemola, Sakari, Gkiouleka, Anna, Read, Brieze, Realo, Anu, Walasek, Lukasz, Tang, Nicole K. Y. and Elliott, Mark T. (2021) Can a ‘rewards-for-exercise app’ increase physical activity, subjective well-being and sleep quality? An open-label single-arm trial among university staff with low to moderate physical activity levels. BMC Public Health, 21 (1). 782. doi:10.1186/s12889-021-10794-w

Li, Dezhi (2021) A review of microstructure evolution during ultrasonic additive manufacturing. The International Journal of Advanced Manufacturing Technology . doi:10.1007/s00170-020-06439-8 (In Press)

Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B. and Xie, Fengwei (2021) 3D printing to innovate biopolymer materials for demanding applications : a review. Materials Today Chemistry, 20 . 100459. doi:10.1016/j.mtchem.2021.100459

Li, Nannan, Zhao, Siming, Qiao, Dongling, Lin, Qinlu, Zhang, Binjia and Xie, Fengwei (2021) Multiscale structural disorganization of indica rice starch under microwave treatment with high water contents. ACS Food Science & Technology, 1 (1). pp. 45-53. doi:10.1021/acsfoodscitech.0c00080

Liu, Jun and Davis, Claire (2021) Tensorial permeability microstructure model considering crystallographic 2 texture and grain size for evaluation of magnetic anisotropy in 3 polycrystalline steels. Philoscopical Magazine . doi:10.1080/14786435.2021.1892229 (In Press)

Liu, Kailong, Hu, Xiaosong, Zhou, Huiyu, Tong, Lei, Widanage, Widanalage Dhammika and Marco, James (2021) Feature analyses and modelling of lithium-ion batteries manufacturing based on random forest classification. IEEE/ASME Transactions on Mechatronics . doi:10.1109/TMECH.2020.3049046 (In Press)

Liu, Zipeng, Cheng, Ling, Bie, Pingping, Xie, Fengwei and Zheng, Bo (2021) An insight into the structural evolution of waxy maize starch chains during growth based on nonlinear rheology. Food Hydrocolloids, 116 . 106655. doi:10.1016/j.foodhyd.2021.106655

Long, Shuangyan, Zhong, Lei, Lin, Xuliang, Chang, Xiaogang, Wu, Fuqi, Wu, Ruchun and Xie, Fengwei (2021) Preparation of formyl cellulose and its enhancement effect on the mechanical and barrier properties of polylactic acid films. International Journal of Biological Macromolecules, 172 . pp. 82-92. doi:10.1016/j.ijbiomac.2021.01.029

Luca, Robert, Whiteley, Michael, Neville, Toby, Tranter, Tom, Weaving, Julia, Marco, James, Shearing, Paul R. and Brett, Dan J. L. (2021) Current imbalance in parallel battery strings measured using a hall‐effect sensor array. Energy Technology . 2001014. doi:10.1002/ente.202001014 (In Press)

Marnerides, Demetris, Bashford-Rogers, Thomas and Debattista, Kurt (2021) Deep HDR hallucination for inverse tone mapping. Sensors, 21 (12). 4032. doi:10.3390/s21124032

Marshall, Jean, Zhenova, Anna, Roberts, Samuel, Petchey, Tabitha, Zhu, Pengcheng, Dancer, Claire E. J., McElroy, Con R., Kendrick, Emma and Goodship, Vannessa (2021) On the solubility and stability of polyvinylidene fluoride. Polymers, 13 (9). 1354. doi:10.3390/polym13091354

Melnicuk, Vadim, Thompson, Simon, Jennings, Paul. A. and Birrell, Stewart A. (2021) Effect of cognitive load on drivers’ State and task performance during automated driving : introducing a novel method for determining stabilisation time following take-over of control. Accident Analysis & Prevention, 151 . 105967. doi:10.1016/j.aap.2020.105967

Moreno, Carlos, Winnett, James and Williams, T. (2021) On the effect of anisotropy on the performance and simulation of shrinking tubes used as energy absorbers for railway vehicles. Thin-Walled Structures, 161 . 107513. doi:10.1016/j.tws.2021.107513

Muggleton, N., Parpart, P., Newall, Philip, Leake, D., Gathergood, J. and Stewart, Neil (2021) The association between gambling and financial, social, and health outcomes in big financial data. Nature Human Behaviour, 5 . pp. 319-326. doi:10.1038/s41562-020-01045-w

Nguyen, Anh-Tu, Dinh, Truong Quang, Guerra, Thierry-Marie and Pan, Juntao (2021) Takagi-Sugeno fuzzy unknown input observers to estimate nonlinear dynamics of autonomous ground vehicles : theory and real-time verification. IEEE/ASME Transactions on Mechatronics . doi:10.1109/TMECH.2020.3049070 (In Press)

Ozpolat, Mumin, Bhargava, Kushagra, Kampert, Erik and Higgins, Matthew D. (2021) Multi-lane urban mmWave V2V networks : a path loss behaviour dependent coverage analysis. Vehicular Communications, 30 . 100348. doi:10.1016/j.vehcom.2021.100348

Pan, Min, Yuan, Chenggang, Pickford, Tom, Tian, Jianhui, Ellingford, Christopher, Zhou, Ning, Bowen, Christopher and Wan, Chaoying (2021) Piezoelectric-driven self-sensing leaf-mimic actuator enabled by integration of a self-healing dielectric elastomer and a piezoelectric composite. Advanced Intelligent Systems . 2000248. doi:10.1002/aisy.202000248 (In Press)

Perelló-March, Jaume R., Burns, Christopher, Woodman, Roger, Elliott, Mark T. and Birrell, Stewart A. (2021) Driver state monitoring : manipulating reliability expectations in simulated automated driving scenarios. IEEE Transactions on Intelligent Transportation Systems . pp. 1-11. doi:10.1109/TITS.2021.3050518 (In Press)

Praig, Vera G., Stoger-Pollach, Michael, Schintlmeister, Arno, Auinger, Michael and Danninger, Herbert (2021) High-resolution topochemical analysis and thermochemical simulations of oxides and nitrides at grain boundaries and within the grains of a low alloy Mn-Cr hot-rolled steel sheet. Journal of Alloys and Compounds . 160069. doi:10.1016/j.jallcom.2021.160069 (In Press)

Radanliev, Petar, De Roure, David, Page, Kevin, Van Kleek, Max, Santos, Omar, Maddox, La’Treall, Burnap, Peter, Anthi, Eirini and Maple, Carsten (2021) Design of a dynamic and self-adapting system, supported with artificial intelligence, machine learning and real-time intelligence for predictive cyber risk analytics in extreme environments – cyber risk in the colonisation of Mars. Safety in Extreme Environments . doi:10.1007/s42797-021-00025-1 (In Press)

Ramazashvili, R., Grigoriev, P. D., Helm, T., Kollmannsberger, F., Kunze, M., Biberacher, W., Kampert, Erik, Fujiwara, H., Erb, A., Wosnitza, J., Gross, R. and Kartsovnik, M. V. (2021) Experimental evidence for Zeeman spin–orbit coupling in layered antiferromagnetic conductors. npj Quantum Materials, 6 (1). 11. doi:10.1038/s41535-021-00309-6

Raviraj, Akalya, Kourra, Nadia, Williams, M. A., Abbel, Gert, Davis, Claire, Tiekink, Wouter, Sridhar, Seetharaman and Spooner, Stephen (2021) The spontaneous emulsification of entrained inclusions during casting of high aluminum steels. Metallurgical and Materials Transactions B . doi:10.1007/s11663-021-02091-z (In Press)

Robbins, Tim, Sankaranarayanan, Sailesh, Randeva, Harpal S., Lim Choi Keung, Sarah Niukyun and Arvanitis, Theodoros N. (2021) Association between glycosylated haemoglobin and outcomes for patients discharged from hospital with diabetes : a health informatics approach. Digital Health, 7 . pp. 1-10. doi:10.1177/20552076211007661

Sahu, Suryakanta, Mypati, Omkar, Pal, Surjya K., Shome, Mahadev and Srirangam, Prakash (2021) Effect of weld parameters on joint quality in friction stir welding of Mg 2 alloy to DP steel dissimilar materials. CIRP Journal of Manufacturing Science and Technology . (In Press)

Sarkar, Rahul and Li, Zushu (2021) Isothermal and non-isothermal crystallization kinetics of mold fluxes used in continuous casting of steel : a review. Metallurgical and Materials Transactions B, 52 . pp. 1357-1378. doi:10.1007/s11663-021-02099-5

SenGupta, Arunava, Santillana, Begoña , Sridharan, Sridhar and Auinger, Michael (2021) A multiscale-based approach to understand dendrite deflection in continuously cast steel slab samples. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-021-06313-6 (In Press)

Shi, Kai, Bui, Truong Minh Ngoc and Marco, James (2021) Optimal control of bidirectional active clamp forward converter with synchronous rectifier based cell-to-external-storage active balancing system. Journal of Energy Storage . doi:10.1016/j.est.2021.102851 (In Press)

Singh, Anubhav, Reynolds, Neil, Keating, Elspeth, Barnett, Alastair E, Barbour, Steve K and Hughes, Darren J. (2021) Three-point flexural performance of tailor-braided thermoplastic composite beam structures. Composite Structures, 260 . 113521. doi:10.1016/j.compstruct.2020.113521

Singh, Swaran P., Mohan, Mohapradeep, Iyer, Srividya N., Meyer, Caroline, Currie, Graeme, Shah, Jai, Madan, Jason, Birchwood, M. J., Sood, Mamta, Ramachandran, Padmavati, Chadda, Rakesh K., Lilford, Richard J., Rangaswamy, Thara and Furtado, Vivek (2021) The Warwick-India-Canada (WIC) global mental health group : rationale, design and protocol. BMJ Open . e046362. doi:10.1136/bmjopen-2020-046362

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Dariusz (2021) Building a scalable and interpretable bayesian deep learning framework for quality control of free form surfaces. IEEE Access . doi:10.1109/ACCESS.2021.3068867 (In Press)

Smyth, Joseph, Birrell, Stewart A., Woodman, Roger and Jennings, P. A. (Paul A.) (2021) Exploring the utility of EDA and skin temperature as individual physiological correlates of motion sickness. Applied Ergonomics, 92 . 103315. doi:10.1016/j.apergo.2020.103315

Smyth, Joseph, Jennings, Paul. A., Bennett, Peter and Birrell, Stewart A. (2021) A novel method for reducing motion sickness susceptibility through training visuospatial ability – a two-part study. Applied Ergonomics, 90 . 103264. doi:10.1016/j.apergo.2020.103264

Sommervill, Roberto, Zhu, Pengcheng, Ali Rajaeifar, Mohammad, Heidrich, Oliver, Goodship, Vannessa and Kendrick, Emma (2021) A qualitative assessment of lithium ion battery recycling processes. Resources, Conservation and Recycling, 165 . 105219. doi:10.1016/j.resconrec.2020.105219

Sultanova, Leyla and Figiel, Lukasz (2021) Microscale diffusion-mechanics model for a polymer-based solid-state battery cathode. Computational Materials Science, 186 . 109990. doi:10.1016/j.commatsci.2020.109990

Sun, Tianzhu, Franciosa, Pasquale, Liu, Conghui, Pierro, Fabio and Ceglarek, Dariusz (2021) Effect of micro solidification crack on mechanical performance of remote laser welded AA6063-T6 fillet lap joint in automotive battery tray construction. Applied Sciences, 11 (10). 4522. doi:10.3390/app11104522

Tan, Xiaoyan, Wang, Guowei, Zhong, Lei, Xie, Fengwei, Lan, Ping and Chi, Bo (2021) Regeneration behavior of chitosan from ionic liquid using water and alcohols as anti-solvents. International Journal of Biological Macromolecules, 166 . pp. 940-947. doi:10.1016/j.ijbiomac.2020.10.251

Wang, Yanfei, Yu, Long, Sun, Qingjie and Xie, Fengwei (2021) Hydroxypropyl methylcellulose and hydroxypropyl starch : rheological and gelation effects on the phase structure of their mixed hydrocolloid system. Food Hydrocolloids, 115 . 106598. doi:10.1016/j.foodhyd.2021.106598

Wang, Yi, Zhang, Lifeng, Ren, Ying, Li, Zushu, Slater, Carl, Peng, Kaiyu, Li, Fenggang and Zhao, Yanyu (2021) Effect of compression temperature on deformation of CaO-CaS-Al2O3-MgO inclusions in pipeline steel. Journal of Materials Research and Technology, 11 . pp. 1220-1231. doi:10.1016/j.jmrt.2021.01.107

Wang, Yi, Zhang, Lifeng, Ren, Ying, Li, Zushu, Slater, Carl, Peng, Kaiyu, Liu, Fenggang and Zhao, Yanyu (2021) Effect of compression reduction on deformation of CaO‐CaS‐Al 2 O 3 ‐MgO inclusions in solid and semi‐solid steel. Steel Research International . doi:10.1002/srin.202000609 (In Press)

Wang, Yi, Zhang, Lifeng, Ren, Ying, Li, Zushu, Slater, Carl, Peng, Kaiyu, Liu, Fenggang and Zhao, Yanyu (2021) Effect of thermal history on the deformation of non-metallic inclusions during plain strain compression. Metallurgical and Materials Transactions B . doi:10.1007/s11663-021-02116-7

Weickert, Martin O., Robbins, Tim, Kyrou, Ioannis, Hopper, Adam, Pearson, Eilish, Barber, Thomas M., Kaltsas, Gregory and Randeva, Harpal S. (2021) Impact of the COVID-19 pandemic on neuroendocrine tumour services in England. Endocrine, 71 . pp. 14-19. doi:10.1007/s12020-020-02564-2

Wemyss, Alan M., Ellingford, Christopher, Morishita, Yoshihiro, Bowen, Christopher and Wan, Chaoying (2021) Dynamic polymer networks : a new avenue towards sustainable and advanced soft machines. Angewandte Chemie . doi:10.1002/anie.202013254 (In Press)

Wu, Fuqi, Zhou, Zeguang, Liang, Manling, Zhong, Lei and Xie, Fengwei (2021) Ultrasonication improves the structures and physicochemical properties of Cassava starch films containing acetic acid. Starch - Stärke, 73 (1-2). 2000094. doi:10.1002/star.202000094

Xu, X., Gao, F., Lopera Valle, K., Makenji, K., Nedolisa, C., Zhao, Y., Goodship, Vannessa and Mao, Ken (2021) Wear performance of commercial polyoxymethylene copolymer and homopolymer injection moulded gears. Tribology in Industry . doi:10.24874/ti.1039.01.21.04 (In Press)

Yang, Xinliang, Tang, Fengzai, Hao, Xinjiang and Li, Zushu (2021) Oxide evolution during the solidification of 316L stainless steel from additive manufacturing powders with different oxygen contents. Metallurgical and Materials Transactions B . doi:10.1007/s11663-021-02191-w (In Press)

Yu, Yifei, Vergori, Elena, Worwood, Daniel, Tripathy, Yashraj, Guo, Yue, Somá, Aurelio, Greenwood, David and Marco, James (2021) Distributed thermal monitoring of lithium ion batteries with optical fibre sensors. Journal of Energy Storage, 39 . 102560. doi:10.1016/j.est.2021.102560

Zan, Ke, Wang, Jinwei, Ren, Fei, Yu, Jinglin, Wang, Shuo, Xie, Fengwei and Wang, Shujun (2021) Structural disorganization of cereal, tuber and bean starches in aqueous ionic liquid at room temperature : role of starch granule surface structure. Carbohydrate Polymers, 258 . 117677. doi:10.1016/j.carbpol.2021.117677

Zhang, Binjia, Qiao, Dongling, Zhao, Siming, Lin, Qinlu, Wang, Jing and Xie, Fengwei (2021) Starch-based food matrices containing protein : recent understanding of morphology, structure, and properties. Trends in Food Science & Technology, 114 . pp. 212-231. doi:10.1016/j.tifs.2021.05.033

Zhang, Binjia, Yuan, Zi, Qiao, Dongling, Zhao, Siming, Lin, Qinlu and Xie, Fengwei (2021) Wet ball milling of indica rice starch effectively modifies its multilevel structures and pasting behavior. ACS Food Science & Technology . doi:10.1021/acsfoodscitech.0c00159 (In Press)

Zhang, Zhen, Li, Jiayi, Wan, Chaoying, Zhang, Yuxin and Wang, Shifeng (2021) Understanding H2O2-induced thermo-oxidative reclamation of vulcanized styrene butadiene rubber at low temperatures. ACS Sustainable Chemistry & Engineering . doi:10.1021/acssuschemeng.0c08867 (In Press)

Zhu, Jiashu, Wan, Chaoying, Xu, Hong, Liu, Ying, Zhuang, Jian, Sun, Jingyao, Gao, Xiaolong, McNally, Tony, Huang, Yao and Wu, Daming (2021) An anchoring array assembly method for enhancing the electrical conductivity of composites of polypropylene and hybrid fillers. Composites Science and Technology . 108846. doi:10.1016/j.compscitech.2021.108846 (In Press)

Zhu, Pengcheng, Gastol, Dominika E., Marshall, Jean, Sommerville, Roberto, Goodship, Vannessa and Kendrick, Emma (2021) A review of current collectors for lithium-ion batteries. Journal of Power Sources, 485 . 229321. doi:10.1016/j.jpowsour.2020.229321

Book Item

Smyth, Joseph, Robinson, Jonathan, Burridge, Rebecca, Jennings, Paul. A. and Woodman, Roger (2021) Towards the management and mitigation of motion sickness – an update to the field. In: Black, Nancy and Neumann, Patrick and Noy, Ian, (eds.) Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021) : Volume III: Sector Based Ergonomics. Lecture Notes in Networks and Systems, 221 . Springer International Publishing, pp. 834-840. ISBN 9783030746070

Conference Item

Ademi, Sul, Ridge, Alex, McMahon, Richard A., Kelly, Hugh-Peter and Clifton, Peter (2021) Design and testing of a 250 kW ferrite based axial flux permanent magnet for application in wind power generation. In: The 10th International Conference on Power Electronics, Machines and Drives (PEMD), Virtual conference (In Press)

Assad, Fadi, Konstantinov, Sergey, Ahmad, Mus'ab, Rushforth, Emma and Harrison, Robert (2021) Utilising web-based digital twin to promote assembly line sustainability. In: 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems, Victoria, Canada, 10-12 May 2021 (In Press)

Dhara, Sisir, Taylor, Scott, Figiel, Lukasz, Hughes, Darren J., Shollock, Barbara A. and Hazra, Sumit (2021) In-situ study of strain and texture evolution during continuous strain path change. In: ESAFORM 2021 : 24th International Conference on Material Forming, Liège, Belgium, 14-16 Apr 2021 doi:10.25518/esaform21.2168

Faraji Niri, Mona, Liu, Kailong, Apachitei, Geanina, Roman Ramirez, Luis, Widanage, Widanalage Dhammika and Marco, James (2021) Data mining for quality prediction of battery in manufacturing process : Cathode coating process. In: International Conference on Applied Energy 2020, Bangkok, Thailand; Virtual, 1-10 Dec 2020. Published in: Proceedings of 12th International Conference on Applied Energy, 2020, 11 (3). ISBN 9789198673821.

Kampert, Erik, Adegoke, E. I., Stuhlfauth, Reiner and Higgins, Matthew D. (2021) On-campus over-the-air millimeter-wave channel evaluation for connected and automated mobility. In: 2021 15th European Conference on Antennas and Propagation (EuCAP), Dusseldorf, Germany, 22-26 Mar 2021 ISBN 9781728188454. doi:10.23919/EuCAP51087.2021.9411473

Kirca, Mehmet, McGordon, Andrew and Dinh, Quang Truong (2021) Multi-input multi-output model of an airport infrastructure for reducing carbon-dioxide emissions. In: IEEE Conference on Vehicle Power and Propulsion (VPPC), Virtual conference, 18 Nov-16 Dec 2020. Published in: IEEE Conference on Vehicle Power and Propulsion (VPPC) (In Press)

Konstantinov, Sergey, Assad, Fadi, Azam, Wajid, Vera, Daniel A., Ahmad, Bilal and Harrison, Robert (2021) Developing web-based digital twin for industrial cyber-physical systems. In: 4th IEEE International Conference on Industrial Cyber-Physical Systems, Victoria, Canada, 10-12 May 2021 (In Press)

Li, Zushu, Li, Juncheng, Spooner, Stephen and Sridhar, Seetharaman (2021) BOS slag : formation, reaction, and energy and materials recovery. In: MOLTEN2021 (The 11th International Conference on Molten Slags, Fluxes and Salts), Virtual, Korea, 21-25 Feb 2021

(2021) COVID 19 - lessons for the service professional. In: 28th EurOMA Conference, Berlin, Germany, 04 -07 Jul 2021 (Submitted)

Ridge, Alex, Konaklieva, Silvia, Bradley, Stuart, McMahon, Richard A. and Kumar, Krishna (2021) Power electronics packaging for in-road wireless charging installations. In: 2021 IEEE Workshop on Emerging Technologies: Wireless Power (WoW), San Diego, USA, 1-4 June 2021. Published in: Proceedings of 2021 IEEE Workshop on Emerging Technologies: Wireless Power (WoW) (In Press)

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Darek (2021) Object shape error response using Bayesian 3D convolutional neural networks for assembly systems with compliant parts. In: 18th IEEE International Conference on Industrial Informatics (INDIN), Coventry, 20-23 Jul 2020. Published in: 2020 IEEE 18th International Conference on Industrial Informatics (INDIN) pp. 104-109. ISBN 9781728149646. ISSN 2378-363X. doi:10.1109/INDIN45582.2020.9442245

Yang, Han, Ademi, Sul, Paredes, J. and McMahon, Richard A. (2021) Comparative study of motor topologies for electric power steering system. In: IEEE Workshop on Electrical Machines Design, Control and diagnostics (WEMDCD), Virtual conference, 8-9 Apr 2021 (In Press)

Zhang, Xizhe, Khastgir, Siddartha, Asgari, Hamid and Jennings, P. A. (Paul A.) (2021) Test framework for automatic test case generation and execution aimed at developing trustworthy AVs from both verifiability and certifiability aspects. In: The 24th IEEE International Conference on Intelligent Transportation Systems (ITSC 2021), Indianapolis, IN, United States, 19-22 Sep 2021 (In Press)

Report

Hall, Russell, Zhang, Wanrong and Li, Zushu (2021) Domestic scrap steel recycling – economic, environmental and social opportunities (EV0490). UK: DEFRA Science and Research projects.

Dataset

Cannizzaro, Sara, Procter, Rob, Maple, Carsten and Ma, Sinong (2021) Trust in the smart home-dataset. [Dataset]

Chen, Changhui, Brosa Planella, Ferran, O'Regan, Kieran, Gastol, Dominika, Widanage, W. Dhammika and Kendrick, Emma (2021) Data for Development of experimental techniques for parameterization of multi-scale Lithium-ion battery models. [Dataset]

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Dariusz (2021) Point cloud object shape error datasets for root cause analysis of multi-station assembly systems. [Dataset]