Journal Article

UNSPECIFIED (1991) ANALYSIS OF SEMIRIGID STEEL FRAMES AND CRITERIA FOR THEIR DESIGN. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 18 (3). pp. 227-237. ISSN 0143-974X.

UNSPECIFIED (1994) CALIBRATION OF SAFETY FACTORS GAMMA-M FOR COMPOSITE STEEL AND CONCRETE BEAMS IN BENDING. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 104 (2). pp. 193-203. ISSN 0965-0911.

UNSPECIFIED (1994) COMPRESSION STRENGTH OF PULTRUDED FLAT SHEET MATERIAL. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 6 (2). pp. 185-200. ISSN 0899-1561.

UNSPECIFIED (2003) Compressive strength and hydration of wastepaper sludge ash-ground granulated blastfurnace slag blended pastes. CEMENT AND CONCRETE RESEARCH, 33 (8). pp. 1189-1202. doi:10.1016/S0008-8846(03)00042-5 ISSN 0008-8846.

UNSPECIFIED (1997) Corrugated webs in plate girders for bridges. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 122 (2). pp. 157-164. ISSN 0965-0911.

UNSPECIFIED (2003) Cracking of continuous composite beams with precast decks. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 59 (2). pp. 201-214. ISSN 0143-974X.

UNSPECIFIED (1998) Domestic water supply using rainwater harvesting. BUILDING RESEARCH AND INFORMATION, 26 (2). pp. 94-101. ISSN 0961-3218.

UNSPECIFIED (2005) Durability and simulated ageing of new matrix glass fibre reinforced concrete. CEMENT & CONCRETE COMPOSITES, 27 (9-10). pp. 875-884. doi:10.1016/j.cemconcomp.2005.04.002 ISSN 0958-9465.

UNSPECIFIED (1988) EUROCODE-4. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 1-DESIGN AND CONSTRUCTION, 84 . pp. 787-819. ISSN 0307-8353.

UNSPECIFIED (2002) Effect of mix retention and curing on low-cement walling blocks. BUILDING RESEARCH AND INFORMATION, 30 (5). pp. 362-366. doi:10.1080/09613210210151008 ISSN 0961-3218.

UNSPECIFIED (1998) Existing rules and new tests for stud shear connectors in troughs of profiled sheeting. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 128 (3). pp. 244-251. ISSN 0965-0911.

UNSPECIFIED (2005) Exploring social capital in the construction firm. BUILDING RESEARCH AND INFORMATION, 33 (3). pp. 235-244. doi:10.1080/09613210500117853 ISSN 0961-3218.

UNSPECIFIED (1997) Local flange buckling in plate girders with corrugated webs. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 122 (2). pp. 148-156. ISSN 0965-0911.

UNSPECIFIED (2000) Microstructural observations in new matrix glass fibre reinforced cement. CEMENT AND CONCRETE RESEARCH, 30 (11). pp. 1747-1753. ISSN 0008-8846.

UNSPECIFIED (1998) Models and design rules for stud shear connectors in troughs of profiled sheeting. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 128 (3). pp. 252-263. ISSN 0965-0911.

UNSPECIFIED (2004) Noncontact ultrasonic diagnostics in concrete: A preliminary investigation. CEMENT AND CONCRETE RESEARCH, 34 (7). pp. 1185-1188. doi:10.1016/j.cemconres.2003.12.012 ISSN 0008-8846.

UNSPECIFIED (1994) PERFORMANCE OF COMPOSITE CONNECTIONS - MAJOR AXIS END-PLATE JOINTS. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 31 (1). pp. 31-57. ISSN 0143-974X.

UNSPECIFIED (2003) Physical testing for concentrically loaded columns of pultruded glass fibre reinforced plastic profile. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 156 (2). pp. 205-219. ISSN 0965-0911.

UNSPECIFIED (2001) Prediction of the initial stiffness of ductile end-plate steel connections. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 146 (1). pp. 17-29. ISSN 0965-0911.

UNSPECIFIED (2002) Preliminary investigations of the dimensional stability of super-critically carbonated glass fibre reinforced cement. CEMENT AND CONCRETE RESEARCH, 32 (10). pp. 1639-1644. ISSN 0008-8846.

UNSPECIFIED (1995) RESISTANCE TO LONGITUDINAL SHEAR OF COMPOSITE BEAMS WITH PROFILED SHEETING. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 110 (2). pp. 204-215. ISSN 0965-0911.

UNSPECIFIED (1988) RURAL NETWORKING IN SIERRA LEONE. APPROPRIATE TECHNOLOGY, 15 (3). pp. 24-25. ISSN 0305-0920.

UNSPECIFIED (2000) Resistance of stud shear connectors to fatigue. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 56 (2). pp. 101-116. ISSN 0143-974X.

UNSPECIFIED (1984) SHEAR TRANSFER ACROSS CRACKS IN REINFORCED-CONCRETE DUE TO AGGREGATE INTERLOCK AND TO DOWEL ACTION. MAGAZINE OF CONCRETE RESEARCH, 36 (126). pp. 9-21. ISSN 0024-9831.

UNSPECIFIED (1985) SHEAR TRANSFER IN CRACKED REINFORCED-CONCRETE. MAGAZINE OF CONCRETE RESEARCH, 37 (130). pp. 3-15. ISSN 0024-9831.

UNSPECIFIED (1993) STABILITY OF CONTINUOUS COMPOSITE PLATE GIRDERS WITH U-FRAME ACTION. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 99 (2). pp. 187-197. ISSN 0965-0911.

UNSPECIFIED (1993) STRENGTH AND STIFFNESS OF DISCRETE U-FRAMES IN COMPOSITE PLATE GIRDERS. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 99 (2). pp. 199-209. ISSN 0965-0911.

UNSPECIFIED (2004) Simple durability test for cement stabilized blocks. BUILDING RESEARCH AND INFORMATION, 32 (2). pp. 140-145. doi:10.1080/0961321032000148479 ISSN 0961-3218.

UNSPECIFIED (1997) Soilcrete blocks - Experimental work to determine whether cement or compaction pressure is more effective. BUILDING RESEARCH AND INFORMATION, 25 (4). pp. 202-209. ISSN 0961-3218.

UNSPECIFIED (1997) Stiffness and strength of lateral restraints to compressed flanges. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 42 (2). pp. 73-93. ISSN 0143-974X.

UNSPECIFIED (2001) Structural properties of composite major axis end plate connections. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 57 (3). pp. 327-349. ISSN 0143-974X.

UNSPECIFIED (2002) When should shear-flexible stability functions be used in elastic structural analysis? PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 152 (1). pp. 31-40. ISSN 0965-0911.

UNSPECIFIED (1999) Wind-moment steel frames with standard ductile connections. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 52 (3). pp. 255-268. ISSN 0143-974X.

Adha, Augusta, Pamuncak, Arya Panji, Qiao, Wen and Laory, Irwanda (2022) Automated building classification framework using convolutional neural network. Cogent Engineering, 9 (1). doi:10.1080/23311916.2022.2065900 ISSN 2331-1916.

Agg, Chloe and Khimji, Samana (2021) Perception of wellbeing in educational spaces. Building Services Engineering Research and Technology, 42 (6). pp. 677-689. doi:10.1177/01436244211009828 ISSN 1477-0849.

Al Hamd, Rwayda Kh. S. , Gillie, Martin, Warren, Holly, Torelli, Giacomo, Stratford, Tim and Wang, Yong (2018) The effect of load induced thermal strain on flat slab behaviour at elevated 1 temperatures. Fire Safety Journal, 97 . pp. 12-18. doi:10.1016/j.firesaf.2018.02.004 ISSN 0379-7112.

Ali, Syed Zeeshan, De Luca, Andrea, Hopper, Richard, Boual, Sophie, Gardner, J. W. and Udrea, Florin (2015) A low-power, low-cost infra-red emitter in CMOS technology. IEEE Sensors Journal, 15 . pp. 6775-6782. ISSN 1530-437X.

Altaee, Mohammed J., Cunningham, Lee S. and Gillie, Martin (2017) Experimental investigation of CFRP-strengthened steel beams with web openings. Journal of Constructional Steel Research, 138 . pp. 750-760. doi:10.1016/j.jcsr.2017.08.023 ISSN 0143-974X.

Barari, Amin, Zeng, Xiangwu, Rezania, Mohammad and Ibsen, Lars Bo (2021) Three-dimensional modeling of monopiles in sand subjected to lateral loading under static and cyclic conditions. Geomechanics and Engineering, 26 (2). pp. 175-190. doi:10.12989/gae.2021.26.2.175 ISSN 2092-6219.

Bloodworth, Alan G., Cao, J. and Xu, M. (2012) Numerical modelling of shear behaviour of reinforced concrete pile caps. Journal of Structural Engineering, 138 (6). pp. 708-717. doi:10.1061/(ASCE)ST.1943-541X.0000499 ISSN 0733-9445.

Champion, A. G., Green, Anne E. and Owen, David (1990) A reply to David Stern : exploration before explanation of local house price variations. Area , Volume 22 (Number 2). pp. 169-170. ISSN 0004-0894.

Chan, Tak-Ming and Gardner, L. (Leroy) (2009) Flexural buckling of elliptical hollow section columns. Journal of Structural Engineering, Vol.135 (No.5). pp. 546-557. doi:10.1061/(ASCE)ST.1943-541X.0000005 ISSN 0733-9445.

Critoph, Robert E. and Pacho, Angeles M. Rivero (2022) District heating of buildings by renewable energy using thermochemical heat transmission. Energies, 15 (4). e1449. doi:10.3390/en15041449 ISSN 1996-1073.

Dahlmann, Frederik and Veal, Gareth (2016) The role of umbrella agreements in achieving sustainability goals : energy efficiency at the Empire State building. Journal of Green Building, 11 (1). pp. 71-94. doi:10.3992/jgb.11.1.71.1 ISSN 1552-6100.

Dimitrokali, Elisavet, MacKrill, James B., Jennings, P. A. (Paul A.), Khanna, Sorab , Harris, Vaughn and Cain, Rebecca (2015) Exploring homeowners' perception and experiences in using a domestic smart home heating controller. Indoor and Built Environment , 24 (7). pp. 1010-1032. doi:10.1177/1420326X15606186 ISSN 1420-326X.

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L., Corrochano, D. G. and Yoon, J. I. (2018) Challenges of micro/mild hybridisation for construction machinery and applicability in UK. Renewable and Sustainable Energy Reviews , 91 . pp. 301-320. doi:10.1016/j.rser.2018.03.027 ISSN 1879-0690.

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part A : fundamental concepts and design. Energies, 10 (7). 962. doi:10.3390/en10070962 ISSN 1996-1073.

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part B : a real-time comparative study. Energies, 10 (9). 1250. doi:10.3390/en10091250 ISSN 1996-1073.

Dombrovsky, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2018) An infrared scattering by evaporating droplets at the initial stage of a pool fire suppression by water sprays. Infrared Physics & Technology, 91 . pp. 55-62. doi:10.1016/j.infrared.2018.03.027 ISSN 1350-4495.

Dombrovsky, Leonid A., Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step method for radiative transfer calculations in a developing pool fire at the initial stage of its suppression by a water spray. International Journal of Heat and Mass Transfer, 127 (Part B). pp. 717-726. doi:10.1016/j.ijheatmasstransfer.2018.07.095 ISSN 0017-9310.

Evernden, M. C. and Mottram, J. Toby (2012) A case for houses in the UK to be constructed of fibre reinforced polymer components. Institution of Civil Engineers. Proceedings. Construction Materials, 165 (1). pp. 3-13. doi:10.1680/coma.2012.165.1.3 ISSN 1747-650X.

Fukumoto, Kazui, Wang, Changjian and Wen, Jennifer X. (2018) Large eddy simulation of upward flame spread on PMMA walls with a fully coupled fluid–solid approach. Combustion and Flame, 190 . pp. 365-387. doi:10.1016/j.combustflame.2017.11.012 ISSN 0010-2180.

Garcia, Reyes, Guadagnini, Maurizio, Pilakoutas, Kypros and Pech Poot, Luis Alberto (2016) FRP strengthening of substandard lap-spliced RC members : a comprehensive survey. Advances in Structural Engineering, 20 (6). pp. 976-1001. doi:10.1177/1369433216668362 ISSN 1369-4332.

Garcia, Reyes, Hajirasouliha, Iman, Guadagnini, Maurizio, Helal, Yasser, Jemaa, Yaser, Pilakoutas, Kypros, Mongabure, Philippe, Chrysostomou, Christis, Kyriakides, Nicholas, Ilki, Alper, Budescu, Mihai, Taranu, Nicolae, Ciupala, Mihaela Anca, Torres, Lluis and Saiidi, M. (2014) Full-scale shaking table tests on a substandard RC building repaired and strengthened with post-tensioned metal straps. Journal of Earthquake Engineering, 18 (2). pp. 187-213. doi:10.1080/13632469.2013.847874 ISSN 1363-2469.

Garcia, Reyes, Hajirasouliha, Iman and Pilakoutas, Kypros (2010) Seismic behaviour of deficient RC frames strengthened with CFRP composites. Engineering Structures, 32 (10). pp. 3075-3085. doi:10.1016/j.engstruct.2010.05.026 ISSN 0141-0296.

Garcia, Reyes, Jemaa, Yaser, Helal, Yasser, Guadagnini, Maurizio and Pilakoutas, Kypros (2014) Seismic strengthening of severely damaged beam-column RC joints using CFRP. Journal of Composites for Construction, 18 (2). doi:10.1061/(ASCE)CC.1943-5614.0000448 ISSN 1090-0268.

Garcia, Reyes, Pilakoutas, Kypros, Hajirasouliha, Iman, Guadagnini, Maurizio, Kyriakides, Nicholas and Ciupala, Mihaela Anca (2017) Seismic retrofitting of RC buildings using CFRP and post-tensioned metal straps : shake table tests. Bulletin of Earthquake Engineering, 15 (8). pp. 3321-3347. doi:10.1007/s10518-015-9800-8 ISSN 1570-761X.

Garcia, Reyes, Sullivan, Timothy J. and Della Corte, Gaetano (2010) Development of a displacement based design method for steel frame-RC wall buildings. Journal of Earthquake Engineering, 14 (2). pp. 252-277. doi:10.1080/13632460902995138 ISSN 1363-2469.

Gardner, L. (Leroy), Chan, Tak-Ming and Wadee, M. A. (2008) Shear response of elliptical hollow sections. Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol.161 (No.6). pp. 301-309. doi:10.1680/stbu.2008.161.6.301 ISSN 0965-0911.

Gaylard, A. P., Kirwan, Kerry and Lockerby, Duncan A. (2017) Surface contamination of cars : a review. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, 231 (9). pp. 1160-1176. doi:10.1177/0954407017695141 ISSN 0954-4070.

Grant, Wyn (2005) The provision of fire services in rural areas. Public Policy and Administration, Vol.20 (No.1). pp. 67-79. doi:10.1177/095207670502000105 ISSN 0952-0767.

Guerra, Valentina and McNally, Tony (2020) Surface cleaning of 2D materials : Boron Nitride Nanosheets (BNNS) and exfoliated Graphite Nanoplatelets (GNP). Advanced Materials Interfaces, 7 (19). 2000944. doi:10.1002/admi.202000944 ISSN 2196-7350.

Hafner, Rebecca J., Elmes, David and Read, Daniel (2019) Exploring the role of messenger effects and feedback frames in promoting uptake of energy-efficient technologies. Current Psychology, 38 . pp. 1601-1612. doi:10.1007/s12144-017-9717-2 ISSN 1046-1310.

Han, Jiaqiang, Geng, Pengqiang, Wang, Zihao, Lu, Yuhan, Wang, Fei, Wen, Jennifer X. and Liu, Fang (2022) Effect of ceiling extraction on the smoke spreading characteristics and temperature profiles in a tunnel with one closed end. Tunnelling and Underground Space Technology, 119 . 104236. doi:10.1016/j.tust.2021.104236 ISSN 0886-7798.

Han, Jiaqiang, Wang, Zihao, Geng, Pengqiang, Wang, Fei, Wen, Jennifer X. and Liu, Fang (2021) The effect of blockage and tunnel slope on smoke spread and ceiling temperature distribution in a natural-ventilated metro depot. Energy and Buildings, 253 . 111540. doi:10.1016/j.enbuild.2021.111540 ISSN 0378-7788.

Hicks, Stephen J., Braun, Matthias, Markovic, Zlatko and Way, James (2022) New Eurocode 4 design rules for shallow floor construction. ce/papers, 5 (4). pp. 1-6. doi:10.1002/cepa.1884 ISSN 2509-7075.

Huang, Xianjia, Wang, Yuhong, Zhu, He, He, Le, Tang, Fei and Wen, Jennifer X. (2021) Experimental study on the radiant heat flux of wall-attached fire plume generated by rectangular sources. International Journal of Thermal Sciences, 159 . 106605. doi:10.1016/j.ijthermalsci.2020.106605 ISSN 1290-0729.

Hutchins, David A., Watson, Richard, Davis, Lee A. J., Akanji, Lolu, Billson, Duncan R., Burrascano, Pietro, Laureti, Stefano and Ricci, Marco (2020) Ultrasonic propagation in highly attenuating insulation materials. Sensors, 20 (8). e2285. doi:10.3390/s20082285 ISSN 1424-8220.

Imjai, Thanongsak, Guadagnini, Maurizio, Pilakoutas, Kypros, Garcia, Reyes, Sukontasukkul, Piti and Limkatanyu, Suchart (2021) A practical macro-mechanical model for the bend capacity of fibre-reinforced polymer bars. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 174 (10). p. 824. doi:10.1680/jstbu.19.00135 ISSN 0965-0911.

Imjai, Thanongsak, Setkit, Monthian, Garcia, Reyes and Figueiredo, Fabio P. (2020) Strengthening of damaged low strength concrete beams using PTMS or NSM techniques. Case Studies in Construction Materials, 13 (e00403). doi:10.1016/j.cscm.2020.e00403 ISSN 2214-5095.

Jenkins, D. P., Singh, H. and Eames, Philip C. (2009) Interventions for large-scale carbon emission reductions in future UK offices. Energy and Buildings, Vol.41 (No.12). pp. 1374-1380. doi:10.1016/j.enbuild.2009.08.002 ISSN 0378-7788.

Johnson, R. P. (Roger Paul) (2008) Calibration of resistance of shear connectors in troughs of profiled sheeting. Institution of Civil Engineers. Proceedings. Structures and Buildings, Vol.161 (No.3). pp. 117-126. doi:10.1680/stbu.2008.161.3.117 ISSN 0965-0911.

Johnson, R. P. (Roger Paul), Lazenby, David and Menzies, J. B. (2012) Discussion : Eurocodes, 1970-2010: why 40 years? Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol.166 (No.5). pp. 268-270. doi:10.1680/stbu.2009.162.6.371 ISSN 0965-0911.

Karavasilis, Theodore L. (2016) Assessment of capacity design of columns in steel moment resisting frames with viscous dampers. Soil Dynamics and Earthquake Engineering, 88 . pp. 215-222. doi:10.1016/j.soildyn.2016.06.006 ISSN 0267-7261.

Kargin, Madi, Lukpanov, Rauan, Serenkov, Andrey, Shaymagambetov, Yerkin, Kargin, Jumat, Garcia, Reyes and Laory, Irwanda (2023) An innovative structural health assessment tool for existing precast concrete buildings using deep learning methods and thermal infrared satellite imagery. Journal of Civil Structural Health Monitoring . doi:10.1007/s13349-022-00655-4 ISSN 2190-5479. (In Press)

Breathe collaborators (Including: Khan, Iftekhar, Maredza, Mandy, Dritsaki, Melina, Mistry, Dipesh, Lall, Ranjit, Lamb, Sally, Couper, Keith, Gates, Simon, Perkins, Gavin D. and Petrou, Stavros). (2020) Is protocolised weaning that includes early extubation onto non-invasive ventilation more cost effective than protocolised weaning without non-invasive ventilation? Findings from the Breathe Study. PharmacoEconomics - Open, 4 . pp. 697-710. doi:10.1007/s41669-020-00210-1 ISSN 2509-4262.

Khodadadi Azadboni, Reza, Heidari, Ali, Boeck, Lorenz R. and Wen, Jennifer X. (2019) The effect of concentration gradients on deflagration-to-detonation transition in a rectangular channel with and without obstructions – a numerical study. International Journal of Hydrogen Energy, 44 (13). pp. 7032-7040. doi:10.1016/j.ijhydene.2019.01.157 ISSN 0360-3199.

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2020) Numerical analysis of flame acceleration and onset of detonation in homogenous and inhomogeneous mixture. Journal of Loss Prevention in the Process Industries, 64 . 104063. doi:10.1016/j.jlp.2020.104063 ISSN 0950-4230.

Kucukler, Merih (2020) Lateral instability of steel beams in fire : behaviour, numerical modelling and design. Journal of Constructional Steel Research, 170 . 106095. doi:10.1016/j.jcsr.2020.106095 ISSN 0143-974X.

Kucukler, Merih, Gardner, Leroy and Bub, Yidu (2020) Flexural-torsional buckling of austenitic stainless steel I-section beam-columns : testing, numerical modelling and design. Thin-Walled Structures, 152 . 106572. doi:10.1016/j.tws.2019.106572 ISSN 0263-8231.

Kucukler, Merih, Xing , Zhe and Gardner, Leroy (2020) Behaviour and design of stainless steel columns in fire. Journal of Constructional Steel Research, 165 . 105890. doi:10.1016/j.jcsr.2019.105890 ISSN 0143-974X.

Lewis, W. J. (Wanda J.) (2008) Computational form-finding methods for fabric structures. Proceedings of the ICE - Engineering and Computational Mechanics, Vol.161 (No.3). pp. 139-149. doi:10.1680/eacm.2008.161.3.139 ISSN 1755-0777.

Lewis, W. J. (Wanda J.) (2012) Modelling of fabric structures and associated design issues. Journal of Architectural Engineering, Volume 19 (Number 2). pp. 81-88. doi:10.1061/(ASCE)AE.1943-5568.0000097 ISSN 1076-0431.

Lowes, Richard, Woodman, Bridget and Fitch-Roy, Oscar (2019) Policy change, power and the development of Great Britain's Renewable Heat Incentive. Energy Policy, 131 . pp. 410-421. doi:10.1016/j.enpol.2019.04.041 ISSN 0301-4215.

Lu, Wei, Duan, Qiangling, Chen, Haodong, Li, Huang, Liu, Yujun, Wang, Qingsong and Sun, Jinhua (2019) Thermal response and resistance optimization of various types of point-supported glass facades. Construction and Building Materials, 224 . pp. 610-621. doi:10.1016/j.conbuildmat.2019.07.032 ISSN 0950-0618.

Luukkonen, Tero, Yliniemi, Juho, Walkley, Brant, Geddes, Daniel, Griffith, Ben, Hanna, John V., Provis, John L., Kinnunen, Paivo and Illikainen, Mirja (2022) Characterization of an aged alkali-activated slag roof tile after 30 years of exposure to Northern Scandinavian weather. RSC Advances , 12 (40). pp. 25822-25832. doi:10.1039/D2RA04456K ISSN 2046-2069.

Ma, Chau Kun, Garcia, Reyes, Yung, Sofrie Chin Siew, Awang, Abdullah Zawawi, Omar, Wahid and Pilakoutas, Kypros (2019) Strengthening of pre-damaged HSC columns using post-tensioned steel straps. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 172 (10). pp. 703-711. doi:10.1680/jstbu.18.00031 ISSN 0965-0911.

Ma, Chau‐Khun, Awang, Abdullah Zawawi, Garcia, Reyes, Omar, Wahid and Pilakoutas, Kypros (2016) Behaviour of over‐reinforced high‐strength concrete beams confined with post‐tensioned steel straps – an experimental investigation. Structural Concrete, 17 (5). pp. 768-777. doi:10.1002/suco.201500062 ISSN 1464-4177.

McLaggan, M. S., Hadden, R. M. and Gillie, Martin (2018) Fire performance of phase change material enhanced plasterboard. Fire Technology, 54 (1). pp. 117-134. doi:10.1007/s10694-017-0675-x ISSN 0015-2684.

McMahon, Richard A., Santos, Hugo and Sobral Mourao, Zanaida (2018) Practical considerations in the deployment of ground source heat pumps in older properties - a case study. Energy & Buildings, 159 . pp. 54-65. ISSN 0378-7788.

Moss, Roger W. and Critoph, R. E. (2022) Optimisation of a recirculating domestic hot water system to minimise wait time and heat loss. Energy and Buildings, 260 . 111850. doi:10.1016/j.enbuild.2022.111850 ISSN 0378-7788.

Mottram, J. Toby (2011) Does performance based design with fibre reinforced polymer components and structures provide any new benefits and challenges? Structural Engineer, 89 (6). pp. 23-27. ISSN 1466-5123.

Mottram, J. Toby and Zafari, Behrouz (2011) Pin-bearing strengths for bolted connections in fibre-reinforced polymer structures. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 164 (5). pp. 291-305. doi:10.1680/stbu.2011.164.5.291 ISSN 0965-0911.

Murtaza, Hasan and Kucukler, Merih (2023) Fire design of steel columns through second-order inelastic analysis with strain limits. Thin-Walled Structures, 184 . 110458. doi:10.1016/j.tws.2022.110458 ISSN 0263-8231.

Nguyen, T.T., Selvaraj, S., Chan, T-M. and Mottram, J. Toby (2023) Influence of combined imperfections on lateral-torsional buckling behaviour of pultruded FRP beams. Composite Structures, 304 (Part 2). 116385. doi:10.1016/j.compstruct.2022.116385 ISSN 0263-8223.

Nicolini, Davide (2007) Studying visual practices in construction. Building Research and Information, Vol.35 (No.5). pp. 576-580. doi:10.1080/09613210701355732 ISSN 0961-3218.

Oliveira, Luis, Mitchell, Val and May, Andrew (2020) Smart home technology—comparing householder expectations at the point of installation with experiences 1 year later. Personal and Ubiquitous Computing, 24 . pp. 613-626. doi:10.1007/s00779-019-01302-4 ISSN 1617-4909.

Ormandy, David and Ezratty, Véronique (2016) Thermal discomfort and health : protecting the susceptible from excess cold and excess heat in housing. Advances in Building Energy Research, 10 (1). pp. 84-98. doi:10.1080/17512549.2015.1014845 ISSN 1751-2549 .

Pavić, Aleksandar, Miskovic, Z. and Živanović, Stana (2008) Modal properties of beam-and-block pre-cast floors. The IES Journal Part A: Civil & Structural Engineering, Vol.1 (No.3). pp. 171-185. doi:10.1080/19373260802155894 ISSN 1937-3260.

Petkova, Diana, Donchev, Ted and Wen, Jennifer X. (2014) Experimental study of the performance of CFRP strengthened small scale beams after heating to high temperatures. Construction and Building Materials, Volume 68 . pp. 55-61. doi:10.1016/j.conbuildmat.2014.06.014 ISSN 0950-0618.

Qureshi, Jawed and Mottram, J. Toby (2013) Behaviour of pultruded beam-to-column joints using steel web cleats. Thin-Walled Structures, 73 . pp. 48-56. doi:doi.org/10.1016/j.tws.2013.06.019 ISSN 0263-8231.

Raffoul, Samar, Escolano-Margarit, David, Garcia, Reyes, Guadagnini, Maurizio and Pilakoutas, Kypros (2019) Constitutive model for rubberized concrete passively confined with FRP laminates. Journal of Composites for Construction, 23 (6). 04019044. doi:10.1061/(ASCE)CC.1943-5614.0000972 ISSN 1090-0268.

Raffoul, Samar, Garcia, Reyes, Escolano-Margarit, David, Guadagnini, Maurizio, Hajirasouliha, Iman and Pilakoutas, Kypros (2017) Behaviour of unconfined and FRP-confined rubberised concrete in axial compression. Construction and Building Materials, 147 . pp. 388-397. doi:10.1016/j.conbuildmat.2017.04.175 ISSN 0950-0618.

Raffoul, Samar, Garcia, Reyes, Pilakoutas, Kypros, Guadagnini, Maurizio and Flores Medina, Nelson (2016) Optimisation of rubberised concrete with high rubber content : an experimental investigation. Construction and Building Materials, 124 . pp. 391-404. doi:10.1016/j.conbuildmat.2016.07.054 ISSN 0950-0618.

Rezania, Mohammad and Bagheri, Meghdad (2021) Geological and geotechnical characteristics of London clay from the Isle of Sheppey. Geotechnical and Geological Engineering, 39 . pp. 1701-1713. doi:10.1007/s10706-020-01572-3 ISSN 0960-3182.

Rezania, Mohammad and Dejaloud, Hesam (2021) BS-CLAY1 : anisotropic bounding surface constitutive model for natural clays. Computers and Geotechnics, 135 . doi:10.1016/j.compgeo.2021.104099 ISSN 0266-352X.

Russell, A. R., Vo, Thanh Liem, Ayala, J., Wang, Y., Reid, D. and Fourie, A. B. (2022) Cone penetration tests in saturated and unsaturated silty tailings. Geotechnique . doi:10.1680/jgeot.21.00261 ISSN 0016-8505. (In Press)

Russell, J. M., Owen, J. S. and Hajirasouliha, I. (2019) Dynamic column loss analysis of reinforced concrete flat slabs. Engineering Structures, 198 . 109453. doi:10.1016/j.engstruct.2019.109453 ISSN 0141-0296.

Russell, Justin, Sagaseta, J., Cormie, D. and Jones, A. E. K. (2019) Historical review of prescriptive design rules for robustness after the collapse of Ronan Point. Structures, 20 . pp. 365-373. doi:10.1016/j.istruc.2019.04.011 ISSN 2352-0124.

Shahabpoor, E., Pavic, A., Racic, V. and Živanović, Stana (2017) Effect of group walking traffic on dynamic properties of pedestrian structures. Journal of Sound and Vibration, 387 . pp. 207-225. doi:10.1016/j.jsv.2016.10.017 ISSN 0022-460X.

Singh, Anubhav, Reynolds, Neil, Carnegie, Craig Robert , Micallef, Christopher, Keating, Elspeth, Winnett, James, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2019) A novel route for volume manufacturing of hollow braided composite beam structures. Advanced Manufacturing: Polymer & Composites Science, 5 (4). 224-229 . doi:10.1080/20550340.2019.1680514 ISSN 2055-0340.

Su, Jiang and Bloodworth, Alan G. (2019) Simulating composite behaviour in SCL tunnels with sprayed waterproofing membrane interface : a state-of-the-art review. Engineering Structures, 191 . pp. 698-710. doi:10.1016/j.engstruct.2019.04.067 ISSN 0141-0296.

Suwondo, Riza, Cunningham, Lee, Gillie, Martin and Bailey, Colin (2018) Improving the performance of composite floors subjected to post-earthquake fire. Fire Safety Journal, 102 . pp. 18-26. doi:10.1016/j.firesaf.2018.10.004 ISSN 0379-7112.

Suwondo, Riza, Gillie, Martin, Cunningham, Lee and Bailey, Colin (2018) Effect of earthquake damage on the behaviour of composite steel frames in fire. Advances in Structural Engineering, 21 (16). pp. 2589-2604. doi:10.1177/1369433218761138 ISSN 1369-4332.

Tamainot-Telto, Zacharie (2016) Novel method using Dubinin-Astakhov theory in sorption reactor design for refrigeration and heat pump applications. Applied Thermal Engineering, 107 . pp. 1123-1129. doi:10.1016/j.applthermaleng.2016.07.073 ISSN 1359-4311.

Tamainot-Telto, Zacharie, Metcalf, Steven J. and Ng Yande, Neilson (2022) Adsorption solar air conditioning system for Singapore climate. Energies, 15 (18). 6537. doi:10.3390/en15186537 ISSN 1996-1073.

Tang, Fei, Hu, Peng, He, Qing, Zhang, Jianping and Wen, Jennifer X. (2021) Effect of sidewall on the flame extension characteristics beneath a ceiling induced by carriage fire in a channel. Combustion and Flame, 223 . pp. 202-215. doi:10.1016/j.combustflame.2020.09.020 ISSN 0010-2180.

Tang, Fei, Hu, Peng and Wen, Jennifer X. (2022) Flame evolution and radiation hazards of rectangular fires between two parallel walls. Proceedings of the Combustion Institute . doi:10.1016/j.proci.2022.09.035 ISSN 1540-7489. (In Press)

Tang, Fei, Hu, Peng, Zhang, Jianping and Wen, Jennifer X. (2021) Heat fluxes under the ceiling induced by wall fires with various burner aspect ratios in a channel. Proceedings of the Combustion Institute, 38 (3). pp. 4569-4577. doi:10.1016/j.proci.2020.05.029 ISSN 1540-7489.

Tiele, Akira, Esfahani, Siavash and Covington, James A. (2018) Design and development of a low-cost, portable monitoring device for indoor environment quality. Journal of Sensors, 2018 . 5353816. doi:10.1155/2018/5353816 ISSN 1687-7268.

Tkachenko, Nataliya, Bricker, Stephanie and Jarvis, Stephen A. (2015) To dig or not to dig? Place and perception in subsurface housing. Proceedings of the Institution of Civil Engineers - Engineering Sustainability . doi:10.1680/jensu.15.00019 ISSN 1478-4629.

Tong, Xin and Zhao, Xiaowei (2018) Passive vibration control of the SCOLE beam system. Structural Control and Health Monitoring, 25 (8). e2204. doi:10.1002/stc.2204 ISSN 1545-2263.

Torelli, Giacomo, Gillie, Martin, Mandal, Parthasarathi and Tran, Van-Xuan (2017) A multiaxial load-induced thermal strain constitutive model for concrete. International Journal of Solids and Structures, 108 . pp. 115-125. doi:10.1016/j.ijsolstr.2016.11.017 ISSN 0020-7683.

Torelli, Giacomo, Mandal, Partha, Gillie, Martin and Tran, Van-Xuan (2018) A confinement-dependent load-induced thermal strain constitutive model for concrete subjected to temperatures up to 500°C. International Journal of Mechanical Sciences, 144 . pp. 887-896. doi:10.1016/j.ijmecsci.2017.12.054 ISSN 0020-7403.

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2016) Concrete strains under transient thermal conditions : a state-of-the-art review. Engineering Structures, 127 . pp. 172-188. doi:10.1016/j.engstruct.2016.08.021 ISSN 0141-0296.

Truong, Dinh Quang, Yoon, Jong II, Marco, James, Jennings, P. A. (Paul A.), Ahn, Kyoung Kwan and Ha, Cheolkeun (2017) Sensorless force feedback joystick control for teleoperation of construction equipment. International Journal of Precision Engineering and Manufacturing, 18 (7). pp. 955-969. doi:10.1007/s12541-017-0113-5 ISSN 2234-7593.

Trương, Đình Quang, Truong, Bui Ngoc Minh, Trung, Nguyen Thanh, Nahian, Syed Abu and Ahn, Kyoung Kwan (2017) Force reflecting joystick control for applications to bilateral teleoperation in construction machinery. International Journal of Precision Engineering and Manufacturing, 18 (3). pp. 301-315. doi:10.1007/s12541-017-0038-z ISSN 2234-7593.

Tzimas, Angelos S., Kamaris, Geordios, Karavasilis, Theodore L. and Galasso, C. (2016) Collapse risk and residual drift performance of steel buildings using post-tensioned MRFs and viscous dampers in near-fault regions. Bulletin of Earthquake Engineering, 14 (6). pp. 1643-1662. doi:10.1007/s10518-016-9898-3 ISSN 1570-761X.

Ukairo, Okorie, Dembele, Siaka, Heidari, Ali, Pretrel, Hugues and Wen, Jennifer X. (2021) Investigation of fires in a mechanically ventilated compartment using the CFD code FireFOAM. Nuclear Engineering and Design, 384 . 111515. doi:10.1016/j.nucengdes.2021.111515 ISSN 0029-5493.

Vasdravellis, George, Baiguera , M. and Karavasilis, Theodore L. (2016) Dual seismic-resistant steel frame with high post-yield stiffness braces for residual drift reduction : numerical evaluation. Journal of Constructional Steel Research, 122 . pp. 198-212. doi:10.1016/j.jcsr.2016.03.019 ISSN 0143-974X.

Wang, C. J., Liu, H. R. and Wen, Jennifer X. (2017) An improved PaSR-based soot model for turbulent fires. Applied Thermal Engineering . doi:10.1016/j.applthermaleng.2017.10.129 ISSN 1359-4311.

Wang, C. J., Wen, Jennifer X. and Chen, Z. B. (2014) Simulation of large-scale LNG pool fires using FireFOAM. Combustion Science and Technology, Volume 186 (Number 10-11). pp. 1632-1649. doi:10.1080/00102202.2014.935615 ISSN 0010-2202.

Wang, Shuyi, Su, Daizhong, Wu, You and Chai, Zijian (2020) Application of life-cycle assessment to the eco-design of LED lighting products. Euro-Mediterranean Journal for Environmental Integration, 5 (2). 41. doi:10.1007/s41207-020-00180-0 ISSN 2365-6433.

Wang, Yang and He, Wei (2021) Temporospatial techno-economic analysis of heat pumps for decarbonising heat of Great Britain. Energy and Buildings, 250 . 111198. doi:10.1016/j.enbuild.2021.111198 ISSN 0378-7788.

Wang, Yang and He, Wei (2021) Temporospatial techno-economic analysis of heat pumps for decarbonising heating in Great Britain. Energy and Buildings, 250 . 111198. doi:10.1016/j.enbuild.2021.111198 ISSN 0378-7788.

Wibowo, Andi Prasetiyo, Adha, Augusta, Kurniawan, Ibnu F. and Laory, Irwanda (2022) Wall crack multiclass classification : expertise-based dataset construction and learning algorithms performance comparison. Buildings, 12 (12). 2135. doi:10.3390/buildings12122135 ISSN 2075-5309.

Xing , Zhe, Kucukler, Merih and Gardner, Leroy (2020) Local buckling of stainless steel plates in fire. Thin-Walled Structures, 148 . p. 106570. doi:10.1016/j.tws.2019.106570 ISSN 0263-8231.

Xu, Baopeng and Wen, Jennifer X. (2022) Computational analysis of the mechanisms and characteristics for pulsating and uniform flame spread over liquid fuel at subflash temperatures. Combustion and Flame, 238 . 111933. doi:10.1016/j.combustflame.2021.111933 ISSN 0010-2180.

Zafari, Behrouz and Mottram, J. Toby (2015) Characterization by full-size testing of pultruded frame joints for the Startlink house. Journal of Composites in Construction , 19 (1). pp. 1-9. doi:10.1061/(ASCE)CC.1943-5614.0000488 ISSN 1090-0268 .

Zanardini, Elisabetta, May, Eric, Purdy, Kevin J. and Murrell, J. Colin (2019) Nutrient cycling potential within microbial communities on culturally important stoneworks. Environmental Microbiology Reports, 11 (2). pp. 147-154. doi:10.1111/1758-2229.12707 ISSN 1758-2229.

Zhao, Xiaowei and Weiss, George (2017) Stability properties of coupled impedance passive LTI systems. IEEE Transactions on Automatic Control, 62 (11). 5769 -5779. doi:10.1109/TAC.2017.2694558 ISSN 0018-9286.

Zhao, Zunxin, Tang, Fei, Chen, Lei, Zhang, Jianping and Wen, Jennifer X. (2023) Effect of parallel curtain walls on upward flame spread characteristics and mass loss rate over PMMA. Fire Technology, 59 . pp. 53-72. doi:10.1007/s10694-021-01179-x ISSN 0015-2684.

Zhou, Dan, (Researcher in engineering), Zhao, Changying and Tian, Y. (Yuan) (2012) Review on thermal energy storage with phase change materials (PCMs) in building applications. Applied Energy, Vol.92 . pp. 593-605. doi:10.1016/j.apenergy.2011.08.025 ISSN 03062619.

Živanović, Stana and Pavić, Aleksandar (2009) Probabilistic modeling of walking excitation for building floors. Journal of Performance of Constructed Facilities, Vol.23 (No.3). pp. 132-143. doi:10.1061/(ASCE)CF.1943-5509.0000005 ISSN 0887-3828.

Book Item

Georgiou, Lefteris, Racic, Vitomir, Brownjohn, James M. W. and Elliott, Mark T. (2015) Coordination of groups jumping to popular music beats. In: Caicedo , Juan and Pakzad, Shamim , (eds.) Dynamics of Civil Structures : Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015. Conference Proceedings of the Society for Experimental Mechanics Series, Volume 2 . Springer International, pp. 283-288. ISBN 9783319152479

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E. (2010) A new seismic design method for steel structures. In: Fardis, M.N., (ed.) Advances in Performance-Based Earthquake Engineering. Geotechnical, Geological and Earthquake Engineering, Vol.13 . Dordrecht, Netherlands: Springer Netherlands, pp. 161-171. ISBN 978-90-481-8745-4

Karavasilis, Theodore L., Ricles, James M., Sause, Richard and Chen, Cheng (2011) Experimental evaluation of the seismic performance of steel buildings with passive dampers using real-time hybrid simulation. In: Fardis, M.N. and Rakisevich, Z., (eds.) Role of Seismic Testing Facilities in Performance-Based Earthquake Engineering, SERIES Workshop. Geotechnical, Geological and Earthquake Engineering, Vol.22 . Dordrecht, Netherlands: Springer Netherlands, pp. 323-343. ISBN 978-94-007-1976-7

Lewis, W. J. (Wanda J.) (2009) Architectural fabrics. In: Forde, Michael C., (ed.) ICE Manual of Construction Materials. London, U.K.: Thomas Telford Ltd., pp. 873-886. ISBN 978-0-7277-3597-3

Lewis, W. J. (Wanda J.) and Brew, J. S. (2009) Stress computation, visualisation, and measurement in: 1. design of minimum energy forms of fabric enclosures and 2. painting conservation and novel artist materials. In: Inns, Thomas, (ed.) Designing for the 21st Century Volume 2: interdisciplinary methods and findings. Farnham, U.K.: Gower Publishing , pp. 322-341. ISBN 978-1-4094-0240-4

Mottram, J. Toby (2011) Review of Structural engineering failures: lessons for design by MacAlevey, Niall F. In: Structural Engineering Failures: Lessons for Design. Institution of Civil Engineering, p. 143.

Ricles, James M., Sause, Richard, Karavasilis, Theodore L. and Chen, Cheng (2010) Performance-based seismic design and experimental evaluation of steel MRFs with compressed elastomer dampers. In: Fardis, M. N., (ed.) Advances in Performance-Based Earthquake Engineering. Geotechnical, Geological and Earthquake Engineering, Vol.13 . Dordrecht, Netherlands: Springer Netherlands, pp. 277-286. ISBN 978-90-481-8745-4

Conference Item

UNSPECIFIED (1990) AIR INFILTRATION AND VENTILATION CENTERS GUIDE TO AIR EXCHANGE-RATE AND AIRTIGHTNESS MEASUREMENT TECHNIQUES. In: SYMP ON AIR CHANGE RATE AND AIRTIGHTNESS IN BUILDINGS, ATLANTA, GA, APR 16-17, 1989. Published in: AIR CHANGE RATE AND AIRTIGHTNESS IN BUILDINGS, 1067 pp. 295-303. ISBN 0-8031-1451-6.

UNSPECIFIED (1994) Applications of the air infiltration and ventilation centre's numerical database. In: 15th AIVC Conference on the Role of Ventilation, BUXTON, ENGLAND, SEP 27-30, 1994. Published in: 15TH AIVC CONFERENCE - THE ROLE OF VENTILATION, PROCEEDINGS VOL 2 pp. 553-561. ISBN 0-946075-80-8.

UNSPECIFIED (2000) Composite construction in Europe: Recent developments. In: 6th ASCCS International Conference on Steel-Concrete Composite Structures, LOS ANGELES, CA, MAR 22, 2000-MAR 24, 2002. Published in: COMPOSITE AND HYBRID STRUCTURES, VOLS 1 AND 2 pp. 11-22. ISBN 0-9679749-0-9.

UNSPECIFIED (1996) Economic comparisons between simple and partial-strength design of braced steel frames BEHAVIOUR, STRENGTH AND DESIGN. In: 3rd International Workshop on Connections in Steel Structures - Behaviour, Strength and Design, TRENT, ITALY, MAY 29-31, 1995. Published in: CONNECTIONS IN STEEL STRUCTURES III pp. 527-533. ISBN 0-08-042821-5.

UNSPECIFIED (1996) Eurocode 4 and design of composite joints BEHAVIOUR, STRENGTH AND DESIGN. In: 3rd International Workshop on Connections in Steel Structures - Behaviour, Strength and Design, TRENT, ITALY, MAY 29-31, 1995. Published in: CONNECTIONS IN STEEL STRUCTURES III pp. 223-235. ISBN 0-08-042821-5.

UNSPECIFIED (1995) European insulated glass unit testing. In: Symposium on Science and Technology of Building Seals, Sealants, Glazing and Waterproofing, FT LAUDERDALE, FL, FEB 02-03, 1994. Published in: SCIENCE AND TECHNOLOGY OF BUILDING SEALS, SEALANTS, GLAZING, AND WATERPROOFING: FOURTH VOLUME, 1243 pp. 144-149. ISBN 0-8031-2008-7. ISSN 1071-5827.

UNSPECIFIED (2000) European recommendations for the design of composite joints. In: 6th ASCCS International Conference on Steel-Concrete Composite Structures, LOS ANGELES, CA, MAR 22, 2000-MAR 24, 2002. Published in: COMPOSITE AND HYBRID STRUCTURES, VOLS 1 AND 2 pp. 1191-1198. ISBN 0-9679749-0-9.

UNSPECIFIED (2003) Formation of thaumasite in synthetic cement mineral slurries. In: 1st International Conference on Thaumasite in Cementitious Materials, BLDG RES ESTABLISHMENT, WATFORD, ENGLAND, JUN, 2002. Published in: CEMENT & CONCRETE COMPOSITES, 25 (8). pp. 857-860. doi:10.1016/S0958-9465(03)00112-4 ISSN 0958-9465.

UNSPECIFIED (2005) Implementing change in construction project organizations: exploring the interplay between structure and agency. In: Workshop on Rethinking Construction - Managing Projects as Complex Social Settings, Univ Warwick, Coventry, ENGLAND, JUN 24, 2004. Published in: BUILDING RESEARCH AND INFORMATION, 33 (6). pp. 547-560. doi:10.1080/09613210500288837 ISSN 0961-3218.

UNSPECIFIED (2003) Implementing change: New management initiatives and their impact on company practices THE ORGANIZATION AND MANAGEMENT OF CONSTRUCTION. In: 10th International Symposium on Construction Innovation and Global Competitiveness, CINCINNATI, OH, SEP 09-13, 2002. Published in: CONSTRUCTION INNOVATION AND GLOBAL COMPETITIVENESS, VOLS 1 AND 2 pp. 99-110. ISBN 0-8493-1449-6.

UNSPECIFIED (2003) Knowledge management for project-based learning in construction THE ORGANIZATION AND MANAGEMENT OF CONSTRUCTION. In: 10th International Symposium on Construction Innovation and Global Competitiveness, CINCINNATI, OH, SEP 09-13, 2002. Published in: CONSTRUCTION INNOVATION AND GLOBAL COMPETITIVENESS, VOLS 1 AND 2 pp. 172-184. ISBN 0-8493-1449-6.

UNSPECIFIED (1993) MATHEMATICAL FORMULAS AS A MEDIUM FOR SHAPING MEMBRANE FORMS. In: 4th International Conference on Space Structures, UNIV SURREY, GUILDFORD, ENGLAND, SEP 05-10, 1993. Published in: SPACE STRUCTURES 4, VOL 1 pp. 907-915. ISBN 0-7277-1968-8.

Anderson, David (2005) Design of unbraced multi-storey steel frames. In: Symposium on Innovative and Sustainables Steel Construction Held in Honour ofd Patrick Dowling, Univ Surrey, Guildford, 23-24 Jun 2005. Published in: Journal of Constructional Steel Research, Volume 62 (Number 11 Special Issue). pp. 1171-1177. doi:10.1016/j.jcsr.2006.06.009 ISSN 0143-974X.

Bloodworth, Alan G., Houlsby, G. T., Burd, H. J. and Augarde, C. E. (2001) Three-dimensional modelling of the interaction between buildings and tunnelling operations. In: International Conference on the response of buildings to excavation-induced ground movements, London, United Kingdom, 17-18 Jul 2001. Published in: Proceedings of the International Conference on the response of buildings to excavation-induced ground movements

Cain, Rebecca, Marshall, Paul and Payne, Sarah R. (2011) Participatory design fit for the 21st century : improving the design of an emergency department in a UK hospital. In: IASDR 2011, Delft, The Netherlands, 31 Oct - 4 Nov 2011. Published in: Proceedings of the 4th World Conference on Design Research, IASDR 2011 ISBN 9789461907189.

Chan, Tak-Ming and Gardner, L. (Leroy) (2009) Structural performance of stainless steel oval hollow sections. In: 12th International Symposium on Tubular Structures, Shanghai, People's Republic of China, October 08-10, 2008. Published in: Tubular Structures XII pp. 535-543. ISBN 978-0-415-46853-4. ISSN 978-0-415-46853-4.

Dong, Hongyang, Edrah, Mohamed, Zhao, Xiaowei, Collu, Maurizio, Xu, Xue, Abhinav, K A and Lin, Zi (2020) Model-free semi-active structural control of floating wind turbines. In: 2020 Chinese Automation Congress (CAC), Shanghai, China, 6-8 Nov 2020 ISBN 9781728176871. doi:10.1109/CAC51589.2020.9327083 ISSN 2688-0938.

Evernden, M. C. and Mottram, J. Toby (2006) Characterization of unistrut connection method with pultruded fiber-reinforced polymer channels. In: International Conference on Innovative Materials and Technologies for Construction and Restoration, Lecce, Italy, 6-9 Jun 2004. Published in: Journal of Materials in Civil Engineering, 18 (5). pp. 700-709. doi:10.1061/(ASCE)0899-1561(2006)18:5(700) ISSN 0924-0136.

Farahi, E., Purnell, Phil and Short, N. R. (2007) Advanced calcareous ceramics via novel green processing and supercritical carbonation. In: International Conference on Sustainable Construction Materials and Technologies, Coventry University, Coventry, England, 11-13 Jun 2007. Published in: Sustainable Construction Materials and Technologies pp. 359-366. ISBN 9780415446891.

Hicks, Stephen J., Uy, Brian and Kang, Won-Hee (2017) The new joint Australian and New Zealand design standard for steel and composite bridge AS/NZS 5100.6 - Part 6 : Steel and Composite Construction. In: 8th International Conference on Composite Construction in Steel and Concrete, Wyoming, 29 Jul-2 Aug 2017. Published in: Proceedings of the Eighth International Conference on Composite Construction in Steel and Concrete pp. 98-108. ISBN 9781564240620.

Johnson, R. P. (Roger Paul) (2009) Design rules for distortional lateral buckling in continuous composite beams. In: 9th International Conference on Steel Concrete Composite and Hybrid Structures, Leeds, England, July 08-10, 2009. Published in: Steel Concrete Composite and Hybrid Structures pp. 175-182. ISBN 978-981-08-3068-7.

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E. (2008) A hybrid force/displacement seismic design method for steel building frames. In: 14th World Conference of Earthquake Engineering (14WCEE) , Beijing, China, Oct 12-17, 2008. Published in: Proceedings of the 14th World Conference of Earthquake Engineering (14WCEE) , Vol.1-41

Karavasilis, Theodore L., Hale, Emma and Kerawala, Sanaya (2012) Hysteretic model for steel energy absorbers and evaluation of a seismic design strategy using minimal-damage performance objectives. In: 7th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), Santiago, Chile, Jan 09-11, 2012. Published in: STESSA 2012: Proceedings of the 7th International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 119 pp. 847-853. doi:10.1201/b11396-130

Karavasilis, Theodore L., Ricles, James M., Sause, Richard and Chen, Cheng (2010) Use of real-time hybrid simulation to evaluate the performance-based seismic design of steel MRFs with compressed elastomer dampers. In: 2010 Structures Congress, Orlando, FL, U.S.A., May 12-15, 2010. Published in: Proceedings of the 2010 Structures Congress p. 207. doi:10.1061/41130(369)207 ISSN ISBN: 978-0-7844-1130-8.

Karavasilis, Theodore L., Sause, Richard and Ricles, James M. (2010) Design of steel buildings for earthquake conditions using next-generation elastomeric dampers. In: 2010 Structures Congress, Orlando, FL, U.S.A., May 12-15, 2010. Published in: Proceedings of the 2010 Structures Congress p. 129. doi:10.1061/41130(369)129 ISSN ISBN: 978-0-7844-1130-8.

Mallick, Tapas K. and Eames, Philip C. (2007) Optical and thermal performance predictions for a high concentration point focus photovoltaic system. In: Solar World Congress of the International-Solar-Energy-Society, Beijing, 18-21 Sep 2007. Published in: Proceedings of ISES World Congress 2007 : solar energy and human settlement, September 18-21, 2007, Beijing, China pp. 1500-1504. ISBN 9787302161462.

Marshall, Paul, Cain, Rebecca and Payne, Sarah R. (2011) Situated crowdsourcing : a pragmatic approach to encouraging participation in healthcare design. In: 5th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), 2011 , Dublin, 23-26 May 2011. Published in: Pervasive Computing Technologies for Healthcare (PervasiveHealth), 2011 pp. 555-558. ISBN 9781612847672. doi:10.4108/icst.pervasivehealth.2011.246095

Mottram, J. Toby (2009) Design guidance for bolted connections in structures of pultruded shapes: gaps in knowledge. In: Proceedings of the 17th International Conference on Composite Materials (ICCM17), Edinburgh International Conference Centre, Edinburgh, United Kingdom, Jul 27 - 31, 2009. Published in: Proceedings of the 17th International Conference on Composite Materials (ICCM17) (Paper A1:6). pp. 1-10.

Mottram, J. Toby (2009) Determination of pin-bearing strength for the pin-design of bolted connections with standard pultruded profiles. In: Advanced Composites in Construction Conference (ACIC2009)., Edinburgh, U.K. , Sep 1-3, 2009

Mottram, J. Toby (2009) Learning lessons from historical case studies: information sources & higher education. In: Institution of Civil Engineers' Fourth International Conference on Forensic Engineering, London, U.K., Dec 2-4, 2008. Published in: Forensic Engineering: From failure to understanding pp. 595-605. ISSN ISBN: 978-0-7277-3613-0.

Mottram, J. Toby (2008) Stability analysis for pitched portal frames of fibre reinforced polymer. In: Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), Zurich, Switzerland, Jul 22-24, 2008. Published in: Proceedings of the Fourth International Conference on FRP Composites in Civil Engineering (CICE2008) (Chapter 14). ISSN ISBN: 978-3-905594-50-8.

Ricles, James M., Sause, Richard, Karavasilis, Theodore L. and Chen, Cheng (2010) Experimental validation of performance-based seismic design of buildings with dampers using real-time hybrid simulation. In: 7th International Conference on Urban Earthquake Engineering (7CUEE) & 5th International Conference on Earthquake Engineering (5ICEE), Tokyo Institute of Technology, Tokyo, Japan, March 3-5, 2010. Published in: Joint Proceedings of the 7th International Conference on Urban Earthquake Engineering (7CUEE) & 5th International Conference on Earthquake Engineering (5ICEE)

Sinha, Anubhav, Vendra, C. Madhav Rao and Wen, Jennifer X. (2017) Performance evalulation of empirical models for vented lean hydrogen explosions. In: International Conference on Hydrogen Safety, Hamburg, Germany, 11-13 Sep 2017

Tamainot-Telto, Zacharie (2022) Adsorption heat pumps : challenges and future perspectives. In: Heat Powered Cycles Conference (HPC 2021), Bilbao, Spain, 10-13 Apr 2022. Published in: HPC Conference Proceedings 2021 pp. 15-16. ISBN 9780956332974.

Tamainot-Telto, Zacharie (2019) Efficient solar driven air conditioning system for hot climate : case study of Doha. In: 12th International Conference on Solar Energy for Buildings and Industry (EUROSUN2018), Rapperswil, Switzerland, 10-13 Sep 2018. Published in: Proceedings of EUROSUN2018 doi:10.18086/eurosun2018.04.12

Tamainot-Telto, Zacharie (2016) Towards optimum specifications of adsorbent for heat pump and refrigeration applications. In: Heat Powered Cycles Conference 2016, Nottingham , 26-29 Jun 2016. Published in: Heat Powered Cycles Conference 2016 Extended Abstracts (HPC760). pp. 129-130. ISBN 9780956332929 .

Tamainot-Telto, Zacharie and Mayet, Danyal (2016) Thermal conductivity measurement of activated carbon with granular graphite. In: IVth International Symposium on Innovative Materials for Processes in Energy Systems - IMPRES 2016, Taormina, Sicily, Italy, 23-26 Oct 2016. Published in: Chemical Science and Engineering Series 4 p. 105. ISBN 9784944005215.

Uy, Brian, Hicks, Stephen J., Kang, Won-Hee, Thai, Huu-Tai and Aslani, Farhad (2017) The new Australia/New Zealand standard on composite steel-concrete buildings, ASNZS2327. In: 8th International Conference on Composite Construction in Steel and Concrete, Wyoming, 29 Jul-2 Aug 2017. Published in: Proceedings of the Eighth International Conference on Composite Construction in Steel and Concrete pp. 86-97. ISBN 9781564240620.

Wan, Keith, Živanović, Stana and Pavić, Aleksandar (2009) Design spectra for single person loading scenario on footbridges. In: IMAC XXVII Conference & Exposition on Structural Dynamics, Orlando, FL, U.S.A., Feb 9-12, 2009. Published in: Proceedings of the IMAC XXVII

Whittle, J., Williams, M.S., Blakeborough, A. (Anthony) and Karavasilis, Theodore L. (2010) Potential of viscous damper placement techniques for seismic design. In: 14th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, Aug 30 - Sep 3, 2010. Published in: Proceedings of the 14th European Conference on Earthquake Engineering 2010 pp. 40-48.

Wright, Sally (2012) The financialization of construction work. In: 30th International Labour Process Conference (ILPC), Sweden, Stokholm, 27-29 Mar 2012

Wu, Yupeng, Eames, Philip C., Smyth, Mervyn and Mallick, Tapas K. (2007) Optical and thermal analysis of different asymmetric compound parabolic photovoltaic concentrators (ACPPVC) systems for building integration. In: Solar World Congress of the International-Solar-Energy-Society, Beijing, China, 18-21 Sep 2007. Published in: Proceedings of ISES World Congress 2007 : solar energy and human settlement, September 18-21, 2007, Beijing, China pp. 1440-1444. ISBN 9787302161462.

Zafari, Behrouz and Mottram, J. Toby (2011) Pin-bearing strengths for the design of bolted connections with pultruded material. In: Fifth International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing, China, 27-29 Sep 2010. Published in: Advances in FRP Composites in Civil Engineering pp. 99-102. ISBN 9783642174865.

Zafari, Behrouz and Mottram, J. Toby (2011) Strength of fibre reinforced polymer dowel connections for the Startlink house. In: Fifth Conference on Advanced Composites in Construction (ACIC11), University of Warwick, Coventry, U.K., Sep 6-8, 2011. Published in: Advanced Composites in Construction (ACIC) 2011 Conference Proceedings

Zhang, Jincheng, Zhao, Xiaowei and Wei, Xing (2020) Data-driven structural control of monopile wind turbine towers based on machine learning. In: The 21st IFAC World Congress, Berlin, Germany, 12-17 Jul 2020. Published in: IFAC-PapersOnLine, 53 (2). pp. 7466-7471. doi:10.1016/j.ifacol.2020.12.1299 ISSN 2405-8963.

Živanović, Stana, Diaz, I.M. and Pavić, Aleksandar (2009) Influence of walking and standing crowds on structural dynamic properties. In: IMAC XXVII Conference & Exposition on Structural Dynamics, Orlando, FL, U.S.A., Feb 9-12, 2009. Published in: Proceedings of the IMAC XXVII

Živanović, Stana and Pavić, Aleksandar (2008) Vibration exposure in offices: a case study. In: Second American Conference on Human Vibration, Chicago, IL, U.S.A., Jun 4-6, 2008. Published in: Proceedings of the Second American Conference on Human Vibration pp. 104-105.

Živanović, Stana, Pavić, Aleksandar and Brownjohn, J.M.W. (2008) Vibration serviceability assessment of slender structures using VSATs software. In: IMAC-XXVI: Conference & Exposition on Structural Dynamics - Technologies for Civil Structures, Orlando, FL, U.S.A., Feb 4-7, 2008. Published in: Proceedings of the IMAC XXVI

Živanović, Stana, Pavić, Aleksandar and Racic, V. (2012) Towards modelling in-service pedestrian loading of floor structures. In: IMAC XXX Conference and Exhibition on Structural Dynamics, Jacksonville, FL, U.S.A., Jan 30 - Feb 2, 2012. Published in: Topics on the Dynamics of Civil Structures, Vol. 1, Conference Proceedings of the Society for Experimental Mechanics Series, Vol.26 pp. 85-94. doi:10.1007/978-1-4614-2413-0_9 ISSN 2191-5644.

Book

Minghini , Marco and Grinberger, A. Yair and Mooney, Peter and Juhász, Levente and Yeboah, Godwin, eds. (2019) Proceedings of the Academic Track at State of the Map 2019 - Heidelberg (Germany), September 21-23, 2019. September 21-23, 2019, Heidelberg, Germany.

Brisco, G. and Wilson, Robert A. (1993) Employment forecasting in the construction industry. Aldershot : Avebury. ISBN 9781856285643

Lewis, W. J. (Wanda J.) and Kowalinska, Danuta W. (2008) Konstrukcje napiete : ich forma i praca. Opole, Poland: Wydawnictwo Instytut Slaski Sp. z. o.o.. ISBN 9788375110968

Journal Item

UNSPECIFIED (1983) THE ADVANCED STRIP METHOD - A SIMPLE DESIGN TOOL. MAGAZINE OF CONCRETE RESEARCH, 35 (125). pp. 237-239.

UNSPECIFIED (1996) Compression strength of pultruded flat sheet material - Closure. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 8 (1). pp. 60-61.

UNSPECIFIED (2005) Discussion of "Local buckling of fiber reinforced plastic composite structural members with open and closed cross sections" by Laszlo P. Kollar. JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 131 (5). pp. 851-853. doi:10.1061/(ASCE)0733-9445(2003)129:11(1503)

UNSPECIFIED (1993) EUROCODE-4 .1. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 99 (2). p. 241.

UNSPECIFIED (2005) Managing projects as complex social settings. BUILDING RESEARCH AND INFORMATION, 33 (6). pp. 487-493. doi:10.1080/09613210500285015

UNSPECIFIED (2002) Manufacturing testing and numerical analysis of an innovative polymer composite/concrete structural unit - L. Canning, L. Hollaway and A. M. Thorne. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 152 (1). pp. 87-89.

UNSPECIFIED (1985) SIMPLER NODAL FORCES FOR YIELD-LINE ANALYSIS OF REINFORCED-CONCRETE SLABS. MAGAZINE OF CONCRETE RESEARCH, 37 (131). pp. 114-116.

UNSPECIFIED (2000) A review of ventilation and the quality of ventilation air. INDOOR AIR-INTERNATIONAL JOURNAL OF INDOOR AIR QUALITY AND CLIMATE, 10 (3). pp. 193-199.

Report

Alexander, Jennifer (2012) Kirby Hall, Northants : the evidence of the masons' marks. London UK: English Heritage. (Unpublished)

Ascione, Luigi, Caron, Jean - François , Godonou, Patrice, IJselmuijden, K. van, Knippers, Jan, Mottram, J. Toby, Oppe, Mattias, Sorensen, Morten Gantrils , Taby, Jon and Tromp, Liesbeth (2016) Prospect for new guidance in the design of FRP : support to the implementation and further development of the Eurocode. Brussels: Publications Office of the European Union. (Report EUR 27666 EN).

Braun, Matthias, Hicks, Stephen J., Markovic, Zlatko and Way, James (2020) Final draft document from SC4.T5 for Shallow Floor Construction Rules for EN 1994-1-1. Brussels: CEN (European Committee for Standardization).

Braun, Matthias, Hicks, Stephen J., Markovic, Zlatko and Way, James (2020) M/515 Project Team SC4.T5 Background document on the 'Development of rules covering shallow floor construction, and other flooring types using precast concrete elements' for EN 1994-1-1. Brussels: CEN (European Committee for Standardization).

Critoph, Robert E. (2014) Gas driven heat pumps : market potential, support measures and barriers to development of the UK market. London, UK: Department of Energy and Climate Change.

Critoph, Robert E. (2014) State of the art in gas driven heat pumps. London, UK: Department of Energy and Climate Change.

Critoph, Robert E. and Metcalf, Steven J. (2019) UK Summary Report on IEA Heat Pump Technology Collaboration Programme (TCP) Annex 43 : thermally driven heat pumps. London: UK Department for Business, Energy & Industrial Strategy.

Hicks, Stephen J., Braun, Matthias, Markovic, Zlatko and Way, James (2020) Final draft document for Other flooring types using precast concrete elements for implementation into new EN 1994-1-1. Brussels: CEN (European Committee for Standardization).

Schäfer, Markus, Hicks, Stephen J., Banfi, Mike, Kurz, Wolfgang and Martin, Pierre-Olivier (2021) Draft for second generation of prEN 1994-1-1, November 2021. Brussels: European Committee for Standardization.

Schäfer, Markus, Hicks, Stephen J., Banfi, Mike, Kurz, Wolfgang and Martin, Pierre-Olivier (2020) Draft prEN 1994-1-1 : 042020 + comments, Document. Brussels: European Committee for Standardization.

Schäfer, Markus, Hicks, Stephen J., Kurz, Wolfgang, Banfi, Mike and Martin, Pierre-Olivier (2022) European Mandate M515, CEN/TC250/SC4.T6 - Background Documents for prEN 1994-1-1. Brussels: European Committee for Standardization.

Thesis

Abbaker, Abdelfattah Elnur (2006) Behavior of lightweight framing systems for buildings. PhD thesis, University of Warwick.

Allen, Frances M. (2018) Exploring the use of home adaptation and related information for people with dementia living in domestic dwellings. PhD thesis, University of Warwick.

Bae, Jaehoon (2019) Seismic design and assessment of resilient steel frames with visco-plastic dampers. PhD thesis, University of Warwick.

Bastien, Athina Nicolaides (2002) Successful organisational and human practices in the UK construction industry: proposing the CONSTRUCT© framework of good practice : executive summary. EngD thesis, University of Warwick.

Brennan, Robert James (2020) How do new ventures successfully create an ecosystem to capture value from a disruptive technology? DBA thesis, University of Warwick.

Brigham, Martin Patrick (2005) The organisation of technology and the technology of organisation: the Vehicle Mounted Data System and the provision of UK fire services. PhD thesis, University of Warwick.

Gooding, Dominic Edward Maxwell (1994) Improved processes for the production of soil-cement building blocks. PhD thesis, University of Warwick.

Huang, Xiameng (2018) Strategic placement of viscous dampers in steel buildings under strong earthquake ground motions. PhD thesis, University of Warwick.

James, Diane Evelyn Trenchard (2019) ‘An endless variety of forms and proportions’: Indian influence on British gardens and garden buildings, c.1760-c.1865. PhD thesis, University of Warwick.

Khalifa, Abdalla (2015) Processing and characterisation of cementitious materials reinforced with fibres. PhD thesis, University of Warwick.

Kintingu, Simion Hosea (2009) Design of interlocking bricks for enhanced wall construction, flexibility, alignment accuracy and load bearing. PhD thesis, University of Warwick.

Millard, S. G. (1983) Shear transfer in cracked reinforced concrete. PhD thesis, University of Warwick.

Qamar, Furqan (2020) Utilisation of natural fibrous plaster for out-of-plane lateral resistance of masonry walling. PhD thesis, University of Warwick.

Sadeghi, Mahdad (2015) Achieving design quality in building projects : an evolving understanding of critical success factors and stakeholder attributes. PhD thesis, University of Warwick.

Sikic, Ivan (2018) Radiative heat transfer for modelling fire and fire suppression. PhD thesis, University of Warwick.

Spillmann, Thorsten S. (2014) The performance and properties of novel desiccant coated heat exchange surfaces for solar air conditioning. PhD thesis, University of Warwick.

Tellett, John (1984) Pocket-type reinforced brickwork retaining walls. PhD thesis, University of Warwick.

Wei, Xing (2020) Vibration suppression of large and flexible offshore wind turbine. PhD thesis, University of Warwick.

Dataset

Tamainot-Telto, Zacharie, Metcalf, Steven J. and Ng Yande, Neilson (2022) Data for Adsorption solar air conditioning system for Singapore climate. [Dataset]

Thai, Huu-Tai, Thai, Son, Ngo, Tuan, Uy, Brian, Kang, Won-Hee and Hicks, Stephen J. (2020) Concrete-filled steel tubular (CFST) columns database with 3,208 tests. [Dataset]

Book Review

Cooley, Alison (2002) Review of Steinfachwerk in Pompeji : bautechnik und architektur, by Peterse, K. The Classical Review, Vol.52 (No.2). pp. 391-392. ISSN 0009-840X