Journal Article

UNSPECIFIED (1983) ABSOLUTE IONIC PARTIAL MOLAL HYDRATION VOLUMES IN WATER AT 298-K. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 48 (6). pp. 493-503. ISSN 0141-8637.

UNSPECIFIED (1989) ACTIVATED CARBON ADSORPTION CYCLES FOR REFRIGERATION AND HEAT PUMPING. CARBON, 27 (1). pp. 63-70. ISSN 0008-6223.

UNSPECIFIED (1987) ADSORPTION SITE IDENTIFICATION IN SURFACE EXTENDED X-RAY ABSORPTION FINE-STRUCTURE. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 5 (4 Part 1). pp. 914-918. ISSN 0734-2101.

UNSPECIFIED (1986) AERODYNAMIC RESPONSE OF MAGLEV TRAIN MODELS TO A CROSSWIND GUST. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 22 (2-3). pp. 205-213. ISSN 0167-6105.

UNSPECIFIED (1994) AIR-COUPLED PIEZOELECTRIC DETECTION OF LASER-GENERATED ULTRASOUND. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 41 (6). pp. 796-805. ISSN 0885-3010.

UNSPECIFIED (1995) ANALYSIS AND REDUCTION OF VIBRATION AND ACOUSTIC NOISE IN THE SWITCHED RELUCTANCE DRIVE. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 31 (1). pp. 91-98. ISSN 0093-9994.

UNSPECIFIED (1994) THE ANALYSIS OF ADHESIVE BONDS USING ELECTROMAGNETIC ACOUSTIC TRANSDUCERS. ULTRASONICS, 32 (6). pp. 425-430. ISSN 0041-624X.

UNSPECIFIED (1991) ANALYSIS OF SEMIRIGID STEEL FRAMES AND CRITERIA FOR THEIR DESIGN. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 18 (3). pp. 227-237. ISSN 0143-974X.

UNSPECIFIED (1994) ANGLE LAPPING OF MULTILAYER STRUCTURES FOR THICKNESS MEASUREMENTS USING FOCUSED ION-BEAM MICROMACHINING. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 9 (3). pp. 249-255. ISSN 0268-1242.

UNSPECIFIED (1990) APPLICATION OF ARTIFICIAL NEURAL NETWORKS TO AN ELECTRONIC OLFACTORY SYSTEM. MEASUREMENT SCIENCE & TECHNOLOGY, 1 (5). pp. 446-451. ISSN 0957-0233.

UNSPECIFIED (1983) APPLICATION OF COMPLEX DEMODULATION TECHNIQUES TO SURFACE-ANALYSIS. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 5 (1). pp. 17-21. ISSN 0141-6359.

UNSPECIFIED (1995) APPLICATION OF NEURAL NETWORKS TO THE RECONSTRUCTION OF SCANNING PROBE MICROSCOPE IMAGES DISTORTED BY FINITE-SIZE TIPS. NANOTECHNOLOGY, 6 (2). pp. 45-51. ISSN 0957-4484.

UNSPECIFIED (1984) APPLICATION OF TEM EXTENDED ELECTRON-ENERGY LOSS FINE-STRUCTURE TO THE STUDY OF ALUMINUM-OXIDE FILMS. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 49 (3). pp. 341-352. ISSN 0141-8610.

UNSPECIFIED (1988) THE APPLICATION OF THE EXTENDED PAIR APPROXIMATION TO HOPPING CONDUCTION IN RF SPUTTERED AMORPHOUS-SILICON. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 58 (2). pp. 153-169. ISSN 0141-8637.

UNSPECIFIED (1995) APPLICATIONS OF MICROMACHINED CAPACITANCE TRANSDUCERS IN AIR-COUPLED ULTRASONICS AND NONDESTRUCTIVE EVALUATION. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 42 (1). pp. 51-58. ISSN 0885-3010.

UNSPECIFIED (1983) AUGER VS RESONANCE NEUTRALIZATION IN LOW-ENERGY HE+ ION-SCATTERING. VACUUM, 33 (10-1). pp. 651-653. ISSN 0042-207X.

UNSPECIFIED (1992) AUTOMATED MEASUREMENT OF ULTRASOUND VELOCITY AND ATTENUATION. ULTRASONICS, 30 (6). pp. 347-350. ISSN 0041-624X.

UNSPECIFIED (2000) Adsorption structures of 1-octanethiol on Cu(111) studied by scanning tunneling microscopy. LANGMUIR, 16 (16). pp. 6693-6700. ISSN 0743-7463.

UNSPECIFIED (2001) Agile control systems. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 215 (D2). pp. 189-195. ISSN 0954-4070.

UNSPECIFIED (1997) Air-coupled lamb wave tomography. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 44 (1). pp. 53-59. ISSN 0885-3010.

UNSPECIFIED (1997) Air-coupled ultrasonic NDE of bonded aluminum lap joints. ULTRASONICS, 35 (1). pp. 1-6. ISSN 0041-624X.

UNSPECIFIED (1999) Air-coupled ultrasonic testing of metals using broadband pulses in through-transmission. ULTRASONICS, 37 (1). pp. 19-22. ISSN 0041-624X.

UNSPECIFIED (1997) Aligned hexagonal ferrite fibres of Co2W, BaCo2Fe16O27 produced from an aqueous sol-gel process. JOURNAL OF MATERIALS SCIENCE, 32 (4). pp. 873-877. ISSN 0022-2461.

UNSPECIFIED (2002) All in one microscope measures up. MATERIALS WORLD, 10 (2). pp. 23-24. ISSN 0967-8638.

UNSPECIFIED (2002) Analyis of hole mobility and strain in a Si/Si0.5Ge0.5/Si metal oxide semiconductor field effect transistor. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 17 (7). pp. 708-715. ISSN 0268-1242.

UNSPECIFIED (2005) Analytical magnetic distributions and Stoner-Wohlfarth theory for near-uniformly magnetised rectangular nanomagnets. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 295 (3). pp. 197-218. doi:10.1016/j.jmmm.2004.11.581 ISSN 0304-8853.

UNSPECIFIED (2006) Analytically modelling the effects of interaction between two or more rectangular nanomagnets. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 296 (1). pp. 46-56. doi:10.1016/j.jmmm.2005.01.028 ISSN 0304-8853.

UNSPECIFIED (2005) Anisotropic elastic properties of microtubules. EUROPEAN PHYSICAL JOURNAL E, 17 (1). pp. 29-35. doi:10.1140/epje/i2004-10102-5 ISSN 1292-8941.

UNSPECIFIED (2004) Anisotropic size quantization and semimetal-semiconductor phase transition in bismuth-like cylindrical nanowires. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 19 (1). pp. 106-112. doi:10.1088/0268-1242/19/1/018 ISSN 0268-1242.

UNSPECIFIED (2005) Apparent fracture toughness of Si3N4-based laminates with residual compressive or tensile stresses in surface layers. ACTA MATERIALIA, 53 (2). pp. 289-296. doi:10.1016/j.actamat.2004.09.022 ISSN 1359-6454.

UNSPECIFIED (2005) Apparent texture symmetry deviations in aluminum sheet. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 52 (10). pp. 1791-1796. ISSN 0885-3010.

UNSPECIFIED (2002) Applications of modern automated photoelasticity to industrial problems. INSIGHT, 44 (4). pp. 224-227. ISSN 1354-2575.

UNSPECIFIED (2004) Applying Lean Thinking to new product introduction. JOURNAL OF ENGINEERING DESIGN, 15 (1). pp. 1-31. doi:10.1080/0954482031000150125 ISSN 0954-4828.

UNSPECIFIED (1999) Aspects of the tensile response of random continuous glass epoxy composites. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 18 (7). pp. 606-613. ISSN 0731-6844.

UNSPECIFIED (1997) Assessing the value of information systems planning at Heath Springs. INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 13 (4). pp. 426-442. ISSN 0267-5730.

UNSPECIFIED (1998) Asymptotic behaviour of the oscillatory exchange coupling across alloy spacers: a first-principles approach. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 78 (5-6). pp. 577-584. ISSN 0141-8637.

UNSPECIFIED (1998) Atom transfer polymerisation of methyl methacrylate: use of chiral aryl/alkyl pyridylmethanimine ligands; with copper(I) bromide and as structurally characterised chiral copper(I) complexes. JOURNAL OF MATERIALS CHEMISTRY, 8 (7). pp. 1525-1532. ISSN 0959-9428.

UNSPECIFIED (2005) Atomic force microscopy investigation of the mechanism of calcite microcrystal growth under Kitano conditions. LANGMUIR, 21 (4). pp. 1255-1260. doi:10.1021/la0480787 ISSN 0743-7463.

UNSPECIFIED (1997) Automated procedures for Boolean operations on finite element meshes. ENGINEERING COMPUTATIONS, 14 (6-7). 702-+. ISSN 0264-4401.

UNSPECIFIED (1987) BAND-STRUCTURE OF HEAVY FERMIONS IN CECU2SI2 AND CEAL3. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 63-4 . pp. 254-256. ISSN 0304-8853.

UNSPECIFIED (1998) Blow spun strontium zirconate fibres produced from a sol-gel precursor. JOURNAL OF MATERIALS SCIENCE, 33 (13). pp. 3229-3232. ISSN 0022-2461.

UNSPECIFIED (2003) Buckling characteristics of pultruded glass fibre reinforced plastic columns under moment gradient. THIN-WALLED STRUCTURES, 41 (7). pp. 619-638. doi:10.1016/S0263-8231(03)00008-9 ISSN 0263-8231.

UNSPECIFIED (2004) C-1 C60F16O: A fluorofullerene ether having exceptionally long chromatographic retention. FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES, 12 (4). pp. 753-764. doi:10.1081/FST-200032886 ISSN 1536-383X.

UNSPECIFIED (1994) CALIBRATION OF SAFETY FACTORS GAMMA-M FOR COMPOSITE STEEL AND CONCRETE BEAMS IN BENDING. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 104 (2). pp. 193-203. ISSN 0965-0911.

UNSPECIFIED (1994) A CALORIMETER FOR ULTRASOUND TOTAL POWER MEASUREMENTS. MEASUREMENT SCIENCE & TECHNOLOGY, 5 (12). pp. 1533-1537. ISSN 0957-0233.

UNSPECIFIED (1995) THE CAPACITANCE TRANSDUCER AS A STANDARD ULTRASONIC SOURCE IN SOLIDS. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 97 (3). pp. 1650-1659. ISSN 0001-4966.

UNSPECIFIED (1985) CERAMICS AND GLASSES IN THE SC-SI-AL-O-N SYSTEM. MATERIALS SCIENCE AND ENGINEERING, 71 (1-2). pp. 137-145. ISSN 0025-5416.

UNSPECIFIED (1982) THE CHARACTERIZATION OF HIGH-STRENGTH SURFACE-CRYSTALLIZED GLASSES. JOURNAL OF MATERIALS SCIENCE, 17 (9). pp. 2727-2735. ISSN 0022-2461.

UNSPECIFIED (1993) CHARACTERIZATION OF ROLL-DRAWN POLYPROPYLENE USING OPTICAL DIFFRACTOMETRY. JOURNAL OF MATERIALS SCIENCE, 28 (3). pp. 789-794. ISSN 0022-2461.

UNSPECIFIED (1992) CHARACTERIZATION OF ROLL-DRAWN POLYPROPYLENE USING SHEAR-WAVE BIREFRINGENCE. JOURNAL OF MATERIALS SCIENCE, 27 (9). pp. 2413-2419. ISSN 0022-2461.

UNSPECIFIED (1993) THE CHEMICAL SYNTHESIS AND CRYSTALLIZATION SEQUENCE OF MULLITE. JOURNAL OF NON-CRYSTALLINE SOLIDS, 152 (1). pp. 1-17. ISSN 0022-3093.

UNSPECIFIED (1988) CHOOSING BETTER TOOLING. ENGINEERING, 228 (8). A18-A19. ISSN 0013-7782.

UNSPECIFIED (1994) COMPRESSION STRENGTH OF PULTRUDED FLAT SHEET MATERIAL. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 6 (2). pp. 185-200. ISSN 0899-1561.

UNSPECIFIED (1984) COMPTON PROFILE ANISOTROPY IN NI3GA. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 50 (6). pp. 703-709. ISSN 0141-8610.

UNSPECIFIED (1985) COORDINATION OF SI ATOMS IN SILICON-OXYNITRIDES DETERMINED BY MAGIC-ANGLE-SPINNING NMR. JOURNAL OF MATERIALS SCIENCE LETTERS, 4 (4). pp. 393-395. ISSN 0261-8028.

UNSPECIFIED (1983) CRACKING IN CONCRETE TENSION FLANGES OF COMPOSITE T-BEAMS. STRUCTURAL ENGINEER-PART B, 61 (1). pp. 9-16. ISSN 0039-2553.

UNSPECIFIED (1991) CRYSTAL-FIELD EXCITATIONS IN ELECTRON SUPERCONDUCTORS. BULLETIN OF MATERIALS SCIENCE, 14 (3). pp. 607-611. ISSN 0250-4707.

UNSPECIFIED (1985) CRYSTALLIZATION IN Y-SI-AL-O-N GLASSES. MATERIALS SCIENCE AND ENGINEERING, 71 (1-2). pp. 101-111. ISSN 0025-5416.

UNSPECIFIED (1986) CRYSTALLIZATION OF 3M/4X MG-SI-AL-O-N MELTS. JOURNAL OF MATERIALS SCIENCE, 21 (5). pp. 1647-1653. ISSN 0022-2461.

UNSPECIFIED (1982) THE CRYSTALLIZATION OF GLASSES. JOURNAL OF NON-CRYSTALLINE SOLIDS, 52 (1-3). pp. 67-76. ISSN 0022-3093.

UNSPECIFIED (1989) CRYSTALLIZATION OF ND-SI-AL-O-N GLASSES. MATERIALS LETTERS, 9 (1). pp. 29-32. ISSN 0167-577X.

UNSPECIFIED (2002) Capacitive air-coupled cylindrical transducers for ultrasonic imaging applications. MEASUREMENT SCIENCE & TECHNOLOGY, 13 (5). pp. 758-769. ISSN 0957-0233.

UNSPECIFIED (1996) Capacitive and piezoelectric air-coupled transducers for resonant ultrasonic inspection. ULTRASONICS, 34 (6). pp. 621-627. ISSN 0041-624X.

UNSPECIFIED (2000) A Cartesian cut cell method for incompressible viscous flow. APPLIED MATHEMATICAL MODELLING, 24 (8-9). pp. 591-606. ISSN 0307-904X.

UNSPECIFIED (2003) Cavitation erosion in waters having different surface tensions. WEAR, 254 (1-2). pp. 1-9. ISSN 0043-1648.

UNSPECIFIED (2005) Characterisation of surface properties by a multi-function TPM. MEASUREMENT TECHNOLOGY AND INTELLIGENT INSTRUMENTS VI, 295-296 . pp. 9-14. ISSN 1013-9826.

UNSPECIFIED (2003) Characterisation of the contact patch behaviour of an automobile tyre by physical testing. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 31 (3). pp. 354-376. ISSN 0143-3369.

UNSPECIFIED (2002) Characterization of micromachining processes during KrF excimer laser ablation of TiNi shape memory alloy thin sheets and films. SMART MATERIALS & STRUCTURES, 11 (5). pp. 708-714. ISSN 0964-1726.

UNSPECIFIED (2001) Chemical-state specificity in surface structure determination. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 72 (4). pp. 421-428. ISSN 0947-8396.

UNSPECIFIED (2004) Classification of ear, nose, and throat bacteria using a neural-network-based electronic nose. MRS BULLETIN, 29 (10). pp. 709-713. ISSN 0883-7694.

UNSPECIFIED (2005) Clean wurtzite InN surfaces prepared with atomic hydrogen. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 23 (4). pp. 617-620. doi:10.1116/1.1927108 ISSN 0734-2101.

UNSPECIFIED (1998) Closed form solution to the position workspace of Stewart parallel manipulators. SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 41 (4). pp. 393-403. ISSN 1006-9321.

UNSPECIFIED (1998) Combustion synthesis, powder characteristics and crystal structure of phases in Ce-Pr-O system. JOURNAL OF MATERIALS SCIENCE, 33 (20). pp. 5001-5006. ISSN 0022-2461.

UNSPECIFIED (2003) Compressive strength and hydration of wastepaper sludge ash-ground granulated blastfurnace slag blended pastes. CEMENT AND CONCRETE RESEARCH, 33 (8). pp. 1189-1202. doi:10.1016/S0008-8846(03)00042-5 ISSN 0008-8846.

UNSPECIFIED (2000) Computational approach to localization using global energy minimization. COMPUTERS & STRUCTURES, 78 (4). pp. 529-536. ISSN 0045-7949.

UNSPECIFIED (2003) Computational form-finding of tension membrane structures - Non-finite element approaches: Part 1. Use of cubic splines in finding minimal surface membranes. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 56 (5). pp. 651-668. doi:10.1002/nme.579 ISSN 0029-5981.

UNSPECIFIED (2003) Computational form-finding of tension membrane structures - Non-finite element approaches: Part 2. Triangular mesh discretization and control of mesh distortion in modelling minimal surface membranes. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 56 (5). pp. 669-684. doi:10.1002/nme.580 ISSN 0029-5981.

UNSPECIFIED (2003) Computational form-finding of tension membrane structures - Non-finite element approaches: Part 3. Comparison of mesh constraint methods. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 56 (5). pp. 685-697. doi:10.1002/nme.581 ISSN 0029-5981.

UNSPECIFIED (1998) Computerising the salesforce: the introduction of technical change in a nonunion workforce. NEW TECHNOLOGY WORK AND EMPLOYMENT, 13 (2). pp. 104-115. ISSN 0268-1072.

UNSPECIFIED (2001) Conducting-atomic force microscopy investigation of the local electrical characteristics of a Ti/TiO2/Pt anode. ELECTROCHEMICAL AND SOLID STATE LETTERS, 4 (9). E33-E36. doi:10.1149/1.1388195 ISSN 1099-0062.

UNSPECIFIED (2000) Considerations for the ultrasonic inspection of metal-adhesive bonds using EMATs. JOURNAL OF NONDESTRUCTIVE EVALUATION, 19 (3). pp. 95-103. ISSN 0195-9298.

UNSPECIFIED (1997) Corrosion studies of inorganic sol-gel alumina coatings on 316 stainless steel. JOURNAL OF MATERIALS SCIENCE LETTERS, 16 (20). pp. 1628-1633. ISSN 0261-8028.

UNSPECIFIED (1997) Corrugated webs in plate girders for bridges. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 122 (2). pp. 157-164. ISSN 0965-0911.

UNSPECIFIED (2006) Coupling mechanism of electromagnetic acoustical transducers for ultrasonic generation. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 119 (5 Part 1). pp. 2693-2701. doi:10.1121/1.2184288 ISSN 0001-4966.

UNSPECIFIED (2003) Cracking of continuous composite beams with precast decks. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 59 (2). pp. 201-214. ISSN 0143-974X.

UNSPECIFIED (2002) Creating a low-cost, ultra-clean environment. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 26 (1). pp. 122-127. ISSN 0141-6359.

UNSPECIFIED (1999) Crystal nucleation in P2O5-doped lithium disilicate glasses. JOURNAL OF MATERIALS SCIENCE, 34 (18). pp. 4399-4411. ISSN 0022-2461.

UNSPECIFIED (1999) Crystalline properties of strontium barium niobate thin films produced by pulsed-laser deposition. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 79 (11). pp. 2869-2876. ISSN 0141-8610.

UNSPECIFIED (2002) Crystallisation of hexagonal M ferrites from a stoichiometric sol-gel precursor, without formation of the alpha.-BaFe2O4 intermediate phase. MATERIALS LETTERS, 57 (3). pp. 537-542. ISSN 0167-577X.

UNSPECIFIED (2000) Cyclic stress durability testing of lap shear joints exposed to hot-wet conditions. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 20 (1). pp. 33-38. ISSN 0143-7496.

UNSPECIFIED (1997) Cyclopalladated acac and cp liquid crystals: A comparative study. JOURNAL OF MATERIALS CHEMISTRY, 7 (3). pp. 403-406. ISSN 0959-9428.

UNSPECIFIED (1983) THE DC CONDUCTIVITY OF CHALCOGENIDE FILMS DUE TO THE CORRELATED BARRIER HOPPING MECHANISM. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 47 (4). pp. 437-443. ISSN 0141-8637.

UNSPECIFIED (1995) THE DESIGN AND CHARACTERIZATION OF MICROMACHINED AIR-COUPLED CAPACITANCE TRANSDUCERS. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 42 (1). pp. 42-50. ISSN 0885-3010.

UNSPECIFIED (1982) DESIGN FOR LONGITUDINAL SHEAR IN COMPOSITE L-BEAMS. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 2-RESEARCH AND THEORY, 73 (MAR). pp. 147-170. ISSN 0307-8361.

UNSPECIFIED (1991) DESIGN OF MICRO-HAMMERS FOR ULTRASONIC SOURCE APPLICATIONS. ULTRASONICS, 29 (1). pp. 68-75. ISSN 0041-624X.

UNSPECIFIED (1983) DESIGN STUDIES ON UNBRACED, MULTISTORY STEEL FRAMES. STRUCTURAL ENGINEER-PART B, 61 (2). pp. 29-34. ISSN 0039-2553.

UNSPECIFIED (1995) DETERMINATION OF SQUEEZE FILM DAMPING IN CAPACITANCE-BASED CANTILEVER FORCE PROBES. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 17 (2). pp. 94-100. ISSN 0141-6359.

UNSPECIFIED (1989) DETERMINATION OF THE ADSORPTION SITE OF C, N, AND O ON NI(100) AND CU(100) USING PHOTOELECTRON DIFFRACTION. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 7 (3 Part 2). pp. 1926-1930. ISSN 0734-2101.

UNSPECIFIED (1993) DEVELOPMENT OF NOVEL PIEZOELECTRIC ULTRASONIC TRANSDUCERS FOR COUPLANT-FREE NONDESTRUCTIVE TESTING. BRITISH JOURNAL OF NON-DESTRUCTIVE TESTING, 35 (12). pp. 705-709. ISSN 0007-1137.

UNSPECIFIED (1990) THE DIELECTRIC RESPONSE OF A COMMERCIAL POLYBUTYLENE TEREPHTHALATE. JOURNAL OF MATERIALS SCIENCE, 25 (1B). pp. 477-481. ISSN 0022-2461.

UNSPECIFIED (1991) THE DIELECTRIC-PROPERTIES OF GLASS-CERAMIC-ON-METAL SUBSTRATES FOR MICROELECTRONICS PACKAGING. JOURNAL OF MATERIALS SCIENCE, 26 (19). pp. 5367-5374. ISSN 0022-2461.

UNSPECIFIED (1992) DIFFUSION CONTROLLED REACTIONS IN AU/PB-SN SOLDER SYSTEM. MATERIALS SCIENCE AND TECHNOLOGY, 8 (9). pp. 817-824. ISSN 0267-0836.

UNSPECIFIED (1989) A DIFFUSION-REACTION MODEL OF ELECTRICAL-CONDUCTION IN TIN OXIDE GAS SENSORS. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 4 (5). pp. 345-350. ISSN 0268-1242.

UNSPECIFIED (1986) DIRECTIONAL COMPTON PROFILE MEASUREMENTS OF ALUMINUM WITH 412 AND 60 KEV RADIATION. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 54 (1). pp. 37-49. ISSN 0141-8637.

UNSPECIFIED (1983) DIRECTIONAL COMPTON PROFILES AND THE ELECTRON-DENSITY DISTRIBUTION IN VANADIUM. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 47 (1). pp. 51-62. ISSN 0141-8637.

UNSPECIFIED (1985) DISAGGREGATE MODE CHOICE MODELS AND THE AGGREGATION ISSUE - SOME EMPIRICAL RESULTS. TRANSPORTATION RESEARCH PART A-POLICY AND PRACTICE, 19 (4). pp. 315-324. ISSN 0965-8564.

UNSPECIFIED (1991) DISTORTIONAL LATERAL BUCKLING OF CONTINUOUS COMPOSITE BEAMS. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 2-RESEARCH AND THEORY, 91 . pp. 131-161. ISSN 0307-8361.

UNSPECIFIED (1993) DRILLING OF FINE APERTURES IN THIN METALLIC FOILS USING A FOCUSED ION-BEAM. VACUUM, 44 (3-4). pp. 361-365. ISSN 0042-207X.

UNSPECIFIED (1991) THE DRIVE FOR HIGHER SPEEDS. ENGINEERING, 231 (9). 21-&. ISSN 0013-7782.

UNSPECIFIED (2006) Damage evolution in center-holed glass/polyester composites under quasi-static loading using time/frequency analysis of acoustic emission monitored waveforms. COMPOSITES SCIENCE AND TECHNOLOGY, 66 (10). pp. 1366-1375. doi:10.1016/j.compscitech.2005.09.011 ISSN 0266-3538.

UNSPECIFIED (2001) Decomposition, shrinkage and evolution with temperature of aligned hexagonal ferrite fibres. ACTA MATERIALIA, 49 (20). pp. 4241-4250. ISSN 1359-6454.

UNSPECIFIED (2004) Deposition of anatase on the surface of activated carbon. SURFACE & COATINGS TECHNOLOGY, 187 (2-3). pp. 284-292. doi:10.1016/j.surfcoat.2004.03.012 ISSN 0257-8972.

UNSPECIFIED (2006) Depth gauging of defects using low frequency wideband Rayleigh waves. ULTRASONICS, 44 (1). pp. 93-98. doi:10.1016/j.ultras.2005.08.005 ISSN 0041-624X.

UNSPECIFIED (1997) Design of a high-resolution programmable current source for coil-magnet actuators in a monolithic x-ray interferometric calibrator. MEASUREMENT SCIENCE & TECHNOLOGY, 8 (7). pp. 804-813. ISSN 0957-0233.

UNSPECIFIED (2005) Design of tension structures: challenges and misconceptions. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-MUNICIPAL ENGINEER, 158 (3). pp. 231-241. ISSN 0965-0903.

UNSPECIFIED (2000) Determination of bond strength in glass fibre reinforced cement using petrography and image analysis. JOURNAL OF MATERIALS SCIENCE, 35 (18). pp. 4653-4659. ISSN 0022-2461.

UNSPECIFIED (2004) Determination of critical load for flange buckling in concentrically loaded pultruded columns. COMPOSITES PART B-ENGINEERING, 35 (1). pp. 35-47. doi:10.1016/j.compositesb.2003.08.006 ISSN 1359-8368.

UNSPECIFIED (2000) Development of a semi-empirical method for obtaining the dynamic Young's modulus in random continuous reinforced glass/epoxy composites. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 19 (4). pp. 292-300. ISSN 0731-6844.

UNSPECIFIED (2004) Development of an automated non-contact ultrasonic texture measurement system for sheet metal. MEASUREMENT SCIENCE & TECHNOLOGY, 15 (7). pp. 1303-1308. doi:10.1088/0957-0233/15/7/011 ISSN 0957-0233.

UNSPECIFIED (1998) Development of electrolytic heat-treatment in aqueous solution. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 84 (1-3). pp. 189-192. ISSN 0924-0136.

UNSPECIFIED (2002) Development of the double RIFT Diaphragm Forming process. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 21 (18). pp. 1629-1635. doi:10.1106/037168402021482 ISSN 0731-6844.

UNSPECIFIED (1998) Devitrification of sodium disilicate glass: a NMR study. JOURNAL OF MATERIALS SCIENCE, 33 (14). pp. 3737-3740. ISSN 0022-2461.

UNSPECIFIED (2005) Diameter and surcharge effects on solute transport across surcharged manholes. JOURNAL OF HYDRAULIC ENGINEERING-ASCE, 131 (4). pp. 312-321. doi:10.1061/(ASCE)0733-9429(2005)131:4(312) ISSN 0733-9429.

UNSPECIFIED (2002) Domain structure of the anti ferromagnetic insulating state in Nd0.5Sr0.5MnO3. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 238 (2-3). pp. 140-144. ISSN 0304-8853.

UNSPECIFIED (2006) Dual EMAT and PEC non-contact probe: applications to defect testing. NDT & E INTERNATIONAL, 39 (1). pp. 45-52. doi:10.1016/j.ndteint.2005.06.001 ISSN 0963-8695.

UNSPECIFIED (2005) Dual-probe methods using pulsed eddy currents and electromagnetic acoustic transducers for NDT inspection. INSIGHT, 47 (6). pp. 341-345. ISSN 1354-2575.

UNSPECIFIED (2005) Durability and simulated ageing of new matrix glass fibre reinforced concrete. CEMENT & CONCRETE COMPOSITES, 27 (9-10). pp. 875-884. doi:10.1016/j.cemconcomp.2005.04.002 ISSN 0958-9465.

UNSPECIFIED (2004) Dynamic threshold mode operation of p-channel Si and strained-SiGe MOSFETs between 10 K and 300 K. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 19 (9). L95-L98. doi:10.1088/0268-1242/19/9/L01 ISSN 0268-1242.

UNSPECIFIED (1995) THE EFFECT OF SOLID-SURFACES ON TURBULENT JET NOISE. JOURNAL OF SOUND AND VIBRATION, 185 (3). pp. 397-413. ISSN 0022-460X.

UNSPECIFIED (1990) THE EFFECTIVENESS OF ANTI-DOWNDRAFT DOMESTIC CHIMNEY POTS IN PREVENTING SMOKE BLOW-BACK. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 34 (2). pp. 147-168. ISSN 0167-6105.

UNSPECIFIED (1988) EFFECTS OF HEAT-TREATMENT AND CU2O CONTENT OF LEAD ALUMINOBORATE GLASSES ON THEIR CONDUCTION MECHANISMS AND MICROHARDNESS. JOURNAL OF NON-CRYSTALLINE SOLIDS, 105 (1-2). pp. 78-90. ISSN 0022-3093.

UNSPECIFIED (1989) THE EFFICIENCY OF NUMERICAL-METHODS FOR THE ANALYSIS OF PRESTRESSED NETS AND PIN-JOINTED FRAME STRUCTURES. COMPUTERS & STRUCTURES, 33 (3). pp. 791-800. ISSN 0045-7949.

UNSPECIFIED (1988) ELASTIC-SCATTERING AND CHARGE-EXCHANGE IN HE+ ION-SCATTERING FROM ALKALI-METAL OVERLAYERS. VACUUM, 38 (4-5). pp. 291-293. ISSN 0042-207X.

UNSPECIFIED (1983) AN ELECTRON-YIELD EXAFS STUDY OF ANODIC-OXIDE AND HYDRATED-OXIDE FILMS ON PURE ALUMINUM. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 48 (5). pp. 665-683. ISSN 0141-8610.

UNSPECIFIED (2001) EN1994 Eurocode 4: Design of composite steel and concrete structures. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CIVIL ENGINEERING, 144 (Sp. Iss. 2). pp. 33-38. ISSN 0965-089X.

UNSPECIFIED (1988) EUROCODE-4. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 1-DESIGN AND CONSTRUCTION, 84 . pp. 787-819. ISSN 0307-8353.

UNSPECIFIED (1990) EVIDENCE OF FERROELASTICITY IN Y-TETRAGONAL ZIRCONIA POLYCRYSTALS. MATERIALS LETTERS, 9 (9). pp. 309-312. ISSN 0167-577X.

UNSPECIFIED (1994) EXPERIMENTAL TESTS OF NEW DIRECT-METHODS FOR ADSORBATE STRUCTURE DETERMINATION USING PHOTOELECTRON DIFFRACTION. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 12 (4 Part 2). pp. 2045-2050. ISSN 0734-2101.

UNSPECIFIED (2003) Effect of HPHT annealing on the photoluminescence of synthetic diamonds grown in the Fe-Ni-C system. DIAMOND AND RELATED MATERIALS, 12 (12). pp. 2147-2168. doi:10.1016/S0925-9635(03)00256-5 ISSN 0925-9635.

UNSPECIFIED (1998) Effect of atomic short-range order on magnetic anisotropy. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 78 (5-6). pp. 611-615. ISSN 0141-8637.

UNSPECIFIED (1998) Effect of cyclic loading on interfacial shear stress in SiC-CAS glass ceramic matrix composite. MATERIALS SCIENCE AND TECHNOLOGY, 14 (4). pp. 283-286. ISSN 0267-0836.

UNSPECIFIED (2002) Effect of fatty alcohol monolayers on the rate of bromine transfer across the water/air interface: Assessment of candidate models using scanning electrochemical microscopy. LANGMUIR, 18 (4). pp. 1218-1224. doi:10.1012/la011051s ISSN 0743-7463.

UNSPECIFIED (2000) Effect of mechanochemical treatment on the synthesis of calcium dialuminate. JOURNAL OF MATERIALS CHEMISTRY, 10 (4). pp. 1019-1023. ISSN 0959-9428.

UNSPECIFIED (2001) Effect of nonionic surfactants on interfacial electron transfer at the liquid/liquid interface. LANGMUIR, 17 (26). pp. 8348-8354. doi:10.1021/la0108499 ISSN 0743-7463.

UNSPECIFIED (1997) Effect of thickness on the optical absorption edge of sputtered vanadium oxide films. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 49 (2). pp. 166-171. ISSN 0921-5107.

UNSPECIFIED (1996) Efficient characterization of surface topography in cylinder bores. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 19 (2-3). pp. 164-174. ISSN 0141-6359.

UNSPECIFIED (2005) Elastic analysis of internally pressurized thick-walled spherical pressure vessels of functionally graded materials. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 82 (5). pp. 347-354. doi:10.1016/j.ijpvp.2004.11.001 ISSN 0308-0161.

UNSPECIFIED (1996) Elastic strain and enhanced light emission in dry etched Si/Si1-xGex quantum dots. JOURNAL OF ELECTRONIC MATERIALS, 25 (2). pp. 287-291. ISSN 0361-5235.

UNSPECIFIED (1998) Electrical transport studies and temperature-programmed oxygen evolution of PrO1.83. JOURNAL OF MATERIALS SCIENCE, 33 (12). pp. 3001-3007. ISSN 0022-2461.

UNSPECIFIED (1996) Enhancement of instrument and machine capabilities. NANOTECHNOLOGY, 7 (1). pp. 47-51. ISSN 0957-4484.

UNSPECIFIED (1997) Environment sensitive impedance spectroscopy and dc conductivity measurements on NiWO4. JOURNAL OF MATERIALS SCIENCE, 32 (2). pp. 353-356. ISSN 0022-2461.

UNSPECIFIED (2002) Error modeling, sensitivity analysis and assembly process of a class of 3-DOF parallel kinematic machines with parallelogram struts. SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 45 (5). pp. 467-476. ISSN 1006-9321.

UNSPECIFIED (1998) Existing rules and new tests for stud shear connectors in troughs of profiled sheeting. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 128 (3). pp. 244-251. ISSN 0965-0911.

UNSPECIFIED (1984) FACTORS INFLUENCING THE CRYSTALLIZATION OF MAGNESIUM SIALON GLASSES. JOURNAL OF MATERIALS SCIENCE LETTERS, 3 (1). pp. 83-87. ISSN 0261-8028.

UNSPECIFIED (1991) FLEXURAL TESTING OF GENERAL MULTILAYERED COMPOSITES. JOURNAL OF COMPOSITE MATERIALS, 25 (9). pp. 1108-1126. ISSN 0021-9983.

UNSPECIFIED (1988) A FULL RANGE ANALYSIS OF REINFORCED-CONCRETE SLABS USING FINITE-ELEMENTS. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 26 (4). pp. 973-985. ISSN 0029-5981.

UNSPECIFIED (1998) Failure modes of fibre reinforced composites: The effects of strain rate and fibre content. JOURNAL OF MATERIALS SCIENCE, 33 (22). pp. 5415-5422. ISSN 0022-2461.

UNSPECIFIED (1999) Fast optimization of mechanical designs using computer aided design computer aided engineering emulation: a case study. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 213 (D1). pp. 27-35. ISSN 0954-4070.

UNSPECIFIED (1997) Field characterization of an air-coupled micromachined ultrasonic capacitance transducer. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 101 (1). pp. 315-322. ISSN 0001-4966.

UNSPECIFIED (2001) Finite element analysis of non-laminated composite pin-loaded straps for civil engineering. JOURNAL OF COMPOSITE MATERIALS, 35 (7). pp. 577-602. ISSN 0021-9983.

UNSPECIFIED (2004) Finite element simulation of a rolling automobile tyre to understand its transient macroscopic behaviour. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 218 (D12). pp. 1393-1408. ISSN 0954-4070.

UNSPECIFIED (1996) Focused ion beam machining and deposition for nanofabrication. VACUUM, 47 (5). pp. 455-462. ISSN 0042-207X.

UNSPECIFIED (1996) Focused ion beam preparation of inclined planes in semiconductor materials. VACUUM, 47 (5). pp. 451-454. ISSN 0042-207X.

UNSPECIFIED (1997) Focussing of ultrasonic waves in air using a micromachined Fresnel zone-plate. ULTRASONICS, 35 (4). pp. 275-285. ISSN 0041-624X.

UNSPECIFIED (2005) Formation of {Cu-6[S2P(OC2H5)(2)](6)} on Cu2S surfaces from aqueous solutions of the KS2P(OC2H5)(2) collector: Scanning electron microscopy and solid-state P-31 cross-polarization/magic angle spinning and static Cu-65 NMR studies. LANGMUIR, 21 (10). pp. 4420-4424. doi:10.1021/la047026e ISSN 0743-7463.

UNSPECIFIED (1999) Four models of design definition: Sequential, design centered, concurrent and dynamic. JOURNAL OF ENGINEERING DESIGN, 10 (1). pp. 25-37. ISSN 0954-4828.

UNSPECIFIED (2001) Fractal or fiction. WEAR, 249 (5-6). pp. 345-353. ISSN 0043-1648.

UNSPECIFIED (2000) Fractional step methods for thermo-mechanical damage analyses at transient elevated temperatures. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 48 (5). pp. 761-785. ISSN 0029-5981.

UNSPECIFIED (2006) Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions. MATERIALS & DESIGN, 27 (3). pp. 200-208. doi:10.1016/j.matdes.2004.10.014 ISSN 0261-3069.

UNSPECIFIED (2006) Functionalization and photoelectrochemical characterization of poly [3-3 '(vinylcarbazole)] multi-walled carbon nanotube (PVK-MWNT) Langmuir-Schaefer films. NANOTECHNOLOGY, 17 (3). pp. 699-705. doi:10.1088/0957-4484/17/3/014 ISSN 0957-4484.

UNSPECIFIED (2000) Fuzzy modelling approach to the prediction of journey parameters for hybrid electric vehicle control. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 214 (D8). pp. 875-885. ISSN 0954-4070.

UNSPECIFIED (1995) GENETIC SEARCH METHODS FOR ASSESSING GEOMETRIC TOLERANCES. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 122 (1-2). pp. 193-204. ISSN 0045-7825.

UNSPECIFIED (1985) GEOMETRICAL AND ELECTRONIC-STRUCTURE OF MULTIPLE SURFACE PHASES - IODINE ON NI(100). Surface Science, 22-3 (MAY). pp. 459-468. ISSN 0169-4332.

UNSPECIFIED (2003) Gas jets as ultrasonic waveguides. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 114 (3). pp. 1254-1265. doi:10.1121/1.1596169 ISSN 0001-4966.

UNSPECIFIED (1999) Gas-coupled ultrasonic capacitance transducers at high pressure. INSIGHT, 41 (2). pp. 80-86. ISSN 1354-2575.

UNSPECIFIED (1999) The Ge-O-Ge bond angle distribution in GeO2 glass: a NMR determination. JOURNAL OF NON-CRYSTALLINE SOLIDS, 246 (3). pp. 159-168. ISSN 0022-3093.

UNSPECIFIED (1996) Giant magnetoresistance in granular cobalt copper thin films prepared by pulsed laser ablation deposition. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 159 (1-2). pp. 269-281. ISSN 0304-8853.

UNSPECIFIED (1983) THE HALL-MOBILITY OF CARRIERS HOPPING IN AN IMPURITY BAND .3. NUMERICAL RESULTS AND ANALYSIS FOR ENERGY-DEPENDENT AND ENERGY-INDEPENDENT MODELS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 48 (6). pp. 551-560. ISSN 0141-8637.

UNSPECIFIED (1991) HIGH-ENERGY CRYSTAL-FIELD EXCITATIONS IN PRXY1-XBA2CU3O7-DELTA. BULLETIN OF MATERIALS SCIENCE, 14 (3). pp. 613-617. ISSN 0250-4707.

UNSPECIFIED (1989) HIGH-ORDER ANALYSIS OF GENERALLY SYMMETRICAL LAMINATED PLATES UNDER TRANSVERSE LOADING. COMPOSITE STRUCTURES, 12 (3). pp. 211-237. ISSN 0263-8223.

UNSPECIFIED (1988) HIGH-POWER OPTICAL FIBER DELIVERY SYSTEM FOR THE LASER GENERATION OF ULTRASOUND. ULTRASONICS, 26 (6). pp. 307-310. ISSN 0041-624X.

UNSPECIFIED (1994) HIGH-TEMPERATURE PULSED PHOTOACOUSTIC STUDIES OF SURFACE-WAVES ON SOLIDS. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 95 (5 Part 1). pp. 2517-2524. ISSN 0001-4966.

UNSPECIFIED (1995) HOPPING CONDUCTION AND POSSIBLE COULOMB GAP EFFECTS IN MANGANESE AND ZINC FERROUS FERRITE. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 71 (1). pp. 23-39. ISSN 0141-8637.

UNSPECIFIED (1994) HUMAN-RESOURCES AND INDUSTRIAL-DEVELOPMENT - NEW SOCIAL ROLES. INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 9 (3-4). pp. 287-296. ISSN 0267-5730.

UNSPECIFIED (1993) THE HYDROELASTIC STABILITY OF 3-DIMENSIONAL DISTURBANCES OF A FINITE COMPLIANT WALL. JOURNAL OF SOUND AND VIBRATION, 165 (3). pp. 527-552. ISSN 0022-460X.

UNSPECIFIED (2001) Halide removal from BaM (BaFe12O9) and SrM (SrFe12O19) ferrite fibers via a steaming process. JOURNAL OF MATERIALS RESEARCH, 16 (11). pp. 3162-3169. ISSN 0884-2914.

UNSPECIFIED (2005) Halo implant in pseudomorphic SiGe channel p-MOSFET devices to reduce short channel effect. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 20 (8). pp. 673-676. doi:10.1088/0268-1242/20/8/004 ISSN 0268-1242.

UNSPECIFIED (2001) High accuracy non-contact ultrasonic thickness gauging of aluminium sheet using electromagnetic acoustic transducers. ULTRASONICS, 39 (6). pp. 445-453. ISSN 0041-624X.

UNSPECIFIED (2004) High conductance Ge p-channel heterostructures realized by hybrid epitaxial growth. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 19 (10). L106-L109. ISSN 0268-1242.

UNSPECIFIED (2000) High strain rate characterisation of a glass/epoxy composite. JOURNAL OF COMPOSITES TECHNOLOGY & RESEARCH, 22 (1). pp. 3-11. ISSN 0884-6804.

UNSPECIFIED (2002) High-resolution electrochemical, electrical, and structural characterization of a dimensionally stable Ti/TiO2/Pt electrode. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 149 (7). B306-B313. doi:10.1149/1.1479158 ISSN 0013-4651.

UNSPECIFIED (2003) High-resolution, air-coupled ultrasonic imaging of thin materials. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 50 (11). pp. 1516-1524. ISSN 0885-3010.

UNSPECIFIED (2000) High-temperature thickness gauging using a highly deformable dry couplant material. INSIGHT, 42 (11). pp. 734-736. ISSN 1354-2575.

UNSPECIFIED (2001) Homogeneity of lanthanide doped ceria nanocrystal dispersions using high-resolution transmission electron microscopy. JOURNAL OF NANOPARTICLE RESEARCH, 3 (5-6). pp. 433-441. ISSN 1388-0764.

UNSPECIFIED (2001) Hot platen brazing to produce laminated steel tooling. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 110 (2). pp. 206-210. ISSN 0924-0136.

UNSPECIFIED (2005) Humidity and aggregate content correction factors for air-coupled ultrasonic evaluation of concrete. ULTRASONICS, 43 (4). pp. 211-217. doi:10.1016/j.ultras.2004.07.003 ISSN 0041-624X.

UNSPECIFIED (1995) IMAGING THE ACTION OF FLUID-FLOW BLOCKING-AGENTS ON DENTINAL SURFACES USING A SCANNING ELECTROCHEMICAL MICROSCOPE. LANGMUIR, 11 (10). pp. 3959-3963. ISSN 0743-7463.

UNSPECIFIED (1992) IMMERSION TOMOGRAPHY USING RAYLEIGH AND LAMB WAVES. ULTRASONICS, 30 (4). pp. 245-254. ISSN 0041-624X.

UNSPECIFIED (1987) INELASTIC BUCKLING OF COMPOSITE BRIDGE GIRDERS NEAR INTERNAL SUPPORTS. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 2-RESEARCH AND THEORY, 83 . pp. 143-159. ISSN 0307-8361.

UNSPECIFIED (1990) THE INFLUENCE OF POLYMER LATEX MODIFIERS ON THE PROPERTIES OF CONCRETE. COMPOSITES, 21 (6). pp. 487-494. ISSN 0010-4361.

UNSPECIFIED (1982) THE INFLUENCE OF THE NOMINAL CONTACT AREA PLANFORM ON FRICTION FORCE. WEAR, 83 (2). pp. 303-309. ISSN 0043-1648.

UNSPECIFIED (1995) INHIBITION OF INTERMEDIATE TEMPERATURE DEGRADATION OF CALCIUM ALUMINOSILICATE/NICALON BY HIGH-TEMPERATURE PRETREATMENT. JOURNAL OF MATERIALS SCIENCE LETTERS, 14 (17). pp. 1223-1226. ISSN 0261-8028.

UNSPECIFIED (1990) AN INTEGRATED OPTICAL FIBER - EMAT DEVICE FOR APPLICATIONS IN ULTRASONIC NDT. BRITISH JOURNAL OF NON-DESTRUCTIVE TESTING, 32 (2). pp. 76-78. ISSN 0007-1137.

UNSPECIFIED (1982) INTERACTION OF SODIUM WITH SIMPLE GLASSES .1. VITREOUS-SILICA. JOURNAL OF MATERIALS SCIENCE, 17 (9). pp. 2715-2726. ISSN 0022-2461.

UNSPECIFIED (1984) INTERACTION OF SODIUM WITH SIMPLE GLASSES .2. NA2O-SIO2 AND NA2O-AL2O3-SIO2. JOURNAL OF MATERIALS SCIENCE, 19 (3). pp. 881-889. ISSN 0022-2461.

UNSPECIFIED (1990) INTERFACE MICROSTRUCTURE AND MATRIX CRYSTALLIZATION IN SIC-BOROSILICATE (PYREX) COMPOSITES. MATERIALS LETTERS, 10 (4-5). pp. 161-164. ISSN 0167-577X.

UNSPECIFIED (1989) INTERFACE STRUCTURE AND MATRIX CRYSTALLIZATION IN SIC (NICALON)-PYREX COMPOSITES. JOURNAL OF MATERIALS SCIENCE LETTERS, 8 (5). pp. 571-572. ISSN 0261-8028.

UNSPECIFIED (1985) INTERFACIAL REACTION-MECHANISMS IN SYALON CERAMIC BONDING. MATERIALS SCIENCE AND ENGINEERING, 71 (1-2). pp. 113-122. ISSN 0025-5416.

UNSPECIFIED (1983) INVERSE PHOTOEMISSION. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1 (2). pp. 1104-1110. ISSN 0734-2101.

UNSPECIFIED (1992) INVESTIGATION OF THE LOCAL-STRUCTURE AROUND IRON DISPERSED IN VINYL-CHLORIDE VINYLIDENE-CHLORIDE (VC-VDC) COPOLYMER COATINGS ON MILD-STEEL USING GLANCING-ANGLE X-RAY ABSORPTION-SPECTROSCOPY. JOURNAL OF MATERIALS CHEMISTRY, 2 (1). pp. 49-55. ISSN 0959-9428.

UNSPECIFIED (1987) ION-BEAM MACHINING OF MICROMECHANICAL COMPONENTS. F&M-FEINWERKTECHNIK & MESSTECHNIK, 95 (4). pp. 243-244. ISSN 0340-1952.

UNSPECIFIED (2004) Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event. COMPOSITES SCIENCE AND TECHNOLOGY, 64 (12). pp. 1819-1827. doi:10.1016/j.compscitech.2004.01.008 ISSN 0266-3538.

UNSPECIFIED (2003) Image texture analysis of sonograms in chronic inflammations of thyroid gland. ULTRASOUND IN MEDICINE AND BIOLOGY, 29 (11). pp. 1531-1543. doi:10.1016/S0301-5629(03)01049-4 ISSN 0301-5629.

UNSPECIFIED (2003) Implementing evaluation of the measurement process in an automotive manufacturer: a case study. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 19 (5). pp. 397-410. doi:10.1002/qre.533 ISSN 0748-8017.

UNSPECIFIED (1999) Improvements to dry-coupled ultrasound for wall thickness and weld inspection. INSIGHT, 41 (11). pp. 704-706. ISSN 1354-2575.

UNSPECIFIED (2000) Indication of velocity overshoot in strained Si0.8Ge0.2 p-channel MOSFETs. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 15 (6). pp. 573-578. ISSN 0268-1242.

UNSPECIFIED (1997) Indirect methods for assessing road friendliness of lorry suspensions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 211 (4). pp. 243-256. ISSN 0954-4070.

UNSPECIFIED (2003) Industrially viable non-contact ultrasound. INSIGHT, 45 (3). pp. 211-217. ISSN 1354-2575.

UNSPECIFIED (2002) Influence of modal coupling on the buckling of concentrically loaded pultruded fibre-reinforced plastic columns. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 216 (L2). pp. 133-144. ISSN 1464-4207.

UNSPECIFIED (1996) Influence of the surface height distribution on the total integrated scatter (TIS) formula. NANOTECHNOLOGY, 7 (1). pp. 43-46. ISSN 0957-4484.

UNSPECIFIED (2001) Influences of oxide phases on the coercivity of mechanically alloyed multicomponent Fe-based amorphous alloys. SCRIPTA MATERIALIA, 44 (12). pp. 2729-2734. ISSN 1359-6462.

UNSPECIFIED (2000) Inhomogeneities in acid-catalyzed titania-silica and zirconia-silica xerogels as revealed by small-angle x-ray scattering. JOURNAL OF MATERIALS RESEARCH, 15 (9). pp. 1998-2005. ISSN 0884-2914.

UNSPECIFIED (1996) Inorganic aluminium precursors in the synthesis of mullite - An investigation. JOURNAL OF MATERIALS SCIENCE, 31 (20). pp. 5551-5554. ISSN 0022-2461.

UNSPECIFIED (1996) Inorganic sol gel synthesis of zirconium titanate fibres. JOURNAL OF MATERIALS SCIENCE, 31 (21). pp. 5583-5586. ISSN 0022-2461.

UNSPECIFIED (2004) Inspection of rail track head surfaces using electromagnetic acoustic transducers (EMATs). INSIGHT, 46 (6). pp. 326-330. ISSN 1354-2575.

UNSPECIFIED (1997) Intense visible photoluminescence from molecular beam epitaxy porous Si1-xGex grown on Si. THIN SOLID FILMS, 305 (1-2). pp. 274-279. ISSN 0040-6090.

UNSPECIFIED (1999) Inter-organizational systems planning: learning from current practices. INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 17 (1-2). pp. 129-144. ISSN 0267-5730.

UNSPECIFIED (1997) Interactive prototyping - A challenge for computer based design. RESEARCH IN ENGINEERING DESIGN-THEORY APPLICATIONS AND CONCURRENT ENGINEERING, 9 (1). pp. 10-19. ISSN 0934-9839.

UNSPECIFIED (2004) Interpretation of climatic temperature variations for accelerated ageing models. JOURNAL OF MATERIALS SCIENCE, 39 (1). pp. 113-118. ISSN 0022-2461.

UNSPECIFIED (2004) Investigation of Al-O-Al sites in an Na-aluminosilicate glass. BULLETIN OF MATERIALS SCIENCE, 27 (3). pp. 269-272. ISSN 0250-4707.

UNSPECIFIED (2003) Investigation of a resonance microgenerator. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 13 (2). pp. 209-216. ISSN 0960-1317.

UNSPECIFIED (2005) Investigation of the injection velocity of holes in strained Si pMOSFETs. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 20 (5). L20-L22. doi:10.1088/0268-1242/20/5/L02 ISSN 0268-1242.

UNSPECIFIED (2004) Investigation of the kinetics and mechanism of acid chloride hydrolysis in an oil/water system using microelectrochemical measurements at expanding droplets (MEMED). LANGMUIR, 20 (5). pp. 1864-1870. doi:10.1021/la0355951 ISSN 0743-7463.

UNSPECIFIED (2000) Joining techniques for aluminium spaceframes used in automobiles Part I - solid and liquid phase welding. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 99 (1-3). pp. 62-71. ISSN 0924-0136.

UNSPECIFIED (2000) Joining techniques for aluminium spaceframes used in automobiles Part II - adhesive bonding and mechanical fasteners. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 99 (1-3). pp. 72-79. ISSN 0924-0136.

UNSPECIFIED (2003) Kinematic calibration of a class of parallel kinematic machines(PKM) with fewer than six degrees of freedom. SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 46 (5). pp. 515-526. doi:10.1360/02ye0277 ISSN 1006-9321.

UNSPECIFIED (2002) Kinetics of IrCl62- ion transfer across the water/1,2-dichloroethane interface and the effect of a phospholipid monolayer. LANGMUIR, 18 (6). pp. 2313-2318. doi:10.1021/la011511h ISSN 0743-7463.

UNSPECIFIED (1999) Kinetics of wet oxidation at 1000 degrees C of Si0.5Ge0.5 relaxed alloy. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 14 (5). pp. 484-487. ISSN 0268-1242.

UNSPECIFIED (1994) LAMB WAVE TOMOGRAPHY OF ADVANCED COMPOSITE LAMINATES CONTAINING DAMAGE. ULTRASONICS, 32 (2). pp. 83-89. ISSN 0041-624X.

UNSPECIFIED (1993) LAMB-WAVE TOMOGRAPHY USING NONCONTACT TRANSDUCTION. ULTRASONICS, 31 (2). pp. 97-103. ISSN 0041-624X.

UNSPECIFIED (1989) A LASER STUDY OF TRANSIENT LAMB WAVES IN THIN MATERIALS. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 85 (4). pp. 1441-1448. ISSN 0001-4966.

UNSPECIFIED (1991) LASER-GENERATED SURFACE-WAVES ON PLATES OF VARYING THICKNESS. BRITISH JOURNAL OF NON-DESTRUCTIVE TESTING, 33 (4). pp. 177-182. ISSN 0007-1137.

UNSPECIFIED (1992) LATERAL-TORSIONAL BUCKLING OF A PULTRUDED I-BEAM. COMPOSITES, 23 (2). pp. 81-92. ISSN 0010-4361.

UNSPECIFIED (1992) LATERAL-TORSIONAL BUCKLING OF THIN-WALLED COMPOSITE I-BEAMS BY THE FINITE-DIFFERENCE METHOD. COMPOSITES ENGINEERING, 2 (2). pp. 91-104. ISSN 0961-9526.

UNSPECIFIED (1994) THE LEARNING OF MOTOR-SKILLS - SPORTS SCIENCE AND ERGONOMICS PERSPECTIVES. ERGONOMICS, 37 (1). pp. 5-16. ISSN 0014-0139.

UNSPECIFIED (1983) LEED EVALUATION OF 3 MODELS OF THE SI[100] SURFACE. VACUUM, 33 (10-1). pp. 627-632. ISSN 0042-207X.

UNSPECIFIED (1989) LOCAL SCATTERING PROBES OF SURFACE-STRUCTURE. VACUUM, 39 (7-8). pp. 621-625. ISSN 0042-207X.

UNSPECIFIED (1994) LOW-TEMPERATURE SYNTHESIS AND CHARACTERIZATION OF CRYSTALLINE ZIRCONIUM TITANATE POWDER. MATERIALS LETTERS, 18 (5-6). pp. 247-250. ISSN 0167-577X.

UNSPECIFIED (1991) LUMINESCENCE IN THE KTIOPO4 STRUCTURE FIELD - KTIOASO4 AND KSNOPO4. MATERIALS CHEMISTRY AND PHYSICS, 27 (3). pp. 279-285. ISSN 0254-0584.

UNSPECIFIED (2000) Laminated steel tooling in the aerospace industry. MATERIALS & DESIGN, 21 (4). pp. 403-408. ISSN 0261-3069.

UNSPECIFIED (2005) Langmuir-Schaefer films of Nafion with incorporated TiO2 nanoparticles. LANGMUIR, 21 (1). pp. 172-177. doi:10.1021/la048837l ISSN 0743-7463.

UNSPECIFIED (1996) Laser-generated ultrasonic guided waves in fiber-reinforced plates - Theory and experiment. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 43 (5). pp. 870-880. ISSN 0885-3010.

UNSPECIFIED (1998) Lightweight tension membranes - an overview. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CIVIL ENGINEERING, 126 (4). pp. 171-181. ISSN 0965-089X.

UNSPECIFIED (1999) Linear and unanticipated second-order nonlinear optical properties of benzylic amide [2]Catenane thin films: Evidence of partial rotation of the interlocked molecular rings in the solid state. ADVANCED MATERIALS, 11 (15). 1303-+. ISSN 0935-9648.

UNSPECIFIED (1997) Load-dependent behavior in PTFE-glass slideways. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 20 (3). pp. 153-160. ISSN 0141-6359.

UNSPECIFIED (2004) Local cobalt electrodeposition using the scanning electrochemical microscope. ELECTROCHEMICAL AND SOLID STATE LETTERS, 7 (6). C71-C74. doi:10.1149/1.1697906 ISSN 1099-0062.

UNSPECIFIED (1997) Local flange buckling in plate girders with corrugated webs. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 122 (2). pp. 148-156. ISSN 0965-0911.

UNSPECIFIED (1996) Long-range magnetic ordering in the Kondo lattice CeCuGa3. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 159 (1-2). pp. 223-226. ISSN 0304-8853.

UNSPECIFIED (2001) Low temperature preparation of orthoferrite thin-films by an inorganic sol-gel process. THIN SOLID FILMS, 385 (1-2). pp. 230-233. ISSN 0040-6090.

UNSPECIFIED (1996) Low-temperature decomposition of hydrated transition metal chlorides on hydrous gel substrates. JOURNAL OF MATERIALS SCIENCE, 31 (17). pp. 4479-4482. ISSN 0022-2461.

UNSPECIFIED (1999) Low-temperature formation of alpha alumina powders from carboxylate and mixed carboxylate precursors. MATERIALS LETTERS, 39 (3). pp. 188-195. ISSN 0167-577X.

UNSPECIFIED (1996) Low-temperature synthesis and characterization of ceria-based oxide ion conductors. JOURNAL OF MATERIALS SCIENCE, 31 (19). pp. 5005-5007. ISSN 0022-2461.

UNSPECIFIED (1982) MACHINED SURFACES - FINAL TEXTURE AND UNDERLYING STRUCTURE. WEAR, 83 (2). pp. 233-240. ISSN 0043-1648.

UNSPECIFIED (1994) MACHINING OF ADVANCED ENGINEERING MATERIALS USING TRADITIONAL AND LASER TECHNIQUES. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 42 (4). pp. 391-400. ISSN 0924-0136.

UNSPECIFIED (1989) MAGIC ANGLE SPINNING NMR OF ALKALI PHOSPHO ALUMINO SILICATE-GLASSES. JOURNAL OF NON-CRYSTALLINE SOLIDS, 112 (1-3). pp. 111-119. ISSN 0022-3093.

UNSPECIFIED (1986) MAGNETIC EXCITATIONS OF ORDERED PD3FE AND DISORDERED PDFE ALLOYS. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 54-7 (Part 3). pp. 1171-1172. ISSN 0304-8853.

UNSPECIFIED (1992) MAGNETIC-FIELD-INDUCED METAL-INSULATOR-TRANSITION IN SI-B-DELTA LAYERS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 66 (3). pp. 379-389. ISSN 0141-8637.

UNSPECIFIED (1993) MAGNETIC-X-RAY SCATTERING FROM SAMARIUM. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 127 (1-2). pp. 145-150. ISSN 0304-8853.

UNSPECIFIED (1994) MAGNETOSTATIC ENERGY CALCULATIONS FOR DOMAINS IN RECTANGULAR SLABS. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 136 (3). pp. 284-286. ISSN 0304-8853.

UNSPECIFIED (1991) MANAGING TECHNOLOGICAL CHANGES - OPPORTUNITIES AND PITFALLS. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 12 (5-6). pp. 469-477. ISSN 0143-3369.

UNSPECIFIED (1993) MANUFACTURE AND COMPRESSION PROPERTIES OF SYNTACTIC FOAMS. COMPOSITES, 24 (7). pp. 565-571. ISSN 0010-4361.

UNSPECIFIED (2002) A MAS NMR structural study of cadmium phosphate glasses. JOURNAL OF NON-CRYSTALLINE SOLIDS, 298 (1). pp. 32-42. ISSN 0022-3093.

UNSPECIFIED (1988) AN MAS NMR-STUDY OF NETWORK - CATION COORDINATION IN PHOSPHOSILICATE GLASSES. JOURNAL OF NON-CRYSTALLINE SOLIDS, 106 (1-3). pp. 403-407. ISSN 0022-3093.

UNSPECIFIED (1990) A MAS-NMR INVESTIGATION OF LITHIUM SILICATE-GLASSES AND GLASS-CERAMICS. JOURNAL OF NON-CRYSTALLINE SOLIDS, 116 (2-3). pp. 148-160. ISSN 0022-3093.

UNSPECIFIED (1989) MEASUREMENTS WITH A THICK CONICAL PIEZOELECTRIC TRANSDUCER. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 85 (6). pp. 2417-2422. ISSN 0001-4966.

UNSPECIFIED (1987) A METHOD FOR IMPROVING DIGITAL IMAGE COMPARISON IN X-RAY TOPOGRAPHS. MATERIALS LETTERS, 5 (5-6). pp. 227-231. ISSN 0167-577X.

UNSPECIFIED (1995) METHOD FOR SETTING FIDELITY CRITERIA FOR SURFACE-MEASURING INSTRUMENTS. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 17 (4). pp. 274-280. ISSN 0141-6359.

UNSPECIFIED (1994) MICROMACHINING OF SEMICONDUCTOR-MATERIALS BY FOCUSED ION-BEAMS. VACUUM, 45 (12). pp. 1169-1173. ISSN 0042-207X.

UNSPECIFIED (1982) A MICROSCOPIC STUDY OF ELASTIC-DEFORMATION IN AN OXIDE LAYER ON A PLASTICALLY DEFORMED METAL. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 46 (3). pp. 521-530. ISSN 0141-8610.

UNSPECIFIED (1990) MICROSTRUCTURAL ANALYSIS OF A CUBIC BORON-NITRIDE CERAMIC. MATERIALS LETTERS, 9 (2-3). pp. 83-86. ISSN 0167-577X.

UNSPECIFIED (1991) MICROSTRUCTURAL CHARACTERIZATION OF INTERFACES IN FIBER-REINFORCED CERAMICS. COMPOSITES SCIENCE AND TECHNOLOGY, 42 (1-3). pp. 221-249. ISSN 0266-3538.

UNSPECIFIED (1985) MICROSTRUCTURE AND PROPERTIES OF MGO-ZNO2-SIO2 ALKALI-FREE GLASS-CERAMICS. JOURNAL OF MATERIALS SCIENCE, 20 (10). pp. 3428-3438. ISSN 0022-2461.

UNSPECIFIED (1994) MICROSTRUCTURE, FLUX-PINNING AND CRITICAL-CURRENT DENSITY IN YBA2CU3O7-DELTA FILMS GROWN BY LASER-ABLATION. THIN SOLID FILMS, 245 (1-2). pp. 186-190. ISSN 0040-6090.

UNSPECIFIED (1988) MOISTURE-ENHANCED STRENGTH DEGRADATION OF A SUPERCONDUCTING CERAMIC. JOURNAL OF MATERIALS SCIENCE LETTERS, 7 (9). pp. 906-908. ISSN 0261-8028.

UNSPECIFIED (1997) Magnetic Co2Y ferrite, Ba2Co2Fe12O22 fibres produced by a blow spun process. JOURNAL OF MATERIALS SCIENCE, 32 (2). pp. 365-368. ISSN 0022-2461.

UNSPECIFIED (2001) Magnetic properties of nanocrystalline CoFe2O4 powders prepared at room temperature: Variation with crystallite size. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 232 (1-2). pp. 71-83. ISSN 0304-8853.

UNSPECIFIED (2003) Magnetic properties of praseodymium ions in Na2O-Pr2O3-SiO2 glasses. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 260 (1-2). pp. 60-69. ISSN 0304-8853.

UNSPECIFIED (2005) Magnetism in surfaces: an orbital-resolved study. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 285 (1-2). pp. 210-223. doi:10.1016/j.jmmm.2004.07.043 ISSN 0304-8853.

UNSPECIFIED (1995) Measurement and prediction of time domain waveforms in fiber-reinforced laminates. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 98 (6). pp. 3383-3390. ISSN 0001-4966.

UNSPECIFIED (1996) Measurement of elastic constants in composite materials using air-coupled ultrasonic bulk waves. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 99 (4 Part 1). pp. 2116-2123. ISSN 0001-4966.

UNSPECIFIED (1998) Mechanism of impact ionization enhancement in GaAs p-i-n diodes under high illumination conditions. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 13 (2). pp. 190-193. ISSN 0268-1242.

UNSPECIFIED (2000) Mechanochemical synthesis and sintering behaviour of magnesium aluminate spinel. JOURNAL OF MATERIALS SCIENCE, 35 (22). pp. 5529-5535. ISSN 0022-2461.

UNSPECIFIED (2005) Melting of stoichiometric and hyperstoichiometric uranium dioxide. JOURNAL OF NUCLEAR MATERIALS, 342 (1-3). pp. 148-163. doi:10.1016/j.nucmat.2005.04.002 ISSN 0022-3115.

UNSPECIFIED (1998) Metastable phase formation in the early stage crystallisation of lithium disilicate glass. JOURNAL OF NON-CRYSTALLINE SOLIDS, 224 (1). pp. 1-16. ISSN 0022-3093.

UNSPECIFIED (1996) Metrological x-ray interferometry in the micrometre region. NANOTECHNOLOGY, 7 (1). pp. 1-12. ISSN 0957-4484.

UNSPECIFIED (1999) Microelectrochemical measurements at expanding droplets (MEMED): Mass-transport characterization and assessment of amperometric and potentiometric electrodes as concentration boundary layer probes of liquid/liquid interfaces. LANGMUIR, 15 (21). pp. 7361-7371. ISSN 0743-7463.

UNSPECIFIED (2001) Microelectrochemical measurements at expanding droplets: Effect of surfactant adsorption on electron transfer kinetics at liquid/liquid interfaces. LANGMUIR, 17 (3). pp. 821-827. doi:10.1021/la001113z ISSN 0743-7463.

UNSPECIFIED (1997) Microelectronics in the clothing industry: Firm strategy and the skills debate. NEW TECHNOLOGY WORK AND EMPLOYMENT, 12 (1). pp. 36-47. ISSN 0268-1072.

UNSPECIFIED (2003) Microfabrication of Al2O3/ZrO2 bi-phase ceramics with continuous fibrillar microstructure by co-extrusion. JOURNAL OF MATERIALS SCIENCE LETTERS, 22 (5). pp. 357-361. ISSN 0261-8028.

UNSPECIFIED (1998) Micromachined ultrasonic capacitance transducers for immersion applications. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 45 (2). pp. 367-375. ISSN 0885-3010.

UNSPECIFIED (2000) Microstructural observations in new matrix glass fibre reinforced cement. CEMENT AND CONCRETE RESEARCH, 30 (11). pp. 1747-1753. ISSN 0008-8846.

UNSPECIFIED (2003) Microstructurally controlled mullite ceramics produced from monophasic and diphasic sol-derived pastes using extrusion. JOURNAL OF MATERIALS SCIENCE, 38 (4). pp. 767-777. ISSN 0022-2461.

UNSPECIFIED (1996) Microstructure and crystallisation behaviour of sol-gel derived 1/2SrO-1/2BaO-A1(2)O(3)-2SiO(2) glass-ceramic. JOURNAL OF NON-CRYSTALLINE SOLIDS, 195 (1-2). pp. 28-37. ISSN 0022-3093.

UNSPECIFIED (1998) Microstructure and fracture toughness of Si3N4 based ceramics subjected to pre-sinter heat treatments. JOURNAL OF MATERIALS SCIENCE LETTERS, 17 (23). pp. 1987-1990. ISSN 0261-8028.

UNSPECIFIED (2004) Modelling ultrasonic generation for Lorentz force EMATs. INSIGHT, 46 (11). pp. 671-673. ISSN 1354-2575.

UNSPECIFIED (1998) Models and design rules for stud shear connectors in troughs of profiled sheeting. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 128 (3). pp. 252-263. ISSN 0965-0911.

UNSPECIFIED (1997) Modulation of crystallinity in sputtered vanadium metal thin films grown on ion exchanged glasses. JOURNAL OF MATERIALS SCIENCE LETTERS, 16 (21). pp. 1705-1708. ISSN 0261-8028.

UNSPECIFIED (1999) Monitoring of binder removal from injection molded ceramics using air-coupled ultrasound at high temperature. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 46 (3). pp. 647-653. ISSN 0885-3010.

UNSPECIFIED (2000) Multi-response optimization in industrial experiments using Taguchi's quality loss function and principal component analysis. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 16 (1). pp. 3-8. ISSN 0748-8017.

UNSPECIFIED (1991) N-15 MAS NMR IN THE YSIALON SYSTEM. MATERIALS LETTERS, 11 (5-7). pp. 195-198. ISSN 0167-577X.

UNSPECIFIED (1995) NEGATIVE THERMAL-EXPANSION AND PHASE-TRANSITIONS IN THE ZRV2-XPXO7 SERIES. CHEMISTRY OF MATERIALS, 7 (2). pp. 412-417. ISSN 0897-4756.

UNSPECIFIED (1992) A NEW DIAGNOSTIC-TOOL FOR THE NONDESTRUCTIVE CHARACTERIZATION OF DAMAGE ACCOMPANYING THE ELECTROMAGNETIC BREAKDOWN OF EPITAXIAL SILICON P-N-JUNCTIONS. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 15 (1). pp. 56-62. ISSN 0921-5107.

UNSPECIFIED (1994) A NEW STRATEGY FOR INSPECTING ROUNDNESS FEATURES. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 16 (4). pp. 283-289. ISSN 0141-6359.

UNSPECIFIED (1989) NEW TECHNOLOGY, COMPETITION AND THE FIRM - A FRAMEWORK FOR RESEARCH. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 10 (4). pp. 453-469. ISSN 0143-3369.

UNSPECIFIED (1985) NITROGEN-CONTENT OF THE INTERGRANULAR GLASS PHASE IN SYALON CERAMICS. JOURNAL OF MATERIALS SCIENCE LETTERS, 4 (2). pp. 241-243. ISSN 0261-8028.

UNSPECIFIED (1984) AN NMR COMPARISON OF SOME ALKALI-ANTIMONY ALLOYS THROUGH THE METAL-NONMETAL TRANSITION. JOURNAL OF NON-CRYSTALLINE SOLIDS, 61-2 (JAN). pp. 53-58. ISSN 0022-3093.

UNSPECIFIED (1988) NMR DETERMINATIONS OF SI-O-SI BOND ANGLE DISTRIBUTIONS IN SILICA. JOURNAL OF NON-CRYSTALLINE SOLIDS, 106 (1-3). pp. 408-412. ISSN 0022-3093.

UNSPECIFIED (1995) NMR INVESTIGATION OF THE STRUCTURE OF SOME BIOACTIVE AND RELATED GLASSES. JOURNAL OF NON-CRYSTALLINE SOLIDS, 188 (3). pp. 207-219. ISSN 0022-3093.

UNSPECIFIED (1991) NMR-STUDIES OF ND2-XCEXCUO4. BULLETIN OF MATERIALS SCIENCE, 14 (3). pp. 619-623. ISSN 0250-4707.

UNSPECIFIED (1994) NMR-STUDIES OF THE LEUCITE ANALOGS X2YSI5O12, WHERE X=K, RB, CS - Y=MG, ZN, CD. PHYSICS AND CHEMISTRY OF MINERALS, 21 (3). pp. 176-190. ISSN 0342-1791.

UNSPECIFIED (1982) NMR-STUDY OF CHANGES IN BONDING AND THE METAL NON-METAL TRANSITION IN LIQUID CESIUM ANTIMONY ALLOYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 46 (6). pp. 595-606. ISSN 0141-8637.

UNSPECIFIED (1986) NMR-STUDY OF ELECTRON LOCALIZATION IN SOME ALKALI-ANTIMONY ALLOYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 53 (3). pp. 247-252. ISSN 0141-8637.

UNSPECIFIED (1991) AN NMR-STUDY OF STRUCTURE AND ORDERING IN SYNTHETIC K2MGSI5O12, A LEUCITE ANALOG. PHYSICS AND CHEMISTRY OF MINERALS, 18 (2). pp. 144-152. ISSN 0342-1791.

UNSPECIFIED (1988) NON-DESTRUCTIVE EXAMINATION WITH A COMPTON SCANNER. BRITISH JOURNAL OF NON-DESTRUCTIVE TESTING, 30 (2). pp. 75-80. ISSN 0007-1137.

UNSPECIFIED (1991) NONCONTACT ULTRASONIC INSPECTION OF DIFFUSION BONDS IN TITANIUM. ULTRASONICS, 29 (4). pp. 294-301. ISSN 0041-624X.

UNSPECIFIED (1995) A NOVEL 8-BIT ULTRASOUND PHASED-ARRAY CONTROLLER FOR HYPERTHERMIA APPLICATIONS. ULTRASONICS, 33 (1). pp. 69-73. ISSN 0041-624X.

UNSPECIFIED (1983) NUMERICAL AND ANALYTICAL CALCULATIONS OF THE HALL-EFFECT, THERMOPOWER, AC AND DC CONDUCTIVITY FOR ENERGY-DEPENDENT HOPPING SYSTEMS. JOURNAL OF NON-CRYSTALLINE SOLIDS, 59-6 (DEC). pp. 45-48. ISSN 0022-3093.

UNSPECIFIED (1990) NUMERICAL MODELING OF THE NONLINEAR STATIC RESPONSE OF CLAD CABLE NET STRUCTURES. COMPUTERS & STRUCTURES, 35 (1). pp. 15-22. ISSN 0045-7949.

UNSPECIFIED (2005) Nanowire probes for high resolution combined scanning electrochemical Microscopy - Atomic force Microscopy. NANO LETTERS, 5 (4). pp. 639-643. doi:10.1021/nl050018d ISSN 1530-6984.

UNSPECIFIED (2002) Nb-substitution and Cs+ ion-exchange in the titanosilicate sitinakite. MICROPOROUS AND MESOPOROUS MATERIALS, 55 (1). pp. 1-13. ISSN 1387-1811.

UNSPECIFIED (1998) Nd-YAG laser machining of SiC fibre borosilicate glass composites. Part I. Optimisation of laser pulse parameters. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 29 (8). pp. 947-954. ISSN 1359-835X.

UNSPECIFIED (1998) Nd-YAG laser machining of SiC fibre borosilicate glass composites. Part II. The effect of process variables. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 29 (8). pp. 955-964. ISSN 1359-835X.

UNSPECIFIED (1999) Neural network correction of ultrasonic C-scan images. ULTRASONICS, 37 (4). pp. 263-272. ISSN 0041-624X.

UNSPECIFIED (2004) Neutron-diffraction study of the magnetic structure of PrCoAl4. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 284 . pp. 97-103. doi:10.1016/j.jmmm.2004.06.023 ISSN 0304-8853.

UNSPECIFIED (1999) New product development success factors in American and British firms. INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 17 (3). pp. 259-280. ISSN 0267-5730.

UNSPECIFIED (1995) Non-contact NDT - Experiment to monitor adhesive cure using electromagnetic acoustic transducers. INSIGHT, 37 (12). pp. 969-973. ISSN 1354-2575.

UNSPECIFIED (1999) Non-destructive banana ripeness determination using a neural network-based electronic nose. MEASUREMENT SCIENCE & TECHNOLOGY, 10 (6). pp. 538-548. ISSN 0957-0233.

UNSPECIFIED (2004) Noncontact ultrasonic diagnostics in concrete: A preliminary investigation. CEMENT AND CONCRETE RESEARCH, 34 (7). pp. 1185-1188. doi:10.1016/j.cemconres.2003.12.012 ISSN 0008-8846.

UNSPECIFIED (2005) Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 52 (2). pp. 280-288. ISSN 0885-3010.

UNSPECIFIED (2002) Nonlinearity for a parallel kinematic machine tool and its application to interpolation accuracy analysis. SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 45 (1). pp. 97-105. ISSN 1006-9321.

UNSPECIFIED (2006) Nosing around. MATERIALS WORLD, 14 (4). pp. 32-33. ISSN 0967-8638.

UNSPECIFIED (1997) Novel aqueous sol-gel preparation and characterization of barium M ferrite, BaFe12O19 fibres. JOURNAL OF MATERIALS SCIENCE, 32 (2). pp. 349-352. ISSN 0022-2461.

UNSPECIFIED (2001) Novel, wide bandwidth, micromachined ultrasonic transducers. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 48 (6). pp. 1495-1507. ISSN 0885-3010.

UNSPECIFIED (1992) ON THE CALCULATION OF ACOUSTIC RADIATION IMPEDANCE OF POLYGONAL-SHAPED APERTURES. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 92 (5). pp. 2961-2963. ISSN 0001-4966.

UNSPECIFIED (1993) ON THE MAGNETOSTATIC ENERGY OF UNIFORMLY MAGNETIZED NEEDLES. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 118 (3). pp. 307-314. ISSN 0304-8853.

UNSPECIFIED (1986) ON THE OCCURRENCE OF MULTIPLY TWINNED PARTICLES IN ELECTRODEPOSITED NICKEL FILMS. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 54 (6). pp. 805-820. ISSN 0141-8610.

UNSPECIFIED (1995) OPTICAL-PROPERTIES OF SI-SI1-XGEX AND SI-GE NANOSTRUCTURES. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 6 (5). pp. 356-362. ISSN 0957-4522.

UNSPECIFIED (1992) THE ORDERING OF THE UNKNOWN BY CAUSING IT TO ORDER ITSELF - REPLY. INTERNATIONAL JOURNAL OF GENERAL SYSTEMS, 21 (2). p. 271. ISSN 0308-1079.

UNSPECIFIED (1997) On the low-temperature mobility of holes in gated oxide Si/SiGe heterostructures. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 12 (9). pp. 1064-1071. ISSN 0268-1242.

UNSPECIFIED (1999) On the role of transition metal elements as structure-stabilising agents in cuprate superconductors. INTERNATIONAL JOURNAL OF INORGANIC MATERIALS, 1 (1). pp. 87-95. ISSN 1466-6049.

UNSPECIFIED (1997) Optical and structural properties of bias sputtered vanadium pentoxide thin films. VACUUM, 48 (10). pp. 879-882. ISSN 0042-207X.

UNSPECIFIED (1996) Optimal structural membranes .1. Formulation of a curved quadrilateral element for surface definition. COMPUTERS & STRUCTURES, 61 (5). pp. 871-883. ISSN 0045-7949.

UNSPECIFIED (1996) Optimal structural membranes .2. Form-finding of prestressed membranes using a curved quadrilateral finite element for surface definition. COMPUTERS & STRUCTURES, 61 (5). pp. 885-895. ISSN 0045-7949.

UNSPECIFIED (2001) Orange peel: who cares? PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 215 (D12). pp. 1241-1244. ISSN 0954-4070.

UNSPECIFIED (1992) PARALLEL AND PERPENDICULAR PHONON-DRAG THERMOPOWER IN SEMICONDUCTOR SUPERLATTICES. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 7 (11). pp. 1344-1349. ISSN 0268-1242.

UNSPECIFIED (1982) THE PARAMETER RASH - IS THERE A CURE. WEAR, 83 (1). pp. 75-78. ISSN 0043-1648.

UNSPECIFIED (1989) THE PERFORMANCE OF CERAMIC TOOL MATERIALS FOR THE MACHINING OF CAST-IRON. WEAR, 135 (1). pp. 147-159. ISSN 0043-1648.

UNSPECIFIED (1994) PERFORMANCE OF COMPOSITE CONNECTIONS - MAJOR AXIS END-PLATE JOINTS. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 31 (1). pp. 31-57. ISSN 0143-974X.

UNSPECIFIED (1992) PHONON-DRAG MAGNETO-THERMOPOWER IN SEMICONDUCTOR SUPERLATTICES. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 7 (7). pp. 931-934. ISSN 0268-1242.

UNSPECIFIED (1988) PHOTOELECTRON DIFFRACTION FROM OXYGEN-CONTAINING SPECIES ON CU(100). VACUUM, 38 (4-5). pp. 305-307. ISSN 0042-207X.

UNSPECIFIED (1995) PHOTOLUMINESCENCE AND PHOTOREFLECTANCE STUDY OF SI/SI0.91GE0.09 AND SI-9/GE-6 QUANTUM DOTS. JOURNAL OF ELECTRONIC MATERIALS, 24 (2). pp. 99-106. ISSN 0361-5235.

UNSPECIFIED (1995) POLYSULFIDE BASED COATINGS FOR ENVIRONMENTAL-PROTECTION. JOCCA-SURFACE COATINGS INTERNATIONAL, 78 (1). pp. 19-24. ISSN 1356-0751.

UNSPECIFIED (1994) PREPARATION AND CHARACTERIZATION OF LN(2)ZR(2)O(7) MICROSPHERES BY AN INORGANIC SOL-GEL ROUTE. JOURNAL OF MATERIALS SCIENCE, 29 (23). pp. 6076-6078. ISSN 0022-2461.

UNSPECIFIED (1985) PRESSURELESS-SINTERED CERAMICS BASED ON THE COMPOUND SI2N2O. MATERIALS SCIENCE AND ENGINEERING, 71 (1-2). pp. 87-94. ISSN 0025-5416.

UNSPECIFIED (1993) PRESYNTHESISED INTERFACES FOR CERAMIC-MATRIX COMPOSITES VIA FIBER COATING. MATERIALS LETTERS, 17 (5). pp. 246-252. ISSN 0167-577X.

UNSPECIFIED (1992) THE PROBLEMS OF SOCIAL AUTOPOIESIS. INTERNATIONAL JOURNAL OF GENERAL SYSTEMS, 21 (2). pp. 229-236. ISSN 0308-1079.

UNSPECIFIED (2003) Performance enhancement in Si/Si0.5Ge0.5/Si strained alloy p-channel metal oxide semiconductor field effect transistors. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 18 (11). pp. 945-949. ISSN 0268-1242.

UNSPECIFIED (1998) Periods and damping of the oscillatory exchange coupling across Cu(1-x)Ni-x alloy spacers. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 185 (3). pp. 293-304. ISSN 0304-8853.

UNSPECIFIED (1997) Phase transition in BiVO4. MATERIALS LETTERS, 30 (1). pp. 7-13. ISSN 0167-577X.

UNSPECIFIED (2002) Phenomenological model of propagation of the elastic waves in a fluid-saturated porous solid with nonzero boundary slip velocity. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 112 (3 Part 1). pp. 843-849. doi:10.1121/1.1499134 ISSN 0001-4966.

UNSPECIFIED (1986) Phonon-scattering limitation of the metallic conductivity of a quasi-two-dimensional semiconductor structure. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 1 (1). pp. 58-62. ISSN 0268-1242.

UNSPECIFIED (2006) Photoelastic detection of build errors in high fidelity pin-tool arrays. STRAIN, 42 (2). pp. 121-125. ISSN 0039-2103.

UNSPECIFIED (2003) Physical testing for concentrically loaded columns of pultruded glass fibre reinforced plastic profile. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 156 (2). pp. 205-219. ISSN 0965-0911.

UNSPECIFIED (1996) Polycrystalline MnZn ferrite films prepared by pulsed laser deposition. MATERIALS LETTERS, 29 (4-6). pp. 199-203. ISSN 0167-577X.

UNSPECIFIED (1999) Polycrystalline yttrium aluminium garnet (YAG) fibres produced from the steaming of an aqueous sol-gel precursor. MATERIALS LETTERS, 39 (3). pp. 173-178. ISSN 0167-577X.

UNSPECIFIED (2006) Polydispersity in oligomeric low dosage gas hydrate inhibitors. JOURNAL OF MATERIALS CHEMISTRY, 16 (20). pp. 1934-1942. doi:10.1039/b600285b ISSN 0959-9428.

UNSPECIFIED (1996) Polymer composite material characterisation using a laser/air-transducer system. ULTRASONICS, 34 (8). pp. 825-833. ISSN 0041-624X.

UNSPECIFIED (1997) Polymer moulding manufacturing using rapid tooling. POLYMERS & POLYMER COMPOSITES, 5 (5). pp. 369-375. ISSN 0967-3911.

UNSPECIFIED (2001) Prediction of the initial stiffness of ductile end-plate steel connections. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 146 (1). pp. 17-29. ISSN 0965-0911.

UNSPECIFIED (2002) Preliminary investigations of the dimensional stability of super-critically carbonated glass fibre reinforced cement. CEMENT AND CONCRETE RESEARCH, 32 (10). pp. 1639-1644. ISSN 0008-8846.

UNSPECIFIED (2004) Preliminary investigations of the phase composition and fine pore structure of super-critically carbonated cement pastes. JOURNAL OF MATERIALS SCIENCE, 39 (18). pp. 5683-5687. ISSN 0022-2461.

UNSPECIFIED (1998) Preparation and characterization of LnPrO(3+y) (Ln = Y and lanthanide) - a series of mixed lanthanide oxides. MATERIALS LETTERS, 37 (1-2). pp. 10-16. ISSN 0167-577X.

UNSPECIFIED (1997) Preparation and characterization of high surface area alumina-titania solid acids. JOURNAL OF MATERIALS SCIENCE, 32 (21). pp. 5583-5592. ISSN 0022-2461.

UNSPECIFIED (1997) Preparation, structure and electrical conductivity of Pr1-xLaxO2-delta (x=0.05, 0.1, 0.2). JOURNAL OF MATERIALS SCIENCE LETTERS, 16 (13). pp. 1089-1091. ISSN 0261-8028.

UNSPECIFIED (2001) Processing and size effects on the optical properties of sputtered oxide thin films. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 86 (1). pp. 41-47. ISSN 0921-5107.

UNSPECIFIED (2000) Pulsed laser ablation deposition of yttrium iron garnet and cerium-substituted YIG films. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 220 (2-3). pp. 183-194. ISSN 0304-8853.

UNSPECIFIED (2006) Quantitative evaluation about property of thin-film formation. Surface Science, 252 (10). pp. 3553-3560. doi:10.1016/j.apsusc.2005.05.025 ISSN 0169-4332.

UNSPECIFIED (2004) Quantum tunneling of the magnetization in the Ising chain compound Ca3Co2O6. JOURNAL OF MATERIALS CHEMISTRY, 14 (8). pp. 1231-1234. doi:10.1039/b316717h ISSN 0959-9428.

UNSPECIFIED (1987) RADIAL DEVIATION GAUGE. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 9 (4). pp. 201-209. ISSN 0141-6359.

UNSPECIFIED (1992) RANDOM FIELD EFFECTS AND BREAKUP OF HELIMAGNETISM IN GD60Y40. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 116 (1-2). pp. 267-272. ISSN 0304-8853.

UNSPECIFIED (1992) RAPID OPTICAL DETERMINATIONS OF ORIENTATION IN ROLL-DRAWN POLYPROPYLENE. JOURNAL OF MATERIALS SCIENCE LETTERS, 11 (21). pp. 1449-1451. ISSN 0261-8028.

UNSPECIFIED (1992) REACTION PROCESSES BETWEEN SILVER OR ZINC DOPED PB-SN SOLDER AND GOLD. MATERIALS SCIENCE AND TECHNOLOGY, 8 (10). pp. 930-937. ISSN 0267-0836.

UNSPECIFIED (1993) RECOMMENDATIONS FOR THE OPTIMUM DESIGN OF PULTRUDED FRAMEWORKS. MECHANICS OF COMPOSITE MATERIALS, 29 (5). pp. 503-508. ISSN 0191-5665.

UNSPECIFIED (1991) REINVESTIGATION OF THE NICKEL PHOSPHINE CATALYZED ELECTROCHEMICAL SYNTHESIS OF POLY(2,5-PYRIDINE) - X-RAY CRYSTAL-STRUCTURES OF [NI2BR2(MU-5-BRC5H3N-C2,N)2(PPH3)2] AND [PTBR(5-BRC5H3N-C2)(PPH3)2]. JOURNAL OF MATERIALS CHEMISTRY, 1 (4). pp. 569-576. ISSN 0959-9428.

UNSPECIFIED (1995) RESISTANCE TO LONGITUDINAL SHEAR OF COMPOSITE BEAMS WITH PROFILED SHEETING. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 110 (2). pp. 204-215. ISSN 0965-0911.

UNSPECIFIED (1985) RESONANT RAMAN-SCATTERING WITH GAMMA-RAYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 52 (4). pp. 899-908. ISSN 0141-8637.

UNSPECIFIED (1985) A RIGID PLASTIC METHOD FOR THE DETERMINATION OF COLLAPSE LOADS OF INFILLED PANELS WITH OPENINGS. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 20 (1). pp. 41-52. ISSN 0309-3247.

UNSPECIFIED (1985) THE ROLE OF HYDROGEN ON FERMI LEVEL HOPPING IN A-GE. JOURNAL OF NON-CRYSTALLINE SOLIDS, 77-8 (Part 1). pp. 475-478. ISSN 0022-3093.

UNSPECIFIED (2003) Radiated fields of capacitive micromachined ultrasonic transducers in air. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 114 (3). pp. 1435-1449. doi:10.1121/1.1604120 ISSN 0001-4966.

UNSPECIFIED (1996) Rare-earth-doped alpha'-Sialon ceramics with novel optical properties. JOURNAL OF MATERIALS RESEARCH, 11 (11). pp. 2790-2794. ISSN 0884-2914.

UNSPECIFIED (2005) Ray absorption spectroscopy study of the incorporated copper species in anodic alumina films formed on an Al-2 wt % Cu alloy. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 152 (10). B393-B396. doi:10.1149/1.2007087 ISSN 0013-4651.

UNSPECIFIED (1998) Rayleigh wave dispersion on extruded aluminium. INSIGHT, 40 (9). pp. 632-634. ISSN 1354-2575.

UNSPECIFIED (2002) Recent developments in the characterisation of aluminium sheets using electromagnetic acoustic transducers (EMATs). INSIGHT, 44 (5). pp. 274-278. ISSN 1354-2575.

UNSPECIFIED (2003) Reducing performance variations of compression moulded long glass fibre reinforced thermoplastics by targeted reinforcement. PLASTICS RUBBER AND COMPOSITES, 32 (8-9). pp. 396-412. ISSN 1465-8011.

UNSPECIFIED (2000) Resistance of stud shear connectors to fatigue. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 56 (2). pp. 101-116. ISSN 0143-974X.

UNSPECIFIED (1987) SELECTION OF STRUCTURAL-MATERIALS FOR PRECISION DEVICES. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 9 (1). pp. 3-6. ISSN 0141-6359.

UNSPECIFIED (1984) SHEAR TRANSFER ACROSS CRACKS IN REINFORCED-CONCRETE DUE TO AGGREGATE INTERLOCK AND TO DOWEL ACTION. MAGAZINE OF CONCRETE RESEARCH, 36 (126). pp. 9-21. ISSN 0024-9831.

UNSPECIFIED (1985) SHEAR TRANSFER IN CRACKED REINFORCED-CONCRETE. MAGAZINE OF CONCRETE RESEARCH, 37 (130). pp. 3-15. ISSN 0024-9831.

UNSPECIFIED (1993) SIMULTANEOUS ACOUSTIC-EMISSION AND ULTRASONIC TOMOGRAPHIC IMAGING IN ANISOTROPIC POLYMER COMPOSITE-MATERIAL. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 94 (2 Part 1). pp. 944-953. ISSN 0001-4966.

UNSPECIFIED (1993) STABILITY OF CONTINUOUS COMPOSITE PLATE GIRDERS WITH U-FRAME ACTION. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 99 (2). pp. 187-197. ISSN 0965-0911.

UNSPECIFIED (1993) STABILITY OF INTERFACES IN CALCIUM ALUMINOSILICATE MATRIX NICALON SIC FIBER COMPOSITES. JOURNAL OF MATERIALS SCIENCE LETTERS, 12 (13). pp. 998-1001. ISSN 0261-8028.

UNSPECIFIED (1993) STRENGTH AND STIFFNESS OF DISCRETE U-FRAMES IN COMPOSITE PLATE GIRDERS. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 99 (2). pp. 199-209. ISSN 0965-0911.

UNSPECIFIED (1993) STRESS DEPENDENCE OF THE ACOUSTIC PROPERTIES OF ZR-2.5 WT-PERCENT NB ALLOY. ULTRASONICS, 31 (3). pp. 183-192. ISSN 0041-624X.

UNSPECIFIED (1988) STRUCTURAL ASPECTS OF SODIUM BOROSILICATE GLASSES. JOURNAL OF NON-CRYSTALLINE SOLIDS, 101 (2-3). pp. 280-286. ISSN 0022-3093.

UNSPECIFIED (1989) STRUCTURAL CHEMISTRY OF ANODIC ALUMINA. THIN SOLID FILMS, 173 (2). pp. 209-215. ISSN 0040-6090.

UNSPECIFIED (1995) STRUCTURAL ROLE OF ZIRCONIUM IN SIO2-ZRO2 GELS - EVIDENCE FROM O-17 NMR. JOURNAL OF MATERIALS CHEMISTRY, 5 (8). pp. 1261-1263. ISSN 0959-9428.

UNSPECIFIED (1991) STRUCTURAL STUDIES OF POTASSIUM TITANYL PHOSPHATE (KTP) UNDER HIGH-PRESSURE. FERROELECTRICS, 124 (1-4). pp. 367-372. ISSN 0015-0193.

UNSPECIFIED (1989) STRUCTURE AND DEGRADATION OF TYRANNO FIBERS. MATERIALS LETTERS, 8 (8). pp. 263-268. ISSN 0167-577X.

UNSPECIFIED (1986) THE STRUCTURE OF BINARY ALKALI SILICATE-GLASSES. JOURNAL OF NON-CRYSTALLINE SOLIDS, 81 (1-2). pp. 185-200. ISSN 0022-3093.

UNSPECIFIED (1984) THE STRUCTURE OF SODA SILICA GLASSES - A MAS NMR-STUDY. JOURNAL OF NON-CRYSTALLINE SOLIDS, 68 (2-3). pp. 399-410. ISSN 0022-3093.

UNSPECIFIED (1989) STUDIES OF INTERFACE REACTIONS BETWEEN GLASS CERAMIC COATINGS AND METALS. JOURNAL OF NON-CRYSTALLINE SOLIDS, 112 (1-3). pp. 357-363. ISSN 0022-3093.

UNSPECIFIED (1994) STUDIES OF LASER-GENERATED ULTRASOUND USING A MICROMACHINED SILICON ELECTROSTATIC TRANSDUCER IN AIR. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 95 (5 Part 1). pp. 2567-2575. ISSN 0001-4966.

UNSPECIFIED (1985) A STUDY OF DKDP AND KDP CRYSTALS IN AN APPLIED ELECTRIC-FIELD BY SYNCHROTRON RADIATION TOPOGRAPHY. FERROELECTRICS, 62 (1-2). pp. 53-58. ISSN 0015-0193.

UNSPECIFIED (1984) A STUDY OF SLIP NUCLEATION IN FE-3.5-PERCENT SI SINGLE-CRYSTALS BY SYNCHROTRON RADIATION TOPOGRAPHY. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 50 (4). pp. 487-504. ISSN 0141-8610.

UNSPECIFIED (1988) A STUDY OF THE ALTERED LAYER PRODUCED BY OXYGEN BOMBARDMENT OF SILICON. VACUUM, 38 (8-10). pp. 937-941. ISSN 0042-207X.

UNSPECIFIED (1994) STUDY OF THE FERROELASTIC TRANSFORMATION IN ZIRCONIA BY NEUTRON-DIFFRACTION. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 69 (3). pp. 499-507. ISSN 0141-8637.

UNSPECIFIED (1990) SUB-NANOMETER DISPLACEMENTS CALIBRATION USING X-RAY INTERFEROMETRY. MEASUREMENT SCIENCE & TECHNOLOGY, 1 (2). pp. 107-119. ISSN 0957-0233.

UNSPECIFIED (1990) SUBNANOMETER TRANSDUCER CHARACTERIZATION BY X-RAY INTERFEROMETRY. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 12 (3). pp. 165-171. ISSN 0141-6359.

UNSPECIFIED (1983) SURFACE EXAFS AND PHOTOELECTRON DIFFRACTION. VIDE-SCIENCE TECHNIQUE ET APPLICATIONS, 38 (216). pp. 189-196. ISSN 1266-0167.

UNSPECIFIED (1982) SYNCHROTRON RADIATION-DAMAGE IN SODIUM-BROMATE. JOURNAL OF MATERIALS SCIENCE LETTERS, 1 (7). pp. 300-302. ISSN 0261-8028.

UNSPECIFIED (2004) Scanning electrochemical microscopy (SECM) studies of oxygen transfer across phospholipid monolayers under surface pressure control: Comparison of monolayers at air/water and oil/water interfaces. LANGMUIR, 20 (3). pp. 701-707. doi:10.1021/la034943w ISSN 0743-7463.

UNSPECIFIED (2005) Scanning tunneling microscopy investigation of the structure of methanethiolate on Ag(111). LANGMUIR, 21 (16). pp. 7285-7291. doi:10.1021/la0503810 ISSN 0743-7463.

UNSPECIFIED (1997) Screening phenomena in Si/Si1-xGex quantum wells. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 12 (10). pp. 1231-1234. ISSN 0268-1242.

UNSPECIFIED (1998) Searches for skyrmions in the limit of zero g-factor. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 13 (7). pp. 671-679. ISSN 0268-1242.

UNSPECIFIED (1996) Secondary ion mass spectroscopy resolution with ultra-low beam energies. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 14 (4). pp. 2645-2650. ISSN 0734-2101.

UNSPECIFIED (1998) The Selborne cutting stability experiment. GEOTECHNIQUE, 48 (1). pp. 83-101. ISSN 0016-8505.

UNSPECIFIED (2004) Shear modulus of standard pultruded fiber reinforced plastic material. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 8 (2). pp. 141-147. doi:10.1061/(ASCE)1090-0268(2004)8:2(141) ISSN 1090-0268.

UNSPECIFIED (2001) Si-29 T-1 relaxation in alkali silicate glasses: a method for detecting glass-in-glass phase separation. JOURNAL OF NON-CRYSTALLINE SOLIDS, 281 (1-3). pp. 108-116. ISSN 0022-3093.

UNSPECIFIED (2006) Si3N4-TiN based micro-laminates with rising R-curve behaviour. COMPOSITES PART B-ENGINEERING, 37 (6). pp. 459-465. doi:10.1016/j.compositesb.2006.02.013 ISSN 1359-8368.

UNSPECIFIED (2000) SiGe CMOS fabrication using SiGe MBE and anodic/LTO gate oxide. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 15 (2). pp. 135-138. ISSN 0268-1242.

UNSPECIFIED (2002) SiGe(C) epitaxial technologies - issues and prospectives. THIN SOLID FILMS, 412 (1-2). pp. 44-49. ISSN 0040-6090.

UNSPECIFIED (2003) Simultaneous reconstruction of flow and temperature cross-sections in gases using acoustic tomography. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 114 (2). pp. 759-766. doi:10.1121/1.1592523 ISSN 0001-4966.

UNSPECIFIED (1996) Single-crystal K-x(ZnyTi8-y)O-16 priderites: Growth and characterization. JOURNAL OF MATERIALS SCIENCE, 31 (24). pp. 6463-6468. ISSN 0022-2461.

UNSPECIFIED (2003) Single-walled carbon nanotubes as templates for nanowire conducting probes. NANO LETTERS, 3 (10). pp. 1365-1369. doi:10.1021/nl034505+ ISSN 1530-6984.

UNSPECIFIED (1996) Sol gel preparation, structure and thermal stability of crystalline zirconium titanate microspheres. JOURNAL OF MATERIALS SCIENCE, 31 (1). pp. 267-271. ISSN 0022-2461.

UNSPECIFIED (2005) Sol-gel synthesis of the P2O5-CaO-Na2O-SiO2 system as a novel bioresorbable glass. JOURNAL OF MATERIALS CHEMISTRY, 15 (21). pp. 2134-2140. doi:10.1039/b414885a ISSN 0959-9428.

UNSPECIFIED (2001) Solid state NMR and X-ray studies of the structural evolution of nanocrystalline zirconia. CHEMISTRY OF MATERIALS, 13 (4). pp. 1219-1229. ISSN 0897-4756.

UNSPECIFIED (2001) Solid-state Ti-47,Ti-49 NMR determination of the phase distribution of titania nanoparticles. CHEMISTRY OF MATERIALS, 13 (2). pp. 462-467. doi:10.1021/cm0011918 ISSN 0897-4756.

UNSPECIFIED (1999) Some steps towards the recovery of technical writing as a democratic art: An historicist plea for rhetoric - Commentary on "Rhetoric, technical writing and ethics". SCIENCE AND ENGINEERING ETHICS, 5 (4). pp. 479-483. ISSN 1353-3452.

UNSPECIFIED (1999) Some theoretical aspects of surface peak parameters. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 23 (2). pp. 94-102. ISSN 0141-6359.

UNSPECIFIED (2004) Specific heat studies of PrCoAl4 single crystal. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 281 (2-3). pp. 378-381. doi:10.1016/j.jmmm.2004.04.134 ISSN 0304-8853.

UNSPECIFIED (1999) Spectral emissivity of ytterbium oxide-based materials for application as selective emitters in thermophotovoltaic devices. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 59 (4). pp. 337-348. ISSN 0927-0248.

UNSPECIFIED (1998) Spectral transmittance and related properties of ceria-gadolinia thin films. JOURNAL OF MATERIALS SCIENCE LETTERS, 17 (15). pp. 1329-1331. ISSN 0261-8028.

UNSPECIFIED (2001) Sputter deposition of compositional gradient magnetostrictive FeCo based thin films. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 237 (2). pp. 175-180. ISSN 0304-8853.

UNSPECIFIED (1997) Stiffness and strength of lateral restraints to compressed flanges. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 42 (2). pp. 73-93. ISSN 0143-974X.

UNSPECIFIED (2001) Stiffness estimation of a parallel kinematic machine. SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 44 (5). pp. 473-485. ISSN 1006-9321.

UNSPECIFIED (2004) Strain rate dependency of the shear properties of a highly oriented thermoplastic composite material using a contacting displacement measurement methodology - Part B: shear damage evolution. COMPOSITES SCIENCE AND TECHNOLOGY, 64 (5). pp. 739-748. doi:10.1016/j.compscitech.2003.09.018 ISSN 0266-3538.

UNSPECIFIED (2004) Strain rate effects on the shear mechanical properties of a highly oriented thermoplastic composite material using a contacting displacement measurement methodology - Part A: elasticity and shear strength. COMPOSITES SCIENCE AND TECHNOLOGY, 64 (5). pp. 729-738. doi:10.1016/j.compscitech.2003.08.001 ISSN 0266-3538.

UNSPECIFIED (2005) Strengthening of container glasses by ion-exchange dip coating. JOURNAL OF NON-CRYSTALLINE SOLIDS, 351 (30-32). pp. 2524-2536. doi:10.1016/j.jnoncrysol.2005.06.040 ISSN 0022-3093.

UNSPECIFIED (2000) Structural and magnetic properties of sodium iron germanate glasses. JOURNAL OF NON-CRYSTALLINE SOLIDS, 272 (2-3). pp. 179-190. ISSN 0022-3093.

UNSPECIFIED (2004) Structural implications of water and boron dissolution in albite glass. JOURNAL OF NON-CRYSTALLINE SOLIDS, 337 (3). pp. 207-219. doi:10.1016/j.jnoncrysol.2004.04.007 ISSN 0022-3093.

UNSPECIFIED (2001) Structural properties of composite major axis end plate connections. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 57 (3). pp. 327-349. ISSN 0143-974X.

UNSPECIFIED (1996) Structural properties of multi-component silicon oxycarbide glasses derived from metal alkoxide precursors. JOURNAL OF NON-CRYSTALLINE SOLIDS, 204 (3). pp. 217-227. ISSN 0022-3093.

UNSPECIFIED (2005) Structural studies of silica- and alumina-pinned nanocrystalline SnO2. NANOTECHNOLOGY, 16 (9). pp. 1836-1843. doi:10.1088/0957-4484/16/9/070 ISSN 0957-4484.

UNSPECIFIED (2003) Structure and magnetic properties of vanadium-sodium silicate glasses. JOURNAL OF NON-CRYSTALLINE SOLIDS, 318 (1-2). pp. 193-201. ISSN 0022-3093.

UNSPECIFIED (1998) Structure and oxygen stoichiometry of phases in La-Pr-O system. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 52 (2-3). pp. 162-168. ISSN 0921-5107.

UNSPECIFIED (2001) Structure factor of a lamellar smectic phase with inclusions. EUROPEAN PHYSICAL JOURNAL E, 4 (1). pp. 115-120. ISSN 1292-8941.

UNSPECIFIED (2000) Structure of (Ta2O5)(x)(SiO2)(1-x) xerogels (x=0.05, 0.11, 0.18, 0.25 and 1.0) from FTIR, Si-29 and O-17 MAS NMR and EXAFS. JOURNAL OF MATERIALS CHEMISTRY, 10 (8). pp. 1887-1894. ISSN 0959-9428.

UNSPECIFIED (1999) Structure, oxygen stoichiometry and electrical conductivity of LnPrO(3+y) (Ln = Y and Lanthanide) oxides. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 58 (3). pp. 215-220. ISSN 0921-5107.

UNSPECIFIED (2000) Studies of the effect of paramagnetic impurity in the structure of sodium disilicate glass. JOURNAL OF MATERIALS SCIENCE, 35 (11). pp. 2829-2832. ISSN 0022-2461.

UNSPECIFIED (2000) Study of diffusion and defects by medium-energy coaxial impact-collision ion scattering spectroscopy. DEFECTS AND DIFFUSION IN SEMICONDUCTORS, 183-1 . pp. 207-213. ISSN 1012-0386.

UNSPECIFIED (2003) Study of the surface roughness of CVD-tungsten oxide thin films. Surface Science, 218 (1-4). pp. 162-168. doi:10.1016/S0169-4332(03)00575-0 ISSN 0169-4332.

UNSPECIFIED (2002) Subjective rating scales in ergonomics: a reply. ERGONOMICS, 45 (14). pp. 1042-1046. doi:10.1080/00140130210166762 ISSN 0014-0139.

UNSPECIFIED (2002) Subjective rating scales: science or art? ERGONOMICS, 45 (14). pp. 966-987. doi:10.1080/00140130210166951 ISSN 0014-0139.

UNSPECIFIED (1998) Substrate strain induced crystallographic texture in sputtered vanadium metal films. JOURNAL OF MATERIALS RESEARCH, 13 (11). pp. 3221-3226. ISSN 0884-2914.

UNSPECIFIED (2001) Super-critical carbonation of glass-fibre reinforced cement. Part 1: mechanical testing and chemical analysis. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 32 (12). pp. 1777-1787. ISSN 1359-835X.

UNSPECIFIED (2003) Super-critical carbonation of glass-fibre reinforced cement. Part 2: Microstructural observations. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (11). pp. 1105-1112. doi:10.1016/S1359-835X(03)00211-2 ISSN 1359-835X.

UNSPECIFIED (1998) Surface and bulk phases in substituted cobalt oxide spinels. JOURNAL OF MATERIALS CHEMISTRY, 8 (4). pp. 1095-1098. ISSN 0959-9428.

UNSPECIFIED (1999) Surface finish and lubrication at low cutting speeds. MATERIALS SCIENCE AND TECHNOLOGY, 15 (2). pp. 221-225. ISSN 0267-0836.

UNSPECIFIED (2002) Surface metrology using reflected ultrasonic signals in air. ULTRASONICS, 39 (7). pp. 479-486. ISSN 0041-624X.

UNSPECIFIED (1999) Surface reactivity of aluminas prepared by different techniques. Surface Science, 147 (1-4). pp. 228-234. ISSN 0169-4332.

UNSPECIFIED (1997) Surface segregation and phase separation in bismuth-tin pyrochlores. JOURNAL OF MATERIALS CHEMISTRY, 7 (5). pp. 837-841. ISSN 0959-9428.

UNSPECIFIED (2003) Surface segregation of lanthanum and cerium ions in ceria/lanthana solid solutions: comparison between experimental results and a statistical-mechanical model. Surface Science, 206 (1-4). pp. 12-19. ISSN 0169-4332.

UNSPECIFIED (2001) Synthesis and characterization of partially and fully stabilized zirconia fibers made from an inorganic precursor. JOURNAL OF MATERIALS RESEARCH, 16 (8). pp. 2384-2390. ISSN 0884-2914.

UNSPECIFIED (2005) Synthesis and structure of a calcium polyphosphate with a unique criss-cross arrangement of helical phosphate chains. CHEMISTRY OF MATERIALS, 17 (18). pp. 4642-4646. doi:10.1021/cm050984x ISSN 0897-4756.

UNSPECIFIED (2000) Synthesis, characterisation and performance of (TiO2)(0.18)(SiO2)(0.82) xerogel catalysts. JOURNAL OF MATERIALS CHEMISTRY, 10 (11). pp. 2495-2501. ISSN 0959-9428.

UNSPECIFIED (1990) TEA-CO2 LASER GENERATION OF ULTRASOUND IN NONMETALS. ULTRASONICS, 28 (6). pp. 343-349. ISSN 0041-624X.

UNSPECIFIED (1982) TENSION-FIELD ACTION IN COMPOSITE PLATE GIRDERS. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 2-RESEARCH AND THEORY, 73 (JUN). pp. 255-276. ISSN 0307-8361.

UNSPECIFIED (1983) THERMAL-CONDUCTIVITY OF SOLID UO2 - CRITIQUE AND RECOMMENDATION. JOURNAL OF NUCLEAR MATERIALS, 113 (2-3). pp. 125-132. ISSN 0022-3115.

UNSPECIFIED (1992) THERMAL-EXPANSION AND STRESS-RELAXATION OF METAL-MATRIX COMPOSITES. COMPOSITES SCIENCE AND TECHNOLOGY, 45 (4). pp. 307-312. ISSN 0266-3538.

UNSPECIFIED (1991) THERMOPLASTICS SHAPE THE FUTURE. ENGINEERING, 231 (8). ACE11-&. ISSN 0013-7782.

UNSPECIFIED (1995) THROUGH-THICKNESS CHARACTERIZATION OF SOLIDS BY WIDE-BAND AIR-COUPLED ULTRASOUND. ULTRASONICS, 33 (1). pp. 11-17. ISSN 0041-624X.

UNSPECIFIED (1995) TOOL-WEAR PREDICTION USING ARTIFICIAL NEURAL NETWORKS. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 49 (3-4). pp. 255-264. ISSN 0924-0136.

UNSPECIFIED (1993) TRIBOLOGICAL PROPERTIES OF ELECTROACTIVE POLYMERIC THIN-FILM BEARINGS. WEAR, 169 (1). pp. 43-57. ISSN 0043-1648.

UNSPECIFIED (2003) Technology management - a complex adaptive systems approach. INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 25 (8). pp. 728-745. ISSN 0267-5730.

UNSPECIFIED (2005) Technology strategy revealed: patterns and influences of patent-licensing behaviour in Japanese firms. INTERNATIONAL JOURNAL OF TECHNOLOGY MANAGEMENT, 30 (3-4). pp. 327-350. ISSN 0267-5730.

UNSPECIFIED (1998) Temperature and ionic size dependence of the properties of ceria based optionic thin films. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 55 (1-2). pp. 14-20. ISSN 0921-5107.

UNSPECIFIED (2001) Temperature and ionic size dependence on the structure and optical properties of nanocrystalline lanthanide doped zirconia thin films. THIN SOLID FILMS, 384 (2). pp. 254-260. ISSN 0040-6090.

UNSPECIFIED (1996) Temperature-dependent NDE of hydrided Zr-Nb tubing. INSIGHT, 38 (2). pp. 102-107. ISSN 1354-2575.

UNSPECIFIED (1997) Tensile behavior and cyclic creep of continuous fiber-reinforced glass matrix composites at room and elevated temperatures. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 6 (3). pp. 344-348. ISSN 1059-9495.

UNSPECIFIED (1999) Theory and methodology for kinematic design of Gough-Stewart platforms. SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 42 (4). pp. 425-436. ISSN 1006-9321.

UNSPECIFIED (2004) Thermal stability and saturation magnetization of a new series of amorphous Fe80-xCoxP14B6 (20 <= x <= 40) alloys. MATERIALS LETTERS, 58 (24). pp. 2988-2992. doi:10.1016/j.matlet.2004.05.023 ISSN 0167-577X.

UNSPECIFIED (2003) Through-transmission imaging of solids in air using ultrasonic gas-jet waveguides. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 50 (11). pp. 1509-1515. ISSN 0885-3010.

UNSPECIFIED (1996) Tolerancing and optimization for model-based robust engineering design. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 12 (2). pp. 119-127. ISSN 0748-8017.

UNSPECIFIED (1998) Tool performance and chip control when machining Ti6Al4V and Inconel 901 using high pressure coolant supply. MACHINING SCIENCE AND TECHNOLOGY, 2 (1). pp. 1-12. ISSN 1091-0344.

UNSPECIFIED (2002) Training for design of experiments using a catapult. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 18 (1). pp. 29-35. doi:10.1002/qre.444 ISSN 0748-8017.

UNSPECIFIED (1999) Transition metal ions in ternary sodium silicate glasses: a Mossbauer and neutron study. JOURNAL OF NON-CRYSTALLINE SOLIDS, 246 (1-2). pp. 104-114. ISSN 0022-3093.

UNSPECIFIED (1995) UK CAR RECYCLING IN 2002 - LESS PLASTIC THAN EXPECTED. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 16 (2-3). pp. 170-178. ISSN 0143-3369.

UNSPECIFIED (1987) ULTRA FINE FINISHING OF DIAMOND TOOLS BY ION-BEAMS. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 9 (2). pp. 71-78. ISSN 0141-6359.

UNSPECIFIED (1991) ULTRASONIC FLEXURAL BIREFRINGENCE IN ROLL-DRAWN POLYPROPYLENE. JOURNAL OF MATERIALS SCIENCE LETTERS, 10 (21). pp. 1283-1285. ISSN 0261-8028.

UNSPECIFIED (1994) THE ULTRASONIC IMPULSE-RESPONSE OF UNIDIRECTIONAL CARBON-FIBER LAMINATES. ULTRASONICS, 32 (5). pp. 347-357. ISSN 0041-624X.

UNSPECIFIED (1994) ULTRASONIC MEASUREMENTS IN POLYMERIC MATERIALS USING AIR-COUPLED CAPACITANCE TRANSDUCERS. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 96 (3). pp. 1634-1642. ISSN 0001-4966.

UNSPECIFIED (1993) ULTRASONIC RAYLEIGH AND LAMB WAVE TOMOGRAPHY. ACUSTICA, 79 (2). pp. 117-127. ISSN 0001-7884.

UNSPECIFIED (1993) ULTRASONIC TOMOGRAPHY USING SCANNED CONTACT TRANSDUCERS. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 93 (6). pp. 3242-3249. ISSN 0001-4966.

UNSPECIFIED (1995) ULTRASONIC-IMAGING OF SILICON-NITRIDE CERAMIC BEFORE AND AFTER FIRING. JOURNAL OF MATERIALS SCIENCE LETTERS, 14 (5). pp. 366-369. ISSN 0261-8028.

UNSPECIFIED (1990) A UNIPOLAR CONVERTER FOR A SWITCHED RELUCTANCE MOTOR. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 26 (2). pp. 222-228. ISSN 0093-9994.

UNSPECIFIED (1985) UNIVERSAL BEHAVIOR OF AC HOPPING CONDUCTIVITY IN DISORDERED-SYSTEMS. JOURNAL OF NON-CRYSTALLINE SOLIDS, 77-8 (Part 1). pp. 135-138. ISSN 0022-3093.

UNSPECIFIED (1985) UNIVERSAL LOW-FREQUENCY BEHAVIOR IN THE AC HOPPING CONDUCTIVITY OF DISORDERED-SYSTEMS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 52 (1). pp. 9-22. ISSN 0141-8637.

UNSPECIFIED (2001) URANS computations for a complex internal isothermal flow. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 190 (22-23). pp. 2893-2907. ISSN 0045-7825.

UNSPECIFIED (1992) THE USE OF DUAL-SPACE FREQUENCY FUNCTIONS IN MACHINE-TOOL MONITORING. MEASUREMENT SCIENCE & TECHNOLOGY, 3 (9). pp. 796-808. ISSN 0957-0233.

UNSPECIFIED (1984) THE USE OF MAGIC-ANGLE-SPINNING NMR IN STRUCTURAL STUDIES OF SI-AL-O-N PHASES. JOURNAL OF MATERIALS SCIENCE LETTERS, 3 (5). pp. 469-470. ISSN 0261-8028.

UNSPECIFIED (1986) THE USE OF OPTICAL DIFFRACTION TECHNIQUES TO OBTAIN INFORMATION ABOUT SURFACE FINISH, TOOL SHAPE AND MACHINE-TOOL CONDITION. WEAR, 109 (1-4). pp. 259-266. ISSN 0043-1648.

UNSPECIFIED (1997) Ultrasonic evaluation of hydride concentration in zirconium-niobium alloys. ULTRASONICS, 35 (3). pp. 241-249. ISSN 0041-624X.

UNSPECIFIED (2003) Ultrasonic propagation in various gases at elevated pressures. MEASUREMENT SCIENCE & TECHNOLOGY, 14 (6). pp. 822-830. ISSN 0957-0233.

UNSPECIFIED (1997) Ultrasonic thickness measurement of power station boiler tubes using electromagnetic acoustic transducers. INSIGHT, 39 (9). pp. 618-621. ISSN 1354-2575.

UNSPECIFIED (2001) Ultrasonic tomographic imaging of an encased, highly attenuating solid medium. RESEARCH IN NONDESTRUCTIVE EVALUATION, 13 (3). pp. 131-152. ISSN 0934-9847.

UNSPECIFIED (1998) Ultrasonic tomographic imaging of temperature and flow fields in gases using air-coupled capacitance transducers. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 104 (6). pp. 3446-3455. ISSN 0001-4966.

UNSPECIFIED (2001) Ultrasound studies of single crystal thulium in an applied magnetic field. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 234 (3). pp. 387-394. ISSN 0304-8853.

UNSPECIFIED (2005) Understanding novel structures through form-finding. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CIVIL ENGINEERING, 158 (4). pp. 178-185. ISSN 0965-089X.

UNSPECIFIED (1995) Using EMATs to measure the wall thickness of hot galvanizing kettles. INSIGHT, 37 (5). pp. 368-370. ISSN 1354-2575.

UNSPECIFIED (2000) Using singular systems analysis to characterise the flow in the wake of a model passenger vehicle. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 85 (1). pp. 1-30. ISSN 0167-6105.

UNSPECIFIED (1991) VISION SYSTEMS-DESIGN. ENGINEERING, 231 (10). 39-&. ISSN 0013-7782.

UNSPECIFIED (1999) Variable optical absorption edge in ion beam sputtered thin ytterbium oxide films. THIN SOLID FILMS, 357 (2). pp. 218-222. ISSN 0040-6090.

UNSPECIFIED (2005) Visualizing acoustic displacements of capacitive micromachined transducers using an interferometric microscope. ACOUSTICS RESEARCH LETTERS ONLINE-ARLO, 6 (2). pp. 75-79. doi:10.1121/1.1851391 ISSN 1529-7853.

UNSPECIFIED (2003) Volatile component analysis as a routine characterisation tool: an approach to fingerprinting polyolefin type and process history using ATD-GC/MS. POLYMER TESTING, 22 (5). pp. 553-570. doi:10.1016/S0142-9418(02)00152-6 ISSN 0142-9418.

UNSPECIFIED (2002) When should shear-flexible stability functions be used in elastic structural analysis? PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 152 (1). pp. 31-40. ISSN 0965-0911.

UNSPECIFIED (2004) Wideband low frequency generation and detection of Lamb and Rayleigh waves using electromagnetic acoustic transducers (EMATs). ULTRASONICS, 42 (10). pp. 1129-1136. doi:10.1016/j.ultras.2004.02.019 ISSN 0041-624X.

UNSPECIFIED (1999) Wind-moment steel frames with standard ductile connections. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 52 (3). pp. 255-268. ISSN 0143-974X.

UNSPECIFIED (2003) World survey of civil engineering programs on fiber reinforced polymer composites for construction. JOURNAL OF PROFESSIONAL ISSUES IN ENGINEERING EDUCATION AND PRACTICE, 129 (3). pp. 155-160. doi:10.1061/(ASCE)1052-3928(2003)129:3(155) ISSN 1052-3928.

UNSPECIFIED (1991) AN X-RAY ABSORPTION STUDY OF BARRIER-TYPE ANODIC FILMS FORMED ON ALUMINUM IN CHROMATE ELECTROLYTES. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 63 (2). pp. 557-571. ISSN 0141-8637.

UNSPECIFIED (1992) X-RAY-DIFFRACTION AND REFLECTIVITY CHARACTERIZATION OF SIGE SUPERLATTICE STRUCTURES. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 7 (5). pp. 627-631. ISSN 0268-1242.

UNSPECIFIED (1997) An X-ray diffraction and Mossbauer study of nanocrystalline Fe2O3-Cr2O3 solid solutions. JOURNAL OF MATERIALS SCIENCE, 32 (3). pp. 557-560. ISSN 0022-2461.

UNSPECIFIED (1996) An X-ray diffraction and NMR study into the mechanism of zircon formation from aqueous sols. JOURNAL OF MATERIALS SCIENCE, 31 (22). pp. 5873-5876. ISSN 0022-2461.

UNSPECIFIED (1999) X-ray magnetic scattering. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 200 (1-3). pp. 755-773. ISSN 0304-8853.

UNSPECIFIED (1998) X-ray photoelectron spectroscopy and spectral transmittance study of stoichiometry in sputtered vanadium oxide films. THIN SOLID FILMS, 312 (1-2). pp. 116-122. ISSN 0040-6090.

UNSPECIFIED (1997) X-ray photoelectron spectroscopy study of copper sodium silicate glass surfaces. JOURNAL OF NON-CRYSTALLINE SOLIDS, 215 (2-3). pp. 271-282. ISSN 0022-3093.

UNSPECIFIED (1999) X-ray studies of self-assembled monolayers on coinage metals. 2. Surface adsorption structures in 1-octanethiol on Cu(111) and Ag(111) and their determination by the normal incidence X-ray standing wave technique. LANGMUIR, 15 (26). pp. 8856-8866. ISSN 0743-7463.

UNSPECIFIED (1999) XANES study of Ti coordination in heat-treated (TiO2)(x)(SiO2)(1-x) xerogels. CHEMISTRY OF MATERIALS, 11 (5). pp. 1253-1258. ISSN 0897-4756.

UNSPECIFIED (1997) XPS and magnetization studies of cobalt sodium silicate glasses. JOURNAL OF NON-CRYSTALLINE SOLIDS, 220 (2-3). pp. 267-279. ISSN 0022-3093.

UNSPECIFIED (1996) An XPS study of iron sodium silicate glass surfaces. JOURNAL OF NON-CRYSTALLINE SOLIDS, 208 (3). pp. 267-276. ISSN 0022-3093.

UNSPECIFIED (2004) Yttrium iron garnet surface modification during pulsed laser ablation deposition. MATERIALS SCIENCE-POLAND, 22 (2). pp. 111-115. ISSN 0137-1339.

UNSPECIFIED (2005) An ab-initio theoretical investigation of the soft-magnetic properties of permalloys. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 295 (2). pp. 110-120. doi:10.1016/j.jmmm.2005.01.005 ISSN 0304-8853.

UNSPECIFIED (1997) The aeroacoustics and aerodynamics of high-speed Coanda devices, Part 1: Conventional arrangement of exit nozzle and surface. JOURNAL OF SOUND AND VIBRATION, 208 (5). pp. 777-801. ISSN 0022-460X.

UNSPECIFIED (1997) The aeroacoustics and aerodynamics of high-speed Coanda devices, Part 2: Effects of modifications for flow control and noise reduction. JOURNAL OF SOUND AND VIBRATION, 208 (5). pp. 803-822. ISSN 0022-460X.

UNSPECIFIED (2002) An analysis of the effect of a reliability paradigm shift on leading British aerospace companies. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 18 (4). pp. 285-292. doi:10.1002/qre.471 ISSN 0748-8017.

UNSPECIFIED (2005) An application of Six Sigma to reduce waste. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 21 (6). pp. 553-570. doi:10.1002/qre.669 ISSN 0748-8017.

UNSPECIFIED (2006) The application of time-frequency analysis to the air-coupled ultrasonic testing of concrete. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 53 (4). pp. 768-776. ISSN 0885-3010.

UNSPECIFIED (1997) A blackboard-based approach to concurrent process design of injection moulding. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 70 (1-3). pp. 258-263. ISSN 0924-0136.

UNSPECIFIED (2004) The calculation of radiated acoustic pressure fields from irregular multi-sided polygons. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 115 (5 Part 1). pp. 2021-2031. doi:10.1121/1.1690079 ISSN 0001-4966.

UNSPECIFIED (1996) A comparison of Maturana's autopoietic social theory and Giddens' theory of structuration. SYSTEMS RESEARCH, 13 (4). pp. 469-482. ISSN 0731-7239.

UNSPECIFIED (1999) The comparison of alumina and zirconia fibres using simple thermal and mechanical techniques. JOURNAL OF MATERIALS SCIENCE, 34 (6). pp. 1277-1279. ISSN 0022-2461.

UNSPECIFIED (2003) A conical air-coupled capacitance transducer for surface imaging. ULTRASONICS, 41 (3). pp. 163-173. doi:10.1016/S0041-624X(03)00098-2 ISSN 0041-624X.

UNSPECIFIED (1997) The cure chemistry of polysulfides. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 17 (4). pp. 345-348. ISSN 0143-7496.

UNSPECIFIED (2003) The demagnetizing energies of a uniformly magnetized cylinder with an elliptic cross-section. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 267 (3). pp. 373-385. doi:10.1016/S0304-8853(03)00406-2 ISSN 0304-8853.

UNSPECIFIED (2003) The detectability of kissing bonds in adhesive joints using ultrasonic techniques. ULTRASONICS, 41 (7). pp. 521-529. doi:10.1016/S0041-624X(03)00156-2 ISSN 0041-624X.

UNSPECIFIED (2005) The effect of Cs2O additions on HLW wasteform glasses. JOURNAL OF NON-CRYSTALLINE SOLIDS, 351 (30-32). pp. 2425-2432. doi:10.1016/j.jnoncrysol.2005.06.035 ISSN 0022-3093.

UNSPECIFIED (1997) The effect of extremely low lubricant volumes in machining. WEAR, 210 (1-2). pp. 76-82. ISSN 0043-1648.

UNSPECIFIED (2003) The effect of laser wavelength on the efficiency of laser-generated ultrasound for the inspection of CFRCs. INSIGHT, 45 (3). pp. 186-189. ISSN 1354-2575.

UNSPECIFIED (2005) The effect of piston bowl temperature on diesel exhaust emissions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 219 (D3). pp. 371-388. doi:10.1243/095440705X6550 ISSN 0954-4070.

UNSPECIFIED (2000) The effect of strain rate and fibre content on the Poisson's ratio of glass/epoxy composites. COMPOSITE STRUCTURES, 48 (1-3). pp. 157-161. ISSN 0263-8223.

UNSPECIFIED (1998) The effects of a CeO2 coating on the corrosion parameters of type 304 stainless steel. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 7 (6). pp. 727-732. ISSN 1059-9495.

UNSPECIFIED (2002) A feature-based proposal for blending freedom surfaces. JOURNAL OF ENGINEERING DESIGN, 13 (4). pp. 341-349. doi:10.1080/0954482021000050785 ISSN 0954-4828.

UNSPECIFIED (2006) The first organic molecule-based metal containing ferrocene. JOURNAL OF MATERIALS CHEMISTRY, 16 (16). pp. 1504-1506. doi:10.1039/b601614f ISSN 0959-9428.

UNSPECIFIED (2006) An investigation into the implementation of virtual reality technologies in support of conceptual design. DESIGN STUDIES, 27 (1). pp. 77-97. doi:10.1016/j.destud.2005.06.002 ISSN 0142-694X.

UNSPECIFIED (2001) An investigation into the use of hardware-in-the-loop simulation with a scaled physical prototype as an aid to design. JOURNAL OF ENGINEERING DESIGN, 12 (3). pp. 231-243. ISSN 0954-4828.

UNSPECIFIED (1999) A laser-EMAT system for ultrasonic weld inspection. ULTRASONICS, 37 (4). pp. 273-281. ISSN 0041-624X.

UNSPECIFIED (1998) The manufacture and characterisation of aligned fibres of the ferroxplana ferrites Co(2)Z, 0.67% CaO-doped Co(2)Z, Co2Y and Co2W. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 186 (3). pp. 313-325. ISSN 0304-8853.

UNSPECIFIED (1998) The manufacture and characterisation of single phase magnetite and haematite aligned fibres from an aqueous sol-gel process. JOURNAL OF MATERIALS SCIENCE, 33 (21). pp. 5229-5235. ISSN 0022-2461.

UNSPECIFIED (1998) The manufacture, characterisation and microwave properties of aligned M ferrite fibres. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 186 (3). pp. 326-332. ISSN 0304-8853.

UNSPECIFIED (2004) The measurement of shear and compression waves in curing epoxy adhesives using ultrasonic reflection and transmission techniques simultaneously. MEASUREMENT SCIENCE & TECHNOLOGY, 15 (5). pp. 939-947. doi:10.1088/0957-0233/15/5/023 ISSN 0957-0233.

UNSPECIFIED (2000) A method for measuring team skills. ERGONOMICS, 43 (8). pp. 1076-1094. ISSN 0014-0139.

UNSPECIFIED (1998) The microwave properties of aligned hexagonal ferrite fibers. JOURNAL OF MATERIALS SCIENCE LETTERS, 17 (12). pp. 973-975. ISSN 0261-8028.

UNSPECIFIED (1986) A mobility calculation for a GaAs/GaAlAs superlattice. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 1 (2). pp. 133-136. ISSN 0268-1242.

UNSPECIFIED (2004) A model for the radiated field of a plane piston after reflection from a curved surface. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 116 (5). pp. 2793-2801. doi:10.1121/1.1808457 ISSN 0001-4966.

UNSPECIFIED (2003) A moving-load model for disc-brake stability analysis. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 125 (1). pp. 53-58. doi:10.1115/1.1521954 ISSN 1048-9002.

UNSPECIFIED (1998) A new approach for measuring the effect of a monolayer on molecular transfer across an air/water interface using scanning electrochemical microscopy. LANGMUIR, 14 (19). pp. 5331-5334. ISSN 0743-7463.

UNSPECIFIED (1996) A novel aqueous route for the synthesis of mullite fibres. JOURNAL OF MATERIALS SCIENCE LETTERS, 15 (19). pp. 1654-1656. ISSN 0261-8028.

UNSPECIFIED (2000) A novel high temperature NMR probe design: application to O-17 studies of gel formation of zirconia. MEASUREMENT SCIENCE & TECHNOLOGY, 11 (12). pp. 1703-1707. ISSN 0957-0233.

UNSPECIFIED (2002) The option to work at home: another privilege for the favoured few? NEW TECHNOLOGY WORK AND EMPLOYMENT, 17 (3). pp. 204-223. ISSN 0268-1072.

UNSPECIFIED (2000) The phonon-drag thermopower in Si : B and Si : Sb delta-doped samples. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 15 (6). pp. 551-556. ISSN 0268-1242.

UNSPECIFIED (1998) The prediction of bacteria type and culture growth phase by an electronic nose with a multi-layer perceptron network. MEASUREMENT SCIENCE & TECHNOLOGY, 9 (1). pp. 120-127. ISSN 0957-0233.

UNSPECIFIED (2003) A preliminary study of conducting polymers as microvalve seals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 355 (1-2). pp. 62-67. doi:10.1016/S0921-5093(03)00047-9 ISSN 0921-5093.

UNSPECIFIED (1996) The preparation of spinel ferrites with spherical morphology. JOURNAL OF MATERIALS SCIENCE LETTERS, 15 (21). pp. 1842-1843. ISSN 0261-8028.

UNSPECIFIED (1999) A process for the production of sub-micron to millimetre sized thermally stable alpha-alumina spheres. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 60 (3). pp. 217-222. ISSN 0921-5107.

UNSPECIFIED (1998) The processing of SiC SiC ceramic matrix composites using a pulsed Nd-YAG laser Part II The effect of process variables. JOURNAL OF MATERIALS SCIENCE, 33 (4). pp. 963-967. ISSN 0022-2461.

UNSPECIFIED (1998) The processing of SiC/SiC ceramic matrix composites using a pulsed Nd YAG laser Part I: Optimisation of pulse parameters. JOURNAL OF MATERIALS SCIENCE, 33 (4). pp. 955-961. ISSN 0022-2461.

UNSPECIFIED (1996) The processing of a magnesium-alumino-silicate matrix, SiC fibre glass-ceramic matrix composite using a pulsed Nd-YAG laser .1. Optimization of pulse parameters. JOURNAL OF MATERIALS SCIENCE, 31 (15). pp. 4111-4119. ISSN 0022-2461.

UNSPECIFIED (1996) The processing of a magnesium-alumino-silicate matrix, SiC fibre glass-ceramic matrix composite using a pulsed Nd-YAG laser .2. The effect of process variables. JOURNAL OF MATERIALS SCIENCE, 31 (15). pp. 4121-4126. ISSN 0022-2461.

UNSPECIFIED (2001) The propagation of ultrasound within a gas jet. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 110 (6). pp. 2964-2973. ISSN 0001-4966.

UNSPECIFIED (2004) A quantitative study of the boron acceptor in diamond by Fourier-transform photocurrent spectroscopy. DIAMOND AND RELATED MATERIALS, 13 (10). pp. 1785-1790. doi:10.1016/j.diamond.2004.04.008 ISSN 0925-9635.

UNSPECIFIED (2005) The radiated fields of focussing air-coupled ultrasonic phased arrays. ULTRASONICS, 43 (3). pp. 183-195. doi:10.1016/j.ultras.2004.04.006 ISSN 0041-624X.

UNSPECIFIED (2004) The reactivation of a landslide during the construction of the Ok Ma tailings dam, Papua New Guinea. QUARTERLY JOURNAL OF ENGINEERING GEOLOGY AND HYDROGEOLOGY, 37 (Part 3). pp. 173-186. ISSN 1470-9236.

UNSPECIFIED (1997) The role of lattice water in determining the reactivity of various crystalline aluminas. JOURNAL OF MATERIALS SCIENCE, 32 (5). pp. 1113-1116. ISSN 0022-2461.

UNSPECIFIED (2004) A simple and efficient numerical method for determination of deformations and stresses in rotating solid shafts with non-linear strain-hardening. COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, 20 (9). pp. 689-697. doi:10.1002/cnm.708 ISSN 1069-8299.

UNSPECIFIED (2001) A static fatigue model for the durability of glass fibre reinforced cement. JOURNAL OF MATERIALS SCIENCE, 36 (22). pp. 5385-5390. ISSN 0022-2461.

UNSPECIFIED (2005) A statistical profile of road accidents during cross-flow turns. ACCIDENT ANALYSIS AND PREVENTION, 37 (4). pp. 721-730. doi:10.1016/j.aap.2005.03.013 ISSN 0001-4575.

UNSPECIFIED (2002) A structural study of the (Na1-xKx)(0.5)Bi0.5TiO3 perovskite series as a function of substitution (x) and temperature. POWDER DIFFRACTION, 17 (4). pp. 301-319. doi:10.1154/1.1505047 ISSN 0885-7156.

UNSPECIFIED (1999) A structural study of(TiO2)(x)(SiO2)(1-x) (x=0.18, 0.30 and 0.41)xerogels prepared using acetylacetone. JOURNAL OF MATERIALS CHEMISTRY, 9 (6). pp. 1299-1305. ISSN 0959-9428.

UNSPECIFIED (2005) The structure of a bioactive calcia-silica sol-gel glass. JOURNAL OF MATERIALS CHEMISTRY, 15 (24). pp. 2369-2374. doi:10.1039/b501496d ISSN 0959-9428.

UNSPECIFIED (1997) A study of materials at high temperature using miniaturized resonant tuning forks and noncontact capacitance transducers. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 102 (3). pp. 1296-1309. ISSN 0001-4966.

UNSPECIFIED (1999) A study of nanocrystalline CeO2/PrOx optoionic thin films: temperature and oxygen vacancy dependence. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 57 (3). pp. 173-178. ISSN 0921-5107.

UNSPECIFIED (1999) A study of the effect of average preset voltage on effective case depth during electrolytic surface-hardening. MATERIALS CHARACTERIZATION, 42 (2-3). pp. 65-71. ISSN 1044-5803.

UNSPECIFIED (1999) A study of the effect of average preset voltage on hardness during electrolytic surface-hardening in aqueous solution. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 91 (1-3). pp. 245-249. ISSN 0924-0136.

UNSPECIFIED (1996) A super-precision linear slideway with angular correction in three axes. NANOTECHNOLOGY, 7 (1). pp. 27-36. ISSN 0957-4484.

UNSPECIFIED (1997) The surface reactivity of different aluminas as revealed by their XPS Cls spectra. Surface Science, 108 (4). pp. 465-470. ISSN 0169-4332.

UNSPECIFIED (2004) A swept frequency multiplication technique for air-coupled ultrasonic NDE. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 51 (10). pp. 1271-1279. ISSN 0885-3010.

UNSPECIFIED (2001) The synthesis and characterisation of Co2X (Ba2Co2Fe28O46) and Co2U (Ba4Co2Fe36O60) ferrite fibres, manufactured from a sol-gel process. JOURNAL OF MATERIALS SCIENCE, 36 (19). pp. 4805-4812. ISSN 0022-2461.

UNSPECIFIED (2001) The synthesis and characterization of the hexagonal Z ferrite, Sr3Co2Fe24O41, from a sol-gel precursor. MATERIALS RESEARCH BULLETIN, 36 (7-8). pp. 1531-1538. ISSN 0025-5408.

UNSPECIFIED (2001) A technique for accurate shear wave velocity measurements of thin epoxy resin samples using electromagnetic acoustic transducers (EMATs). MEASUREMENT SCIENCE & TECHNOLOGY, 12 (5). pp. 615-621. ISSN 0957-0233.

UNSPECIFIED (2004) A theoretical model for a finite-size acoustic receiver. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 115 (4). pp. 1546-1556. doi:10.1121/1.1646406 ISSN 0001-4966.

UNSPECIFIED (2005) A unified numerical approach for thermal analysis of transversely isotropic fiber-reinforced composites containing inhomogeneous interphase. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 36 (6). pp. 728-738. doi:10.1016/j.compositesa.2004.11.007 ISSN 1359-835X.

UNSPECIFIED (1997) The use of O1s charge referencing for the X-ray photoelectron spectroscopy of Al/Si, Al/Ti and Al/Zr mixed oxides. JOURNAL OF MATERIALS SCIENCE LETTERS, 16 (1). pp. 1-3. ISSN 0261-8028.

UNSPECIFIED (2001) The use of air-coupled ultrasound to test paper. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 48 (3). pp. 717-727. ISSN 0885-3010.

UNSPECIFIED (2001) The use of broadband acoustic transducers and pulse-compression techniques for air-coupled ultrasonic imaging. ULTRASONICS, 39 (3). pp. 181-194. ISSN 0041-624X.

UNSPECIFIED (2004) The use of thermoelastic stress analysis to identify defects in polymeric materials. INSIGHT, 46 (9). pp. 550-553. ISSN 1354-2575.

UNSPECIFIED (1996) The validity of C1s charge referencing in the XPS of oxidised Al-Si alloys. Surface Science, 103 (4). pp. 403-407. ISSN 0169-4332.

Abar, Bahram Mirzaie, Bakhshayesh, Yashar, Garcia, Reyes and Hajirasouliha, Iman (2023) A new energy-dissipating RBS connection with double-nut-bolts : seismic performance assessment and design methodology. Engineering Structures, 293 . 116596. doi:10.1016/j.engstruct.2023.116596 ISSN 0141-0296.

Abbas, Syeda, Kelly, Nicole L., Patias, Georgios, Hanna, John V. and McNally, Tony (2020) Cysteamine functionalised reduced graphene oxide modification of maleated poly(propylene). Polymer, 203 . 122750. doi:10.1016/j.polymer.2020.122750 ISSN 0032-3861.

Abbas, Syeda S. and McNally, Tony (2021) Composites of cysteamine functionalised graphene oxide and polypropylene. International Polymer Processing, 36 (3). pp. 297-313. doi:10.1515/ipp-2020-4079 ISSN 0930-777X.

Abbas, Syeda S., Rees, Gregory J., Patias, Georgios, Dancer, Claire E. J., Hanna, John V. and McNally, Tony (2020) In situ cross-linking of silane functionalized reduced graphene oxide and low-density polyethylene. ACS Applied Polymer Materials, 2 (5). pp. 1897-1908. doi:10.1021/acsapm.0c00115 ISSN 2637-6105.

Abbaszadeh, Mahmoud, Atthanayake, Iresha, Thomas, Peter J. and Guo, Weisi (2020) Molecular signal tracking and detection methods in fluid dynamic channels. IEEE Transactions on Molecular, Biological and Multi-Scale Communications, 6 (2). 151 -159. doi:10.1109/TMBMC.2020.3009899 ISSN 2332-7804.

Abdi, Salman, Abdi, Ehsan, Toshani, Hamid and McMahon, Richard A. (2020) Vibration analysis of brushless doubly fed machines in the presence of rotor eccentricity. IEEE Transactions on Energy Conversion, 35 (3). pp. 1372-1380. doi:10.1109/TEC.2020.2987100 ISSN 0885-8969.

Abdulla, Kurdo F., Cunningham, Lee S. and Gillie, Martin (2017) Simulating masonry wall behaviour using a simplified micro-model approach. Engineering Structures, 151 . pp. 349-365. doi:10.1016/j.engstruct.2017.08.021 ISSN 0141-0296.

Abernethy, R. G., Gibson, J. S. K -L., Giannattasio, A., Murphy, J. D., Wouters, O., Bradnam, S., Packer, L. W., Gilbert, M. R., Klimenkov, M., Rieth, M., Schneider, H -C., Hardie, C. D., Roberts, S. G. and Armstrong, D. E. J. (2019) Effects of neutron irradiation on the brittle to ductile transition in single crystal tungsten. Journal of Nuclear Materials, 527 . 151799. doi:10.1016/j.jnucmat.2019.151799 ISSN 0022-3115.

Abeywickrama, Dhaminda B., Griffiths, Nathan, Xu, Zhou and Mouzakitis, Alex (2022) Emergence of norms in interactions with complex rewards. Autonomous Agents and Multi-Agent Systems, 37 . 2. doi:10.1007/s10458-022-09585-3 ISSN 1387-2532.

Abiev, Rufat Sh., Sladkovskiy, Dmitry A., Semikin, Kirill V., Murzin, Dmitry Yu. and Rebrov, Evgeny V. (2020) Non-thermal plasma for process and energy intensification in dry reforming of methane. Catalysts, 10 (11). e1358. doi:10.3390/catal10111358 ISSN 2073-4344.

Ablitt, Chris, Craddock, Sarah, Senn, Mark S., Mostofi, Arash A. and Bristowe, Nicholas C. (2017) The origin of uniaxial negative thermal expansion in layered perovskites. npj Computational Materials, 3 (1). 44. doi:10.1038/s41524-017-0040-0 ISSN 2057-3960.

Ablitt, Chris, McCay, Harriet, Craddock, Sarah, Cooper, Lauren, Reynolds, Emily, Mostofi, Arash A., Bristowe, Nicholas C., Murray, Claire A. and Senn, Mark S. (2020) Tolerance factor control of uniaxial negative thermal expansion in a layered perovskite. Chemistry of Materials, 32 (1). pp. 605-610. doi:10.1021/acs.chemmater.9b04512 ISSN 0897-4756.

Abolfathi, Soroush (2016) Wave runup prediction using M5′ model tree algorithm. Ocean Engineering , 112 . pp. 76-81. doi:10.1016/j.oceaneng.2015.12.016

Abolfathi, Soroush, Cook, Sarah, Yeganeh-Bakhtiary, Abbas, Borzooei, Sina and Pearson, Jonathan M. (2020) Microplastics transport and mixing mechanisms in the nearshore region. Coastal Engineering Proceedings (36v). doi:10.9753/icce.v36v.papers.63 ISSN 2156-1028.

Abu-Zurayk, Rund, Harkin-Jones, Eileen, McNally, Tony, Menary, Gary, Martin, Peter and Armstrong, Cecil (2009) Biaxial deformation behavior and mechanical properties of a polypropylene/clay nanocomposite. Composites Science and Technology, 69 (10). pp. 1644-1652. doi:10.1016/j.compscitech.2009.03.014 ISSN 0266-3538.

Abu-Zurayk, Rund, Harkin-Jones, Eileen, McNally, Tony, Menary, Gary, Martin, Peter, Armstrong, Cecil and McAfee, Marion (2010) Structure–property relationships in biaxially deformed polypropylene nanocomposites. Composites Science and Technology, 70 (9). pp. 1353-1359. doi:10.1016/j.compscitech.2010.04.011 ISSN 0266-3538.

Abulrub, Abdul-Hadi G., Attridge, Alex and Williams, M. A. (Mark A.) (2011) Virtual reality in engineering education: the future of creative learning. International Journal of Emerging Technologies in Learning, Vol.6 (No.4). doi:10.3991/ijet.v6i4.1766 ISSN 1868-8799.

Achadu, Ojodomo J., Nwaji, Njemuwa, Lee, Dongkyu, Lee, Jaebeom, Akinoglu, Eser M., Giersig, Michael and Park, Enoch Y. (2022) 3D hierarchically porous magnetic molybdenum trioxide@gold nanospheres as a nanogap-enhanced Raman scattering biosensor for SARS-CoV-2. Nanoscale Advances, 4 (3). 871-883 . doi:10.1039/d1na00746g ISSN 2516-0230.

Achintha, M., Alami, F., Harry, S. and Bloodworth, Alan G. (2018) Towards innovative FRP fabric reinforcement in concrete beams : concrete–CFRP bond. Magazine of Concrete Research, 70 (15). pp. 758-797. doi:10.1680/jmacr.17.00016 ISSN 0024-9831.

Adriaens, A. (Annemie) , De Bisschop, Frank, Dowsett, M. G. and Schotte, Bart (2008) Growth and real time corrosion resistance monitoring of lead decanoate coatings. Surface Science, Vol.254 (No.22). pp. 7351-7355. doi:10.1016/j.apsusc.2008.05.333 ISSN 0039-6028.

Agbo, S. N., Ortiz-Gonzalez, Jose Angel and Alatise, Olayiwola M. (2020) Performance of SiC cascode JFETs under single and repetitive avalanche pulses. Microelectronics Reliability, 110 . 113644. doi:10.1016/j.microrel.2020.113644 ISSN 0026-2714.

Agg, Chloe and Khimji, Samana (2021) Perception of wellbeing in educational spaces. Building Services Engineering Research and Technology, 42 (6). pp. 677-689. doi:10.1177/01436244211009828 ISSN 1477-0849.

Agyapong-Kodua, Kwabena, Asare, K. B. and Ceglarek, Darek (2014) Digital modelling methodology for effective cost assessment. Procedia CIRP, Volume 17 . pp. 744-749. doi:10.1016/j.procir.2014.02.043 ISSN 2212-8271.

Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Némethb, István (2014) Recipe-based integrated semantic product, process, resource (PPR) digital modelling methodology. Procedia CIRP, Volume 17 . pp. 112-117. doi:10.1016/j.procir.2014.03.118 ISSN 2212-8271.

Ahearne, Mark, Liu, Kuo-Kang, El Haj, Alicia J., Then, Kong Y., Rauz, Saaeha and Yang, Y. (Ying) (2010) Online monitoring of the mechanical behavior of collagen hydrogels : influence of corneal fibroblasts on elastic modulus. Tissue Engineering Part C: Methods, Vol.16 (No.2). pp. 319-327. doi:10.1089/ten.tec.2008.0650 ISSN 1937-3384.

Ahearne, Mark, Wilson, Samantha L., Liu, Kuo-Kang, Rauz, Saaeha, El Haj, Alicia J. and Yang, Ying (2010) Influence of cell and collagen concentration on the cell-matrix mechanical relationship in a corneal stroma wound healing model. Experimental Eye Research, Vol.91 (No.5). pp. 584-591. doi:10.1016/j.exer.2010.07.013 ISSN 0014-4835.

Ahmad, Ashfaq, Georgiou, Panagiotis G., Pancaro, Alessia, Hasan, Muhammad, Nelissen, Inge and Gibson, Matthew I. (2022) Polymer-tethered glycosylated gold nanoparticles recruit sialylated glycoproteins into their protein corona, leading to off-target lectin binding. Nanoscale, 14 (36). pp. 13261-13273. doi:10.1039/D2NR01818G ISSN 2040-3364.

Ahmadi-Assalemi, Gabriela, Al-Khateeb, Haider, Epiphaniou, Gregory and Aggoun, Amar (2022) Super learner ensemble for anomaly detection and cyber-risk quantification in industrial control systems. IEEE Internet of Things Journal, 9 (15). pp. 13279-13297. doi:10.1109/JIOT.2022.3144127 ISSN 2327-4662.

Ahmed, A., Bengherbia, T., Zhvansky, R., Ferrara, G., Wen, J. X. (Jennifer X.) and Stocks, Nigel G. (2016) Validation of geometry modelling approaches for offshore gas dispersion simulations. Journal of Loss Prevention in the Process Industries, 44 . pp. 594-600. doi:10.1016/j.jlp.2016.07.009 ISSN 0950-4230.

Ahmed, I., Abou Neel, E. A., Valappil, S. P., Nazhat, S. N., Pickup, D. M., Carta, D., Carroll, Donna L., Newport, R. J., Smith, Mark E. and Knowles, J. C. (2007) The structure and properties of silver-doped phosphate-based glasses. Journal of Materials Science, Vol.42 (No.23). pp. 9827-9835. doi:10.1007/s10853-007-2008-9 ISSN 0022-2461.

Aitkenhead, Adam H., Mills, John A. and Wilson, Adrian J. (2010) An analysis of the origin of differences between measured and simulates fields produced by a 15-element ultrasound phased array. Ultrasound in Medicine & Biology, Vol.36 (No.3). pp. 410-418. doi:10.1016/j.ultrasmedbio.2009.11.010 ISSN 0301-5629.

Akay, Ömer, Poon, Jeffrey, Robertson, Craig, Abdi, Fatwa Firdaus, Cuenya, Beatriz Roldan, Giersig, Michael and Brinkert, Katharina (2022) Releasing the bubbles : nanotopographical electrocatalyst design for efficient photoelectrochemical hydrogen production in microgravity environment. Advanced Science . 2105380. doi:10.1002/advs.202105380 ISSN 2198-3844.

Akbar, Rahmad, Bashour, Habib, Rawat, Puneet, Robert, Philippe A., Smorodina, Eva, Cotet, Tudor-Stefan, Flem-Karlsen, Karine, Frank, Robert, Mehta, Brij Bhushan, Vu, Mai Ha, Zengin, Talip, Gutierrez-Marcos, José F., Lund-Johansen, Fridtjof, Andersen, Jan Terje and Greiff, Victor (2022) Progress and challenges for the machine learning-based design of fit-for-purpose monoclonal antibodies. mAbs, 14 (1). 2008790. doi:10.1080/19420862.2021.2008790 ISSN 1942-0870.

Al-Falou, A. A. and Ball, Robin (2000) The 3-D weight functions for a quasi-static planar crack. International Journal of Solids and Structures, Vol.37 (No.37). pp. 5079-5096. doi:10.1016/S0020-7683(99)00061-X ISSN 0020-7683.

Al-Falou, A. A. and Ball, Robin (2000) Crack propagation in heterogeneous media. International Journal of Solids and Structures, Vol.37 (No.3). pp. 461-475. doi:10.1016/S0020-7683(99)00016-5 ISSN 0020-7683.

Al-Hajjaj, A. A., Zamora, B., Bavykin, D. V., Shah, Akeel A., Walsh, F. C. and Reguera, E. (2012) Sorption of hydrogen onto titanate nanotubes decorated with a nanostructured Cd3[Fe(CN)6]2 Prussian Blue analogue. International Journal of Hydrogen Energy, Vol.37 (No.1). pp. 318-326. doi:10.1016/j.ijhydene.2011.09.094 ISSN 0360-3199.

Al-Salem, S. M., Lettieri, P. and Baeyens, Jan (2009) Kinetics and product distribution of end of life tyres (ELTs) pyrolysis: a novel approach in polyisoprene and SBR thermal cracking. Journal of Hazardous Materials, Vol.172 (No.2-3). pp. 1690-1694. doi:10.1016/j.jhazmat.2009.07.127 ISSN 0304-3894.

Albrecht, Thomas, Dedner, Andreas, Lüthi, Marcel and Vetter, Thomas (2013) Finite element surface registration incorporating curvature, volume preservation, and statistical model information. Computational and Mathematical Methods in Medicine, Volume 2013 (Article number 674273). pp. 1-14. doi:10.1155/2013/674273 ISSN 1748-670X.

Alkan, Bugra and Harrison, Robert (2019) A virtual engineering based approach to verify structural complexity of component-based automation systems in early design phase. Journal of Manufacturing Systems, 53 . pp. 18-31. doi:10.1016/j.jmsy.2019.09.001 ISSN 0278-6125.

Alkan, Bugra and Kaniappan Chinnathai, Malarvizhi (2021) Performance comparison of recent population-based metaheuristic optimisation algorithms in mechanical design problems of machinery components. Machines, 9 (12). e341. doi:10.3390/machines9120341 ISSN 2075-1702.

Alkan, Bugra, Vera, Daniel A., Ahmad, Bilal and Harrison, Robert (2017) A method to assess assembly complexity of industrial products in early design phase. IEEE Access, 6 . 989 -999. doi:10.1109/ACCESS.2017.2777406 ISSN 2169-3536.

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614 ISSN 1354-2575.

Alonso-Martín, Pablo-Ramsés, Montes, Ignacio and Miranda, Enrique (2023) Distortion models for estimating human error probabilities. Safety Science, 157 . 105915. doi:10.1016/j.ssci.2022.105915 ISSN 0925-7535.

Alqahtani, Mnerh, Grigorio, Leonardo and Grafke, Tobias (2022) Extreme events and instantons in Lagrangian passive scalar turbulence models. Physical Review E, 106 (1). 015101. doi:10.1103/physreve.106.015101 ISSN 1539-3755.

Alqurashi, Yousef, Elsherif, Mohamed, Moreddu, Rosalia, Cieslak, Magdalena, Dhaliwal, Hemeth, Essa, Khamis and Butt, Haider (2022) Contact lens-based microchannel rings for detecting ocular hypertension. Applied Sciences, 12 (20). 10661. doi:10.3390/app122010661 ISSN 2076-3417.

Amato, Silvio, Hutchins, David A., Yin, Xiaokang, Ricci, Marco and Laureti, Stefano (2021) Capacitive imaging using fused amplitude and phase information for improved defect detection. NDT & E International, 124 . 102547. doi:10.1016/j.ndteint.2021.102547 ISSN 0963-8695.

Amel, Hoda, Rongong, Jem, Moztarzadeh, Hadi and Hopkinson, Neil (2016) Effect of section thickness on fatigue performance of laser sintered Nylon 12. Polymer Testing, 53 . pp. 204-210. doi:10.1016/j.polymertesting.2016.05.027 ISSN 0142-9418.

Amer, Mohamed, Curry, Nicholas, Hayat, Qamar, Sharma, Rohit, Janik, Vit, Zhang, Xiang, Nottingham, Jon and Bai, Mingwen (2023) Cracking behavior of Gd2Zr2O7/YSZ multi-layered thermal barrier coatings deposited by suspension plasma spray. Coatings, 13 (1). 107. doi:10.3390/coatings13010107 ISSN 2079-6412.

Amri, Mahrez, Clarkson, Guy J. and Walton, Richard I. (2010) Anisotropic thermal expansion of SiO2 and AlPO4 clathrasils with the AST-type structure. Journal of Physical Chemistry C, Vol.114 (No.14). pp. 6726-6733. doi:10.1021/jp100368e ISSN 1932-7447.

Amri, Mahrez and Walton, Richard I. (2009) Negative thermal expansion in the aluminum and gallium phosphate zeotypes with CHA and AEI structure types. Chemistry of Materials, Vol.21 (No.14). pp. 3380-3390. doi:10.1021/cm901140u ISSN 0897-4756.

Anand, G., Ghosh, Swarnava, Zhang, Liwei, Anupam, Angesh, Freeman, Colin L., Ortner, Christoph, Eisenbach, Markus and Kermode, James R. (2022) Exploiting machine learning in multiscale modelling of materials. Journal of The Institution of Engineers (India) : Series D . doi:10.1007/s40033-022-00424-z ISSN 2250-2122. (In Press)

Andrews, Jessica, Bullock, George, Miller, Cheryl A., Booth, Jonathan, Ren, Hong, Kelly, Nicole L., Hanna, John V. and Reaney, Ian M. (2023) Cold sintering of bioglass and bioglass/polymer composites. Journal of the American Ceramic Society, 106 (6). pp. 3396-3409. doi:10.1111/jace.19022 ISSN 0002-7820.

Annis, James W., Fisher, Janet M., Thompsett, David and Walton, Richard I. (2021) Solvothermal synthesis routes to substituted cerium dioxide materials. Inorganics, 9 (6). e40. doi:10.3390/inorganics9060040 ISSN 2304-6740.

Arefi, Hadi H., Corken, Daniel, Tautz, F. Stefan, Maurer, Reinhard J. and Wagner, Christian (2022) Design principles for metastable standing molecules. The Journal of Physical Chemistry C, 126 (15). pp. 6880-6891. doi:10.1021/acs.jpcc.2c01514 ISSN 1932-7455.

Arnalds, Unnar B., Papaioannou, Evangelos Th., Hase, Thomas P. A., Raanaei, Hossein, Andersson, Gabriella, Charlton, Timothy R., Langridge, Sean and Hjorvarsson, Bjorgvin (2010) Magnetic structure and diffracted magneto-optics of patterned amorphous multilayers. Physical Review B (Condensed Matter and Materials Physics), Vol.82 (No.4). Article no. 144434. doi:10.1103/PhysRevB.82.144434 ISSN 1098-0121.

Arnay, Icíar, Serrano, Aída, Braza, Verónica, Cid, Rosalía, Sánchez, Ana M., López-Sánchez, Jesús, Castro, Germán R. and Rubio-Zuazo, Juan (2023) Soft magnetism in single phase Fe3Si thin films deposited on SrTiO3(001) by pulsed laser deposition. Journal of Alloys and Compounds, 947 . 169540. doi:10.1016/j.jallcom.2023.169540 ISSN 0925-8388.

Arnold, Eduardo, Dianati, Mehrdad, de Temple, Robert and Fallah, Saber (2022) Cooperative perception for 3D object detection in driving scenarios using infrastructure sensors. IEEE Transactions on Intelligent Transportation Systems, 23 (3). pp. 1852-1864. doi:10.1109/TITS.2020.3028424 ISSN 1524-9050.

Arshad, Muhammad, Amer, Mohamed, Hayat, Qamar, Janik, Vit, Zhang, Xiang, Moradi, Mahmoud and Bai, Mingwen (2022) High-entropy coatings (HEC) for high-temperature applications : materials, processing, and properties. Coatings, 12 (5). 691. doi:10.3390/coatings12050691 ISSN 2079-6412.

Asadpour, Ghasem, Asadi, Payam, Garcia, Reyes and Hajirasouliha, Iman (2023) A novel stochastic linearization technique for structures with nonlinear fluid viscous dampers including soil-structure interaction. Journal of Building Engineering, 72 . 106668. doi:10.1016/j.jobe.2023.106668 ISSN 2352-7102.

Ashworth, Sam, Fairclough, J. Patrick A., Meredith, James O., Takikawa, Yoshihiro and Kerrigan, Kevin (2022) Effects of tool coating and tool wear on the surface quality and flexural strength of slotted CFRP. Wear, 498-499 . 204340. doi:10.1016/j.wear.2022.204340 ISSN 0043-1648.

Asmild, Mette, Holvad, Torben, Hougaard, Jens Leth and Kronborg, Dorte (2009) Railway reforms: do they influence operating efficiency? Transportation, Vol.36 (No.5). pp. 617-638. doi:10.1007/s11116-009-9216-x ISSN 0049-4488.

Assadi-Langroudi, Arya, O’Kelly, Brendan C., Barreto, Daniel, Cotecchia, Federica, Dicks, Henry, Ekinci, Abdullah, Garcia, Fernando E., Harbottle, Michael, Tagarelli, Vito, Jefferson, Ian, Maghoul, Pooneh, Masoero, Enrico, El Mountassir, Gráinne, Muhunthan, Balasingam, Geng, Xueyu , Ghadr, Soheil, Mirzababaei, Mehdi, Mitrani, Helen and van Paassen, Leon (2022) Recent advances in Nature-Inspired Solutions for Ground Engineering (NiSE). International Journal of Geosynthetics and Ground Engineering, 8 (1). 3. doi:10.1007/s40891-021-00349-9 ISSN 2199-9260.

Astolfi, Lorenzo, Hutchins, David A., Watson, Richard L., Thomas, Peter J., Ricci, Marco, Nie, Luzhen, Freear, Steven, Cooper, Timothy P., Clare, Adam T. and Laureti, Stefano (2022) Optimised polymer trapped-air lenses for ultrasound focusing in water exploiting Fabry-Pérot resonance. Ultrasonics, 125 . 106781. doi:10.1016/j.ultras.2022.106781 ISSN 0041-624X.

Atari, M. I., Chappell, M. J. (Michael J.), Errington, Rachel J., Smith, Paul J. and Evans, Neil D. (2011) Kinetic modelling of the role of the aldehyde dehydrogenase enzyme and the breast cancer resistance protein in drug resistance and transport. Computer Methods and Programs in Biomedicine, Vol.104 (No.2). pp. 93-103. doi:10.1016/j.cmpb.2010.06.008 ISSN 01692607.

Ateş, Ergun and Barnes, Stuart (2012) The effect of elevated temperature curing treatment on the compression strength of composites with polyester resin matrix and quartz filler. Materials & Design, Vol.34 . pp. 435-443. doi:10.1016/j.matdes.2011.08.042 ISSN 0264-1275.

Atherton, M. A. and Bates, R. A. (2000) Bond graph analysis in robust engineering design. Quality and Reliability Engineering International, 16 (4). pp. 325-335. doi:10.1002/1099-1638(200007/08)16:4&lt;325::AID-QRE435&gt;3.0.CO;2-K ISSN 0748-8017.

Atkins, Christophe J., Seow, David, Burns, Gerard, Town, James, Hand, Rachel A., Lester, Daniel, Cameron, Neil R., Haddleton, David M. and Eissa, Ahmed M. (2020) Branched macromonomers from catalytic chain transfer polymerisation (CCTP) as precursors for emulsion-templated porous polymers. Polymer Chemistry, 11 (23). pp. 3841-3848. doi:10.1039/d0py00539h ISSN 1759-9954.

Avila, K., Moxey, David C., de Lozar, A., Avila, M., Barkley, Dwight and Hof, B. (2011) The onset of turbulence in pipe flow. Science, Vol.333 (No.6039). pp. 192-196. doi:10.1126/science.1203223 ISSN 0036-8075.

Avila, Marc, Barkley, Dwight and Hof, Björn (2023) Transition to turbulence in pipe flow. Annual Review of Fluid Mechanics, 55 (1). pp. 575-602. doi:10.1146/annurev-fluid-120720-025957 ISSN 1545-4479.

Awan, Ruqayya, Raza, Shan-e-Ahmed, Lotz, Johannes, Weiss, Nick and Rajpoot, Nasir M. (2023) Deep feature based cross-slide registration. Computerized Medical Imaging and Graphics, 104 . 102162. doi:10.1016/j.compmedimag.2022.102162 ISSN 0895-6111.

Azhar, Faisal and Tjahjadi, Tardi (2014) Significant body point labeling and tracking. IEEE Transactions on Cybernetics, Volume 44 (Number 9). pp. 1673-1685. doi:10.1109/TCYB.2014.2303993 ISSN 2168-2267.

Babu, Manoj, Franciosa, Pasquale and Ceglarek, Dariusz (2019) Spatio-temporal adaptive sampling for effective coverage measurement planning during quality inspection of free form surfaces using robotic 3D optical scanner. Journal of Manufacturing Systems, 53 . pp. 93-108. doi:10.1016/j.jmsy.2019.08.003 ISSN 0278-6125.

Babu, Manoj, Franciosa, Pasquale, Shekhar, Prashant and Ceglarek, Dariusz (2023) Object shape error modelling and simulation during early design phase by morphing Gaussian random fields. Computer-Aided Design, 158 . 103481. doi:10.1016/j.cad.2023.103481 ISSN 0010-4485.

Bach, Benjamin, Freeman, Euan, Abdul-Rahman, Alfie, Turkay, Cagatay, Khan, Saiful, Fan, Yulei and Chen, Min (2023) Dashboard design patterns. IEEE Transactions on Visualization and Computer Graphics, 29 (1). pp. 342-352. doi:10.1109/TVCG.2022.3209448 ISSN 1077-2626.

Bagheri, Meghdad, Mousavi Nezhad, Mohaddeseh and Rezania, Mohammad (2020) A CRS oedometer cell for unsaturated and non-isothermal tests. Geotechnical Testing Journal, 43 (1). pp. 20-37. doi:10.1520/GTJ20180204 ISSN 0149-6115.

Bagheri, Meghdad and Rezania, Mohammad (2022) Effect of soil moisture evaporation rate on dynamic measurement of water retention curve with high capacity tensiometer. International Journal of Geomechanics, 22 (3). 04021301. doi:10.1061/(ASCE)GM.1943-5622.0002291 ISSN 1532-3641.

Bagheri, Meghdad, Rezania, Mohammad and Mousavi Nezhad, Mohaddeseh (2018) Cavitation in high-capacity tensiometers : effect of water reservoir surface roughness. Geotechnical Research, 5 (2). pp. 81-95. doi:10.1680/jgere.17.00016 ISSN 2052-6156.

Bagheri, Meghdad, Rezania, Mohammad and Mousavi Nezhad, Mohaddeseh (2019) Rate dependency and stress relaxation of unsaturated clays. International Journal of Geomechanics, 19 (12). 04019128. doi:10.1061/(ASCE)GM.1943-5622.0001507 ISSN 1532-3641.

Bai, Ou, Jamshidi, Jafar, Kiraci, Ercihan, Williams, M. A. and Galetto, Maurizio (2017) Measurement strategy impact on dimensional inspection by portable camera-based measuring systems. Precision Engineering, 47 . pp. 516-527. doi:10.1016/j.precisioneng.2016.10.007 ISSN 0141-6359.

Baier, Waltraud, Donnelly, Michael, Payne, Mark and Williams, M. A. (Mark A.) (2020) A holistic multi-scale approach to using 3D scanning technology in accident reconstruction. Journal of Forensic Sciences . doi:10.1111/1556-4029.14405 ISSN 0022-1198.

Baioni, Elisa, Mousavi Nezhad, Mohaddeseh, Porta, Giovanni Michele and Guadagnini, Alberto (2021) Modeling solute transport and mixing in heterogeneous porous media under turbulent flow conditions. Physics of Fluids, 33 (10). 106604. doi:10.1063/5.0065734 ISSN 1070-6631.

Baker, G. W. C., Li, Fan, Dai, Tianxiang, Renz, A. B., Zhang, L., Qi, Yunyi, Shah, Vishal, Mawby, Philip A., Antoniou, Marina and Gammon, Peter M. (2022) A study of 4H-SiC semi-superjunction rectifiers for practical realisation. Materials Science Forum, 1062 . pp. 514-518. doi:10.4028/p-cxd7z3 ISSN 1662-9752.

Baker, Ysobel R., Chen, Jinfeng, Brown, Jason, El-Sagheer, Afaf H., Wiseman, Philip, Johnson, Errin, Goddard, Paul and Brown, Tom (2018) Preparation and characterization of manganese, cobalt and zinc DNA nanoflowers with tuneable morphology, DNA content and size. Nucleic Acids Research, 46 (15). pp. 7495-7505. doi:10.1093/nar/gky630 ISSN 1362-4962.

Balart, MarÍa J., Hao, Xinjiang and Davis, Claire (2022) Automated SEM/EDS analysis for assessment of trace cross-contamination in 316L stainless steel powders. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 53 . pp. 345-358. doi:10.1007/s11661-021-06474-4 ISSN 1073-5623.

(2008) NANOSIL network of excellence-silicon-based nanostructures and nanodevices for long-term nanoelectronics applications. Materials Science in Semiconductor Processing, Vol.11 (No.5-6 Sp. Iss. SI). pp. 148-159. doi:10.1016/j.mssp.2008.09.017 ISSN 1369-8001.

Ball, Thomasina and Balmforth, Neil J. (2021) Viscoplastic plates. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2254). 20210509. doi:10.1098/rspa.2021.0509 ISSN 1471-2946.

Bandi, Bharath, Santillana, Begona, Tiekink, Wouter, Koura, Nadia, Williams, Mark A. and Srirangam, Prakash (2020) 2D automated SEM and 3D X-ray computed tomography study on inclusion analysis of steels. Ironmaking & Steelmaking, 47 (1). pp. 47-50. doi:10.1080/03019233.2019.1652437 ISSN 0301-9233.

Bandi, Bharath, Slater, Carl, Farrugia, Didier and Davis, Claire (2022) Development of desirable fine ferrite grain size and random second phase dual-phase steel microstructures using composition and/or processing modifications. Metals, 12 (7). 1158. doi:10.3390/met12071158 ISSN 2075-4701.

Bandi, Bharath, Van Krevel, Joost and Srirangam, Prakash (2022) Interaction between ferrite recrystallization and austenite formation in dual-phase steel manufacture. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 53 . pp. 1379-1393. doi:10.1007/s11661-022-06597-2 ISSN 1073-5623.

Bandi, M. M., Akella, V. S., Singh, D. K., Singh, R. S. and Mandre, S. (2017) Hydrodynamic signatures of stationary marangoni-driven surfactant transport. Physical Review Letters, 119 (26). 264501 . doi:10.1103/PhysRevLett.119.264501 ISSN 0031-9007.

Banerjee, Samya, Omlor, Andreas, Wolny, Juliusz A., Han, Yisong, Lermyte, Frederik, Godfrey, Amy, O'Connor, Peter B., Schünemann, Volker, Danaie, Mohsen and Sadler, Peter J. (2019) Generation of maghemite nanocrystals from iron–sulfur centres. Dalton Transactions, 48 (26). pp. 9564-9569. doi:10.1039/C9DT00514E ISSN 1477-9226.

Barari, Amin, Zeng, Xiangwu, Rezania, Mohammad and Ibsen, Lars Bo (2021) Three-dimensional modeling of monopiles in sand subjected to lateral loading under static and cyclic conditions. Geomechanics and Engineering, 26 (2). pp. 175-190. doi:10.12989/gae.2021.26.2.175 ISSN 2092-6219.

Bardanis, M., Russell, Adrian, Vo, Thanh Liem, Ayala, Juan, Wang, Yanzhi, Reid, David and Fourie, Andy (2023) The influences of partial saturation on cone penetration tests in silty gold tailings. E3S Web of Conferences, 382 . 16007. doi:10.1051/e3sconf/202338216007 ISSN 2267-1242.

Barker, Xavier E. Ramirez, Costa, Goncalo, Stantchev, Rayko I., Hernandez-Serrano, Arturo I., Nurumbetov, Gabit, Haddleton, David M. and Pickwell-MacPherson, Emma (2023) Monitoring the terahertz response of skin beneath transdermal drug delivery patches using sparse deconvolution. IEEE Transactions on Terahertz Science and Technology . doi:10.1109/TTHZ.2023.3292546 ISSN 2156-342X. (In Press)

Barnes, Stuart, Nash, Michael J. and Kwok, Y. K. (2003) Surface modification of powder metallurgy components with a direct diode laser. Journal of Engineering Materials and Technology, Volume 125 (Number 4). pp. 372-377. doi:10.1115/1.1605111 ISSN 0094-4289.

Barnes, Stuart, Pashby, I. R. and Hashim, A. B. (1999) Effect of heat treatment on the drilling performance of aluminium/SiC MMC. Applied Composite Materials, Volume 6 (Number 2). pp. 121-138. doi:10.1023/A:1008853525975 ISSN 0929-189X.

Barnes, Stuart, Timms, N., Bryden, B. G. and Pashby, I. R. (2003) High power diode laser cladding. Journal of Materials Processing Technology, Volume 138 (Number 1-3). pp. 411-416. doi:10.1016/S0924-0136(03)00109-2 ISSN 0924-0136.

Barney, E. R., Hannon, A. C., Holland, Diane, Winslow, D., Rijal, B., Affatigato, M. and Feller, S. A. (2007) Structural studies of lead aluminate glasses. Journal of Non-Crystalline Solids, Vol.353 (No.18-21). pp. 1741-1747. doi:10.1016/j.jnoncrysol.2007.02.007 ISSN 0022-3093.

Barrera, O., Bombac, D., Chen, Y., Daff, T. D., Galindo-Nava, E., Gong, P., Haley, D., Horton, R., Katzarov, I., Kermode, James R., Liverani, C., Stopher, M. and Sweeney, F. (2018) Understanding and mitigating hydrogen embrittlement of steels : a review of experimental, modelling and design progress from atomistic to continuum. Journal of Materials Science, 53 . pp. 6251-6290. doi:10.1007/s10853-017-1978-5 ISSN 0022-2461.

Baskerville, Richard and Nandhakumar, Joe (2007) Activating and perpetuating virtual teams: now that we're mobile, where do we go? IEEE Transactions on Professional Communication, Vol.50 (No.1). pp. 17-34. doi:10.1109/TPC.2006.890849 ISSN 0361-1434.

Basturk, S. Bahar, Dancer, Claire E. J. and McNally, Tony (2021) Dielectric performance of composites of BaTiO 3 and polymers for capacitor applications under microwave frequency. Journal of Applied Polymer Science, 138 (22). 50521. doi:10.1002/app.50521 ISSN 0021-8995.

Bates, D., Smith, G. F., Lu, Dawei and Hewit, J. (2000) Rapid thermal non-destructive testing of aircraft components. Composites Part B: Engineering, Vol.31 (No.3). pp. 175-185. doi:10.1016/S1359-8368(00)00005-6 ISSN 1359-8368.

Bavelis, Konstantinos and Mias, Christos (2012) Finite-element time-domain modelling of cylinders with angular periodicity. IET Microwaves, Antennas & Propagation, Vol.6 (No.4). pp. 435-442. doi:10.1049/iet-map.2011.0152 ISSN 1751-8733.

Bavelis, Konstantinos and Mias, Christos (2012) On the accuracy of the vector fitting approximation of a cylinder nonreflecting boundary kernel. Microwave and Optical Technology Letters, Vol.54 (No.2). pp. 277-282. doi:10.1002/mop.26555 ISSN 0895-2477.

Bavelis, Konstantinos and Mias, Christos (2010) Vector fitting realisation of exact time domain modal nonreflecting boundary condition. Electronics Letters, Vol.46 (No.11). pp. 760-761. doi:10.1049/el.2010.1119 ISSN 0013-5194.

Bavelis, Konstantinos and Mias, Christos (2012) A sparse-matrix methodology for finite element time domain modal non-reflecting boundary condition simulations. IET Microwaves, Antennas & Propagation, Volume 6 (Number 8). pp. 945-955. doi:10.1049/iet-map.2011.0057 ISSN 1751-8733.

Bayton, D. A. F., Long, R. and Fourlaris, G. (2009) Dynamic responses of connections in road safety barriers. Materials & Design, Vol.30 (No.3). pp. 635-641. doi:10.1016/j.matdes.2008.05.048 ISSN 0264-1275.

Beaumont, Richard Adrian, Masters, Iain, Das, Abhishek, Lucas, Steve, Thanikachalam, Arunn and Williams, D. K. (2021) Methodology for developing a macro finite element model of lithium‐ion pouch cells for predicting mechanical behaviour under multiple loading conditions. Energies, 14 (7). 1921. doi:10.3390/en14071921

Beeravolu, Akhil Reddy, Babu, Nagumothu Kishore, Talari, Mahesh Kumar, Rehman, Ateekh Ur and Srirangam, Prakash (2023) Influence of microstructure and mechanical properties of dissimilar rotary friction welded inconel to stainless steel joints. Materials, 16 (8). 3049. doi:10.3390/ma16083049 ISSN 1996-1944.

Bektas, Oguz, Jones, Jeffrey Alun, Sankararaman, Shankar, Roychoudhury, Indranil and Goebel, Kai (2019) A neural network filtering approach for similarity-based remaining useful life estimation. The International Journal of Advanced Manufacturing Technology, 101 . pp. 87-103. doi:10.1007/s00170-018-2874-0 ISSN 0268-3768.

Bennett, J. R. J., Škoro, G. P., Back, J. J., Brooks, S. J. (Stephen J.), Edgecock, T. R., Gray, S. A. (Steve A.), McFarland, A. J. (Adrian J.), Rodgers, K. J. and Booth, C. N. (2011) Lifetime and strength tests of tantalum and tungsten under thermal shock for a Neutrino Factory target. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol.646 (No.1). pp. 1-6. doi:10.1016/j.nima.2011.03.036 ISSN 0168-9002.

Bentley, Cameron Luke, Kang, Minkyung, Bukola, Saheed, Creager, Stephen E. and Unwin, Patrick R. (2022) High-resolution ion-flux imaging of proton transport through graphene|nafion membranes. ACS Nano, 16 (4). pp. 5233-5245. doi:10.1021/acsnano.1c05872 ISSN 1936-086X.

Bentsen, Thomas, Harte, James M. and Dau, Torsten (2011) Human cochlear tuning estimates from stimulus-frequency otoacoustic emissions. The Journal of the Acoustical Society of America, Vol.129 (No.6). pp. 3797-3807. doi:10.1121/1.3575596 ISSN 0001-4966.

Benzie, John A. H., Gibelli, Livio, Enright, Ryan, Sprittles, James E., Lockerby, Duncan A. and Emerson, David R. (2021) Evaporation from arbitrary nanoporous membrane configurations : an effective evaporation coefficient approach. Physics of Fluids, 33 (3). 032022 . doi:10.1063/5.0046174 ISSN 1070-6631.

Berhanu, Sarah, Tariq, Farid, Jones, T. S. (Tim S.) and McComb, David W. (2010) Three-dimensionally interconnected organic nanocomposite thin films: implications for donor-acceptor photovoltaic applications. Journal of Materials Chemistry, Vol.20 (No.37). pp. 8005-8009. doi:10.1039/c0jm01030h ISSN 0959-9428.

Bertoncello, Paolo, Ciani, Ilenia, Li, Fei and Unwin, Patrick R. (2006) Measurement of apparent diffusion coefficients within ultrathin Nafion Langmuir-Schaefer films: Comparison of a novel scanning electrochemical microscopy approach with cyclic voltammetry. LANGMUIR, 22 (25). pp. 10380-10388. doi:10.1021/la061214i ISSN 0743-7463.

Bertoncello, Paolo, Ciani, Ilenia, Marenduzzo, Davide and Unwin, Patrick R. (2007) Kinetics of solute partitioning into ultrathin Nafion films on electrode surfaces: Theory and experimental measurement. Journal of Physical Chemistry C, Vol.111 (No.1). pp. 294-302. doi:10.1021/jp0653981 ISSN 1932-7447.

Bertoncello, Paolo, Wilson, Neil R. and Unwin, Patrick R. (2007) One-step formation of ultra-thin chemically functionalized redox-active Langmuir-Schaefer Nafion films. Soft Matter, Volume 3 (Number 10). pp. 1300-1307. doi:10.1039/b709278d ISSN 1744-683X.

Besenhard, Maximilian O., Storozhuk, Liudmyla, LaGrow, Alec. P., Panariello, Luca, Maney, Adam, Pal, Sayan, Kiefer, Céline, Mertz, Damien, Tung, Le Duc, Lees, Martin R., Thanh, Nguyen Thi Kim and Gavriilidis, Asterios (2023) High temperature flow synthesis of iron oxide nanoparticles : size tuning via reactor engineering. Chemical Engineering Journal, 473 . 144542. doi:10.1016/j.cej.2023.144542 ISSN 1385-8947.

Besharatian, Boshra, Tajmir Riahi, Hossein, Garcia, Reyes and Hajirasouliha, Iman (2023) Particle swarm optimization of friction tuned mass dampers subjected to ground motion records. Soil Dynamics and Earthquake Engineering, 172 . 107995. doi:10.1016/j.soildyn.2023.107995 ISSN 0267-7261.

Bhagat, Rohit, Dye, D., Raghunathan, S. L., Talling, R. J., Inman, D. (Douglas), Jackson, B. K., Rao, K. K. (Kartik K.) and Dashwood, R. J. (2010) In situ synchrotron diffraction of the electrochemical reduction pathway of TiO2. Acta Materialia, Vol.58 (No.15). pp. 5057-5062. doi:10.1016/j.actamat.2010.05.041 ISSN 1359-6454.

Bhagat, Rohit, Jackson, M., Inman, D. and Dashwood, R. J. (2008) Production of Ti-W alloys from mixed oxide precursors via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.156 (No.1). E1-E7. doi:10.1149/1.2999340 ISSN 0013-4651.

Bhagat, Rohit, Jackson, M., Inman, D. and Dashwood, R. J. (2008) The production of Ti–Mo alloys from mixed oxide precursors via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.155 (No.6). E63-E69. doi:10.1149/1.2904454 ISSN 0013-4651.

Bhalerao, Abhir and Reynolds, Gregory (2014) Ruler detection for autoscaling forensic images. International Journal of Digital Crime and Forensics, Volume 6 (Number 1). pp. 9-27. doi:10.4018/ijdcf.2014010102 ISSN 1941-6210.

Bhalodiya, Jayendra Maganbhai, Palit, Arnab, Ferrante, Enzo, Tiwari, Manoj K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, Mark A. (2019) Hierarchical template matching for 3D myocardial tracking and cardiac strain estimation. Scientific Reports, 9 . 12450. doi:10.1038/s41598-019-48927-2 ISSN 2045-2322.

Bhogaraju, Sri Krishna, Conti, Fosca, Kotadia, Hiren, Keim, Simon, Tetzlaff, Ulrich and Elger, Gordon (2020) Novel approach to copper sintering using surface enhanced brass micro flakes for microelectronics packaging. Journal of Alloys and Compounds, 844 . 156043. doi:10.1016/j.jallcom.2020.156043 ISSN 0925-8388.

Bhowal, Sayantika, O'Neill, Daniel J., Fechner, Michael, Spaldin, Nicola A., Staub, Urs, Duffy, Jon A. and Collins, Stephen P. (2022) Anti-symmetric Compton scattering in LiNiPO4 : towards a direct probe of the magneto-electric multipole moment [version 2; peer review: 3 approved]. Open Research Europe, 1 . p. 132. doi:10.12688/openreseurope.13863.2 ISSN 2732-5121.

Bianchini, Federico, Kermode, James R. and De Vita, Alessandro (2016) Modelling defects in Ni-Al with EAM and DFT calculations. Modelling and Simulation in Materials Science and Engineering, 24 (4). 045012. doi:10.1088/0965-0393/24/4/045012 ISSN 0965-0393.

Bie, Pingping, Liu, Peng, Yu, Long, Li, Xiaoxi, Chen, Ling and Xie, Fengwei (2013) The properties of antimicrobial films derived from poly(lactic acid)/starch/chitosan blended matrix. Carbohydrate Polymers, 98 (1). pp. 959-966. doi:10.1016/j.carbpol.2013.07.004 ISSN 0144-8617.

Bing, G. J. A. and Wallbank, J. (2008) The effect of using a sprung stripper in sheet metal cutting. Journal of Materials Processing Technology, Vol.200 (No.1-3). pp. 176-184. doi:10.1016/j.jmatprotec.2007.09.018 ISSN 0924-0136.

Bird, Tobias A., Wilkinson, Mark G. L., Keen, David A., Smith, Ronald I., Bristowe, Nicholas C., Dove, Martin T., Phillips, Anthony E. and Senn, Mark S. (2021) Soft-mode anisotropy in the negative thermal expansion material ReO3. Physical Review B (Condensed Matter and Materials Physics), 104 (21). 214102. doi:10.1103/PhysRevB.104.214102 ISSN 1098-0121.

Biswas, Prasenjit, Kundu, Amrik, Kotadia, Hiren, Mallik, Archana and Das, Sanjeev (2020) Design and manufacturing of a novel continuous casting technique for the addition of ceramic particulate reinforcement, alloying elements and grain refiners in Al-system. CIRP Journal of Manufacturing Science and Technology, 31 . pp. 342-350. doi:10.1016/j.cirpj.2020.06.009 ISSN 1755-5817.

Biswas, Prasenjit, Patel, Deepak, Kumar, Anil, Bagani, Aaryan, Soni, Pranjal, Kotadia, Hiren and Das, Sanjeev (2020) A study on interfacial activities between Nb and liquid Al in static and dynamic condition. Materials Today: Proceedings, 27 (3). pp. 2880-2885. doi:10.1016/j.matpr.2020.01.611 ISSN 2214-7853.

Bloodworth, Alan G., Cao, J. and Xu, M. (2012) Numerical modelling of shear behaviour of reinforced concrete pile caps. Journal of Structural Engineering, 138 (6). pp. 708-717. doi:10.1061/(ASCE)ST.1943-541X.0000499 ISSN 0733-9445.

Bloodworth, Alan G. and Houlsby, Guy T. (2017) Analysis of pre-vault tunnelling interaction with buildings. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 170 (2). pp. 99-116. doi:10.1680/jgeen.15.00176 ISSN 1353-2618.

Bloodworth, Alan G. and Su, Jiang (2018) Numerical analysis and capacity evaluation of composite sprayed concrete lined tunnels. Underground Space, 3 (2). pp. 87-108. doi:10.1016/j.undsp.2017.12.001 ISSN 2467-9674.

Bo, Weihao, Liu, Jie, Fan, Xijian, Tjahjadi, Tardi, Ye, Qiaolin and Fu, Liyong (2022) BASNet : burned area segmentation network for real-time detection of damage maps in remote sensing images. IEEE Transactions on Geoscience and Remote Sensing, 60 . p. 1. doi:10.1109/TGRS.2022.3197647 ISSN 0196-2892.

Bon, Stefan Antonius Franciscus, Cauvin, Severine and Colver, Patrick J. (2007) Colloidosomes as micron-sized polymerisation vessels to create supracolloidal interpenetrating polymer network reinforced capsules. Soft Matter, Volume 3 (Number 2). pp. 194-199. doi:10.1039/b612066k ISSN 1744-683X.

Bon, Stefan Antonius Franciscus and Chen, Tao (2007) Pickering stabilization as a tool in the fabrication of complex nanopatterned silica microcapsules. LANGMUIR, 23 (19). pp. 9527-9530. doi:10.1021/la7016769 ISSN 0743-7463.

Bon, Stefan Antonius Franciscus and Colver, Patrick J. (2007) Pickering miniemulsion polymerization using Laponite clay as a stabilizer. Langmuir, Vol.23 (No.16). pp. 8316-8322. doi:10.1021/la701150q ISSN 0743-7463.

Bonfanti, Mirko, Balabani, Stavroula, Greenwood, John P., Puppala, Sapna, Homer-Vanniasinkam, Shervanthi and Díaz-Zuccarini, Vanessa (2017) Computational tools for clinical support : a multi-scale compliant model for haemodynamic simulations in an aortic dissection based on multi-modal imaging data. Journal of The Royal Society Interface, 14 (136). 20170632. doi:10.1098/rsif.2017.0632 ISSN 1742-5662.

Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2015) Designing tunnel support in jointed rock masses via the DEM. Rock Mechanics and Rock Engineering, 48 (2). pp. 603-632. doi:10.1007/s00603-014-0579-8 ISSN 0723-2632.

Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2012) A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, Vol.44 . pp. 73-82. doi:10.1016/j.compgeo.2012.03.012 ISSN 0266-352X.

Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2013) A new contact detection algorithm for three-dimensional non-spherical particles. Powder technology, 248 . pp. 94-102. doi:10.1016/j.powtec.2012.12.040 ISSN 0032-5910.

Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2015) A new rock slicing method based on linear programming. Computers and geotechnics, 65 . pp. 12-29. doi:10.1016/j.compgeo.2014.11.007 ISSN 0266-352X.

Booth, Joshua, Young, Robert A., Richards Gonzales, Andrés N., Meakin, Zachary, Preuss-Weber, Corinna M., Jaggers, Ross W. and Bon, Stefan Antonius Franciscus (2021) Thermoresponsive icy road sign by light scattering and enhanced fluorescence. Journal of Materials Chemistry C, 9 (22). pp. 7174-7185. doi:10.1039/d1tc01189h ISSN 2050-7534.

Borg, Matthew K., Lockerby, Duncan A. and Reese, Jason M. (2015) A hybrid molecular–continuum method for unsteady compressible multiscale flows. Journal of Fluid Mechanics, 768 . pp. 388-414. doi:10.1017/jfm.2015.83 ISSN 0022-1120.

Borzooei, Sina, Amerlinck, Youri, Panepinto, Deborah, Abolfathi, Soroush, Nopens, Ingmar, Scibilia, Gerardo, Meucci, Lorenza and Chiara Zanetti, Maria (2020) Energy optimization of a wastewater treatment plant based on energy audit data : small investment with high return. Environmental Science and Pollution Research, 27 . pp. 17972-17985. doi:10.1007/s11356-020-08277-3 ISSN 0944-1344.

Boscato, Giosuè, Casalegno, Carlo, Russo, S. and Mottram, J. Toby (2014) Buckling of built-up columns of pultruded fiber-reinforced polymer C-sections. Journal of Composites for Construction, 18 (4). 04013050. doi:10.1061/(ASCE)CC.1943-5614.0000453 ISSN 1090-0268.

Boughanem, S., Jesson, D. A., Mulheron, M. J., Smith, P. A., Eddie, Colin Michael, Psomas, S. and Rimes, Martin (2015) Tensile characterisation of thick sections of Engineered Cement Composite (ECC) materials. Journal of Materials Science, 50 (2). doi:10.1007/s10853-014-8649-6 ISSN 0022-2461.

Bowyer, Jack E., LC. de los Santos, Emmanuel, Styles, Kathryn, Fullwood, Alex, Corre, Christophe and Bates, Declan (2017) Modeling the architecture of the regulatory system controlling methylenomycin production in Streptomyces coelicolor. Journal of Biological Engineering, 11 (1). 30. doi:10.1186/s13036-017-0071-6 ISSN 1754-1611.

Boyes, Hugh and Watson, Tim (2022) Digital twins : an analysis framework and open issues. Computers in Industry, 143 . 103763. doi:10.1016/j.compind.2022.103763 ISSN 2049-4297.

Brand, Samuel, Ball, Robin and Nicodemi, Mario (2011) Stochastic transitions and jamming in granular pipe flow. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), Vol.83 (No.3). Article 031309. doi:10.1103/PhysRevE.83.031309 ISSN 1539-3755.

Breeze, Ben, Meara, C. J., Wu, X. X., Michaels, C. P., Gupta, R., Diggle, P. L., Dale, M. W., Cann, B. L., Ardon, T., D'Haenens-Johansson, U. F. S., Friel, I., Rayson, M. J., Briddon, P. R., Goss, J. P., Newton, Mark E. and Green, Ben L. (2020) Doubly charged silicon vacancy center, Si-N complexes, and photochromism in N and Si codoped diamond. Physical Review B (Condensed Matter and Materials Physics), 101 (18). 184115 . doi:10.1103/PhysRevB.101.184115 ISSN 1098-0121.

Brendel, Johannes C., Sanchis, Joaquin, Catrouillet, Sylvain, Czuba, Ewa, Chen, Moore Z., Long, Benjamin M., Nowell, Cameron, Johnston, Angus P. R., Jolliffe, Katrina A. and Perrier, Sébastien (2018) Secondary self-assembly of supramolecular nanotubes into tubisomes and their activity on cells. Angewandte Chemie International Edition, 57 (51). pp. 16678-16682. doi:10.1002/anie.201808543 ISSN 1433-7851.

Brew, J. S. and Lewis, W. J. (Wanda J.) (2007) Free hanging membrane model for shell structures. International Journal for Numerical Methods in Engineering, Vol.71 (No.13). pp. 1513-1533. doi:10.1002/nme.1976 ISSN 0029-5981.

Brew, J. S. and Lewis, W. J. (Wanda J.) (2007) Tension membranes modelled by curvi-linear bicubic splines. International Journal for Numerical Methods in Engineering, Vol.72 (No.1). pp. 1-21. doi:10.1002/nme.1977 ISSN 0029-5981.

Briscoe, G. and Wilson, Robert A. (1991) Explanations of the demand for labour in the United Kingdom engineering sector. Applied Economics, Volume 23 (Number 5). pp. 913-926. doi:10.1080/00036849100000040 ISSN 0003-6846.

Brockbank, R., Huntley, J. M. and Ball, Robin (1997) Contact force distribution beneath a three-dimensional granular pile. Journal de Physique II , Vol.7 (No.10). pp. 1521-1532. ISSN 1155-4312.

Brons, Jonathan A., Thomas, Peter J. and Pothérat, Alban (2020) Mean flow anisotropy without waves in rotating turbulence. Journal of Fluid Mechanics, 889 . A37. doi:10.1017/jfm.2020.109 ISSN 0022-1120.

Bruce, Tom, van der Meer, J. W. van der, Franco, A. and Pearson, Jonathan M. (2009) Overtopping performance of different armour units for rubble mound breakwaters. Coastal Engineering, Vol.56 (No.2). pp. 166-179. doi:10.1016/j.coastaleng.2008.03.015 ISSN 0378-3839.

Bruno, Giovanni, Efremov, Alexander M., Levandovskiy, Andrey N., Pozdnyakova, Irina, Hughes, Darren J. and Clausen, Bjørn (2010) Thermal and mechanical response of industrial porous ceramics. Materials Science Forum, Vol.652 . pp. 191-196. doi:10.4028/www.scientific.net/MSF.652.191 ISSN 1662-9752.

Bryant, Angus T., Palmer, Patrick R., Santi, Enrico and Hudgins, Jerry L. (2007) Simulation and optimization of diode and insulated gate bipolar transistor interaction in a chopper cell using MATLAB and Simulink. IEEE Transactions on Industry Applications, Vol.43 (No.4). pp. 874-883. doi:10.1109/TIA.2007.900443 ISSN 0093-9994.

Bryant, Angus T., Parker-Allotey, Nii-Adotei and Palmer, Patrick R. (2007) The use of condition maps in the design and testing of power electronic circuits and devices. IEEE Transactions on Industry Applications, Vol.43 (No.4). pp. 902-910. doi:10.1109/TIA.2007.900470 ISSN 0093-9994.

Bryden, B. G. and Pashby, I. R. (1999) Sequential laminated tooling, joined by brazing, for injection moulding. RAPID PROTOTYPING JOURNAL, 5 (2). pp. 89-93. ISSN 1355-2546.

Buckle, L., Coomber, S. D., Ashley, Tim, Jefferson, Paul Harvey, Walker, David, Veal, T. D., McConville, C. F. and Thomas, Pam A. (2009) Growth and characterisation of dilute antimonide nitride materials for long-wavelength applications. Microelectronics Journal, Vol.40 (No.3 Sp. Iss. SI). pp. 399-402. doi:10.1016/j.mejo.2008.06.007 ISSN 0026-2692.

Bugg, Timothy D. H., Williamson, James J. and Rashid, Goran M. M. (2020) Bacterial enzymes for lignin depolymerisation : new biocatalysts for generation of renewable chemicals from biomass. Current Opinion in Chemical Biology, 55 . pp. 26-33. doi:10.1016/j.cbpa.2019.11.007 ISSN 1367-5931.

Bui, Khoa, Wemyss, Alan M., Zhang, Runan, Nguyen, Giao T. M., Vancaeyzeele, Cedric, Vidal, Frederic, Plesse, Cedric and Wan, Chaoying (2022) Tailoring electromechanical properties of natural rubber vitrimers by cross-linkers. Industrial & Engineering Chemistry Research, 61 (25). pp. 8871-8880. doi:10.1021/acs.iecr.2c01229 ISSN 0888-5885.

Bungon, Theodore , Haslam, Carrie J., Damiati, Samar , O'driscoll, Benjamin, Whitley, Toby , Davey, Paul , Siligardi, Giuliano , Charmet, Jérôme and Awan, Shakil A. (2021) Graphene FET sensors for Alzheimer's Disease protein biomarker clusterin detection. Frontiers in Molecular Biosciences, 8 . 651232. doi:10.3389/fmolb.2021.651232 ISSN 2296-889X.

Burdanova, Maria G., Kashtiban, Reza J., Zheng, Y., Xiang, R, Chiashi, S, Woolley, Jack Matthew, Staniforth, Michael, Sakamoto-Rablah, Emily, Xie, Xue, Broome, Matthew R., Sloan, Jeremy, Anisimov, Anton, Kauppinen, Esko, Maruyama, Shigeo and Lloyd-Hughes, James (2020) Ultrafast optoelectronic processes in 1D radial van der Waals heterostructures : carbon, boron nitride, and MoS 2 nanotubes with coexisting excitons and highly mobile charges. Nano Letters, 20 (5). pp. 3560-3567. doi:10.1021/acs.nanolett.0c00504 ISSN 1530-6984.

Burke, Siobhan, Ortner, Christoph and Süli, Endre (2013) An adaptive finite element approximation of a generalized Ambrosio-Tortorelli functional. Mathematical Models and Methods in Applied Sciences, Volume 23 (Number 9). pp. 1663-1697. doi:10.1142/S021820251350019X ISSN 0218-2025.

Burke, Siobhan, Ortner, Christoph and Süli, Endre (2010) An adaptive finite element approximation of a variational model of brittle fracture. SIAM Journal on Numerical Analysis, Volume 48 (Number 3). pp. 980-1012. doi:10.1137/080741033 ISSN 0036-1429.

Burrows, S. E. (Susan E.) and Dixon, S. (2011) Defect detection using a scanning laser source. AIP Conference Proceedings , Vols.30A, 30B (Vol.1335). pp. 249-256. doi:10.1063/1.3591863

Burrows, S. E. (Susan E.), Dixon, S., Li, T. and Almond, Darryl (2010) Combined thermography and noncontact ultrasound inspection techniques using pulsed laser excitation. AIP Conference Proceedings (No.1211). pp. 510-517. doi:10.1063/1.3362437 ISSN 0094-243X.

Burrows, S. E. (Susan E.), Dixon, S., Pickering, S. G., Li, T. (Teng) and Almond, Darryl (2011) Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, Vol.44 (No.7). pp. 589-596. doi:10.1016/j.ndteint.2011.06.001 ISSN 0963-8695.

Burrows, S. E. (Susan E.), Rashed, A., Almond, D. P. and Dixon, S. (2007) Combined laser spot imaging thermography and ultrasonic measurements for crack detection. Nondestructive Testing and Evaluation, Vol.22 (No.2-3). pp. 217-227. doi:10.1080/10589750701448605 ISSN 1058-9759.

Burt, David P., Whyte, W. Murray, Weaver, J. M. R., Glidle, Andrew, Edgeworth, Jonathan P., Macpherson, Julie V. and Dobson, Phillip S. (2009) Effects of metal underlayer grain size on carbon nanotube growth. The Journal of Physical Chemistry Part C: Nanomaterials, Interfaces and Hard Matter, Vol.113 (No.34). pp. 15133-15139. doi:10.1021/jp902117g ISSN 1932-7447.

Burt, David P., Wilson, Neil R., Janus, Ulrich, Macpherson, Julie V. and Unwin, Patrick R. (2008) In-situ atomic force microscopy (AFM) imaging : influence of AFM probe geometry on diffusion to microscopic surfaces. Langmuir, Vol.24 (No.22). pp. 12867-12876. doi:10.1021/la8003323 ISSN 0743-7463.

Busuioc, Sergiu, Gibelli, Livio, Lockerby, Duncan A. and Sprittles, James E. (2020) Velocity distribution function of spontaneously evaporating atoms. Physical Review Fluids, 5 (10). 103401. doi:10.1103/PhysRevFluids.5.103401 ISSN 2469-990X.

Buze, Maciej and Kermode, James R. (2021) Numerical-continuation-enhanced flexible boundary condition scheme applied to mode-I and mode-III fracture. Physical Review E, 103 (3). 033002 . doi:10.1103/PhysRevE.103.033002 ISSN 1539-3755.

Cai, Kunhai, He, Xianbin, Tian, Yanling, Liu, Xianping, Zhang, Dawei and Shirinzadeh, Bijan (2018) Design of a XYZ Scanner for home-made high-speed atomic force microscopy. Microsystem Technologies, 24 (7). pp. 3123-3132. doi:10.1007/s00542-017-3674-4 ISSN 0946-7076.

Cai, Kunhai, Tian, Yanling, Wang, Fujun, Zhang, Dawei and Shirinzadeh, Bijan (2015) Development of a piezo-driven 3-DOF stage with T-shape flexible hinge mechanism. Robotics and Computer-Integrated Manufacturing, 37 . pp. 125-138. doi:10.1016/j.rcim.2015.07.004 ISSN 0736-5845.

Cai, Yuanqiang, Xu, Bin, Cao, Zhigang, Geng, Xueyu and Yuan, Zonghao (2020) Solution of the ultimate bearing capacity at the tip of a pile in inclined rocks based on the Hoek-Brown criterion. International Journal of Rock Mechanics and Mining Sciences, 125 . 104140. doi:10.1016/j.ijrmms.2019.104140 ISSN 1365-1609.

Cai, Zexin, Chen, Faze, Tian, Yanling, Zhang, Dawei, Lian, Zhongxu and Cao, Moyuan (2022) Programmable droplet transport on multi-bioinspired slippery surface with tridirectionally anisotropic wettability. Chemical Engineering Journal, 449 . 137831. doi:10.1016/j.cej.2022.137831 ISSN 1385-8947.

Cain, Rebecca and Jennings, P. A. (Paul A.) (2010) How learning from automotive sound quality can inform urban soundscape design. Design Principles and Practices, Vol.3 (Iss.6). pp. 197-208. ISSN 1833-1874.

Cain, Rebecca, Jennings, P. A. (Paul A.), Adams, Mags, Bruce, Neil, Carlyle, Angus, Cusack, Peter, Davies, William, Hume, Ken and Plack, Christopher J. (2008) SOUND-SCAPE: A framework for characterising positive urban soundscapes. The Journal of the Acoustical Society of America, Vol.123 (Iss.5). p. 3394. doi:10.1121/1.2934071 ISSN 0001-4966.

Cain, Rebecca, Jennings, P. A. (Paul A.) and Poxon, John E. W. (2013) The development and application of the emotional dimensions of a soundscape. Applied acoustics, 74 (2). pp. 232-239. doi:10.1016/j.apacoust.2011.11.006 ISSN 0003-682X.

Campbell, Kayleen T., Craig, Duncan Q. M. and McNally, Tony (2010) Ibuprofen-loaded poly(ε-caprolactone) layered silicate nanocomposites prepared by hot melt extrusion. Journal of Materials Science : Materials in Medicine, 21 (8). pp. 2307-2316. doi:10.1007/s10856-009-3963-2 ISSN 0957-4530.

Canal, Céline M., Saleem, Aamer, Green, Roger and Hutchins, David A. (2011) Remote identification of chemicals concealed behind clothing using near infrared spectroscopy. Analytical Methods, Volume 3 (Number 1). pp. 84-91. doi:10.1039/c0ay00386g ISSN 1759-9660.

Cannizzaro, Sara, Procter, Rob, Ma, Sinong and Maple, Carsten (2020) Trust in the smart home : findings from a nationally representative survey in the UK. PLoS One, 15 (5). e0231615. doi:10.1371/journal.pone.0231615 ISSN 1932-6203.

Cao, Fang, Sun, Jiayi, Luo, Xiangyang, Qin, Chuan and Chang, Ching-Chun (2021) Privacy-preserving inpainting for outsourced image. International Journal of Distributed Sensor Networks, 17 (11). doi:10.1177/15501477211059092 ISSN 1550-1329.

Cao, Jiale, Pang, Yanwei, Han, Jungong, Gao, Bolin and Li, Xuelong (2019) Taking a look at small-scale pedestrians and occluded pedestrians. IEEE Transactions on Image Processing, 29 . pp. 3143-3152. doi:10.1109/TIP.2019.2957927 ISSN 1057-7149.

Cao, Jianyu, Feng, Wei, Chen, Yunfei, Ge, Ning and Wang, Shulan (2019) Performance analysis of a polling model with BMAP and across-queue state-dependent service discipline. IEEE Access, 7 . 127230 -127253. doi:10.1109/ACCESS.2019.2939387 ISSN 2169-3536.

Cao, Jing, Bloodworth, Alan G. and Xu, Ming (2019) An efficient 2-way shear grillage model solution for bridge RC four-pile caps under wall loading. Journal of Bridge Engineering, 24 (8). doi:10.1061/(ASCE)BE.1943-5592.0001435 ISSN 1084-0702.

Carnerup, Anna M., Ainalem, Marie-Louise, Alfredsson, Viveka and Nylander, Tommy (2009) Watching DNA condensation induced by poly(amido amine) dendrimers with time-resolved cryo-TEM. Langmuir, Vol.25 (No.21). pp. 12466-12470. doi:10.1021/la903068v ISSN 0743-7463.

Carpenter, P. W. and Thomas, P. J. (2007) Flow over compliant rotating disks. Journal of Engineering Mathematics, Vol.57 (No.3). pp. 303-315. doi:10.1007/s10665-006-9089-3 ISSN 0022-0833.

Carrera, Javier, Elena, Santiago F. and Jaramillo, Alfonso (2012) Computational design of genomic transcriptional networks with adaptation to varying environments. Proceedings of the National Academy of Sciences of the United States of America, 109 (38). pp. 15277-82. doi:10.1073/pnas.1200030109 ISSN 0027-8424.

Carta, Daniela, Knowles, Jonathan C., Guerry, Paul, Smith, Mark E. and Newport, Robert J. (2009) Sol-gel synthesis and structural characterisation of P2O5-B2O3-Na2O glasses for biomedical applications. Journal of Materials Chemistry, Vol.19 (No.1). pp. 150-158. doi:10.1039/b813288g ISSN 0959-9428.

Carta, Daniela, Knowles, Jonathan C., Smith, Mark E. and Newport, Robert J. (2007) Synthesis and structural characterization of P2O5-CaO-Na2O sol-gel materials. Journal of Non-Crystalline Solids, Vol.353 (No.11-12). pp. 1141-1149. doi:10.1016/j.jnoncrysol.2006.12.093 ISSN 0022-3093.

Carta, Daniela, Pickup, David M., Knowles, Jonathan C., Ahmed, I., Smith, Mark E. and Newport, Robert J. (2007) A structural study of sol-gel and melt-quenched phosphate-based glasses. Journal of Non-Crystalline Solids, Vol.353 (No.18-21). pp. 1759-1765. doi:10.1016/j.jnoncrysol.2007.02.008 ISSN 0022-3093.

Carta, Daniela, Qiu, D. (Dong), Guerry, Paul, Ahmed, Ifty, Abou Neel, Ensanya A., Knowles, Jonathan C., Smith, Mark E. and Newport, Robert J. (2008) The effect of composition on the structure of sodium borophosphate glasses. Journal of Non-Crystalline Solids, Vol.354 (No.31). pp. 3671-3677. doi:10.1016/j.jnoncrysol.2008.04.009 ISSN 0022-3093.

Carter, Joseph L., Kelly, Catherine A., Marshall, Jean, Hammond, Vicki, Goodship, Vannessa and Jenkins, Mike J. (2022) PEDOT : PSS conductivity enhancement through addition of the surfactant Tween 80. Polymers, 14 (23). 5072. doi:10.3390/polym14235072 ISSN 2073-4360.

Cassinath, Z., Li, Zushu, Sridhar, Seetharaman, Das, A. and Kotadia, Hiren (2019) Microstructural modification of Sn–Bi and Sn–Bi–Al immiscible alloys by shearing. Materials Science and Technology, 35 (18). pp. 2157-2164. doi:10.1080/02670836.2019.1661659 ISSN 0267-0836.

Castaldo, Rossana, Chappell, M. J., Byrne, H., Innominato, Pasquale F., Hughes, S., Pescapè, A. and Pecchia, Leandro (2021) Detection of melatonin-onset in real settings via wearable sensors and artificial intelligence : a pilot study. Biomedical Signal Processing and Control, 65 . 102386. doi:10.1016/j.bspc.2020.102386 ISSN 1746-8094.

Castles, Flynn, Fells, Julian, Isakov, Dmitry, Morris, Stephen, Watt, Andrew and Grant, Patrick S. (2020) Active metamaterials with negative static electric susceptibility. Advanced Materials, 32 (9). 1904863. doi:10.1002/adma.201904863 ISSN 0935-9648.

Catozzi, Simona, Hill, Roger, Li, Xiao‐Mei, Dulong, Sandrine, Collard, Elodie and Ballesta, Annabelle (2023) Interspecies and in vitro‐in vivo scaling for quantitative modeling of whole‐body drug pharmacokinetics in patients : application to the anticancer drug oxaliplatin. CPT: pharmacometrics & systems pharmacology, 12 (2). pp. 221-235. doi:10.1002/psp4.12895 ISSN 2163-8306.

Cave, Martin (2006) Encouraging infrastructure competition via the ladder of investment. Telecommunications Policy, Volume 30 (Number 3-4). pp. 223-237. doi:10.1016/j.telpol.2005.09.001 ISSN 0308-5961.

Cawthorn, C. J., Minton, J. J. and Brambley, Edward J. (2016) Asymptotic analysis of cold sandwich rolling. International Journal of Mechanical Sciences, 106 . pp. 184-193. doi:10.1016/j.ijmecsci.2015.12.012 ISSN 0020-7403.

Caño, Pablo, Hinojosa, Manuel, García, Iván, Beanland, Richard, Fuertes Marrón, David, Ruiz, Carmen M., Johnson, Andrew and Rey-Stolle, Ignacio (2021) GaAsP/SiGe tandem solar cells on porous Si substrates. Solar Energy, 230 . pp. 925-934. doi:10.1016/j.solener.2021.10.075 ISSN 0038-092X.

Cebula, Filip, Wojtaszek, Konrad, Shabbir, Hasan, Kula, Anna, Pędzich, Zbigniew, Kornaus, Kamil, Małecki, Stanisław, Kołczyk-Siedlecka, Karolina, Socha, Robert P., Escribà-Gelonch, Marc, Rogóż, Katarzyna, Goodsite, Michael, Hessel, Volker and Wojnicki, Marek (2022) Circular solid state reduction process of fine copper powder synthesis with life cycle assessment for photovoltaics application. Sustainable Materials and Technologies, 33 . e00486. doi:10.1016/j.susmat.2022.e00486 ISSN 22149937.

Chacko, Salvio, Chung, Yongmann M., Choi, S. K., Nam, H. Y. and Jeong, H. Y. (2011) Large-eddy simulation of thermal striping in unsteady non-isothermal triple jet. International Journal of Heat and Mass Transfer, Vol.54 (No.19-20). pp. 4400-4409. doi:10.1016/j.ijheatmasstransfer.2011.05.002 ISSN 00179310.

Chai, Jin-Chun, Shen, Shui-long and Geng, Xueyu (2019) Effect of initial water content and pore water chemistry on intrinsic compression behavior. Marine Georesources & Geotechnology, 37 (4). pp. 417-423. doi:10.1080/1064119X.2018.1445146 ISSN 1521-0618.

Chakrabarti, M. H., Low, John C. T., Brandon, M. P. , Yufit, V. , Hashim, M. A. , Irfan, M. F. , Akhtar, J., Ruiz-Trejo, E. and Hussain, M. A. (2013) Progress in the electrochemical modification of graphene-based materials and their applications. Electrochimica Acta, Volume 107 . pp. 425-440. doi:10.1016/j.electacta.2013.06.030 ISSN 0013-4686.

Chakraborty, Dhritiman, Brooke, Joshua, Hulse, Nicholas C. S. and Neophytou, Neophytos (2019) Thermal rectification optimization in nanoporous Si using Monte Carlo simulations. Journal of Applied Physics, 126 (18). 184303. doi:10.1063/1.5119806 ISSN 0021-8979.

Chakraborty, Dhritiman, Karamitaheri, Hossein, de Sousa Oliveira, Laura and Neophytou, Neophytos (2020) Effect of wave versus particle phonon nature in thermal transport through nanostructures. Computational Materials Science, 180 . 109712. doi:10.1016/j.commatsci.2020.109712 ISSN 0927-0256.

Chalmers, Alan, Debattista, Kurt and Ramic-Brkic, Belma (2009) Towards high-fidelity multi-sensory virtual environments. Visual Computer, Vol.25 (No.12). pp. 1101-1108. doi:10.1007/s00371-009-0389-2 ISSN 0178-2789.

Chan, Chun Wa, Gammon, P. M., Shah, V. A., Chen, Han, Jennings, M. R., Fisher, Craig A., Pérez-Tomás, Amador, Myronov, Maksym and Mawby, P. A. (Philip A.) (2015) Simulations of a lateral PiN diode on SiSiC substrate for high temperature applications. Materials Research Forum, 821 (7). pp. 624-627. doi:10.4028/www.scientific.net/MSF.821-823.624

Chan, Tak-Ming and Gardner, L. (Leroy) (2008) Bending strength of hot-rolled elliptical hollow sections. Journal of Constructional Steel Research, Vol.64 (No.9). pp. 971-986. doi:10.1016/j.jcsr.2007.11.001 ISSN 0143-974X.

Chan, Tak-Ming and Gardner, L. (Leroy) (2008) Compressive resistance of hot-rolled elliptical hollow sections. Engineering Structures, Vol.30 (No.2). pp. 522-532. doi:10.1016/j.engstruct.2007.04.019 ISSN 0141-0296.

Chan, Tak-Ming and Gardner, L. (Leroy) (2009) Development of design rules for elliptical hollow sections. Structural Engineer, Vol.87 (No.13). pp. 30-33. ISSN 1466-5123.

Chan, Tak-Ming and Gardner, L. (Leroy) (2009) Flexural buckling of elliptical hollow section columns. Journal of Structural Engineering, Vol.135 (No.5). pp. 546-557. doi:10.1061/(ASCE)ST.1943-541X.0000005 ISSN 0733-9445.

Chan, Tak-Ming, Gardner, L. (Leroy) and Law, K. H. (2010) Structural design of elliptical hollow sections : a review. Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol.163 (No.6). pp. 391-402. doi:10.1680/stbu.2010.163.6.391 ISSN 0965-0911.

Chandra, Yatish, Mukhopadhyay, Tanmoy, Adhikari, Sondipon and Figiel, Lukasz (2020) Size-dependent dynamic characteristics of graphene based multi-layer nano hetero-structures. Nanotechnology, 31 (14). 145705. doi:10.1088/1361-6528/ab6231 ISSN 0957-4484.

Chao, Jiaqi, Chen, Faze, Xia, Lei, Cai, Zexin, Wang, Fujun, Tian, Yanling and Zhang, Dawei (2023) Laser ablation and chemical oxidation synergistically induced micro/nano re-entrant structures for super-oleophobic surface with Cassie state. Nanomanufacturing and Metrology, 6 (1). 18. doi:10.1007/s41871-023-00190-w ISSN 2520-8128.

Chao, Z., Shi, D. and Fowmes, G. J. (2023) Mechanical behaviour of soil under drying-wetting cycles and vertical confining pressure. Environmental Geotechnics . doi:10.1680/jenge.22.00048 ISSN 2051-803X. (In Press)

Chao, Zhiming and Fowmes, G. J. (2021) Modified stress and temperature-controlled direct shear apparatus on soil-geosynthetics interfaces. Geotextiles and Geomembranes, 49 (3). pp. 825-841. doi:10.1016/j.geotexmem.2020.12.011 ISSN 0266-1144.

Chao, Zhiming and Fowmes, Gary J. (2022) The short-term and creep mechanical behaviour of clayey soil-deocomposite drainage layer interfaces subjected to environmental loadings. Geotextiles and Geomembranes, 50 (2). pp. 238-248. doi:10.1016/j.geotexmem.2021.10.004 ISSN 0266-1144.

Chao, Zhiming, Fowmes, Gary J. and Dassanayake, S. M. (2021) Comparative study of hybrid artificial intelligence approaches for predicting peak shear strength along soil-Geocomposite drainage layer interfaces. International Journal of Geosynthetics and Ground Engineering, 7 . 60. doi:10.1007/s40891-021-00299-2 ISSN 2199-9260.

Chao, Zhiming, Shi, Danda, Fowmes, Gary J., Xu, Xu, Yu, Wenhan, Cui, Peng, Hu, Tianxiang and Yang, Chuanxin (2023) Artificial intelligence algorithms for predicting peak shear strength of clayey soil-geomembrane interfaces and experimental validation. Geotextiles and Geomembranes, 51 (1). pp. 179-198. doi:10.1016/j.geotexmem.2022.10.007 ISSN 0266-1144.

Chapman, James D., Chappell, M. J. (Michael J.) and Evans, Neil D. (2011) The use of a formal sensitivity analysis on epidemic models with immune protection from maternally acquired antibodies. Computer Methods and Programs in Biomedicine, Vol.104 (No.2). pp. 37-49. doi:10.1016/j.cmpb.2010.08.019 ISSN 01692607.

Chapman, James D. and Evans, Neil D. (2009) The structural identifiability of susceptible–infective–recovered type epidemic models with incomplete immunity and birth targeted vaccination. Biomedical Signal Processing and Control, Vol.4 (No.4). pp. 278-284. doi:10.1016/j.bspc.2009.02.003 ISSN 17468094.

Chappell, M. J. (Michael J.), Evans, Neil D., Errington, Rachel J., Khan, I. A., Campbell, L., Ali, Reza, Godfrey, Keith and Smith, Paul J. (2008) A coupled drug kinetics-cell cycle model to analyse the response of human cells to intervention by topotecan. Computer Methods and Programs in Biomedicine, Vol.89 (No.2). pp. 169-178. doi:10.1016/j.cmpb.2007.11.002 ISSN 0169-2607.

Chater, Nick (2023) How could we make a social robot? A virtual bargaining approach. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences . ISSN 1364-503X. (In Press)

Chater, Nick (2023) How could we make a social robot? A virtual bargaining approach. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences . ISSN 1364-503X. (In Press)

Chaudhari, Tushar, MacRae, Gregory, Bull, Des, Clifton, G. Charles and Hicks, Stephen J. (2022) A simple mechanical model for steel beam – column slab subassembly nonlinear cyclic behaviour. Journal of Earthquake Engineering, 27 (12). pp. 3518-3535. doi:10.1080/13632469.2022.2139308 ISSN 1363-2469.

Chauhan, K. V., Sullivan, Paul J., Yang, J. L. and Jones, T. S. (Tim S.) (2010) Efficient organic photovoltaic cells through structural modification of chloroaluminum phthalocyanine/fullerene heterojunctions. Journal of Physical Chemistry C, Vol.114 (No.7). pp. 3304-3308. doi:10.1021/jp910601k ISSN 1932-7447.

Chauhan, Virendra, Hatton, Ross A., Sullivan, Paul J., Jones, T. S. (Tim S.), Cho, Sang Wan, Piper, Louis, deMasi, Alex and Smith, Kevin (2010) Elucidating the factors that determine the open circuit voltage in discrete heterojunction organic photovoltaic cells. Journal of Materials Chemistry, Vol.20 (No.6). pp. 1173-1178. doi:10.1039/b919723k ISSN 0959-9428.

Chechik, Lova, Christofidou, Katerina A., Markanday, Jonathon F.S., Goodall, Alexander D., Miller, James R., West, Geoffrey D., Stone, Howard and Todd, Iain (2022) Hardness variation in inconel 718 produced by laser directed energy deposition. Materialia, 26 . 101643. doi:10.1016/j.mtla.2022.101643 ISSN 2589-1529.

Chelminiak, P., Dixon, J. M. and Tuszynski, J. A. (2010) Torsional elastic deformations of microtubules within continuous sheet model. European Physical Journal E. Soft Matter, Vol.31 (No.2). pp. 215-227. doi:10.1140/epje/i2010-10562-x ISSN 1292-8941.

Chen, Beiqi, Wang, Liangjing, Fan, Xijian, Bo, Weihao, Yang, Xubing and Tjahjadi, Tardi (2023) Semi-FCMNet : semi-supervised learning for forest cover mapping from satellite imagery via ensemble self-training and perturbation. Remote Sensing, 15 (16). 4012. doi:10.3390/rs15164012 ISSN 2072-4292. (In Press)

Chen, Chaoyi, Eissa, Ahmed M., Schiller, Tara L. and Cameron, Neil R. (2017) Emulsion-templated porous polymers prepared by thiol-ene and thiol-yne photopolymerisation using multifunctional acrylate and non-acrylate monomers. Polymer, 126 . pp. 395-401. doi:10.1016/j.polymer.2017.04.021 ISSN 0032-3861.

Chen, Chen, Xia, Yuanyou, Lin, Manqing and Ni, Qing (2022) Structural parameter variation working on the performance of anti-uplift multibell underreamed anchors. Scientific Reports, 12 (1). 15015. doi:10.1038/s41598-022-19353-8 ISSN 2045-2322.

Chen, Cheng, Ricles, James M., Karavasilis, Theodore L., Chae, Yunbyeong and Sause, Richard (2012) Evaluation of a real-time hybrid simulation system for performance evaluation of structures with rate dependent devices subjected to seismic loading. Engineering Structures, Vol. 35 . pp. 71-82. doi:10.1016/j.engstruct.2011.10.006 ISSN 01410296.

Chen, Gaojian, Tao, Lei, Mantovani, Giuseppe, Ladmiral, Vincent, Burt, David P., Macpherson, Julie V. and Haddleton, David M. (2007) Synthesis of azide/alkyne-terminal polymers and application for surface functionalisation through a [2+3] Huisgen cycloaddition process, "click chemistry''. Soft Matter, Volume 3 (Number 6). pp. 732-739. doi:10.1039/b618325e ISSN 1744-683X.

Chen, Haisheng, Ding, Yulong, Lapkin, Alexei and Fan, Xiaolei (2009) Rheological behaviour of ethylene glycol-titanate nanotube nanofluids. Journal of Nanoparticle Research, Vol.11 (No.6). pp. 1513-1520. doi:10.1007/s11051-009-9599-9 ISSN 1388-0764.

Chen, Hui, Li, Shengcai, Zuo, Zhi-gang and Li, Shuai (2008) Direct numerical simulation of bubble-cluster's dynamic characteristics. Journal of Hydrodynamics, Vol.20 (No.6). pp. 689-695. doi:10.1016/S1001-6058(09)60003-2 ISSN 1001-6058.

Chen, Jingkun, Zhang, Jianguo, Debattista, Kurt and Han, Jungong (2023) Semi-supervised unpaired medical image segmentation through task-affinity consistency. IEEE Transactions on Medical Imaging, 42 (3). pp. 594-605. doi:10.1109/TMI.2022.3213372 ISSN 0278-0062.

Chen, K., Huang, X., Wan, Chaoying and Liu, H. (2015) Efficient oxygen reduction catalysts formed of cobalt phosphide nanoparticles decorated heteroatoms-doped mesoporous carbon nanotubes. Chemical Communications, Volume 51 (Number 37). pp. 7891-7894. doi:10.1039/c5cc02028j ISSN 1359-7345.

Chen, Kuiyong, Huang, Xiaobin, Wan, Chaoying and Liu, Hong (2016) Heteroatom–doped hollow carbon microspheres based on amphiphilic supramolecular vesicles and highly crosslinked polyphosphazene for high performance supercapacitor electrode materials. Electrochimica Acta, 222 . pp. 543-550. doi:10.1016/j.electacta.2016.11.007 ISSN 0013-4686.

Chen, L. (Lin), Morris, Kyle, Laybourn, Andrea, Elias, D. (David), Hicks, Matthew R., Rodger, Alison, Serpell, Louise C. and Adams, Dave J. (2010) Self-assembly mechanism for a naphthalene-dipeptide leading to hydrogelation. Langmuir, Vol.26 (No.7). pp. 5232-5242. doi:10.1021/la903694a ISSN 0743-7463.

Chen, Pei, Xie, Fengwei and McNally, Tony (2021) Understanding the effects of montmorillonite and sepiolite on the properties of solution‐cast chitosan and chitosan/silk peptide composite films. Polymer International, 70 (5). pp. 527-535. doi:10.1002/pi.6103 ISSN 0959-8103.

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2021) Cooperative effects of cellulose nanocrystals and sepiolite when combined on ionic liquid plasticised chitosan materials. Polymers, 13 (4). 571. doi:10.3390/polym13040571 ISSN 2073-4360.

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2021) Graphene oxide enhanced ionic liquid plasticisation of chitosan/alginate bionanocomposites. Carbohydrate Polymers, 253 . 117231. doi:10.1016/j.carbpol.2020.117231 ISSN 0144-8617.

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2021) Ionic liquid-plasticised composites of chitosan and hybrid 1D and 2D nanofillers. Functional Composite Materials, 2 . 14. doi:10.1186/s42252-021-00026-0 ISSN 2522-5774.

Chen, Pei, Xie, Fengwei, Tang, Fengzai and McNally, Tony (2020) Structure and properties of thermomechanically processed chitosan/carboxymethyl cellulose/graphene oxide polyelectrolyte complexed bionanocomposites. International Journal of Biological Macromolecules, 158 . pp. 420-429. doi:10.1016/j.ijbiomac.2020.04.259 ISSN 0141-8130.

Chen, Rong, Pearce, Daniel J. G., Fortuna, S. (Sara), Cheung, David L. and Bon, Stefan Antonius Franciscus (2011) Polymer vesicles with a colloidal armor of nanoparticles. Journal of the American Chemical Society, Vol.133 (No.7). pp. 2151-2153. doi:10.1021/ja110359f ISSN 0002-7863.

Chen, Tao, Colver, Patrick J. and Bon, Stefan Antonius Franciscus (2007) Organic-inorganic hybrid hollow spberes prepared from TiO2-stabilized pickering emulsion polymerization. Advanced Materials, Vol.19 (No.17). pp. 2286-2289. doi:10.1002/adma.200602447 ISSN 0935-9648.

Chen, Y. C., Salter, P. S., Knauer, S., Weng, L., Frangeskou, Angelo, Stephen, Colin J., Ishmael, Shazeaa N. , Dolan, P. R., Johnson, S., Green, Ben, Morley, Gavin, Newton, Mark E., Rarity, J. G., Booth, M. J. and Smith, J. M. (2017) Laser writing of coherent colour centres in diamond. Nature Photonics, 11 . pp. 77-80. doi:10.1038/nphoton.2016.234 ISSN 1749-4885.

Chen, Yangzhi, Liu, X., Chetwynd, D. G. and Huang, P. (2008) Investigation of a novel elastic-mechanical wheel transmission under light duty conditions. Mechanism and Machine Theory, Vol.43 (No.11). pp. 1462-1477. doi:10.1016/j.mechmachtheory.2007.11.005 ISSN 0094-114X.

Chen, Yi-Chieh, Young, Robert J. (Robert Joseph), Macpherson, Julie V. and Wilson, Neil R. (2011) Silver-decorated carbon nanotube networks as SERS substrates. Journal of Raman Spectroscopy, Vol.42 (No.6). pp. 1255-1262. doi:10.1002/jrs.2862 ISSN 03770486.

Chen, Yi-Chieh, Young, Robert J. (Robert Joseph), Macpherson, Julie V. and Wilson, Neil R. (2007) Single-walled carbon nanotube networks decorated with silver nanoparticles : a novel graded SERS substrate. Journal of Physical Chemistry C, Vol.111 (No.44). pp. 16167-16173. doi:10.1021/jp073771z ISSN 1932-7447.

Chen, Yunfei, Wang, Cong and Zhao, Bo (2011) Performance comparison of feature-based detectors for spectrum sensing in the presence of primary user traffic. IEEE Signal Processing Letters, Vol.18 (No.5). pp. 291-294. doi:10.1109/LSP.2011.2123091 ISSN 1070-9908.

(2018) Ultrafast self-induced X-ray transparency and loss of magnetic diffraction. Physical Review Letters, 121 . 137403. doi:10.1103/PhysRevLett.121.137403 ISSN 0031-9007.

Chen, Zefeng, Chen, Xuequan, Tao, Li, Chen, Kun, Zhang, Rui, Long, Mingzhu, Pickwell-MacPherson, Emma and Xu, Jianbin (2022) Broadband graphene-based electro-optic chiral polarization conversion for terahertz pulse shaping. ACS Photonics, 9 (11). pp. 3633-3641. doi:10.1021/acsphotonics.2c01128 ISSN 2330-4022.

Chen, Zhao, Xiu, Yahui, Zheng, Yuxin, Wang, Xinxin, Wang, Qian, Guo, Danqi and Wan, Yan (2023) A weakly supervised learning pipeline for profiled fibre inspection. IET Image Processing . doi:10.1049/ipr2.12984 ISSN 1751-9659. (In Press)

Cheneler, D., Bowen, J., Leigh, Simon J., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Ward, M. C. L. (2011) Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, Vol.111 (No.8). pp. 1214-1223. doi:10.1016/j.ultramic.2011.03.009 ISSN 0304-3991.

Cheng, Chuan, Drummond, Ross, Duncan, Stephen R. and Grant, Patrick S. (2020) Combining composition graded positive and negative electrodes for higher performance Li-ion batteries. Journal of Power Sources, 448 . 227376. doi:10.1016/j.jpowsour.2019.227376 ISSN 0378-7753.

Cheng, Chuan, Drummond, Ross, Duncan, Stephen R. and Grant, Patrick S. (2022) Extending the energy-power balance of Li-ion batteries using graded electrodes with precise spatial control of local composition. Journal of Power Sources, 542 . 231758. doi:10.1016/j.jpowsour.2022.231758 ISSN 0378-7753.

Cheng, Chuan, Grant, Patrick S. and Lührs, Lukas (2020) Electrochemical mechanics of metal thin films : charge‐induced reversible surface stress for actuation. Advanced Electronic Materials , 6 . 1900364. doi:10.1002/aelm.201900364 ISSN 2199-160X.

Cheng, Chuan and Lührs, Lukas (2021) Robust metallic actuators based on nanoporous gold rapidly dealloyed from gold–nickel precursors. Advanced Functional Materials, 31 (48). 2107241. doi:10.1002/adfm.202107241 ISSN 1616-3028.

Cheng, Chuan, Lührs, Lukas and Krekeler, Tobias (2021) Simultaneous enhancement of actuation strain and mechanical strength of nanoporous Ni–Mn actuators. Advanced Electronic Materials , 7 (7). 2100381. doi:10.1002/aelm.202100381 ISSN 2199-160X.

Cheng, Zhanbo and Geng, Xueyu (2023) Investigation of unconfined compressive strength for biopolymer treated clay. Construction and Building Materials, 385 . 131458. doi:10.1016/j.conbuildmat.2023.131458 ISSN 0950-0618.

Cherkasov, Nikolay, Baldwin, Samuel, Gibbons, Gregory John and Isakov, Dmitry (2020) Monitoring chemistry in situ with the Smart Stirrer a magnetic stirrer bar with an integrated process monitoring system. ACS Sensors, 5 (8). pp. 2497-2502. doi:10.1021/acssensors.0c00720 ISSN 2379-3694.

Cherrington, Ruth, Goodship, Vannessa, Meredith, James O., Wood, Benjamin M., Coles, Stuart R., Vuillaume, A., Feito-Boirac, A., Spee, F. and Kirwan, Kerry (2012) Producer responsibility : defining the incentive for recycling composite wind turbine blades in Europe. Energy Policy, Vol.47 . pp. 13-21. doi:10.1016/j.enpol.2012.03.076 ISSN 0301-4215.

Cherrington, Ruth, Marshall, Jean, Alexander, Allen T. and Goodship, Vannessa (2022) Exploring the circular economy through coatings in transport. Sustainable Production and Consumption, 32 . pp. 136-146. doi:10.1016/j.spc.2022.04.016 ISSN 2352-5509.

Cheung, David L. and Bon, Stefan Antonius Franciscus (2009) Stability of Janus nanoparticles at fluid interfaces. Soft Matter, Vol.5 (No.20). pp. 3969-3976. doi:10.1039/b908462b ISSN 1744-683X.

Chianese, Giovanni, Franciosa, Pasquale, Sun, Tianzhu, Ceglarek, Dariusz and Patalano, Stanislao (2022) Using photodiodes and supervised machine learning for automatic classification of weld defects in laser welding of thin foils copper-to-steel battery tabs. Journal of Laser Applications, 34 (4). 042040. doi:10.2351/7.0000800 ISSN 1042-346X.

Chin, Seow J., Doherty, Matthew, Vempati, Sesha, Dawson, Paul, Byrne, Cormac, Meenan, Brian J., Guerra, Valentina and McNally, Tony (2019) Solvothermal synthesis of graphene oxide and its composites with poly(ε-caprolactone). Nanoscale, 11 (40). pp. 18672-18682. doi:10.1039/C9NR04202D ISSN 2040-3364.

Cho, S. W., Piper, L. F. J., DeMasi, A., Preston, A. R. H., Smith, K. E., Chauhan, K. V., Hatton, Ross A. and Jones, T. S. (Tim S.) (2010) Soft X-ray spectroscopy of C-60/copper phthalocyanine/MoO3 interfaces: role of reduced MoO3 on energetic band alignment and improved performance. Journal of Physical Chemistry C, Vol.114 (No.42). pp. 18252-18257. doi:10.1021/jp1071428 ISSN 1932-7447.

Cho, S. W., Piper, L. F. J., DeMasi, A., Preston, A. R. H., Smith, K. E., Chauhan, K. V., Sullivan, Paul J., Hatton, Ross A. and Jones, T. S. (Tim S.) (2010) Electronic structure of C-60/phthalocyanine/ITO interfaces studied using soft x-ray spectroscopies. Journal of Physical Chemistry C, Vol.114 (No.4). pp. 1928-1933. doi:10.1021/jp910504a ISSN 1932-7447.

Chu, T. W. and Jones, P. (Peter), Dr. (2008) Analysis and simulation of nonlinear handling characteristics of automotive vehicles with focus on lateral load transfer. Vehicle System Dynamics, Vol.46 (Suppl.S1). pp. 17-31. doi:10.1080/00423110701882272 ISSN 0042-3114.

Ciamarra, M. Pica, Coniglio, A., de Martino, D. and Nicodemi, Mario (2007) Shear- and vibration-induced order-disorder transitions in granular media. European Physical Journal E. Soft Matter, Vol.24 (No.4). pp. 411-415. doi:10.1140/epje/i2007-10256-6 ISSN 1292-8941.

Ciamarra, Massimo Pica, Nicodemi, Mario and Coniglio, Antonio (2010) Recent results on the jamming phase diagram. Soft Matter, Vol.6 (No.13). pp. 2871-2874. doi:10.1039/b926810c ISSN 1744-683X.

Cimpeanu, Radu, Devine, Mel T., Tocher, David and Clune, Louise (2015) Development and analysis of a port terminal loader model at RUSAL Aughinish. Simulation Modelling Practice and Theory, 51 . pp. 14-30. doi:10.1016/j.simpat.2014.11.001 ISSN 1569-190X.

Cinelli, Marco, Coles, Stuart R., Sadik, Omowunmi, Karn, Barbara and Kirwan, Kerry (2016) A framework of criteria for the sustainability assessment of nanoproducts. Journal of Cleaner Production, 126 . pp. 277-287. doi:10.1016/j.jclepro.2016.02.118 ISSN 0959-6526.

Ciocci, Paolo, Valavanis, Dimitrios, Meloni, Gabriel N., Lemineur, Jean‐François, Unwin, Patrick R. and Kanoufi, Frédéric (2023) Optical super‐localisation of single nanoparticle nucleation and growth in nanodroplets. ChemElectroChem . e202201162. doi:10.1002/celc.202201162 ISSN 2196-0216. (In Press)

Clark, Leon, Shirinzadeh, Bijan, Tian, Yanling and Yao, Bin (2016) Development of a passive compliant mechanism for measurement of micro/nano-scale planar three DOF motions. IEEE/ASME Transactions on Mechatronics, 21 (3). 1222 -1232. doi:10.1109/TMECH.2015.2503728 ISSN 1083-4435.

Clark, Samuel, Janik, Vit, Lan, Yongjun and Sridhar, Seetharaman (2017) Interphase precipitation – an interfacial segregation model. ISIJ International, 57 (3). pp. 524-532. doi:10.2355/isijinternational.ISIJINT-2016-544 ISSN 0915-1559.

Cockayne, J., Graham, M. M., Oates, C. J., Sullivan, Tim J. and Teymur, O. (2022) Testing whether a learning procedure is calibrated. Journal of Machine Learning Research, 23 (203). pp. 1-36. ISSN 1532-4435.

Cockayne, Jon, Oates, Chris J., Sullivan, T. J. and Girolami, Mark (2019) Bayesian probabilistic numerical methods. SIAM Review, 61 (4). pp. 756-789. doi:10.1137/17M1139357 ISSN 0036-1445.

Codeglia, Daniela, Dixon, Neil, Fowmes, Gary J. and Marcato, Gianluca (2017) Analysis of acoustic emission patterns for monitoring of rock slope deformation mechanisms. Engineering Geology, 219 . pp. 21-31. doi:10.1016/j.enggeo.2016.11.021 ISSN 0013-7952.

Coelho, Ana M. Girão and Mottram, J. Toby (2015) A review of the behaviour and analysis of bolted connections and joints in pultruded fibre reinforced polymers. Materials & Design, 74 . pp. 86-107. doi:10.1016/j.matdes.2015.02.011 ISSN 0264-1275.

Coelho, Ana M. Girão, Mottram, J. Toby and Harries, Kent A. (2015) Bolted connections of pultruded GFRP : implications of geometric characteristics on net section failure. Composite Structures, 131 . pp. 878-884. doi:10.1016/j.compstruct.2015.06.048 ISSN 0263-8223.

Coelho, Ana M. Girão, Mottram, J. Toby and Harries, Kent A. (2015) Finite element guidelines for simulation of fibre-tension dominated failures in composite materials validated by case studies. Composite Structures, 126 . pp. 299-313. doi:10.1016/j.compstruct.2015.02.071 ISSN 0263-8223.

Colard, Catheline A. L., Cave, Richard A., Grossiord, Nadia, Covington, James A. and Bon, Stefan Antonius Franciscus (2009) Conducting nanocomposite polymer foams from ice-crystal-templated Assembly of mixtures of colloids. Advanced Materials, Volume 21 (Number 28). pp. 2894-2898. doi:10.1002/adma.200803007 ISSN 0935-9648.

Colard, Catheline A. L., Cave, Richard A., Grossiord, Nadia, Covington, James A. and Bon, Stefan Antonius Franciscus (2009) Conducting nanocomposite polymer foams from ice-crystal-templated assembly of mixtures of colloids. Advanced Materials, Vol.21 (No.28). pp. 2894-2898. doi:10.1002/adma.200803007 ISSN 0935-9648.

Colard, Catheline A. L., Teixeira, Roberto F. A. and Bon, Stefan Antonius Franciscus (2010) Unraveling mechanistic events in solids-stabilized emulsion polymerization by monitoring the concentration of nanoparticles in the water phase. Langmuir, Vol.26 (No.11). pp. 7915-7921. doi:10.1021/la904817f ISSN 0743-7463.

Collier, Guilhem J., Kim, Minsuok, Chung, Yongmann M. and Wild, Jim M. (2018) 3D phase contrast MRI in models of human airways : validation of computational fluid dynamics simulations of steady inspiratory flow. Journal of Magnetic Resonance Imaging, 48 (5). pp. 1400-1409. doi:10.1002/jmri.26039 ISSN 1053-1807.

Collingwood, Joanna F., Chandra, Saurav, Davidson, Mark R., Mikhaylova, Albina, Eskin, Thomas, Dobson, Jon, Forder, John R. and Batich, Christopher (2008) P2-001: High-resolution magnetic resonance imaging to quantify relaxation parameters in Alzheimer's brain tissue. Alzheimer's and Dementia, Vol.4 (No.4, Suppl.). T365-T366. doi:10.1016/j.jalz.2008.05.1081 ISSN 1552-5260.

Collingwood, Joanna F., Palmer, Stuart B., Lees, Martin R., Edwards, C., Santos, J. A. (Jorge A.), Sousa, J. B. and Jiles, David. (2009) Ferro I phase and gadolinium. Physical Review B, Vol.79 (No.10). pp. 104401-1. doi:10.1103/PhysRevB.79.104401 ISSN 1098-0121.

Colver, Patrick J. and Bon, Stefan Antonius Franciscus (2007) Cellular polymer monoliths made via pickering high internal phase emulsions. Chemistry of Materials, Vol.19 (No.7). pp. 1537-1539. doi:10.1021/cm0628810 ISSN 0897-4756.

Constantinides, Panos and Fitzmaurice, David A. (2018) Artificial intelligence in cardiology : applications, benefits and challenges. British Journal of Cardiology, 25 (3). pp. 86-87. doi:10.5837/bjc.2018.024 ISSN 0969-6113.

Cook, Sarah, Chan, Hui-Ling, Abolfathi, Soroush, Bending, G. D., Schäfer, Hendrik and Pearson, Jonathan M. (2020) Longitudinal dispersion of microplastics in aquatic flows using fluorometric techniques. Water Research, 170 . 115337. doi:10.1016/j.watres.2019.115337 ISSN 0043-1354.

Cook, Sarah, Price, Oliver, King, Andrew, Finnegan, Chris, van Egmond, Roger, Schäfer, Hendrik, Pearson, Jonathan M., Abolfathi, Soroush and Bending, G. D. (2020) Bedform characteristics and biofilm community development interact to modify hyporheic exchange. Science of The Total Environment, 749 . 141397. doi:10.1016/j.scitotenv.2020.141397 ISSN 0048-9697.

Cooper, A. J. (2005) Effect of mean entropy on unsteady disturbance propagation in a slowly varying duct with mean swirling flow. Journal of Sound and Vibration, Vol.291 (No.3-5). pp. 779-801. doi:10.1016/j.jsv.2005.06.041 ISSN 0022-460X.

Cooper, A. J. and Peake, N. (2006) Transient growth and rotor-stator interaction noise in mean swirling duct flow. JOURNAL OF SOUND AND VIBRATION, 295 (3-5). pp. 553-570. doi:10.1016/j.jsv.2006.01.051 ISSN 0022-460X.

Cooper, Laura J. and Sprittles, James E. (2020) A computational study of fluctuating viscoelastic forces on trapped interfaces in porous media. European Journal of Mechanics - B Fluids, 84 . pp. 496-506. doi:10.1016/j.euromechflu.2020.07.010 ISSN 0997-7546.

Corlett, Emily K., Blade, Helen, Hughes, Leslie P., Sidebottom, Philip J., Walker, David, Walton, Richard I. and Brown, Steven P. (2020) 5-amino-2-methylpyridinium hydrogen fumarate : an XRD and NMR crystallography analysis. Magnetic Resonance in Chemistry, 58 (11). pp. 1026-1035. doi:10.1002/mrc.5021 ISSN 0749-1581.

Corsini, Niccolo R. C., Hine, Nicholas, Haynes, Peter D. and Molteni, Carla (2017) Unravelling the roles of size, ligands and pressure in the piezochromic properties of CdS nanocrystals. Nano Letters, 17 (2). pp. 1042-1048. doi:10.1021/acs.nanolett.6b04461 ISSN 1530-6984.

Coverdale, James P. C., Barnett, James P., Dr., Adamu, Adamu H., Griffiths, Ellie, Stewart, Alan J. S. and Blindauer, Claudia A. (2019) A metalloproteomic analysis of interactions between plasma proteins and zinc : elevated fatty acid levels affect zinc distribution. Metallomics, 11 (11). pp. 1805-1819. doi:10.1039/c9mt00177h ISSN 1756-5901.

Cowden, Adam M., Whittock, Abigail L., Holt, Emily L., Stavros, Vasilios G. and Wills, Martin (2023) Synthesis and characterisation of novel composite sunscreens containing both avobenzone and octocrylene motifs †. RSC Advances , 13 (25). pp. 17017-17027. doi:10.1039/d3ra02252h ISSN 2046-2069.

Cresswell, Rosalie, Dupree, Ray, Brown, Steven P., Pereira, Caroline S., Skaf, Munir S., Sorieul, Mathias, Dupree, Paul and Hill, Stefan (2021) Importance of water in maintaining softwood secondary cell wall nanostructure. Biomacromolecules, 22 (11). pp. 4669-4680. doi:10.1021/acs.biomac.1c00937 ISSN 1525-7797.

Crevillén-García, D. and Power, H. (2017) Multilevel and quasi-Monte Carlo methods for uncertainty quantification in particle travel times through random heterogeneous porous media. Royal Society Open Science , 4 (8). 170203. doi:10.1098/rsos.170203 ISSN 2054-5703.

Cruickshank, Amy C., Tay, Stephen E. R., Illy, Benoit N., Da Campo, Raffaello, Schumann, Stefan, Jones, T. S. (Tim S.), Heutz, Sandrine, McLachlan, Martyn A., McComb, D. W., Riley, D. Jason and Ryan, M. P. (2011) Electrodeposition of ZnO nanostructures on molecular thin films. Chemistry of Materials, Vol.23 (No.17). pp. 3863-3870. doi:10.1021/cm200764h ISSN 0897-4756.

Cubitt, Sean, Lury, Celia, McQuire, Scott, Papastergiadis, Nikos, Palmer, Daniel, Pfefferkorn, Jasmin and Sunde, Emilie K. (2021) Ambient images. The Nordic Journal of Aesthetics, 30 (61-62). pp. 68-77. doi:10.7146/nja.v30i61-62.127861 ISSN 2000-1452.

Cui, Liangyu, Gerhardy, Christof, Schomburg, Werner K., Tian, Yanling and Zhang, Dawei (2015) Fabrication of polymer electronic boards by ultrasonic embossing and welding. Microsystem Technologies, 21 (2). pp. 365-369. doi:10.1007/s00542-013-2018-2 ISSN 0946-7076.

Cuomo, Giovanni, Allsop, William, Bruce, Tom and Pearson, Jonathan M. (2010) Breaking wave loads at vertical seawalls and breakwaters. Coastal Engineering, Vol.57 (No.4). pp. 424-439. doi:10.1016/j.coastaleng.2009.11.005 ISSN 0378-3839.

D'Souza, Neil, Roebuck, Bryan, Collins, David M., West, Geoffrey D. and Panwisawas, Chinnapat (2020) Relating micro-segregation to site specific high temperature deformation in single crystal nickel-base superalloy castings. Materials Science and Engineering: A, 773 . 138862. doi:10.1016/j.msea.2019.138862 ISSN 0921-5093.

Dale, Matthew W. and Wedge, Christopher (2016) Optically generated hyperpolarization for sensitivity enhancement in solution-state NMR spectroscopy. Chemical Communications, 52 (90). pp. 13221-13224. doi:10.1039/C6CC06651H ISSN 1359-7345.

Dallaston, Michael C., Zhao, Chengxi, Sprittles, James E. and Eggers, Jens (2021) Stability of similarity solutions of viscous thread pinch-off. Physical Review Fluids, 6 (10). 104004. doi:10.1103/PhysRevFluids.6.104004 ISSN 2469-990X.

Dan, Yaping, Lu, Ye, Kybert, Nicholas J., Luo, Zhengtang and Johnson, A. T. Charlie (2009) Intrinsic response of graphene vapor sensors. Nano Letters, Vol.9 (No.4). pp. 1472-1475. doi:10.1021/nl8033637 ISSN 1530-6984.

Dancer, Claire E. J., Spawton, J. N. F., Falco, S., Petrinic, N. and Todd, R. I. (2019) Characterisation of damage mechanisms in oxide ceramics indented at dynamic and quasi-static strain rates. Journal of the European Ceramic Society, 39 (15). pp. 4936-4945. doi:10.1016/j.jeurceramsoc.2019.06.054 ISSN 0955-2219.

Daneshkhah, Alireza, Stocks, Nigel G. and Jeffrey, Paul (2017) Probabilistic sensitivity analysis of optimised preventive maintenance strategies for deteriorating infrastructure assets. Reliability Engineering & System Safety, 163 . pp. 33-45. doi:10.1016/j.ress.2017.02.002 ISSN 0951-8320.

Dang, Hiep Vu and Živanović, Stana (2015) Experimental characterisation of walking locomotion on rigid level surfaces using motion capture system. Engineering structures, Volume 91 . pp. 141-154. doi:10.1016/j.engstruct.2015.03.003 ISSN 0141-0296.

Danial, Maarten, My-Nhi Tran, Carmen, Young, P. G. (Philip G.), Perrier, Sébastien and Jolliffe, Katrina A. (2013) Janus cyclic peptide–polymer nanotubes. Nature Communications, Volume 4 . Article number 2780. doi:10.1038/ncomms3780 ISSN 2041-1723.

Daniels, D. R. and Turner, Matthew S. (2007) Diffusion on membrane tubes : a highly discriminatory test of the Saffman-Delbruck theory. Langmuir, Vol.23 (No.12). pp. 6667-6670. doi:10.1021/la0635000 ISSN 0743-7463.

Das, Abhishek, Beaumont, Richard Adrian, Butterworth, Ian, Masters, Iain and Williams, D. K. (2020) High rate and temperature-dependent tensile characterisation with modelling for gap-bridged remote laser welded (RLW) joint using automotive AA5182 alloy. International Journal of Impact Engineering, 144 . 103672. doi:10.1016/j.ijimpeng.2020.103672 ISSN 0734-743X.

Das, Abhishek, Fritz, Robert,