Journal Article

UNSPECIFIED (1983) APPLICATION OF COMPLEX DEMODULATION TECHNIQUES TO SURFACE-ANALYSIS. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 5 (1). pp. 17-21. ISSN 0141-6359.

UNSPECIFIED (1985) APPLICATIONS OF LINEAR-PROGRAMMING TO ENGINEERING METROLOGY. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 199 (2). pp. 93-100. ISSN 0954-4054.

UNSPECIFIED (1995) ASSESSING MARGINAL IMPACTS OF INVESTMENTS ON THE PERFORMANCE OF ORGANIZATIONAL UNITS. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 39 (1-2). pp. 149-161. ISSN 0925-5273.

UNSPECIFIED (1985) ASSESSMENT OF SURFACE FINISH PROFILES PRODUCED BY MULTI-PROCESS MANUFACTURE. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 199 (4). pp. 263-270. ISSN 0954-4054.

UNSPECIFIED (1994) AUTOS CARRY THE CAN - CONTROLLER AREA NETWORK (CAN) FOR INDUSTRIAL APPLICATIONS. ASSEMBLY AUTOMATION, 14 (1). pp. 17-19. ISSN 0144-5154.

UNSPECIFIED (2003) Application of design of experiments to a spot welding process. ASSEMBLY AUTOMATION, 23 (3). pp. 273-279. doi:10.1108/01445150310486549 ISSN 0144-5154.

UNSPECIFIED (2006) Application of lean visual process management tools. PRODUCTION PLANNING & CONTROL, 17 (1). pp. 77-86. doi:10.1080/09537280500414991 ISSN 0953-7287.

UNSPECIFIED (1991) COMPETITIVE BENCHMARKING - PROGRESS AND FUTURE-DEVELOPMENT. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 4 (2). pp. 98-102. ISSN 0951-5240.

UNSPECIFIED (2004) Capitalizing on thematic initiatives: a framework for process-based change in SMEs. PRODUCTION PLANNING & CONTROL, 15 (1). pp. 2-12. doi:10.1080/09537280310001649363 ISSN 0953-7287.

UNSPECIFIED (2002) Computer based initiatives for implementing and sustaining concurrent engineering. CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, 10 (1). pp. 75-93. doi:10.1106/104538902023731 ISSN 1063-293X.

UNSPECIFIED (2005) Conceptual design and dimensional synthesis of a reconfigurable hybrid robot. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 127 (3). pp. 647-653. doi:10.1115/1.1947208 ISSN 1087-1357.

UNSPECIFIED (2000) Concurrent engineering within British industry. CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS, 8 (1). pp. 2-11. ISSN 1063-293X.

UNSPECIFIED (2002) Creating a low-cost, ultra-clean environment. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 26 (1). pp. 122-127. ISSN 0141-6359.

UNSPECIFIED (1995) DETERMINATION OF SQUEEZE FILM DAMPING IN CAPACITANCE-BASED CANTILEVER FORCE PROBES. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 17 (2). pp. 94-100. ISSN 0141-6359.

UNSPECIFIED (1995) THE DYNAMICS OF CUSTOMER DISSATISFACTION IN SUPPLY CHAINS. PRODUCTION PLANNING & CONTROL, 6 (3). pp. 209-217. ISSN 0953-7287.

UNSPECIFIED (1998) Determination of the temperature of a machined surface. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 120 (2). pp. 259-263. ISSN 1087-1357.

UNSPECIFIED (1996) Development of a knowledge-based system for balancing complex mixed model assembly lines. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 9 (3). pp. 205-216. ISSN 0951-192X.

UNSPECIFIED (1998) Development of electrolytic heat-treatment in aqueous solution. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 84 (1-3). pp. 189-192. ISSN 0924-0136.

UNSPECIFIED (2005) Direct tool steel injection mould inserts through the Arcam EBM free-form fabrication process. ASSEMBLY AUTOMATION, 25 (4). pp. 300-305. doi:10.1108/014451505106264331 ISSN 0144-5154.

UNSPECIFIED (1996) Dynamics and trackability of stylus systems. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 210 (2). pp. 159-165. ISSN 0954-4054.

UNSPECIFIED (1984) THE EFFECT OF FRICTION ON THE STATIC COMPLIANCE OF A CENTER LATHE WORKPIECE SYSTEM. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 22 (2). pp. 323-334. ISSN 0020-7543.

UNSPECIFIED (1990) EFFECTIVENESS FRAMEWORK FOR SUPPLY CHAIN MANAGEMENT. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 3 (4). pp. 196-206. ISSN 0951-5240.

UNSPECIFIED (1996) Efficient characterization of surface topography in cylinder bores. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 19 (2-3). pp. 164-174. ISSN 0141-6359.

UNSPECIFIED (1999) Emulator technology in engineering design. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 213 (3). pp. 305-309. ISSN 0954-4054.

UNSPECIFIED (2002) Extracting geometric attributes directly from scanned data sets for feature recognition. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 15 (1). pp. 50-61. ISSN 0951-192X.

UNSPECIFIED (1994) FUZZY KNOWLEDGE-BASED APPROACH TO TREATING UNCERTAINTY IN INVENTORY CONTROL. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 7 (3). pp. 147-152. ISSN 0951-5240.

UNSPECIFIED (1996) Framework to analyse flexibility and unplanned change in manufacturing systems. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 9 (1). pp. 57-64. ISSN 0951-5240.

UNSPECIFIED (2001) Geometric feature recognition for reverse engineering using neural networks. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 17 (6). pp. 462-470. ISSN 0268-3768.

UNSPECIFIED (2001) Hot platen brazing to produce laminated steel tooling. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 110 (2). pp. 206-210. ISSN 0924-0136.

UNSPECIFIED (2002) How radical was IT-enabled BPR?<Tau Beta > Evidence on financial and business impacts. INTERNATIONAL JOURNAL OF FLEXIBLE MANUFACTURING SYSTEMS, 14 (1). pp. 11-31. ISSN 0920-6299.

UNSPECIFIED (1984) AN INVESTIGATION INTO THE POSSIBILITY OF USING SURFACE PROFILES FOR MACHINE-TOOL SURVEILLANCE. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 22 (3). pp. 453-466. ISSN 0020-7543.

UNSPECIFIED (2000) Improving the manufacturing process quality and capability using experimental design: a case study. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 38 (12). pp. 2607-2618. ISSN 0020-7543.

UNSPECIFIED (2000) Incorporated tool selection system using object technology. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 40 (11). pp. 1547-1555. ISSN 0890-6955.

UNSPECIFIED (2000) Interaction of cellulose with amine oxide solvents. CELLULOSE, 7 (1). pp. 21-33. ISSN 0969-0239.

UNSPECIFIED (1997) Interactive prototyping - A challenge for computer based design. RESEARCH IN ENGINEERING DESIGN-THEORY APPLICATIONS AND CONCURRENT ENGINEERING, 9 (1). pp. 10-19. ISSN 0934-9839.

UNSPECIFIED (2000) Joining techniques for aluminium spaceframes used in automobiles Part I - solid and liquid phase welding. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 99 (1-3). pp. 62-71. ISSN 0924-0136.

UNSPECIFIED (2000) Joining techniques for aluminium spaceframes used in automobiles Part II - adhesive bonding and mechanical fasteners. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 99 (1-3). pp. 72-79. ISSN 0924-0136.

UNSPECIFIED (1994) LINKING MANUFACTURING STRATEGY TO THE DESIGN OF A CUSTOMIZED HYBRID PRODUCTION CONTROL-SYSTEM. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 7 (2). pp. 134-141. ISSN 0951-5240.

UNSPECIFIED (2003) Lean engineering in the aerospace industry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 217 (10). pp. 1409-1420. ISSN 0954-4054.

UNSPECIFIED (1997) Load-dependent behavior in PTFE-glass slideways. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 20 (3). pp. 153-160. ISSN 0141-6359.

UNSPECIFIED (1994) MACHINING OF ADVANCED ENGINEERING MATERIALS USING TRADITIONAL AND LASER TECHNIQUES. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 42 (4). pp. 391-400. ISSN 0924-0136.

UNSPECIFIED (1991) MANAGERIAL INTEGRATION AND CIM - A STRATEGIC RESPONSE. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 4 (2). pp. 103-108. ISSN 0951-5240.

UNSPECIFIED (1995) METHOD FOR SETTING FIDELITY CRITERIA FOR SURFACE-MEASURING INSTRUMENTS. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 17 (4). pp. 274-280. ISSN 0141-6359.

UNSPECIFIED (1997) Manufacturing time compression: Not a technique but a philosophy. PRODUCTION PLANNING & CONTROL, 8 (1). pp. 88-91. ISSN 0953-7287.

UNSPECIFIED (2004) Measures of performance for lean product introduction in the aerospace industry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 218 (10). pp. 1387-1398. ISSN 0954-4054.

UNSPECIFIED (2004) Modified analytic hierarchy process to incorporate uncertainty and managerial aspects. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 42 (18). pp. 3851-3872. doi:10.1080/00207540410001699183 ISSN 0020-7543.

UNSPECIFIED (1995) Multimedia hypermedia in CIM: State-of-the-art review and research implications .1. State-of-the-art review. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 8 (4). pp. 255-260. ISSN 0951-5240.

UNSPECIFIED (1995) Multimedia hypermedia in CIM: State-of-the-art review and research implications .2. Research implications. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 8 (4). pp. 261-268. ISSN 0951-5240.

UNSPECIFIED (1994) A NEW STRATEGY FOR INSPECTING ROUNDNESS FEATURES. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 16 (4). pp. 283-289. ISSN 0141-6359.

UNSPECIFIED (1998) Nd-YAG laser machining of SiC fibre borosilicate glass composites. Part I. Optimisation of laser pulse parameters. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 29 (8). pp. 947-954. ISSN 1359-835X.

UNSPECIFIED (1998) Nd-YAG laser machining of SiC fibre borosilicate glass composites. Part II. The effect of process variables. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 29 (8). pp. 955-964. ISSN 1359-835X.

UNSPECIFIED (1993) A PHILOSOPHY OF LINKING MANUFACTURE TO FUNCTION - AN EXAMPLE IN OPTICS. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 207 (1). pp. 31-42. ISSN 0954-4054.

UNSPECIFIED (1987) RADIAL DEVIATION GAUGE. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 9 (4). pp. 201-209. ISSN 0141-6359.

UNSPECIFIED (1995) REPOSITIONING THE SUPPLIER - AN SME PERSPECTIVE. PRODUCTION PLANNING & CONTROL, 6 (3). pp. 218-226. ISSN 0953-7287.

UNSPECIFIED (2006) Rapid and cost-effective manufacturing of high-integrity aerospace components. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 27 (7-8). pp. 759-773. doi:10.1007/s00170-004-2251-z ISSN 0268-3768.

UNSPECIFIED (1987) SELECTION OF STRUCTURAL-MATERIALS FOR PRECISION DEVICES. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 9 (1). pp. 3-6. ISSN 0141-6359.

UNSPECIFIED (1983) SOME THEORETICAL ASPECTS OF A PRACTICAL MEASUREMENT PROBLEM IN PLATEAU HONING. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 21 (2). pp. 215-221. ISSN 0020-7543.

UNSPECIFIED (1988) STRATEGIC OPTIONS FOR CIM - TECHNOLOGY-CENTERED VERSUS HUMAN-CENTERED SYSTEMS-DESIGN. COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 1 (2). pp. 75-81. ISSN 0951-5240.

UNSPECIFIED (1990) SUBNANOMETER TRANSDUCER CHARACTERIZATION BY X-RAY INTERFEROMETRY. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 12 (3). pp. 165-171. ISSN 0141-6359.

UNSPECIFIED (1996) Short term scheduling and control in the batch process industry using hybrid knowledge based simulation. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 34 (1). pp. 33-50. ISSN 0020-7543.

UNSPECIFIED (2001) Simultaneous optimisation of multiple quality characteristics in manufacturing processes using Taguchi's quality loss function. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 17 (2). pp. 134-138. ISSN 0268-3768.

UNSPECIFIED (1999) Some theoretical aspects of surface peak parameters. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 23 (2). pp. 94-102. ISSN 0141-6359.

UNSPECIFIED (2001) Super-critical carbonation of glass-fibre reinforced cement. Part 1: mechanical testing and chemical analysis. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 32 (12). pp. 1777-1787. ISSN 1359-835X.

UNSPECIFIED (2003) Super-critical carbonation of glass-fibre reinforced cement. Part 2: Microstructural observations. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34 (11). pp. 1105-1112. doi:10.1016/S1359-835X(03)00211-2 ISSN 1359-835X.

UNSPECIFIED (1999) Supply chain modelling using fuzzy sets. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 59 (1-3). pp. 443-453. ISSN 0925-5273.

UNSPECIFIED (1995) TOOL-WEAR PREDICTION USING ARTIFICIAL NEURAL NETWORKS. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 49 (3-4). pp. 255-264. ISSN 0924-0136.

UNSPECIFIED (1999) Tool integration utilising fieldbus technology. ASSEMBLY AUTOMATION, 19 (4). pp. 297-300. ISSN 0144-5154.

UNSPECIFIED (1998) Tool performance and chip control when machining Ti6Al4V and Inconel 901 using high pressure coolant supply. MACHINING SCIENCE AND TECHNOLOGY, 2 (1). pp. 1-12. ISSN 1091-0344.

UNSPECIFIED (2000) Tooling modifications using a Faro portable inspection arm and rapid prototyping. ASSEMBLY AUTOMATION, 20 (4). pp. 330-335. ISSN 0144-5154.

UNSPECIFIED (1987) ULTRA FINE FINISHING OF DIAMOND TOOLS BY ION-BEAMS. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 9 (2). pp. 71-78. ISSN 0141-6359.

UNSPECIFIED (2001) Use of enzymatic digestion and chemical methylation followed by matrix-assisted laser desorption/ionisation (MALDI) mass spectrometry to sequence a 60 kDa commercial fraction of cellulose acetate. CELLULOSE, 8 (1). pp. 81-89. ISSN 0969-0239.

UNSPECIFIED (2001) An approach to the measurement of single-machine flexibility. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 39 (8). pp. 1589-1601. ISSN 0020-7543.

UNSPECIFIED (2002) The automated filling of bonded joints - Part 1 two dimensional joints. ASSEMBLY AUTOMATION, 22 (4). pp. 343-349. doi:10.1108/01445150210446210 ISSN 0144-5154.

UNSPECIFIED (2003) The automated filling of bonded joints - Part 2 three dimensional joints. ASSEMBLY AUTOMATION, 23 (2). pp. 174-180. doi:10.1108/01445150310471446 ISSN 0144-5154.

UNSPECIFIED (1997) A blackboard-based approach to concurrent process design of injection moulding. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 70 (1-3). pp. 258-263. ISSN 0924-0136.

UNSPECIFIED (1998) A computational system for process design of injection moulding: Combining a blackboard-based expert system and a case-based reasoning approach. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 14 (5). pp. 350-357. ISSN 0268-3768.

UNSPECIFIED (1998) A computational system for process design of injection moulding: Combining blackboard-based expert system and case-based reasoning approach. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 14 (4). pp. 239-246. ISSN 0268-3768.

UNSPECIFIED (1999) The current fieldbus standards situation - a European view. ASSEMBLY AUTOMATION, 19 (4). pp. 286-289. ISSN 0144-5154.

UNSPECIFIED (2006) An investigation into the implementation of virtual reality technologies in support of conceptual design. DESIGN STUDIES, 27 (1). pp. 77-97. doi:10.1016/j.destud.2005.06.002 ISSN 0142-694X.

UNSPECIFIED (2001) An object-oriented approach to an agile manufacturing control system design. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 17 (11). pp. 850-859. ISSN 0268-3768.

UNSPECIFIED (1999) A study of the effect of average preset voltage on hardness during electrolytic surface-hardening in aqueous solution. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 91 (1-3). pp. 245-249. ISSN 0924-0136.

UNSPECIFIED (2005) A unified numerical approach for thermal analysis of transversely isotropic fiber-reinforced composites containing inhomogeneous interphase. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 36 (6). pp. 728-738. doi:10.1016/j.compositesa.2004.11.007 ISSN 1359-835X.

Aghadavoudi-Jolfaei, M., Shen, Jialong, Smith, A., Zhou, Lei and Davis, Claire (2019) Non-destructive measurement of microstructure and tensile strength in varying thickness commercial DP steel strip using an EM sensor. Journal of Magnetism and Magnetic Materials, 473 . pp. 477-483. doi:10.1016/j.jmmm.2018.10.099 ISSN 0304-8853.

Agnetis, Alessandro, Chen, Bo, Nicosia, Gaia and Pacifici, Andrea (2019) Price of fairness in two-agent single-machine scheduling problems. European Journal of Operational Research, 276 (1). pp. 79-87. doi:10.1016/j.ejor.2018.12.048 ISSN 0377-2217.

Agyapong-Kodua, Kwabena, Ajaefobi, J. O. and Weston, R. H. (2009) Modelling dynamic value streams in support of process design and evaluation. International Journal of Computer Integrated Manufacturing , Vol.22 (No.5). pp. 411-427. doi:10.1080/09511920802527574 ISSN 0951-192X.

Agyapong-Kodua, Kwabena, Asare, K. B. and Ceglarek, Darek (2014) Digital modelling methodology for effective cost assessment. Procedia CIRP, Volume 17 . pp. 744-749. doi:10.1016/j.procir.2014.02.043 ISSN 2212-8271.

Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Németh, István (2014) Resource selection ontologies in support of a recipe-based factory design methodology. International Journal of Production Research , 52 (21). pp. 6235-6253. doi:10.1080/00207543.2014.918287 ISSN 0020-7543.

Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Némethb, István (2014) Recipe-based integrated semantic product, process, resource (PPR) digital modelling methodology. Procedia CIRP, Volume 17 . pp. 112-117. doi:10.1016/j.procir.2014.03.118 ISSN 2212-8271.

Ahmad, Bilal, Vera, Daniel A. and Harrison, Robert (2016) Engineering methods and tools for cyber–physical automation systems. Proceedings of the IEEE , PP (99). pp. 1-13. doi:10.1109/JPROC.2015.2510665 ISSN 0018-9219.

Al-Nabulsi, Z., Mottram, J. Toby, Gillie, Martin, Kourra, Nadia and Williams, M. A. (2021) Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications. Construction and Building Materials, 274 . 121700. doi:10.1016/j.conbuildmat.2020.121700 ISSN 0950-0618.

Alharthi, Hamzah, Hazra, S. K. , Alghamdi, Abdulrahman, Banabic, Dorel and Dashwood, Richard (2018) Determination of the yield loci of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests). The International Journal of Advanced Manufacturing Technology, 98 (5-8). pp. 1307-1319. doi:10.1007/s00170-018-2339-5 ISSN 0268-3768.

Alkan, Bugra (2019) An experimental investigation on the relationship between perceived assembly complexity and product design complexity. International Journal of Interactive Design and Manufacturing, 13 (3). pp. 1145-1157. doi:10.1007/s12008-019-00556-9 ISSN 1955-2513.

Alkan, Bugra and Harrison, Robert (2019) A virtual engineering based approach to verify structural complexity of component-based automation systems in early design phase. Journal of Manufacturing Systems, 53 . pp. 18-31. doi:10.1016/j.jmsy.2019.09.001 ISSN 0278-6125.

Alkan, Bugra and Kaniappan Chinnathai, Malarvizhi (2021) Performance comparison of recent population-based metaheuristic optimisation algorithms in mechanical design problems of machinery components. Machines, 9 (12). e341. doi:10.3390/machines9120341 ISSN 2075-1702.

Alkan, Bugra, Vera, Daniel A., Ahmad, Bilal and Harrison, Robert (2017) A method to assess assembly complexity of industrial products in early design phase. IEEE Access, 6 . 989 -999. doi:10.1109/ACCESS.2017.2777406 ISSN 2169-3536.

Amel, Hoda, Rongong, Jem, Moztarzadeh, Hadi and Hopkinson, Neil (2016) Effect of section thickness on fatigue performance of laser sintered Nylon 12. Polymer Testing, 53 . pp. 204-210. doi:10.1016/j.polymertesting.2016.05.027 ISSN 0142-9418.

Amer, Mohamed, Curry, Nicholas, Hayat, Qamar, Sharma, Rohit, Janik, Vit, Zhang, Xiang, Nottingham, Jon and Bai, Mingwen (2023) Cracking behavior of Gd2Zr2O7/YSZ multi-layered thermal barrier coatings deposited by suspension plasma spray. Coatings, 13 (1). 107. doi:10.3390/coatings13010107 ISSN 2079-6412.

Armoutis, N., Maropoulos, P. G. (Paul G.), Matthews, Peter C. and Lomas, C. D. W. (2008) Establishing agile supply networks through competence profiling. International Journal of Computer Integrated Manufacturing , Vol.21 (No.2). pp. 166-173. doi:10.1080/09511920701607683 ISSN 0951-192X.

Ashworth, Sam, Fairclough, J. Patrick A., Meredith, James O., Takikawa, Yoshihiro and Kerrigan, Kevin (2022) Effects of tool coating and tool wear on the surface quality and flexural strength of slotted CFRP. Wear, 498-499 . 204340. doi:10.1016/j.wear.2022.204340 ISSN 0043-1648.

Astolfi, Lorenzo, Hutchins, David A., Watson, Richard L., Thomas, Peter J., Ricci, Marco, Nie, Luzhen, Freear, Steven, Cooper, Timothy P., Clare, Adam T. and Laureti, Stefano (2022) Optimised polymer trapped-air lenses for ultrasound focusing in water exploiting Fabry-Pérot resonance. Ultrasonics, 125 . 106781. doi:10.1016/j.ultras.2022.106781 ISSN 0041-624X.

Atay, Atakan, Topuz, Alper, Sarıarslana, Busra, Yıldırım, Ender, Charmet, Jérôme, Couling, Kevin and Cetin, Barbaros (2021) Flow rate controlled pipetting for microfluidics : second generation flexible hydraulic reservoir (FHRv2). Microfluidics and Nanofluidics, 25 . 3. doi:10.1007/s10404-020-02402-x ISSN 1613-4982.

Attallah, Moataz M., Preuss, Michael, Boonchareon, Chatri, Steuwer, Axel, Daniels, John E., Hughes, Darren J., Dungey, Christopher and Baxter, Gavin J. (2012) Microstructural and residual stress development due to inertia friction welding in Ti-6246. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.43 (No.9). pp. 3149-3161. doi:10.1007/s11661-012-1116-6 ISSN 1073-5623.

Babu, Manoj, Franciosa, Pasquale and Ceglarek, Darek (2018) Shape error modelling and analysis by conditional simulations of Gaussian random fields for compliant non-ideal sheet metal parts. Procedia CIRP, 75 . pp. 279-284. doi:10.1016/j.procir.2018.04.023 ISSN 2212-8271.

Babu, Manoj, Franciosa, Pasquale and Ceglarek, Dariusz (2019) Spatio-temporal adaptive sampling for effective coverage measurement planning during quality inspection of free form surfaces using robotic 3D optical scanner. Journal of Manufacturing Systems, 53 . pp. 93-108. doi:10.1016/j.jmsy.2019.08.003 ISSN 0278-6125.

Babu, Nagumothu Kishore, Talari, Mahesh Kumar, Srirangam, Prakash, AlFaify, Abdullah Yahia and Rehman, Ateekh Ur (2022) Characterization of microstructure, weld heat input, and mechanical properties of Mg−Al−Zn alloy GTA weldments. Applied Sciences, 12 (9). e4417. doi:10.3390/app12094417 ISSN 2076-3417.

Balart, MarÍa J., Hao, Xinjiang and Davis, Claire (2022) Automated SEM/EDS analysis for assessment of trace cross-contamination in 316L stainless steel powders. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 53 . pp. 345-358. doi:10.1007/s11661-021-06474-4 ISSN 1073-5623.

Bandi, Bharath, Dinda, Soumitra Kumar, Kar, Jyotirmaya, Roy, Gour Gopal and Srirangam, Prakash (2018) Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints : X-ray tomography study. Vacuum, 158 . pp. 172-179. doi:10.1016/j.vacuum.2018.09.060 ISSN 0042-207X.

Bandi, Bharath, Santillana, Begona, Tiekink, Wouter, Koura, Nadia, Williams, Mark A. and Srirangam, Prakash (2020) 2D automated SEM and 3D X-ray computed tomography study on inclusion analysis of steels. Ironmaking & Steelmaking, 47 (1). pp. 47-50. doi:10.1080/03019233.2019.1652437 ISSN 0301-9233.

Bandi, Bharath, Slater, Carl, Farrugia, Didier and Davis, Claire (2022) Development of desirable fine ferrite grain size and random second phase dual-phase steel microstructures using composition and/or processing modifications. Metals, 12 (7). 1158. doi:10.3390/met12071158 ISSN 2075-4701.

Bandi, Bharath, van Krevel, Joost, Aslam, Numan and Srirangam, Prakash (2019) A model and experimental validation to predict heating rates for overlap between ferrite recrystallization and austenite transformation in dual phase steel manufacture. JOM, 71 (4). pp. 1386-1395. doi:10.1007/s11837-019-03358-2 ISSN 1047-4838.

Barnes, Stuart, Pashby, I. R. and Mok, D. K. (1996) The effect of workpiece temperature on the machinability of an aluminum/SiC MMC. Journal of Manufacturing Science and Engineering, Vol.118 (No.3). pp. 422-427. doi:10.1115/1.2831047 ISSN 1087-1357.

Barnes, Stuart, Timms, N., Bryden, B. G. and Pashby, I. R. (2003) High power diode laser cladding. Journal of Materials Processing Technology, Volume 138 (Number 1-3). pp. 411-416. doi:10.1016/S0924-0136(03)00109-2 ISSN 0924-0136.

Beaumont, Richard Adrian, Masters, Iain, Das, Abhishek, Lucas, Steve, Thanikachalam, Arunn and Williams, D. K. (2021) Methodology for developing a macro finite element model of lithium‐ion pouch cells for predicting mechanical behaviour under multiple loading conditions. Energies, 14 (7). 1921. doi:10.3390/en14071921

Beeravolu, Akhil Reddy, Babu, Nagumothu Kishore, Talari, Mahesh Kumar, Rehman, Ateekh Ur and Srirangam, Prakash (2023) Influence of microstructure and mechanical properties of dissimilar rotary friction welded inconel to stainless steel joints. Materials, 16 (8). 3049. doi:10.3390/ma16083049 ISSN 1996-1944.

Bentley, Cameron Luke, Kang, Minkyung, Bukola, Saheed, Creager, Stephen E. and Unwin, Patrick R. (2022) High-resolution ion-flux imaging of proton transport through graphene|nafion membranes. ACS Nano, 16 (4). pp. 5233-5245. doi:10.1021/acsnano.1c05872 ISSN 1936-086X.

Bing, G. J. A. and Wallbank, J. (2008) The effect of using a sprung stripper in sheet metal cutting. Journal of Materials Processing Technology, Vol.200 (No.1-3). pp. 176-184. doi:10.1016/j.jmatprotec.2007.09.018 ISSN 0924-0136.

Bishop, Elizabeth Grace and Leigh, Simon J. (2020) Using large-scale additive manufacturing (LSAM) as a bridge manufacturing process in response to shortages in PPE during the COVID-19 outbreak. International Journal of Bioprinting, 6 (4). 281. doi:10.18063/ijb.v6i4.281 ISSN 2424-7723.

Bosworth, Derek L. and Wilson, Robert A. (1978) Some evidence on the productivity of qualified manpower in Britain : a note. Bulletin of Economic Research, Volume 30 (Number 1). pp. 45-49. doi:10.1111/j.1467-8586.1978.tb00422.x ISSN 0307-3378.

Bott, J. H., Yin, H., Sridhar, Seetharaman and Auinger, Michael (2016) Influence of gas composition and exposure cycle on the formation of surface and subsurface oxides in iron-aluminium-based alloys at high temperatures. Metallurgical and Materials Transactions B, 47 (4). pp. 2157-2163. doi:10.1007/s11663-016-0671-4 ISSN 1073-5615.

Boyes, Hugh and Watson, Tim (2022) Digital twins : an analysis framework and open issues. Computers in Industry, 143 . 103763. doi:10.1016/j.compind.2022.103763 ISSN 2049-4297.

Branford, Dominic, Miao, Haixing and Datta, Animesh (2018) Fundamental quantum limits of multicarrier optomechanical sensors. Physical Review Letters, 121 (11). 110505. doi:10.1103/PhysRevLett.121.110505 ISSN 0031-9007.

Branke, Jürgen, Nguyen, Su, Pickardt, Christoph W. and Zhang, Mengjie (2016) Automated design of production scheduling heuristics : a review. IEEE Transactions on Evolutionary Computation, 20 (1). pp. 110-124. doi:10.1109/TEVC.2015.2429314 ISSN 1089-778X.

Brežan, Tine, Franciosa, Pasquale, Jezeršek, Matija and Ceglarek, Dariusz (2023) Fusing optical coherence tomography and photodiodes for diagnosis of weld features during remote laser welding of copper-to-aluminum. Journal of Laser Applications, 35 (1). 012018. doi:10.2351/7.0000803 ISSN 1042-346X.

Buchhorn, Moritz, Deeth, Robert J. and Krewald, Vera (2022) Revisiting the fundamental nature of metal‐ligand bonding : an impartial and automated fitting procedure for angular overlap model parameters. Chemistry – A European Journal, 28 (9). e202103775. doi:10.1002/chem.202103775 ISSN 1521-3765.

Bui, Khoa, Wemyss, Alan M., Zhang, Runan, Nguyen, Giao T. M., Vancaeyzeele, Cedric, Vidal, Frederic, Plesse, Cedric and Wan, Chaoying (2022) Tailoring electromechanical properties of natural rubber vitrimers by cross-linkers. Industrial & Engineering Chemistry Research, 61 (25). pp. 8871-8880. doi:10.1021/acs.iecr.2c01229 ISSN 0888-5885.

Cafiso, Diana, Septevani, Athanasia Amanda, Noè, Camilla, Schiller, Tara, Pirri, Candido Fabrizio, Roppolo, Ignazio and Chiappone, Annalisa (2022) 3D printing of fully cellulose-based hydrogels by digital light processing. Sustainable Materials and Technologies, 32 . e00444. doi:10.1016/j.susmat.2022.e00444 ISSN 2214-9937.

Casamayor, Jose L., Su, Daizhong and Wu, You (2023) Eco-redesign of lighting products. LEUKOS, 19 (3). pp. 324-342. doi:10.1080/15502724.2022.2131437 ISSN 1550-2724.

Cawthorn, C. J., Minton, J. J. and Brambley, Edward J. (2016) Asymptotic analysis of cold sandwich rolling. International Journal of Mechanical Sciences, 106 . pp. 184-193. doi:10.1016/j.ijmecsci.2015.12.012 ISSN 0020-7403.

Ceglarek, Dariusz, Franciosa, Pasquale, Shahi, Vahid Jandaghi and Masoumi, Abolfazl (2019) A quality-driven assembly sequence planning and line configuration selection for non-ideal compliant structure assemblies. The International Journal of Advanced Manufacturing Technology, 106 . pp. 15-30. doi:10.1007/s00170-019-04294-w ISSN 0268-3768.

Cela, E., Deineko, Vladimir G. and Woeginger, G. (2023) Recognising permuted Demidenko matrices. Operations Research Letters, 51 (5). pp. 494-500. doi:10.1016/j.orl.2023.07.008 ISSN 0167-6377.

Celottoa, S., Ghadbeigib, H., Pinnab, C., Shollock, Barbara A. and Efthymiadis, Panagiotis (2018) Deformation-induced microstructural banding in TRIP steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (7). pp. 2893-2906. doi:10.1007/s11661-018-4650-z ISSN 1073-5623.

Chan, Pak Hung, Dhadyalla, Gunwant and Donzella, Valentina (2020) A framework to analyze noise factors of automotive perception sensors. IEEE Sensors Letters, 4 (6). pp. 1-4. doi:10.1109/LSENS.2020.2996428 ISSN 1530-437X.

Charmet, Jérôme, Rodrigues, Rui, Yildirim, Ender, Kumar Challa, Pavan, Roberts, Benjamin, Dallmann, Robert and Whulanza, Yudan (2020) Low-cost microfabrication tool box. Micromachines, 11 (2). 135. doi:10.3390/mi11020135 ISSN 2072-666X.

Chaudhuri, Shayantan, Hall, Samuel J., Klein, Benedikt P., Walker, Marc, Logsdail, Andrew J., Macpherson, Julie V. and Maurer, Reinhard J. (2022) Coexistence of carbonyl and ether groups on oxygen-terminated (110)-oriented diamond surfaces. Communications Materials, 3 (1). 6. doi:10.1038/s43246-022-00228-4 ISSN 2662-4443.

Cheeseman, M. J., Swann, P., Hesketh, G. B. and Barnes, Stuart (2005) Adaptive manufacturing scheduling : a flexible and configurable agent-based prototype. Production Planning & Control, Volume 16 (Number 5). pp. 479-487. doi:10.1080/09537280500121810 ISSN 0953-7287.

Chelladurai Asirvatham, M., Collins, Sam and Masters, Iain (2022) Laser wobble welding of steel to Aluminium busbar joints for Li-ion battery packs. Optics & Laser Technology, 151 . 108000. doi:10.1016/j.optlastec.2022.108000 ISSN 0030-3992.

Chen, Bo, Coffman, Ed , Dereniowski, Dariusz and Kubiak, Wiesław (2016) Normal-form preemption sequences for an open problem in scheduling theory. Journal of Scheduling, 19 (6). pp. 701-728. doi:10.1007/s10951-015-0446-9 ISSN 1094-6136.

Chen, Bo, Ye, Yinyu and Zhang, Jiawei (2006) Lot-sizing scheduling with batch setup times. Journal of Scheduling, Vol.9 (No.3). pp. 299-310. doi:10.1007/s10951-006-8265-7 ISSN 1094-6136.

Chen, Zhao, Xiu, Yahui, Zheng, Yuxin, Wang, Xinxin, Wang, Qian, Guo, Danqi and Wan, Yan (2023) A weakly supervised learning pipeline for profiled fibre inspection. IET Image Processing . doi:10.1049/ipr2.12984 ISSN 1751-9659. (In Press)

Cheng, Chuan, Drummond, Ross, Duncan, Stephen R. and Grant, Patrick S. (2022) Extending the energy-power balance of Li-ion batteries using graded electrodes with precise spatial control of local composition. Journal of Power Sources, 542 . 231758. doi:10.1016/j.jpowsour.2022.231758 ISSN 0378-7753.

Cherrington, Ruth, Hughes, Darren J., Senthilarasu, S. and Goodship, Vannessa (2015) Inkjet-printed TiO2 nanoparticles from aqueous solutions for dye-sensitized solar cells (DSSCs). Energy Technology, 3 (8). pp. 866-870. doi:10.1002/ente.201500096 ISSN 2194-4288.

Cherrington, Ruth, Wood, Benjamin M. and Goodship, Vannessa (2016) Digital printing of titanium dioxide for dye sensitized solar cells. Journal of Visualized Experiments (JoVE) (111). e53963. doi:10.3791/53963 ISSN 1940-087X.

Chianese, Giovanni, Franciosa, Pasquale, Sun, Tianzhu, Ceglarek, Dariusz and Patalano, Stanislao (2022) Using photodiodes and supervised machine learning for automatic classification of weld defects in laser welding of thin foils copper-to-steel battery tabs. Journal of Laser Applications, 34 (4). 042040. doi:10.2351/7.0000800 ISSN 1042-346X.

Chokshi, Prasun, Dashwood, R. J. and Hughes, Darren J. (2017) Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping. Computers & Structures, 190 . pp. 162-172. doi:10.1016/j.compstruc.2017.05.015 ISSN 1879-2243.

Choy, K. L. , Lee, W. B., Lau, Henry, Lu, Dawei and Lo, Victor (2004) Design of an intelligent supplier relationship management system for new product development. International Journal of Computer Integrated Manufacturing , Vol. 17 (No. 8). pp. 692-715. doi:10.1080/0951192042000237483 ISSN 0951-192X.

Clark, Eppie E. (2007) Value assessment of workers of ON, AMKOR and HITACHI firms in the Philippines. PICMET 2007 Proceedings . pp. 2656-2671. doi:10.1109/PICMET.2007.4349599

Coles, Stuart R., Jacobs, Daniel K., Meredith, James O., Barker, Guy C., Clark, Andrew J., Kirwan, Kerry, Stanger, Jonathan and Tucker, Nick (2010) A design of experiments (DoE) approach to material properties optimization of electrospun nanofibers. Journal of Applied Polymer Science, Vol.117 (No.4). pp. 2251-2257. doi:10.1002/app.32022 ISSN 0021-8995.

Colledani, Marcello, Bolognese, L., Ceglarek, Darek, Franchini, Fabio, Marine, C. and Mistry, A. (2015) Multi-objective early-stage design of automotive hybrid assembly lines. Procedia CIRP, Volume 28 . pp. 125-130. doi:10.1016/j.procir.2015.04.021 ISSN 2212-8271.

Conceição, Samuel Vieira, da Silva, Gerson Luis Caetano, Lu, Dawei, Nunes, Nilson Tadeu Ramos and Pedrosa, Guilherme Corteletti (2015) A demand classification scheme for spare part inventory model subject to stochastic demand and lead time. Production Planning & Control: The Management of Operations, 26 (16). pp. 1318-1331. doi:10.1080/09537287.2015.1033497 ISSN 0953-7287.

Cook, N. J. (Nicholas John), Smith, Gordon F. and Maggs, Steven J. (2008) A novel multipin positioning system for the generation of high-resolution 3-D profiles by pin-arrays. IEEE Transactions on Automation Science and Engineering, Vol.5 (No.2). pp. 216-222. doi:10.1109/TASE.2007.894725 ISSN 1545-5955.

Cooper, David E., Stanford, Mark, Kibble, Kevin A. and Gibbons, Gregory John (2012) Additive manufacturing for product improvement at Red Bull Technology. Materials & Design, Vol.41 . pp. 226-230. doi:10.1016/j.matdes.2012.05.017 ISSN 02613069.

Crafts, N. F. R. and Wolf, Nikolaus (2014) The location of the UK cotton textiles industry in 1838 : a quantitative analysis. The Journal of Economic History , 74 (4). pp. 1103-1139. doi:10.1017/S0022050714000874 ISSN 0022-0507.

Crawford, Deborah, Casaban, Jose, Haydon, Robert, Giri, Nicola, McNally, Tony and James, Stuart L. (2015) Synthesis by extrusion : continuous, large-scale preparation of MOFs using little or no solvent. Chemical Science, Volume 6 (Number 3). pp. 1645-1649. doi:10.1039/c4sc03217a ISSN 2041-6520.

Crawford, Gregory S. (2012) Endogenous product choice : a progress report. International Journal of Industrial Organization, Vol.30 (No.3). pp. 315-320. doi:10.1016/j.ijindorg.2011.12.006 ISSN 0167-7187.

Cresswell, Rosalie, Dupree, Ray, Brown, Steven P., Pereira, Caroline S., Skaf, Munir S., Sorieul, Mathias, Dupree, Paul and Hill, Stefan (2021) Importance of water in maintaining softwood secondary cell wall nanostructure. Biomacromolecules, 22 (11). pp. 4669-4680. doi:10.1021/acs.biomac.1c00937 ISSN 1525-7797.

Dai, Jinhuo, Nanayakkara, Sepa, Lamb, Thomas, Clark, Andrew J., Guo, Si-Xuan, Zhang, Jie, Patti, Antonio F. and Saito, Kei (2016) Effect of the N-based ligands in copper complexes for depolymerisation of lignin. New Journal of Chemistry, 40 (4). pp. 3511-3519. doi:10.1039/c5nj03152d ISSN 1144-0546.

Das, Abhishek, Barai, Anup, Masters, Iain and Williams, D. K. (2019) Comparison of tab-to-busbar ultrasonic joints for electric vehicle li-ion battery applications. World Electric Vehicle Journal, 10 (3). 55. doi:10.3390/wevj10030055 ISSN 2032-6653.

Das, Abhishek, Beaumont, Richard Adrian, Butterworth, Ian, Masters, Iain and Williams, D. K. (2020) High rate and temperature-dependent tensile characterisation with modelling for gap-bridged remote laser welded (RLW) joint using automotive AA5182 alloy. International Journal of Impact Engineering, 144 . 103672. doi:10.1016/j.ijimpeng.2020.103672 ISSN 0734-743X.

Das, Abhishek, Beaumont, Richard Adrian, Masters, Iain and Haney, Paul (2021) Macro-modelling of laser micro-joints for understanding joint strength in electric vehicle battery interconnects. Materials, 14 (13). 3552. doi:10.3390/ma14133552 ISSN 1996-1944.

Das, Abhishek, Butterworth, Ian, Masters, Iain and Williams, D. K. (2019) Evaluation of key geometrical and mechanical properties for remote laser welded AC-170PX aluminium joints. Journal of Laser Micro/Nanoengineering, 14 (1). doi:10.2961/jlmn.2019.01.0001 ISSN 1880-0688.

Das, Abhishek, Butterworth, Ian, Masters, Iain and Williams, D. K. (2018) Microstructure and mechanical properties of gap-bridged remote laser welded (RLW) automotive grade AA 5182 joints. Materials Characterization, 145 . pp. 697-712. doi:10.1016/j.matchar.2018.09.035

Das, Abhishek, Franciosa, Pasquale, Pesce, Achille and Gerbino, Salvatore (2017) Parametric effect analysis of free-form shape error during sheet metal forming. International Journal of Engineering Science and Technology, 9 (09S). pp. 117-124. ISSN 0975-5462.

Das, Abhishek, Fritz, Robert, Finuf, Mathew and Masters, Iain (2020) Blue laser welding of multi-layered AISI 316L stainless steel micro-foils. Optics & Laser Technology, 132 . doi:10.1016/j.optlastec.2020.106498 ISSN 0030-3992.

Das, Abhishek and Jain, N. K. (2014) Investigations on tool wear and material deposition aspects of TiC coating on aluminum by electro discharge coating (EDC) process. International Journal of Manufacturing Technology and Management, 27 (4-6). pp. 251-262. doi:10.1504/IJMTM.2013.058906 ISSN 1368-2148.

Das, Abhishek, Masters, Iain and Williams, D. K. (2019) Process robustness and strength analysis of multi-layered dissimilar joints using ultrasonic metal welding. The International Journal of Advanced Manufacturing Technology, 101 . pp. 881-900. doi:10.1007/s00170-018-2936-3 ISSN 0268-3768.

Das, Abhishek, Masters, Iain and Williams, D. K. (2021) Understanding novel gap-bridged remote laser welded (RLW) joints for automotive high-rate and temperature applications. International Journal of Mechanical Sciences, 190 . 106043. doi:10.1016/j.ijmecsci.2020.106043 ISSN 0020-7403.

Das, Abhishek and Misra, J. P. (2016) Modelling and parametric optimisation of deposited layer thickness in electric discharge coating process. International Journal of Surface Science and Engineering, 10 (3). pp. 253-271. doi:10.1504/IJSURFSE.2016.076997 ISSN 1749-785X.

Das, Abhishek and Misra, Joy Prakash (2012) Experimental investigation on surface modification of aluminum by electric discharge coating process using TiC/Cu green compact tool-electrode. Machining Science and Technology, 16 (4). pp. 601-623. doi:10.1080/10910344.2012.731951 ISSN 1091-0344.

Das, Abhishek, Rajan, Ashwin T. and Barai, Anup (2019) Modelling and characterisation of ultrasonic joints for Li-ion batteries to evaluate the impact on electrical resistance and temperature raise. Journal of Energy Storage, 22 . pp. 239-248. doi:10.1016/j.est.2019.02.017 ISSN 2352-152X.

Datta, Animesh and Miao, Haixing (2021) Signatures of the quantum nature of gravity in the differential motion of two masses. Quantum Science and Technology, 6 (4). 045014. doi:10.1088/2058-9565/ac1adf ISSN 2058-9565.

Davies, Philip, Parry, Glenn, Alves, Kyle and Ng, Irene C. L. (2022) How additive manufacturing allows products to absorb variety in use : empirical evidence from the defence industry. Production Planning & Control, 33 (2-3). pp. 175-192. doi:10.1080/09537287.2020.1810763 ISSN 0953-7287.

Davis, Timothy Peter (2021) The study of variability in engineering design : an appreciation and a retrospective. Data-Centric Engineering, 2 . doi:10.1017/dce.2021.3 ISSN 2632-6736.

Dhara, Sisir, Basak, S., Panda, S. K., Hazra, S. K. , Shollock, Barbara A. and Dashwood, R. J. (2016) Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory : role of amount and direction of uni-axial pre-strain. Journal of Manufacturing Processes, 24 . pp. 270-282. doi:10.1016/j.jmapro.2016.09.014 ISSN 1526-6125.

Dhara, Sisir and Das, Abhishek (2020) Impact of ultrasonic welding on multi-layered Al–Cu joint for electric vehicle battery applications : a layer-wise microstructural analysis. Materials Science and Engineering: A, 791 . 139795. doi:10.1016/j.msea.2020.139795 ISSN 0921-5093.

Dhara, Sisir, Taylor, Scott, Figiel, Lukasz, Hughes, Darren J. and Hazra, Sumit (2022) Development of a novel testing methodology for in-situ microstructural characterisation during continuous strain path change. Materials Characterization, 183 . 111610. doi:10.1016/j.matchar.2021.111610 ISSN 1044-5803.

Di Maggio, F., Ling, M., Tsang, A., Covington, James A., Saffell, J. and Blackman, C. (2014) Aerosol-assisted CVD synthesis, characterisation and gas-sensing application of gold-functionalised tungsten oxide. Journal of Sensors and Sensor Systems, 3 (2). pp. 325-330. doi:10.5194/jsss-3-325-2014 ISSN 2194-878X.

Dinda, Soumitra Kumar, Basiruddin Sk, Md., Roy, Gour Gopal and Srirangam, Prakash (2016) Microstructure and mechanical properties of electron beam welded dissimilar steel to Fe-Al alloy joints. Materials Science and Engineering: A, 677 . pp. 182-192. doi:10.1016/j.msea.2016.09.050 ISSN 0921-5093.

Dinda, Soumitra Kumar, Kar, Jyotirmaya, Roy, Gour Gopal, Kockelmann, Winfried and Srirangam, Prakash (2020) Texture mapping in electron beam welded dissimilar copper-stainless steel joints by neutron diffraction. Vacuum, 181 . 109668. doi:10.1016/j.vacuum.2020.109668 ISSN 0042-207X.

Dinda, Soumitra Kumar, Warnett, Jason M., Williams, Mark A., Roy, Gour Gopal and Srirangam, Prakash (2016) 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography. Materials & Design, 96 . pp. 224-231. doi:10.1016/j.matdes.2016.02.010 ISSN 0264-1275.

Dodwell, T. J., Fleming, L. R., Buchanan, C., Kyvelou, P., Detommaso, G., Gosling, P.D., Scheichl, R., Kendall, W. S., Gardner, L. (Leroy), Girolami, M.A. and Oates, C. J. (2021) A data-centric approach to generative modelling for 3D-printed steel. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2255). 20210444. doi:10.1098/rspa.2021.0444 ISSN 1364-5021.

Dowsett, M. G., Sabbe, Pieter-Jan, Alves Anjos, Jorge, Schofield, Eleanor J., Walker, David, Thomas, Pam A., York, Stephen J., Brown, Simon, Wermeille, Didier and Adriaens, Mieke (2020) Synchrotron X-ray diffraction investigation of the surface condition of artefacts from King Henry VIII's warship the Mary Rose. Journal of Synchrotron Radiation, 27 (3). doi:10.1107/S1600577520001812 ISSN 0909-0495.

Drummond, Ross, Cheng, Chuan, Grant, Patrick and Duncan, Stephen (2022) Modelling the impedance response of graded LiFePO4 cathodes for Li-ion batteries. Journal of The Electrochemical Society, 169 (1). 010528. doi:10.1149/1945-7111/ac48c6 ISSN 0013-4651.

Duan, Jiaqi, Farrugia, Didier, Davis, Claire, Yan, Zhiming and Li, Zushu (2023) Synergistic effect of residual elements on oxidation rates and oxide/metal interface characteristics in a low-carbon steel oxidized at 1180°C for 3 hours. Ironmaking & Steelmaking . doi:10.1080/03019233.2023.2201545 ISSN 0301-9233. (In Press)

Duan, Lvyin, Debattista, Kurt, Lei, Zhichun and Chalmers, Alan (2020) Subjective and objective evaluation of local dimming algorithms for HDR images. IEEE Access, 8 . pp. 51692-51702. doi:10.1109/ACCESS.2020.2980075 ISSN 2169-3536.

Edmonds, A. M., Newton, Mark E., Martineau, P. M., Twitchen, D. J. and Williams, S. D. (2008) Electron paramagnetic resonance studies of silicon-related defects in diamond. Physical Review B (Condensed Matter and Materials Physics), Vol.77 (No.24). doi:10.1103/PhysRevB.77.245205 ISSN 1098-0121.

Efthymiadis, P., Dashwood, R. J., Shollock, Barbara A., Curry, L., Ghadbeigi, H., Barrow, A. and Robertson, D. (2016) Multiscale characterisation of the mechanical properties of austenitic stainless steel joints. Materials Science and Engineering: A, 676 . pp. 324-335. doi:10.1016/j.msea.2016.08.020 ISSN 0921-5093.

Ellingford, Christopher, Samantaray, Paresh Kumar, Farris, Stefano, McNally, Tony, Tan, Bowen, Sun, Zhaoyang, Huang, Weijie, Ji, Yang and Wan, Chaoying (2022) Reactive extrusion of biodegradable PGA/PBAT blends to enhance flexibility and gas barrier properties. Journal of Applied Polymer Science, 139 (6). e51617. doi:10.1002/app.51617 ISSN 0021-8995.

Ellingford, Christopher, Wemyss, Alan M., Zhang, Runan, Prokes, Ivan, Pickford, Tom, Bowen, Chris, Coveney, Vincent and Wan, Chaoying (2020) Understanding the enhancement and temperature-dependency of the self-healing and electromechanical properties of dielectric elastomers containing mixed pendant polar groups. Journal of Materials Chemistry C, 8 (16). pp. 5426-5436. doi:10.1039/D0TC00509F ISSN 2050-7526.

Enebuse, Ikenna, Foo, Mathias, Ibrahim, Babul K. K. S. M., Ahmed, Hafiz, Supmak, Fhon and Odongo, Steven A. (2021) A comparative review of hand-eye calibration techniques for vision guided robots. IEEE Access, 9 . pp. 113143-113155. doi:10.1109/ACCESS.2021.3104514 ISSN 2169-3536.

Enebuse, Ikenna, Kader Ibrahim, Babul K. S. M., Foo, Mathias, Matharu, Ranveer S and Ahmed, Hafiz (2022) Accuracy evaluation of hand-eye calibration techniques for vision-guided robots. PLoS One, 17 (10). e0273261. doi:10.1371/journal.pone.0273261 ISSN 1932-6203.

Englert, Matthias, Mezlaf, David and Westermann, Matthias (2021) Online makespan scheduling with job migration on uniform machines. Algorithmica, 83 . pp. 3537-3566. doi:10.1007/s00453-021-00852-5 ISSN 0178-4617.

Fakhoury, Yazan, Ellabban, Abdallah, Attia, Usama, Sallam, Ahmed and Elsherbiny, Samer (2022) Three-dimensional printing in ophthalmology and eye care : current applications and future developments. Therapeutic Advances in Ophthalmology, 14 . doi:10.1177/25158414221106682 ISSN 2515-8414.

Fan, X. and Loftus, M. (2007) The influence of cutting force on surface machining quality. International Journal of Production Research , Vol.45 (No.4). pp. 899-911. doi:10.1080/00207540600632208 ISSN 0020-7543.

Fan, X., Masters, Iain, Roy, Rajat and Williams, D. K. (2007) Simulation of distortion induced in assemblies by spot welding. Institution of Mechanical Engineers. Proceedings. Part B: Journal of Engineering Manufacture, Vol.221 (No.8). pp. 1317-1327. doi:10.1243/09544054JEM782 ISSN 0954-4054.

Fanjul-Mosteirín, Noé, Aguirresarobe, Robert, Sadaba, Naroa, Larrañaga, Aitor, Marin, Edurne, Martin, Jaime, Ramos-Gomez, Nicolas, Arno, Maria C., Sardon, Haritz and Dove, Andrew P. (2021) Crystallization-induced gelling as a method to 4D print low-water-content non-isocyanate polyurethane hydrogels. Chemistry of Materials, 33 (18). pp. 7194-7202. doi:10.1021/acs.chemmater.1c00913 ISSN 1520-5002.

Faraji Niri, Mona, Hidalgo, Marc, Apachitei, Geanina, Dogaru, Daniela, Lain, Michael J., Copley, Jack and Marco, James (2024) Data of physical and electrochemical characteristics of calendered NMC622 electrodes and lithium-ion cells at pilot-plant battery manufacturing. Data in Brief, 52 . 109798. doi:10.1016/j.dib.2023.109798 ISSN 2352-3409.

Faraji Niri, Mona, Liu, Kailong, Apachitei, Geanina, Lain, Michael J., Widanage, Widanalage Dhammika and Marco, James (2022) Quantifying key factors for optimised manufacturing of Li-ion battery anode and cathode via artificial intelligence. Energy and AI, 100 . 100129. doi:10.1016/j.egyai.2021.100129

Faraji Niri, Mona, Mafeni Mase, Jimiama and Marco, James (2022) Performance evaluation of convolutional auto encoders for the reconstruction of Li-ion battery electrode microstructure. Energies, 15 (12). pp. 4489-4509. doi:10.3390/en15124489 ISSN 1996-1073.

Fei, Xin, Branke, Jürgen and Gülpinar, Nalân (2019) New sampling strategies when searching for robust solutions. IEEE Transactions on Evolutionary Computation, 23 (2). pp. 273-287. doi:10.1109/TEVC.2018.2849331 ISSN 1089-778X.

Ferrer, Borja Ramis, Ahmad, Bilal, Vera, Daniel A., Lobov, Andrei, Harrison, Robert and Lastra, Jose Luis Martinez (2016) Product, process and resource model coupling for knowledge-driven assembly automation. Automatisierungstechnik, 64 (3). pp. 231-243. doi:10.1515/auto-2015-0073 ISSN 0178-2312.

Fowler, Daniel S., Epiphaniou, Gregory, Higgins, Matthew D. and Maple, Carsten (2023) Aspects of resilience for smart manufacturing systems. Strategic Change, 32 (6). pp. 183-193. doi:10.1002/jsc.2555 ISSN 1099-1697.

Fowler, Daniel S., Mo, Yuen Kwan, Evans, Alex, Dinh-Van, Son, Ahmad, Bilal, Higgins, Matthew D. and Maple, Carsten (2023) A 5G Automated Guided Vehicle SME testbed for resilient future factories. IEEE Open Journal of the Industrial Electronics Society, 4 . pp. 242-258. doi:10.1109/OJIES.2023.3291234 ISSN 2644-1284.

Franciosa, Pasquale, Palit, Arnab, Gerbino, Salvatore and Ceglarek, Darek (2019) A novel hybrid shell element formulation (QUAD+ and TRIA+) : a benchmarking and comparative study. Finite Elements in Analysis and Design, 166 (15). 103319. doi:10.1016/j.finel.2019.103319 ISSN 0168-874X.

Franciosa, Pasquale, Sokolov, Mikhail, Sun, Tianzhu, Chianese, Giovanni and Ceglarek, Darek (2021) Laser welding : high volume manufacturing for E-mobility. The Laser User Magazine, 99 . pp. 24-25. ISSN 1755-514.

Gale, Stuart M. and Lewis, W. J. (Wanda J.) (2016) Patterning of tensile fabric structures with a discrete element model using dynamic relaxation. Computers & Structures, 169 . pp. 112-121. doi:10.1016/j.compstruc.2016.03.005 ISSN 0045-7949.

Gao, Bo, He, Ligang and Jarvis, Stephen A. (2016) Offload decision models and the price of anarchy in mobile cloud application ecosystems. IEEE Access, 3 . pp. 3125-3137. doi:10.1109/ACCESS.2016.2518179 ISSN 2169-3536.

Ge, Yangyang, Zhao, Shuo, Ma, Liang, Yan , Tao, Li, Zushu and Yang , Bin (2019) Inclusions control and refining slag optimization for fork flat steel. Metals, 9 (2). 253. doi:10.3390/met9020253

Geitner, Claudia, Birrell, Stewart A., Krehl, Claudia and Jennings, P. A. (Paul A.) (2018) Haptic foot pedal : influence of shoe type, age, and gender on subjective pulse perception. Human Factors, 60 (4). pp. 496-509. doi:10.1177/0018720818771906 ISSN 0018-7208.

Gibbons, Gregory John, Hansell, R. G., Thacker, G. and Arnett, G. (2009) State of the art in low-cost, rapid composite forming tooling technologies. Journal of Advanced Materials, Vol.41 (No.2). pp. 5-19. ISSN 1070-9789.

Gibbons, Gregory John, Hansell, Robert G., Norwood, A. J. and Dickens, P. M. (2003) Rapid laminated die-cast tooling. Assembly Automation, 23 (4). pp. 372-381. doi:10.1108/01445150310501208 ISSN 0144-5154.

Gibbons, Gregory John and Hansell, Robert George (2008) Thermal-sprayed coatings on aluminium for mould tool protection and upgrade. Journal of Materials Processing Technology, Vol.204 (No.1-3). pp. 184-191. doi:10.1016/j.jmatprotec.2007.11.032 ISSN 0924-0136.

Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. doi:10.1243/09544100JAERO583 ISSN 0954-4100.

Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. doi:10.1243/09544100JAERO582 ISSN 0954-4100.

Gibbons, Gregory John, Williams, Reuben, Purnell, Phil and Farahi, Elham (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. doi:10.1179/174367509X12472364600878 ISSN 1743-6761.

Ginés, Laia, Mandal, Soumen, Morgan, David John, Lewis, Ryan, Davies, Philip R., Borri, Paola, Morley, Gavin and Williams, Oliver A. (2018) Production of metal-free diamond nanoparticles. ACS Omega, 3 (11). pp. 16099-16104. doi:10.1021/acsomega.8b02067 ISSN 2470-1343.

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2020) Coverage path planning with targetted viewpoint sampling for robotic free-from surface inspection. Robotics and Computer-Integrated-Manufacturing, 61 . 101843. doi:10.1016/j.rcim.2019.101843 ISSN 0736-5845.

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2018) End-effector design optimisation and multi-robot motion planning for handling compliant parts. Structural and Multidisciplinary Optimization, 57 (3). pp. 1377-1390. doi:10.1007/s00158-017-1798-x ISSN 1615-147X.

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2019) Quality and productivity driven trajectory optimisation for robotic handling of compliant sheet metal parts in multi-press stamping lines. Robotics and Computer-Integrated Manufacturing, 56 . pp. 264-275. doi:10.1016/j.rcim.2018.10.004 ISSN 0736-5845.

Grant, Nicholas E., Pain, Sophie L., Khorani, Edris, Jefferies, Richard, Wratten, Ailish, McNab, S., Walker, David, Han, Yisong, Beanland, R., Bonilla, R. S. and Murphy, J. D. (2024) Activation of Al2O3 surface passivation of silicon : separating bulk and surface effects. Applied Surface Science, 645 . 158786. doi:10.1016/j.apsusc.2023.158786 ISSN 0169-4332.

(2022) Roadmap on Li-ion battery manufacturing research. JPhys Energy, 4 (4). 042006. doi:10.1088/2515-7655/ac8e30 ISSN 2515-7655.

Griffiths, Elliott R. and Leigh, Simon J. (2022) Hybrid additive manufacture : surface finishing methods for improving conductivity of inkjet printed tracks on non-planar substrates fabricated using fused deposition modeling. Sensors and Actuators A: Physical, 333 . 113235. doi:10.1016/j.sna.2021.113235 ISSN 0924-4247.

Griffiths, Elliott R. and Leigh, Simon J. (2019) Multi-material fused deposition modelling for integration of interdigital dielectric sensors into carbon fibre composite tooling for in process cure monitoring. Sensors and Actuators A: Physical, 296 . pp. 272-277. doi:10.1016/j.sna.2019.07.034 ISSN 0924-4247.

Grimes, Roger, Jackson, M., Moorhouse, B. and Dashwood, R. J. (2008) The manufacture of superplastic magnesium alloy sheet. Materialwissenschaft und Werkstofftechnik, Vol.39 (No.4-5). pp. 340-342. doi:10.1002/mawe.200800302 ISSN 0933-5137.

Grünwald , T, Bestele, C, Bosak, M, Zhao, Jiahui, Newton, Mark E. and Schreck, M (2023) X-ray induced photoconductivity and its correlation with structural and chemical defects in heteroepitaxial diamond. Journal of Applied Physics, 134 (13). 135106. doi:10.1063/5.0167532 ISSN 0021-8979.

Guerra, Valentina, Wan, Chaoying and McNally, Tony (2020) Fused deposition modelling (FDM) of composites of graphene nanoplatelets and polymers for high thermal conductivity : a mini-review. Functional Composite Materials, 1 (1). 3. doi:10.1186/s42252-020-00005-x ISSN 2522-5774.

Guo, Z., Tian, Yanling, Liu, C., Wang, F., Liu, Xianping, Shirinzadeh, B. and Zhang, D. (2015) Design and control methodology of a 3-DOF flexure-based mechanism for micro/nano-positioning. Robotics and Computer-Integrated Manufacturing, 32 . pp. 93-105. doi:10.1016/j.rcim.2014.10.003 ISSN 0736-5845.

Gülçür, Mert, Brown, Elaine, Gough, Tim and Whiteside, Ben (2023) Characterisation of microneedle replication and flow behaviour in ultrasonic micro-injection moulding through design of experiments. Journal of Manufacturing Processes, 102 . pp. 513-527. doi:10.1016/j.jmapro.2023.07.068 ISSN 1526-6125.

Gülçür, Mert, Couling, Kevin, Goodship, Vannessa, Charmet, Jérôme and Gibbons, Gregory John (2023) Rapid tooling : investigation of soft-tooled micro-injection moulding process characteristics using in-line measurements and surface metrology. Rapid Prototyping Journal, 29 (7). pp. 1420-1437. doi:10.1108/RPJ-06-2022-0187 ISSN 1355-2546.

Gülçür, Mert, Wilson, Paul, Donnelly, Michael, Couling, Kevin, Goodship, Vannessa, Charmet, Jérôme, Williams, Mark A. and Gibbons, Gregory John (2023) X-ray computed tomography for predictive quality assessment, 3D visualisation of micro-injection mouldings and soft-tool deformation. Materials & Design, 227 . 111741. doi:10.1016/j.matdes.2023.111741 ISSN 0264-1275.

Hajarnavis, Vivek and Young, K. (Ken) (2008) An investigation into programmable logic controller software design techniques in the automotive industry. Assembly Automation, Volume 28 (Number 1). pp. 43-54. doi:10.1108/01445150810849000 ISSN 0144-5154.

Halder, Kaushik, Montanaro, Umberto, Dixit, Shilp, Dianati, Mehrdad, Mouzakitis, Alexandros and Fallah, Saber (2022) Distributed H∞ controller design and robustness analysis for vehicle platooning under random packet drop. IEEE Transactions on Intelligent Transportation Systems, 23 (5). pp. 4373-4386. doi:10.1109/tits.2020.3044221 ISSN 1524-9050.

Harrison, Robert, Vera, Daniel A. and Ahmad, Bilal (2016) Engineering the smart factory. Chinese Journal of Mechanical Engineering, 29 (6). pp. 1046-1051. doi:10.3901/CJME.2016.0908.109 ISSN 1000-9345.

Harrison, Robert, Vera, Daniel A. and Ahmad, Bilal (2021) A connective framework to support the lifecycle of cyber-physical production systems. Proceedings of the IEEE , 109 (4). pp. 568-581. doi:10.1109/JPROC.2020.3046525 ISSN 0018-9219.

Hartwell, Ian and Marco, James (2016) Management of intellectual property uncertainty in a remanufacturing strategy for automotive energy storage systems. Journal of Remanufacturing, 6 (1). doi:10.1186/s13243-016-0025-z ISSN 2210-464X.

Hasa, Ivana, Passerini, Stefano and Hassoun, Jusef (2017) Toward high energy density cathode materials for sodium-ion batteries : investigating the beneficial effect of aluminum doping on the P2-type structure. Journal of Materials Chemistry A, 5 (9). pp. 4467-4477. doi:10.1039/C6TA08667E ISSN 2050-7488.

Hayat, Qamar, Franciosa, Pasquale, Chianese, Giovanni, Mohan, Anand, Ceglarek, Dariusz, Griffiths, Alexander and Harris, Christopher (2023) Elucidating the effect of circular and tailing laser beam shapes on keyhole necking and porosity formation during laser beam welding of aluminum 1060 using a multiphysics computational fluid dynamics approach. Journal of Laser Applications, 35 (4). 042044 . doi:10.2351/7.0001150 ISSN 1938-1387.

Jaguar Land Rover (Including: Hazra, S. K. , Roya, R., Williams, D. K., Aylmoreb, R. and Hollingdale, D.). (2013) A novel inspection method for determining the cosmetic quality of automotive skin panels. Journal of Materials Processing Technology, 213 (11). pp. 2049-2063. doi:10.1016/j.jmatprotec.2013.04.016 ISSN 0924-0136.

Hernandez-Serrano, Arturo I., Leigh, Simon J. and Pickwell-MacPherson, Emma (2020) In-line evanescent-field-coupled THz bandpass mux/demux fabricated by additive layer manufacturing technology. OSA Continuum, 3 (9). pp. 2407-2414. doi:10.1364/OSAC.399389 ISSN 2578-7519.

Hill, J. F., Morris, C. and Gabriel, R. (2007) An approach to the dynamic detection of outliers in electronics production. International Journal of Production Research , Vol.45 (No.3). pp. 765-778. doi:10.1080/00207540600792283 ISSN 0020-7543.

Htet, Theint Theint, Yan, Zhiming, Khasraw, Darbaz, Hage, Johannes, Meijer, Koen and Li, Zushu (2023) Kinetic study on reduction of FeO in a molten HIsarna slag by various solid carbon sources. Metallurgical and Materials Transactions B, 54 . pp. 163-177. doi:10.1007/s11663-022-02677-1 ISSN 1073-5615.

Htet, Theint Theint, Yan, Zhiming, Kumar, Bharath Sampath, Hage, Johannes, Meijer, Koen and Li, Zushu (2023) Study on hydrogen smelting reduction behaviour in synthetic molten HIsarna slag. Ironmaking & Steelmaking . doi:10.1080/03019233.2023.2204267 ISSN 0301-9233. (In Press)

Hu, Xiao-Bing, Wang, Ming, Ye, Qian, Han, Zhangan and Leeson, Mark S. (2014) Multi-objective new product development by complete Pareto front and ripple-spreading algorithm. Neurocomputing , Volume 142 . pp. 4-15. doi:10.1016/j.neucom.2014.02.058 ISSN 0925-2312.

Huang, Jianglin, Slater, Carl, Mandal, Anup and Blackwell, Paul (2017) A dynamic model for simulation of hot radial forging process. Procedia Engineering, 207 . pp. 478-483. doi:10.1016/j.proeng.2017.10.808 ISSN 1877-7058.

Huang, Tian, Wang, P. F., Mei, J. P., Zhao, X. M. and Chetwynd, D. G. (2007) Time minimum trajectory planning of a 2-DOF translational parallel robot for pick-and-place operations. CIRP Annals - Manufacturing Technology, Volume 56 (Number 1). pp. 365-368. doi:10.1016/j.cirp.2007.05.085 ISSN 0007-8506.

Huang, Tian, Wang, P. F., Zhao, X. M. and Chetwynd, D. G. (2010) Design of a 4-DOF hybrid PKM module for large structural component assembly. CIRP Annals - Manufacturing Technology, 59 (1). pp. 159-162. doi:10.1016/j.cirp.2010.03.098 ISSN 0007-8506.

Huang, Tian and Whitehouse, D. J. (David J.) (1999) Cutting force formulation of taper end-mills using differential geometry. Precision Engineering, Vol.23 (No.3). pp. 196-203. doi:10.1016/S0141-6359(99)00010-0 ISSN 0141-6359.

Huang, Wei and Chen, Bo (2007) Scheduling of batch plants: constraint-based approach and performance investigation. International Journal of Production Economics, Vol.105 (No.2). pp. 425-444. doi:10.1016/j.ijpe.2004.05.028 ISSN 0925-5273.

Huang, Yingping, McMurran, Ross, Amor-Segan, Mark, Dhadyalla, Gunwant, Jones, R. Peter, Bennett, Peter, Mouzakitis, Alexandros and Kieloch, Jan (2010) Development of an automated testing system for vehicle infotainment system. International Journal of Advanced Manufacturing Technology, Vol.51 (No.1-4). pp. 233-246. doi:10.1007/s00170-010-2626-2 ISSN 0268-3768.

Huang, Yingping, McMurran, Ross, Dhadyalla, Gunwant and Jones, P. (Peter), Dr. (2008) Probability based vehicle fault diagnosis : Bayesian network method. Journal of Intelligent Manufacturing, Vol.19 (No.3). pp. 301-311. doi:10.1007/s10845-008-0083-7 ISSN 0956-5515.

Imjai, Thanongsak, Setkit, Monthian, Figueiredo, Fabio P., Garcia, Reyes, Sae-Long, Worathep and Limkatanyu, Suchart (2023) Experimental and numerical investigation on low-strength RC beams strengthened with side or bottom near surface mounted FRP rods. Structure and Infrastructure Engineering, 19 (11). pp. 1600-1615. doi:10.1080/15732479.2022.2045613 ISSN 1573-2479.

Izquierdo, L. E., Hu, S. Jack, Du, Hao, Jin, Ran, Jee, Haeseong and Shi, Jianjun (2009) Robust fixture layout design for a product family assembled in a multistage reconfigurable line. Journal of Manufacturing Science and Engineering, Vol.131 (No.4). Article no. 041008. doi:10.1115/1.3123320 ISSN 1087-1357.

Jabar, Sharhid, Sun, Tianzhu, Franciosa, Pasquale, Kotadia, Hiren R., Ceglarek, Darek, Paolini, Bryan and Faulhaber, Richard (2023) Effect of a ring-shaped laser beam on the weldability of aluminum-to-hilumin for battery tab connectors. Journal of Laser Applications, 35 (4). 042038. doi:10.2351/7.0001156 ISSN 1042-346X.

Jahdi, Saeed, Alatise, Olayiwola M., Ran, Li and Mawby, P. A. (Philip A.) (2015) Analytical modeling of switching energy of silicon carbide Schottky diodes as functions of dIDS/dt and temperature. IEEE Transactions on Power Electronics, 30 (6). pp. 3345-3355. doi:10.1109/TPEL.2014.2333474 ISSN 0885-8993.

Jbair, Mohammad, Ahmad, Bilal, Maple, Carsten and Harrison, Robert (2022) Threat modelling for industrial cyber physical systems in the era of smart manufacturing. Computers in Industry, 137 . 103611. doi:10.1016/j.compind.2022.103611 ISSN 2049-4297.

Jha, Shristy, Mandal, Animesh and Srirangam, Prakash (2019) Optimization of casting process parameters for synthesis of Al-Nb-B master alloy. JOM, 71 . pp. 397-406. doi:10.1007/s11837-018-3125-4 ISSN 1047-4838.

Ji, Mo, Strangwood, Martin and Davis, Claire (2021) Effect of strain-induced precipitation on the recrystallization kinetics in a model alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 52 . pp. 1963-1975. doi:10.1007/s11661-021-06206-8 ISSN 1073-5623.

Jiang, Anyan, Tian, Fengchun, Covington, James A., Jiang, Maogang and Wu, Zhiyuan (2022) Development of gas sensor based on fractal substrate structures. IEEE Transactions on Instrumentation and Measurement, 71 . pp. 1-7. 9506207. doi:10.1109/tim.2022.3175026 ISSN 1557-9662.

Jiang, X., Scott, P. J. and Whitehouse, D. J. (David J.) (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals, Volume 56 (Number 1). pp. 553-556. doi:10.1016/j.cirp.2007.05.132 ISSN 0007-8506.

Johnson, Mark, Roehrich, Jens, Chakkol, Mehmet and Davies, Andrew (2021) Reconciling and reconceptualising servitization research : drawing on modularity, platforms, ecosystems, risk and governance to develop mid-range theory. International Journal of Operations and Production Management, 41 (5). pp. 465-493. doi:10.1108/IJOPM-08-2020-0536 ISSN 0144-3577.

Jones, Jason Blair, Wimpenny, D. I. and Gibbons, Gregory John (2015) Additive manufacturing under pressure. Rapid Prototyping Journal, 21 (1). pp. 89-97. doi:10.1108/RPJ-02-2013-0016 ISSN 1355-2546.

Jones, Jeffrey Alun and Warrington, Les (2010) Generic approach for deriving reliability and maintenance requirements through consideration of in-context customer objectives. Institution of Mechanical Engineers. Proceedings. Part O: Journal of Risk and Reliability, Vol.224 (No.2). pp. 105-112. doi:10.1243/1748006XJRR264 ISSN 1748-006X.

Ju, Yulin, Davis, Claire and Strangwood, Martin (2020) Simulation of coarsening of inter-lath cementite in a Q&T steel during tempering. Materials Science and Technology, 36 (13). pp. 1440-1456. doi:10.1080/02670836.2020.1790097 ISSN 0267-0836.

Ju, Yulin, Goodall, Aimee, Strangwood, Martin and Davis, Claire (2018) Characterisation of precipitation and carbide coarsening in low carbon low alloy Q&T steels during the early stages of tempering. Materials Science and Engineering: A, 738 . pp. 174-189. doi:10.1016/j.msea.2018.09.044 ISSN 0921-5093.

(2023) Research campaign : macroscopic quantum resonators (MAQRO). Quantum Science and Technology, 8 (1). 014006. doi:10.1088/2058-9565/aca3cd ISSN 2058-9565.

Kapoor, Ishwar, Lan, Yongjun, Rijkenberg, Arjan, Li, Zushu and Janik, Vit (2018) Quasi in-situ analysis of geometrically necessary dislocation density in α-fibre and γ-fibre during static recrystallization in cold-rolled low-carbon Ti-V bearing microalloyed steel. Materials Characterization, 145 . pp. 686-696. doi:10.1016/j.matchar.2018.09.032 ISSN 1044-5803.

Kapoor, Ishwar, Lan, Yongjun, Rijkenberg, Arjan, West, Geoffrey D., Li, Zushu and Janik, Vit (2020) Correlative analysis of interaction between recrystallization and precipitation during sub-critical annealing of cold-rolled low-carbon V and Ti-V bearing microalloyed steels. Materials Science and Engineering: A, 785 . 139381. doi:10.1016/j.msea.2020.139381 ISSN 0921-5093.

Kapoor, Ishwar, Narayanan, R Ganesh, Taylor, Scott, Janik, Vit and Dashwood, R. J. (2017) Predicting the warm forming behavior of WE43 and AA5086 alloys. Procedia Engineering, 173 . pp. 897-904. ISSN 1877-7058.

Karimi, Aurash and Auinger, Michael (2020) Thermodynamics of the iron-nitrogen system with vacancies. From first principles to applications. Journal of Alloys and Compounds, 821 . 153343. doi:10.1016/j.jallcom.2019.153343 ISSN 0925-8388.

Kesidou, Effie, Narasimham, Ram, Ozusaglam, Serdal and Wong, Chee Yew (2022) Dynamic openness for network-enabled product and process innovation : a panel-data analysis. International Journal of Operations and Production Management, 42 (3). pp. 257-279. doi:10.1108/IJOPM-06-2021-0380 ISSN 0144-3577.

Khasraw, Darbaz, Htet, Theint Theint, Yang, Xinliang, Degirmenci, Volkan, Hage, Hans, Meijer, Koen and Li, Zushu (2022) Gasification and structural behaviour of different carbon sources and resultant chars from rapid devolatilization for HIsarna alternative ironmaking process. Fuel, 309 . 122210. doi:10.1016/j.fuel.2021.122210 ISSN 0016-2361.

Khurana, Bharat, Spooner, Stephen, Rao, M. B. V., Roy, Gour Gopal and Srirangam, Prakash (2017) In situ observation of calcium oxide treatment of inclusions in molten steel by confocal microscopy. Metallurgical and Materials Transactions B . doi:10.1007/s11663-017-0956-2 ISSN 1073-5615.

Kim, B. C., Innis, P. C., Wallice, G. G., Low, John C. T., Walsh, F. C., Cho, W. J. and Yo, K. H. (2013) Electrically conductive coatings of nickel and polypyrrole/poly(2- methoxyaniline-5-sulfonic acid) on nylon lycra textiles. Progress in Organic Coatings, 76 (10). pp. 1296-1301. doi:10.1016/j.porgcoat.2013.04.004 ISSN 0300-9440.

Kolade, Oluwaseun, Odumuyiwa, Victor, Abolfathi, Soroush, Schröder, Patrick, Wakunuma, Kutoma, Akanmu, Ifeoluwa, Whitehead, Timothy, Tijani, Bosun and Oyinlola, Muyiwa (2022) Technology acceptance and readiness of stakeholders for transitioning to a circular plastic economy in Africa. Technological Forecasting and Social Change, 183 . 121954. doi:10.1016/j.techfore.2022.121954 ISSN 0040-1625.

Koleti, Upender Rao, Rajan, Ashwin T., Tan, Chaou C., Moharana, Sanghamitra, Dinh, Truong Quang and Marco, James (2020) A study on the influence of lithium plating on battery degradation. Energies, 13 (13). 3458. doi:10.3390/en13133458 ISSN 1996-1073.

Koncsag, Claudia I., Eastwood, Daniel C. and Kirwan, Kerry (2011) Recovering low molecular weight extractives from degraded straw by oyster mushroom at the farm scale for high value use. Biomass & Bioenergy, Vol.35 (No.7). pp. 3276-3279. doi:10.1016/j.biombioe.2011.04.051 ISSN 1873-2909.

Kong, Zhenyu, Ceglarek, Darek and Huang, Wenzhen (2008) Multiple fault diagnosis method in multistation assembly processes using orthogonal diagonalization analysis. Journal of Manufacturing Science and Engineering, Vol.130 (No.1). doi:10.1115/1.2783228 ISSN 1087-1357.

Konstantinov, Sergey, Ahmad, Mussawar, Ananthanarayan, Karthik and Harrison, Robert (2017) The cyber-physical e-machine manufacturing system : virtual engineering for complete lifecycle support. Procedia CIRP, 63 . pp. 119-124. ISSN 2212-8271.

Konstantinov, Sergey, Assad, Fadi, Ahmad, Bilal, Vera, Daniel A. and Harrison, Robert (2022) Virtual engineering and commissioning to support the lifecycle of a manufacturing assembly system. Machines, 10 (10). 939. doi:10.3390/machines10100939 ISSN 2075-1702.

Kostryzhev, A. G., Slater, Carl, Marenych, O. O. and Davis, Claire (2016) Effect of solidification rate on microstructure evolution in dual phase microalloyed steel. Scientific Reports, 6 . 35715. doi:10.1038/srep35715 ISSN 2045-2322.

Kotadia, H. R., Franciosa, Pasquale, Jabar, S. and Ceglarek, Darek (2022) Remote laser welding of Zn coated IF steel and 1050 aluminium alloy : processing, microstructure and mechanical properties. Journal of Materials Research and Technology, 19 . pp. 449-465. doi:10.1016/j.jmrt.2022.05.041 ISSN 2238-7854.

Kotadia, H. R., Gibbons, Gregory John, Das, A. and Howes, P. D. (2021) A review of laser powder bed fusion additive manufacturing of aluminium alloys : microstructure and properties. Additive Manufacturing, 46 . 102155. doi:10.1016/j.addma.2021.102155 ISSN 2214-8604 .

Kotadia, Hiren R., Franciosa, Pasquale and Ceglarek, Dariusz (2019) Challenges and opportunities in remote laser welding of steel to aluminium. MATEC Web of Conferences, 269 . 02012. doi:10.1051/matecconf/201926902012 ISSN 2261-236X.

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dibling, Greg, McLoughlin, James, Muirhead-Allwood, Sarah, King, Richard and Williams, M. A. (2018) Computed tomography metrological examination of additive manufactured acetabular hip prosthesis cups. Additive Manufacturing, 22 . pp. 146-152. doi:10.1016/j.addma.2018.04.033 ISSN 2214-8604 .

Kumar, G. S. and Das, Abhishek (2012) Analysis and ergonomic improvement of working postures in cast house work station using JACK modelling. International Journal of Human Factors Modelling and Simulation, 3 (1). pp. 16-31. doi:10.1504/IJHFMS.2012.050060 ISSN 1742-5549.

Kumar, Manoj, Gibbons, Gregory John, Das, Amitabha, Manna, Indranil, Tanner, David and Kotadia, Hiren R. (2021) Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion : microstructural evolution, defects and mechanical properties. Rapid Prototyping Journal, 27 (7). pp. 1388-1397. doi:10.1108/RPJ-10-2020-0241 ISSN 1355-2546.

Kumar, Nikhil, Das, Abhishek, Dale, Tom and Masters, Iain (2021) Laser wobble welding of fluid-based cooling channel joining for battery thermal management. Journal of Manufacturing Processes, 67 . pp. 151-169. doi:10.1016/j.jmapro.2021.04.064 ISSN 1526-6125.

Kumar, Nikhil, Dhara, Sisir, Masters, Iain and Das, Abhishek (2022) Substituting resistance spot welding with flexible laser spot welding to join ultra-thin foil of Inconel 718 to thick 410 steel. Materials, 15 (9). p. 3405. doi:10.3390/ma15093405 ISSN 1996-1944.

Kumar, Nikhil, Masters, Iain and Das, Abhishek (2021) In-depth evaluation of laser-welded similar and dissimilar material tab-to-busbar electrical interconnects for electric vehicle battery pack. Journal of Manufacturing Processes, 70 . pp. 78-96. doi:10.1016/j.jmapro.2021.08.025 ISSN 1526-6125.

Leelatanon, Satjapan, Imjai, Thanongsak, Setkit, Monthian, Garcia, Reyes and Kim, Boksun (2022) Punching shear capacity of recycled aggregate concrete slabs. Buildings, 12 (10). 1584. doi:10.3390/buildings12101584 ISSN 2075-5309.

Lei, Chuan , Zhang, Nannan , Wang, Qudong , Ebrahimi, Mahmoud , Li, Dezhi, Tang, Huaping and Cai, Huisheng (2023) Long-term natural-aging-induced alleviation of attenuation of artificial-aging hardenability in an Al-5 Mg-3Zn-1Cu (wt.%) alloy. Materials Letters, 349 . 134819. doi:10.1016/j.matlet.2023.134819 ISSN 0167-577X.

Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. doi:10.1371/journal.pone.0049365 ISSN 1932-6203.

Leigh, Simon J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2014) Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors. Smart Materials and Structures, 23 (9). 095039. doi:10.1088/0964-1726/23/9/095039 ISSN 0964-1726.

Li, Dezhi (2021) A review of microstructure evolution during ultrasonic additive manufacturing. The International Journal of Advanced Manufacturing Technology, 113 . pp. 1-19. doi:10.1007/s00170-020-06439-8 ISSN 0268-3768.

Li, K. H., Lee, S. F. , Li, C. K. and Lu, Dawei (2005) Evaluation of total throughput time for an electronic production line by simulation and fuzzy pert network. Journal of Advanced Manufacturing Systems, Vol. 4 (No. 2). pp. 195-208. doi:10.1142/S0219686705000679 ISSN 02196867.

Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B. and Xie, Fengwei (2021) 3D printing to innovate biopolymer materials for demanding applications : a review. Materials Today Chemistry, 20 . 100459. doi:10.1016/j.mtchem.2021.100459 ISSN 24685194.

Lian, Zhongxu, Zhou, Jianhui, Ren, Wanfei, Chen, Faze, Xu, Jinkai, Tian, Yanling and Yu, Huadong (2023) Recent progress in bio-inspired macrostructure array materials with special wettability—from surface engineering to functional applications. International Journal of Extreme Manufacturing, 6 (1). 012008. doi:10.1088/2631-7990/ad0471 ISSN 2631-7990.

Linhart, W. M., Rajpalke, M. K., Buckeridge, John, Murgatroyd, P. A. E., Bomphrey, John James, Alaria, J., Catlow, C. R. A., Scanlon, D. O., Ashwin, M. J. and Veal, T. D. (Tim D.) (2016) Band gap reduction in InNxSb1-x alloys : optical absorption, k · P modeling, and density functional theory. Applied Physics Letters, 109 (13). 132104. doi:10.1063/1.4963836 ISSN 0003-6951.

Liu, A. Y., Sun, C., Markevic, V. P., Peaker, A. R., Murphy, John D. and Macdonald, D. (2016) Gettering of interstitial iron in silicon by plasma enhanced chemical vapour deposited silicon nitride films. Journal of Applied Physics, 120 (19). 193103. doi:10.1063/1.4967914 ISSN 0021-8979.

Liu, Haitao, Huang, Tian, Kecskeméthy, Andrés and Chetwynd, D. G. (2014) A generalized approach for computing the transmission index of parallel mechanisms. Mechanism and Machine Theory, 74 . pp. 245-256. doi:10.1016/j.mechmachtheory.2013.12.012 ISSN 0094-114X.

Liu, Jun and Davis, Claire (2021) Tensorial permeability microstructure model considering crystallographic 2 texture and grain size for evaluation of magnetic anisotropy in 3 polycrystalline steels. Philoscopical Magazine, 101 (10). 1224-1244 . doi:10.1080/14786435.2021.1892229 ISSN 1478-6435.

Liu, Jun, Strangwood, M., Davis, Claire and Parker, J. (2015) Non-destructive characterisation of N/Al level in P91 steels using electromagnetic sensors. Materials Science and Technology, 31 (9). pp. 1042-1050. doi:10.1179/1743284714Y.0000000642 ISSN 0267-0836.

Liu, Peng, Ma, Cong, Li, Ying, Wang, Liming, Wei, Linjie, Yan, Yinlei and Xie, Fengwei (2020) Facile preparation of eco-friendly, flexible starch-based materials with ionic conductivity and strain-responsiveness. ACS Sustainable Chemistry & Engineering, 8 . pp. 19117-19128. 51. doi:10.1021/acssuschemeng.0c07473 ISSN 2168-0485.

Liu, Qingyong, Wu, Di, Wang, Qingzhao, Zhang, Peilei, Yan, Hua, Sun, Tianzhu, Zeng, Jie, Yan, Mingliang, Liu, Zhenyu and Li, Ruifeng (2023) Research status of stability in dynamic process of laser-arc hybrid welding based on droplet transfer behavior : a review. Coatings, 13 (1). 205. doi:10.3390/coatings13010205 ISSN 2079-6412.

Liu, X. and Piotter, V. (2007) Mapping micro-mechanical properties of carbon-filled polymer composites by TPM. Precision Engineering, Vol.31 (No.2). pp. 162-168. doi:10.1016/j.precisioneng.2006.05.001 ISSN 0141-6359.

Liu, Yiding, Carnegie, Craig Robert, Ascroft, Helen, Li, Wenhao, Han, Xiao, Guo, Hua and Hughes, Darren J. (2021) Investigation of adhesive joining strategies for the application of a multi-material light rail vehicle. Materials, 14 (22). 6991. doi:10.3390/ma14226991 ISSN 1996-1944.

Liu, Yunpeng, Han , Li, Zhao, Huan and Liu, Xianping (2021) Experimental investigation of the adhesive layer’s impact on the Riv-Bonding process and joint quality. Thin-Walled Structures, 167 . doi:10.1016/j.tws.2021.108255 ISSN 0263-8231.

Liu, Zipeng, Chen, Huan, Zheng, Bo, Xie, Fengwei and Chen, Ling (2020) Understanding the structure and rheological properties of potato starch induced by hot-extrusion 3D printing. Food Hydrocolloids, 105 . 105812. doi:10.1016/j.foodhyd.2020.105812 ISSN 0268-005X.

Long, Shuangyan, Zhong, Lei, Lin, Xuliang, Chang, Xiaogang, Wu, Fuqi, Wu, Ruchun and Xie, Fengwei (2021) Preparation of formyl cellulose and its enhancement effect on the mechanical and barrier properties of polylactic acid films. International Journal of Biological Macromolecules, 172 . pp. 82-92. doi:10.1016/j.ijbiomac.2021.01.029 ISSN 0141-8130.

Loose, Jean-Philippe, Zhou, Qiang, Zhou, Shiyu and Ceglarek, Darek (2010) Integrating GD&T into dimensional variation models for multistage machining processes. International Journal of Production Research , Vol.48 (No.11). pp. 3129-3149. doi:10.1080/00207540802691366 ISSN 0020-7543.

Loose, Jean-Philippe, Zhou, Shiyu and Ceglarek, Darek (2008) Variation source identification in manufacturing processes based on relational measurements of key product characteristics. Journal of Manufacturing Science and Engineering, Vol.130 (No.3). doi:10.1115/1.2844591 ISSN 1087-1357.

Love, James H., Roper, Stephen and Vahter, Priit (2014) Dynamic complementarities in innovation strategies. Research Policy, 43 (10). pp. 1774-1784. doi:10.1016/j.respol.2014.05.005 ISSN 0048-7333.

Lu, Dawei and Antony, Jiju (2002) Optimization of multiple responses using a fuzzy-rule based inference system. International Journal of Production Research , Vol. 40 (No. 7). pp. 1613-1625. doi:10.1080/00207540210122202 ISSN 0020-7543.

Lu, Dawei and Wang, Ming-Shou (2011) Exploring the steel bar logistics value chain in China. Materials Science Forum, Vol.697-698 . pp. 570-575. doi:10.4028/www.scientific.net/MSF.697-698.570 ISSN 0255-5476.

Luo, Chen, Franciosa, Pasquale, Ceglarek, Darek, Ni, Zhonghua and Mo, Zhijie (2021) Early stage variation simulation and visualization of compliant part based on parametric space envelope. IEEE Transactions on Automation Science and Engineering, 18 (3). pp. 1505-1515. doi:10.1109/tase.2020.3035735 ISSN 1558-3783.

Luo, Chen, Nie, Jiaqi, Franciosa, Pasquale and Ceglarek, Dariusz (2023) Modeling variation in multi-station compliant assembly using parametric space envelope. Journal of Manufacturing Science and Engineering, 145 (9). 091005. doi:10.1115/1.4062579 ISSN 1528-8935.

Ma, Lan, Zhai, Yinghao, Wan, Chaoying, Zhang, Zhen, Zhang, Chuanping and Wang, Shifeng (2022) Efficient thermo-oxidative reclamation of green tire rubber and silanized-silica/rubber interface characterization. Polymer Degradation and Stability, 196 . 109827. doi:10.1016/j.polymdegradstab.2022.109827 ISSN 0141-3910.

Ma, Yikai, Zhang, Wenjuan and Branke, Juergen (2023) Multi-objective optimisation of multifaceted maintenance strategies for wind farms. Journal of the Operational Research Society, 74 (5). pp. 1362-1377. doi:10.1080/01605682.2022.2085066 ISSN 1476-9360.

Malas, Asish, Isakov, Dmitry, Couling, Kevin and Gibbons, Gregory John (2019) Fabrication of high permittivity resin composite for vat photopolymerization 3D printing : morphology, thermal, dynamic mechanical and dielectric properties. Materials, 12 (3818). pp. 1-13. doi:10.3390/ma12233818 ISSN 1996-1944.

Maran, Sibi, Masters, Iain and Gibbons, Gregory John (2020) Additive manufacture of 3D auxetic structures by laser powder bed fusion — design influence on manufacturing accuracy and mechanical properties. Applied Sciences, 10 (21). 7738. doi:10.3390/app10217738 ISSN 2076-3417.

Marla, Deepak, Zhang, Yang, Jabbari, Masoud, Sonne, Mads R., Spangenberg, Jon and Hattel, Jesper H. (2016) Improvement in surface characterisitcs of polymers for subsequent electroless plating using liquid assisted laser processing. Physics Procedia, 83 . pp. 211-217. doi:10.1016/j.phpro.2016.08.011 ISSN 1875-3892.

Marsden, Alexander J., Brommer, Peter, Mudd, James J., Dyson, Mark Adam, Cook, Robert M., Asensio, María, Avila, José, Levy, Ana, Sloan, Jeremy, Quigley, David, Bell, Gavin R. and Wilson, Neil R. (2015) Effect of oxygen and nitrogen functionalization on the physical and electronic structure of graphene. Nano Research . pp. 1-16. doi:10.1007/s12274-015-0768-0 ISSN 1998-0124.

Mathew, James, Williams, Mark A. and Srirangam, Prakash (2021) X-ray computed tomography studies on porosity distribution in vacuum induction cast Al-7Si alloys. JOM, 73 (12). pp. 3866-3872. doi:10.1007/s11837-021-04944-z ISSN 1047-4838.

Meredith, James O., Coles, Stuart R., Powe, Richard, Collings, Ed, Cozien-Cazuc, Sophie, Weager, Brendon, Müssig, Jorg and Kirwan, Kerry (2013) On the static and dynamic properties of flax and Cordenka epoxy composites. Composites Science and Technology, Volume 80 . pp. 31-38. doi:10.1016/j.compscitech.2013.03.003 ISSN 0266-3538.

Micheli, Pietro, Perks, Helen and Beverland, Michael B. (2018) Elevating design in the organization. Journal of Product Innovation Management, 35 (4). pp. 629-651. doi:10.1111/jpim.1243 ISSN 0737-6782.

Minton, J. J., Cawthorn, C. J. and Brambley, Edward J. (James) (2016) Asymptotic analysis of asymmetric thin sheet rolling. International Journal of Mechanical Sciences, 113 . pp. 36-48. doi:10.1016/j.ijmecsci.2016.03.024 ISSN 0020-7403.

Minton, Jeremy and Brambley, Edward J. (James) (2017) Meta-analysis of curvature trends in asymmetric rolling. Procedia Engineering, 207 (Supplement C). 1355 - 1360. doi:10.1016/j.proeng.2017.10.896 ISSN 1877-7058.

Mishra, Nishikant, Choudhary, A. K. and Tiwari, M. K. (2008) Modeling the planning and scheduling across the outsourcing supply chain: a Chaos-based fast Tabu-SA approach. International Journal of Production Research , Vol.46 (No.13). pp. 3683-3715. doi:10.1080/00207540601055474 ISSN 0020-7543.

Mohan, Anand, Ceglarek, Darek, Franciosa, Pasquale and Auinger, Michael (2023) Numerical study of beam oscillation and its effect on the solidification parameters and grain morphology in remote laser welding of high strength aluminium alloys. Science and Technology of Welding and Joining, 28 (5). pp. 362-371. doi:10.1080/13621718.2022.2163341 ISSN 1362-1718.

Mohan, Anand, Ceglarek, Dariusz and Auinger, Michael (2022) Numerical modelling of thermal quantities for improving remote laser welding process capability space with consideration to beam oscillation. The International Journal of Advanced Manufacturing Technology, 123 . pp. 761-782. doi:10.1007/s00170-022-10182-7 ISSN 0268-3768.

Mohan, Anand, Franciosa, Pasquale, Ceglarek, Dariusz and Auinger, Michael (2023) Numerical simulation of transport phenomena and its effect on the weld profile and solute distribution during laser welding of dissimilar aluminium alloys with and without beam oscillation. The International Journal of Advanced Manufacturing Technology, 124 (10). pp. 3311-3325. doi:10.1007/s00170-022-10623-3 ISSN 0268-3768.

Moss, Roger W., Shire, G. S. F., Henshall, P., Eames, P. C., Arya, F. and Hyde, T. (2018) Design and fabrication of a hydroformed absorber for an evacuated flat plate solar collector. Applied Thermal Engineering, 138 . pp. 456-464. doi:10.1016/j.applthermaleng.2018.04.033 ISSN 1359-4311.

Mussatayev, Meirbek, Huang, Meifa, Nurtas, Marat and Arynov, Azamat (2021) Improved calibration uncertainty assessment technique in coordinate metrology considering thermal influences. Metrology and Measurement Systems, 28 (4). pp. 609-626. doi:10.24425/mms.2021.137699 ISSN 0860-8229.

Mypati, Omkar, Anwaar, Tariq, Mitra, Desham, Pal, Surjya Kanta and Srirangam, Prakash (2023) Characterization and modelling of Al and Cu busbar during charging and discharging of Li-ion battery for electric vehicles. Applied Thermal Engineering, 218 . 119239. doi:10.1016/j.applthermaleng.2022.119239 ISSN 1359-4311.

Mypati, Omkar, Kumar, Polkampally Pavan, Pal, Surjya Kanta and Srirangam, Prakash (2022) TEM analysis and molecular dynamics simulation of graphene coated Al-Cu micro joints. Carbon Trends, 9 . 100223. doi:10.1016/j.cartre.2022.100223 ISSN 2667-0569.

Mypati, Omkar, Pavan Kumar, Polkampally, Iqbal, Perwej, Pal, Surjya Kanta and Srirangam, Prakash (2021) Molecular dynamics simulation of atomic diffusion in friction stir spot welded Al to Cu joints. Mechanics of Advanced Materials and Structures . pp. 1-7. doi:10.1080/15376494.2021.1972188 ISSN 1537-6532.

Myronov, Maksym, Colston, Gerard B., Davies, Jack and Michael, Laura (2022) A fast approach to measuring the thickness uniformity of a homoepilayer grown on to any type of silicon wafer. Semiconductor Science and Technology, 37 (6). 065003. doi:10.1088/1361-6641/ac5f69 ISSN 1361-6641.

Nasir, Tauqir, Shao, Li, Han, Yisong, Beanland, Richard, Bartlett, Philip N. and Hector, Andrew L. (2022) Mesoporous silica films as hard templates for electrodeposition of nanostructured gold. Nanoscale Advances, 4 (22). pp. 4798-4808. doi:10.1039/d2na00512c ISSN 2516-0230.

Nayak, Soumya Sangita, Iqbal, Md Perwej, Jain, Rahul, Pal, Surjya K. and Srirangam, Prakash (2023) A computationally efficient multiphysics model for friction stir welding with polygonal pin profiles. Journal of Adhesion Science and Technology . pp. 1-33. doi:10.1080/01694243.2023.2241635 ISSN 1568-5616. (In Press)

New, Steve, Hadi, Mohammed, Pickering, Sharon, Robertson, Eleanor, Morgan, Lauren J., Griffin, Damian R., Collins, Gary S., Rivero-Arias, Oliver, Catchpole, Ken and McCulloch, Peter (2016) Lean participative process improvement : outcomes and obstacles in trauma orthopaedics. PLoS One, 11 (4). e0152360. doi:10.1371/journal.pone.0152360 ISSN 1932-6203.

Nie, Luzhen, Hutchins, David A., Astolfi, Lorenzo, Cooper, Timothy P., Clare, Adam T., Adams, Chris, Watson, Richard L., Thomas, Peter J., Cowell, David M. J. , McLaughlan, James R., Laureti, Stefano, Ricci, Marco and Freear, Steven (2022) A metallic additively manufactured metamaterial for enhanced monitoring of acoustic cavitation‐based therapeutic ultrasound. Advanced Engineering Materials, 24 (2). 2100972. doi:10.1002/adem.202100972 ISSN 1438-1656.

Norwood, A. J., Dickens, P. M., Soar, R. C., Harris, R., Gibbons, Gregory John and Hansell, R. (2004) Analysis of cooling channels performance. International Journal of Computer Integrated Manufacturing , 17 (8). pp. 669-678. doi:10.1080/0951192042000237528 ISSN 0951-192X.

Nurika, Irnia, Shabrina, Eka Nur, Azizah, Nurul, Suhartini, Sri, Bugg, Timothy D. H. and Barker, Guy C. (2022) Application of ligninolytic bacteria to the enhancement of lignocellulose breakdown and methane production from oil palm empty fruit bunches (OPEFB). Bioresource Technology Reports, 17 . 100951. doi:10.1016/j.biteb.2022.100951 ISSN 2589-014X.

O'Sullivan, John, Salauddin, Md, Abolfathi, Soroush and Pearson, Jonathan M. (2020) Effectiveness of eco-retrofits in reducing wave overtopping on seawalls. Coastal Engineering Proceedings (36v). doi:10.9753/icce.v36v.structures.13 ISSN 2156-1028.

Oates, Chris J., Kendall, W. S. and Fleming, Liam (2022) A statistical approach to surface metrology for 3D-printed stainless steel. Technometrics, 64 (3). pp. 370-383. doi:10.1080/00401706.2021.2009034 ISSN 0040-1706.

Oliveira, Luis, Burns, Christopher, Luton, Jacob, Iyer, Sumeet and Birrell, Stewart (2020) The influence of system transparency on trust : evaluating interfaces in a highly automated vehicle. Transportation Research Part F: Traffic Psychology and Behaviour, 72 . pp. 280-296. doi:10.1016/j.trf.2020.06.001 ISSN 1369-8478.

Oluwasina, Olugbenga O., Aderibigbe, Abiodun D., Petinrin, Damilola C., Adebisi, Adeyemi S., Oluwasina, Olayinka O. and Wahab, Oluwasegun J. (2022) Potential of anacardic acid for nanosized cellulose preparation under different treatment conditions. Journal of the Nigerian Society of Physical Sciences, 4 (4). 949. doi:10.46481/jnsps.2022.949 ISSN 2714-2817.

Ortiz Gonzalez, Jose Angel, Aliyu, A. M., Alatise, Olayiwola M., Castellazzi, A., Ran, Li and Mawby, P. A. (Philip A.) (2016) Development and characterisation of pressed packaging solutions for high-temperature high-reliability SiC power modules. Microelectronics Reliability, 64 . pp. 434-439. ISSN 0026-2714.

Osorio-Tejada, Jose, Tran, Nam N. and Hessel, Volker (2022) Techno-environmental assessment of small-scale Haber-Bosch and plasma-assisted ammonia supply chains. Science of The Total Environment, 826 . 154162. doi:10.1016/j.scitotenv.2022.154162 ISSN 1879-1026.

Osorio-Tejada, Jose Luis, Llera-Sastresa, Eva, Scarpellini, Sabina and Morales-Pinzón, Tito (2022) Social organizational life cycle assessment of transport services : case studies in Colombia, Spain, and Malaysia. Sustainability, 14 (16). 10060. doi:10.3390/su141610060 ISSN 2071-1050.

Ozkat, Erkan Caner, Franciosa, Pasquale and Ceglarek, Darek (2017) Laser dimpling process parameters selection and optimization using surrogate-driven process capability space. Optics & Laser Technology, 93 . pp. 149-164. doi:10.1016/j.optlastec.2017.02.012 ISSN 0030-3992.

Pamarthi, Venkat Vivek, Sun, Tianzhu, Das, Abhishek and Franciosa, Pasquale (2023) Tailoring the weld microstructure to prevent solidification cracking in remote laser welding of AA6005 aluminium alloys using adjustable ringmode beam. Journal of Materials Research and Technology, 25 . pp. 7154-7168. doi:10.1016/j.jmrt.2023.07.154 ISSN 2238-7854.

Papadimitriou, Ioannis, Efthymiadis, Panagiotis, Kotadia, Hiren, Sohn, I. R. and Sridhar, Seetharaman (2017) Joining TWIP to TWIP and TWIP to aluminium : a comparative study between joining processes, joint properties and mechanical performance. Journal of Manufacturing Processes, 30 . pp. 195-207. doi:10.1016/j.jmapro.2017.09.012 ISSN 1526-6125.

Papanikolaou, Nikos E., Kavallieratos, Nickolas G., Boukouvala, Maria C. and Malesios, Chrisovalantis (2021) (Quasi)-binomial vs. Gaussian models to evaluate thiamethoxam, pirimiphos-methyl, alpha-cypermethrin and deltamethrin on different types of storage bag materials against Ephestia kuehniella Zeller (Lepidoptera: Pyralidae) and Tribolium confusum Jacquelin du Val (Coleoptera: Tenebrionidae). Insects, 12 (2). p. 182. doi:10.3390/insects12020182 ISSN 2075-4450.

Parke, Laura, Hooper, Ian R., Hicken, Robert J., Dancer, Claire E. J., Grant, Patrick S., Youngs, Ian J., Sambles, Roy and Hibbins, Alaistair P. (2013) Heavily loaded ferrite-polymer composites to produce high refractive index materials at centimetre wavelengths. APL Materials, Volume 1 (Number 4). Article number 042108. doi:10.1063/1.4824039

Pashby, I. R., Barnes, Stuart and Bryden, B. G. (2003) Surface hardening of steel using a high power diode laser. Journal of Materials Processing Technology, Volume 139 (Number 1-3). pp. 585-588. doi:10.1016/S0924-0136(03)00509-0 ISSN 0924-0136.

Perelló-March, Jaume R., Burns, Christopher G., Birrell, Stewart A., Woodman, Roger and Elliott, Mark T. (2022) Physiological measures of risk perception in highly automated driving. IEEE Transactions on Intelligent Transportation Systems, 23 (5). pp. 4811-4822. doi:10.1109/TITS.2022.3146793 ISSN 1524-9050.

Perez-Daniel, Karina Ruby, Garcia-Ugalde, Francisco and Sanchez Silva, Victor (2020) Watermarking of HDR images in the spatial domain with HVS-imperceptibility. IEEE Access, 8 . pp. 156801-156817. doi:10.1109/ACCESS.2020.3019517 ISSN 2169-3536.

Petcher, P. A. and Dixon, Steve M. (2015) Weld defect detection using PPM EMAT generated shear horizontal ultrasound. NDT & E International, Volume 74 . pp. 58-65. doi:10.1016/j.ndteint.2015.05.005 ISSN 0963-8695.

Phoomboplab, Tirawat and Ceglarek, Darek (2007) Design synthesis framework for dimensional management in multistage assembly system. CIRP Annals - Manufacturing Technology, Vol.56 (No.1). pp. 153-158. doi:10.1016/j.cirp.2007.05.037 ISSN 0007-8506.

Pickardt, Christoph W. and Branke, Jürgen (2012) Setup-oriented dispatching rules – a survey. International Journal of Production Research , Vol.50 (No.20). pp. 5823-5842. doi:10.1080/00207543.2011.629634 ISSN 0020-7543.

Pietukhov, Rostyslav, Ahtamad, Mujthaba, Faraji Niri, Mona and El-said, Tarek (2023) A hybrid forecasting model with logistic regression and neural networks for improving key performance indicators in supply chains. Supply Chain Analytics, 4 . 100041. doi:10.1016/j.sca.2023.100041

Plata, Gorka, Lozares, Jokin, Sánchez, Andrea, Hurtado, Iñaki and Slater, Carl (2020) Preliminary study on the capability of the novel near solidus forming (NSF) technology to manufacture complex steel components. Materials, 13 (20). e4682. doi:10.3390/ma13204682 ISSN 1996-1944.

Praig, Vera G., Stoger-Pollach, Michael, Schintlmeister, Arno, Auinger, Michael and Danninger, Herbert (2021) High-resolution topochemical analysis and thermochemical simulations of oxides and nitrides at grain boundaries and within the grains of a low alloy Mn-Cr hot-rolled steel sheet. Journal of Alloys and Compounds, 876 . 160069. doi:10.1016/j.jallcom.2021.160069 ISSN 09258388.

Prakash, Prakash, Izquierdo, L. E. and Ceglarek, Darek (2009) Functional process adjustments to reduce No-Fault-Found product failures in service caused by in-tolerance faults. CIRP Annals - Manufacturing Technology, Vol.58 (No.1). pp. 37-40. doi:10.1016/j.cirp.2009.03.075 ISSN 0007-8506.

(2022) Achieving ultra‐high rate planar and dendrite‐free zinc electroplating for aqueous zinc battery anodes. Advanced Materials, 34 (28). 2202552. doi:10.1002/adma.202202552 ISSN 0935-9648.

Qian, Connie, Norman, Danielle, Williams, M. A. and Kendall, Kenneth N. (2022) Experimental and numerical characterisation of fibre orientation distributions in compression moulded carbon fibre SMC. Plastics, Rubber and Composites: Macromolecular Engineering, 51 (8). pp. 436-444. doi:10.1080/14658011.2022.2108984 ISSN 1465-8011.

Rahman, A. T. M. Anishur, Frangeskou, Angelo, Barker, P. F. and Morley, Gavin (2018) An analytical model for the detection of levitated nanoparticles in optomechanics. Review of Scientific Instruments, 89 (2). 023109. doi:10.1063/1.5008396 ISSN 0034-6748.

Rahnama, Alireza, Dashwood, R. J. and Sridhar, Seetharaman (2017) A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordred γ and α phases in low density steel. Computational Materials Science, 126 . pp. 152-159. ISSN 0927-0256.

Ramakrishnan, Ramkumar and Mao, Ken (2017) Minimization of shrinkage in injection molding process of acetal polymer gear using Taguchi DOE optimization and ANOVA method. International Journal of Mechanical and Industrial Technology, 4 (2). pp. 72-79. ISSN 2348-7593 .

Ramis Ferrer, Borja, Mohammed, Wael M., Ahmad, Mussawar, Iarovyi, Sergii, Zhang, Jiayi, Harrison, Robert and Martinez Lastra, Jose Luis (2021) Comparing ontologies and databases : a critical review of lifecycle engineering models in manufacturing. Knowledge and Information Systems, 63 (6). pp. 1271-1304. doi:10.1007/s10115-021-01558-4 ISSN 0219-1377.

Ratner, Alon, Wood, Michael, Chowanietz, Maximilian, Kumar, Nikhil, Patel, Rashik, Hadlum, Paul, Das, Abhishek and Masters, Iain (2022) Laser doppler vibrometry for evaluating the quality of welds in lithium-ion supercells. Energies, 15 (12). p. 4379. doi:10.3390/en15124379 ISSN 1996-1073.

Renz, A. B., Li, F., Vavasour, Oliver J., Gammon, P. M., Dai, T., Baker, G. W. C., Via, F. La, Zielinski, M. (Marcin), Zhang, L., Grant, Nicholas E., Murphy, John D., Mawby, P. A. (Philip A.), Jennings, M. R. (Michael R.) and Shah, V. A. (2021) Initial investigations into the MOS interface of freestanding 3C-SiC layers for device applications. Semiconductor Science and Technology, 36 (5). 055006. doi:10.1088/1361-6641/abefa1 ISSN 1361-6641.

Riello, Giorgio (2007) Nature, production and regulation in eighteenth-century Britain and France : the case of the leather industry. Historical Research, Vol.81 (No.211). pp. 78-99. doi:10.1111/j.1468-2281.2007.00413.x ISSN 0950-3471.

Rodriguez, Bruno J., Navabpour, Parnia, Proprentner, Daniela, Walker, Marc, Sun, Hailin and Schiller, Tara L. (2021) An alternative approach to the analysis of Si-doped DLC coatings deposited with different bias voltage. Emergent Materials, 4 . 1595-1604 . doi:10.1007/s42247-021-00263-w ISSN 2522-574X.

Rola, Anna, Potok, Paulina, Wieczorek, Robert, Mos, Magdalena, Gumienna-Kontecka, Elżbieta and Potocki, Sławomir (2022) Coordination properties of the zinc domains of BigR4 and SmtB proteins in nickel systems─designation of key donors. Inorganic Chemistry, 61 (25). pp. 9454-9468. doi:10.1021/acs.inorgchem.2c00319 ISSN 0020-1669.

Roman Ramirez, Luis, Apachitei, Geanina, Faraji Niri, Mona, Lain, Michael J., Widanage, Widanalage Dhammika and Marco, James (2022) Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium‑ion batteries. International Journal of Energy and Environmental Engineering, 13 . pp. 943-953. doi:10.1007/s40095-022-00481-w ISSN 2008-9163.

Roman Ramirez, Luis, Apachitei, Geanina, Faraji Niri, Mona, Lain, Mike J., Widanage, Widanalage Dhammika and Marco, James (2021) Understanding the effect of coating-drying operating variables on electrode physical and electrochemical properties of lithium-ion batteries. Journal of Power Sources, 516 . 230689. doi:10.1016/j.jpowsour.2021.230689 ISSN 0378-7753.

Roy, Rajat, Evans , Rob, Low, M. J. and Williams, David (2011) Addressing the impact of high levels of product variety on complexity in design and manufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (10). pp. 1939-1950. doi:10.1177/0954405411407 ISSN 0954-4054.

Sahu, Suryakanta, Mypati, Omkar, Pal, Surjya K., Shome, Mahadev and Srirangam, Prakash (2021) Effect of weld parameters on joint quality in friction stir welding of Mg 2 alloy to DP steel dissimilar materials. CIRP Journal of Manufacturing Science and Technology, 35 . pp. 502-516. doi:10.1016/j.cirpj.2021.06.012 ISSN 1755-5817.

Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John (2016) Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications. Journal of Applied Polymer Science, 133 (25). 43572. doi:10.1002/app.43572 ISSN 0021-8995.

Saldi, Z. S., Kidess, A., Kenjereš, S., Zhao, Changying, Richardson, I. M. and Kleijn, C. R. (2013) Effect of enhanced heat and mass transport and flow reversal during cool down on weld pool shapes in laser spot welding of steel. International Journal of Heat and Mass Transfer, 66 . pp. 879-888. doi:10.1016/j.ijheatmasstransfer.2013.07.085 ISSN 0017-9310.

Sankaranarayanan, R., Jesudoss Hynes, N. Rajesh, Li, Dezhi, Chrysanthou, A. and Amancio-Filho, Sergio T. (2021) Review of research on friction riveting of polymer/metal light weight multi-material structures. Transactions of the Indian Institute of Metals, 74 . pp. 2541-2553. doi:10.1007/s12666-021-02356-w ISSN 0972-2815.

Santos-Vijande, María Leticia, López-Sánchez, José Ángel, Loredo, Enrique, Rudd, John M. and López-Mielgo, Nuria (2022) Role of innovation and architectural marketing capabilities in channelling entrepreneurship into performance. Journal of Innovation & Knowledge, 7 (2). 100174. doi:10.1016/j.jik.2022.100174 ISSN 2444-569X.

Satti, Teysseer, Young, Ken and Grover, Samuel (2009) Detecting catastrophic failure events in large-scale milling machines. International Journal of Machine Tools and Manufacture, Vol.49 (No.14). pp. 1104-1113. doi:10.1016/j.ijmachtools.2009.07.012 ISSN 0890-6955.

Schröder, Patrick, Oyinlola, Muyiwa, Barrie, Jack, Bonmwa, Fwangkwal and Abolfathi, Soroush (2023) Making policy work for Africa’s circular plastics economy. Resources, Conservation and Recycling, 190 . 106868. doi:10.1016/j.resconrec.2023.106868 ISSN 0921-3449.

SenGupta, A., Santillana, B., Sridhar, S. and Auinger, Michael (2019) Dendrite growth direction measurements : understanding the solute advancement in continuous casting of steel. IOP Conference Series: Materials Science and Engineering, 529 (1). 012065. doi:10.1088/1757-899X/529/1/012065 ISSN 1757-899X.

Seyfpour, M., Ghanei, S., Mazinani, M., Kashefi, M. and Davis, Claire (2017) Nondestructive examination of recovery stage during annealing of a cold-rolled low-carbon steel using eddy current testing technique. Nondestructive Testing and Evaluation, 33 (2). pp. 165-174. doi:10.1080/10589759.2017.1409746 ISSN 1058-9759.

Shegiwal, Ataulla, Wemyss, Alan M., Schellekens, Mike A. J., de Bont, Jens, Town, James, Liarou, Evelina, Patias, Georgios, Atkins, Christophe J. and Haddleton, David M. (2019) Exploiting catalytic chain transfer polymerization for the synthesis of carboxylated latexes via sulfur‐free RAFT. Journal of Polymer Science Part A: Polymer Chemistry . doi:10.1002/pola.29302 ISSN 0887-624X.

Simmons, Jonathan A., Sprittles, James E. and Shikhmurzaeva, Yulii D. (2015) The formation of a bubble from a submerged orifice. European Journal of Mechanics B/Fluids, 53 . pp. 24-36. doi:10.1016/j.euromechflu.2015.01.003 ISSN 0997-7546.

Singh, A., Cooper, David E., Blundell, N., Pratihar, D. K. and Gibbons, Gregory John (2014) Modelling of weld-bead geometry and hardness profile in laser welding of plain carbon steel using neural networks and genetic algorithms. International Journal of Computer Integrated Manufacturing , Volume 27 (Number 7). doi:10.1080/0951192X.2013.834469 ISSN 0951-192X.

Singh, Anubhav, Reynolds, Neil, Carnegie, Craig Robert , Micallef, Christopher, Keating, Elspeth, Winnett, James, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2019) A novel route for volume manufacturing of hollow braided composite beam structures. Advanced Manufacturing: Polymer & Composites Science, 5 (4). 224-229 . doi:10.1080/20550340.2019.1680514 ISSN 2055-0340.

Singh, Anubhav, Reynolds, Neil, Keating, Elspeth, Barnett, Alastair E, Barbour, Steve K and Hughes, Darren J. (2021) Three-point flexural performance of tailor-braided thermoplastic composite beam structures. Composite Structures, 260 . 113521. doi:10.1016/j.compstruct.2020.113521 ISSN 0263-8223.

Singh, Aru Ranjan, Bashford-Rogers, Thomas, Hazra, Sumit and Debattista, Kurt (2023) Generating synthetic training images to detect split defects in stamped components. IEEE Transactions on Industrial Informatics . doi:10.1109/TII.2023.3329711 ISSN 1551-3203. (In Press)

Singh, Aru Ranjan, Bashford-Rogers, Thomas, Marnerides, Demetris, Debattista, Kurt and Hazra, Sumit (2023) HDR image-based deep learning approach for automatic detection of split defects on sheet metal stamping parts. The International Journal of Advanced Manufacturing Technology, 125 . pp. 2393-2408. doi:10.1007/s00170-022-10763-6 ISSN 0268-3768.

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Darek (2021) Object shape error response using Bayesian 3D convolutional neural networks for assembly systems with compliant parts. IEEE Transactions on Industrial Informatics , 17 (10). pp. 6676-6686. doi:10.1109/TII.2020.3043226 ISSN 1551-3203.

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Dariusz (2021) Building a scalable and interpretable bayesian deep learning framework for quality control of free form surfaces. IEEE Access, 9 . pp. 50188-50208. doi:10.1109/ACCESS.2021.3068867 ISSN 2169-3536.

Slater, Carl and Davis, Claire (2020) Near net shape casting : is it possible to cast too thin? Metallurgical and Materials Transactions B . doi:10.1007/s11663-020-01964-z ISSN 1073-5615.

Slater, Carl and Davis, Claire (2016) Using confocal scanning laser microscopy to characterise as-cast microstructures using cooling rates representative of thin slab direct cast steels. LA Metallurgia Italiana (2). pp. 23-30. ISSN 0026-0843.

Slater, Carl, Hechu, Kateryna, Davis, Claire and Sridhar, Seetharaman (2019) Characterisation of the solidification of a molten steel surface using infrared thermography. Metals, 9 (2). 126. doi:10.3390/met9020126 ISSN 2075-4701.

Slater, Carl, Hechu, Kateryna and Sridhar, Seetharaman (2017) Characterisation of solidification using combined confocal scanning laser microscopy with infrared thermography. Materials Characterization, 126 . pp. 144-148. doi:10.1016/j.matchar.2017.02.025 ISSN 1044-5803.

Slater, Carl, Mandal, Abhijit and Davis, Claire (2019) The influence of segregation of Mn on the recrystallization behavior of C-Mn steels. Metallurgical and Materials Transactions B, 50 . pp. 1627-1636. doi:10.1007/s11663-019-01603-2 ISSN 1073-5615.

Slater, Carl, Plata, Gorka, Sánchez, Andrea, Lozares, Jokin and Hurtado, Iñaki (2020) A novel forming technique to coforge bimetal components into complex geometries. Manufacturing Letters, 26 . pp. 21-24. doi:10.1016/j.mfglet.2020.09.006 ISSN 2213-8463.

Slater, Carl, Spooner, Stephen, Davis, Claire and Sridhar, Seetharaman (2016) Observation of the reversible stabilisation of liquid phase iron during nitriding. Materials Letters, 173 . pp. 98-101. doi:10.1016/j.matlet.2016.03.045 ISSN 0167-577X.

Small, N. R., Williams, D. K., Roy, Rajat and Hazra, S. K. (2020) Accounting for the effect of heterogeneous plastic deformation on the formability of aluminium and steel sheets. International Journal of Advanced Manufacturing Technology, 109 . pp. 397-410. doi:10.1007/s00170-020-05372-0 ISSN 0268-3768.

Sokolov, Mikhail, Franciosa, Pasquale, Sun, Tianzhu and Ceglarek, Dariusz (2020) Applying optical coherence tomography for weld depth monitoring in remote laser welding of automotive battery tab connectors. Journal of Laser Applications, 33 (1). 012028. doi:10.2351/7.0000336 ISSN 1042-346X.

Sommervill, Roberto, Zhu, Pengcheng, Ali Rajaeifar, Mohammad, Heidrich, Oliver, Goodship, Vannessa and Kendrick, Emma (2021) A qualitative assessment of lithium ion battery recycling processes. Resources, Conservation and Recycling, 165 . 105219. doi:10.1016/j.resconrec.2020.105219 ISSN 0921-3449.

Spooner, Stephen, Davis, Claire and Li, Zushu (2020) Modelling the cumulative effect of scrap usage within a circular UK steel industry - residual element aggregation. Ironmaking & Steelmaking, 47 (10). pp. 1100-1113. doi:10.1080/03019233.2020.1805276 ISSN 0301-9233.

Spooner, Stephen, Li, Zushu and Sridhar, Seetharaman (2020) Hidden phenomena during transient reaction trajectories in liquid metals processing. Metallurgical and Materials Transactions B, 51 . pp. 1301-1314. doi:10.1007/s11663-020-01880-2 ISSN 1073-5615.

Spooner, Stephen, Rahnama, Alireza, Warnett, Jason M., Williams, M. A., Li, Zushu and Sridhar, Seetharaman (2017) Quantifying the pathway and predicting spontaneous emulsification during material exchange in a two phase liquid system. Scientific Reports, 7 (1). 14384. doi:10.1038/s41598-017-14638-9 ISSN 2045-2322.

Stadler, Christian (2011) Process innovation and integration in process-oriented settings : the case of the oil industry. Journal of Product Innovation Management, 28 (s1). pp. 44-62. doi:10.1111/j.1540-5885.2011.00860.x ISSN 0737-6782.

Stein, Stefan, Leng, Chenlei, Thornton, Steven and Randrianandrasana, Michel (2021) A guided analytics tool for feature selection in steel manufacturing with an application to blast furnace top gas efficiency. Computational Materials Science, 186 . 110053. doi:10.1016/j.commatsci.2020.110053 ISSN 0927-0256.

Stoneman, Paul and Battisti, Giuliana (1997) Intra-firm diffusion of new technologies : the neglected part of technology transfer. International Journal Of Industrial Engineering-Applications And Practice, 4 (4). pp. 270-282. ISSN 1072-4761.

Sudarsan, C., Banker, K. H., Hazra, S. K. , Bhagat, Rohit and Panda, S. K. (2019) Experimental investigations on forming limit diagram of ultra thin SS 304 steel : effect of circular grid size, sheet orientation, punch size and deformation speed. Advances in Materials and Processing Technologies, 5 (1). pp. 25-38. doi:10.1080/2374068X.2018.1510679 ISSN 2374-068X.

Sun, Tianzhu, Ferguson, Nesta, Liu, Conghui, Gibbons, Greg and Franciosa, Pasquale (2022) Application of adjustable ring mode laser in remote laser welding of additive manufactured AlSi10Mg alloy. Journal of Laser Applications, 34 (4). 042007. doi:10.2351/7.0000794 ISSN 1042-346X.

Sun, Tianzhu, Franciosa, Pasquale, Liu, Conghui, Pierro, Fabio and Ceglarek, Dariusz (2021) Effect of micro solidification crack on mechanical performance of remote laser welded AA6063-T6 fillet lap joint in automotive battery tray construction. Applied Sciences, 11 (10). 4522. doi:10.3390/app11104522 ISSN 2076-3417.

Sun, Tianzhu, Franciosa, Pasquale, Sokolov, Mikhail and Ceglarek, Darek (2020) Challenges and opportunities in laser welding of 6xxx high strength aluminium extrusions in automotive battery tray construction. Procedia CIRP, 94 . pp. 565-570. doi:10.1016/j.procir.2020.09.076 ISSN 2212-8271.

Sun, Tianzhu, Liu, Conghui, Franciosa, Pasquale, Ferguson, Nesta, Gibbons, Gregory John, Ceglarek, Dariusz, Mogire, Evans and Zhang, Peilei (2023) Effect of placement configuration on the microstructure, porosity and mechanical performance of dissimilar remote laser welding of additive manufactured AlSi10Mg alloy and conventionally manufactured 1050 aluminium sheets. Journal of Materials Research and Technology, 27 . pp. 5639-5650. doi:10.1016/j.jmrt.2023.11.077 ISSN 2238-7854.

Sun, Tianzhu, Mohan, Anand, Liu, Conghui, Franciosa, Pasquale and Ceglarek, Dariusz (2022) The impact of Adjustable-Ring-Mode (ARM) laser beam on the microstructure and mechanical performance in remote laser welding of high strength aluminium alloys. Journal of Materials Research and Technology, 21 . pp. 2247-2261. doi:10.1016/j.jmrt.2022.10.055 ISSN 2238-7854.

Taylor, Phillip M., Griffiths, Nathan, Bhalerao, Abhir, Sarabjot, Anand, Popham, Thomas, Zhou, Xu and Gelencser, Adam (2016) Data mining for vehicle telemetry. Applied Artificial Intelligence, 30 (3). pp. 233-256. doi:10.1080/08839514.2016.1156954 ISSN 0883-9514.

Taylor, S., Janik, V., Grimes, Roger and Dashwood, R. J. (2023) Study on the influence of nickel additions on AA7020 formability under superplastic forming like conditions. Metals and Materials International . doi:10.1007/s12540-023-01396-9 ISSN 1598-9623. (In Press)

Taylor, Scott, Dhara, Sisir, Slater, Carl and Kotadia, Hiren (2023) Identifying optimal hot forming conditions for AA6010 alloy by means of elevated temperature tensile testing. Metals, 13 (1). 76. doi:10.3390/met13010076 ISSN 2075-4701.

Thornby, John Albert, MacKay, Robert S. and Williams, M. A. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. doi:10.1093/imamat/hxv020 ISSN 0272-4960.

Tian, Yanling, Yang, Mingxuan, Wang, Fujun, Zhou, Chongkai, Zhao, Xingyu and Zhang, Dawei (2019) A unified element stiffness matrix model for variable cross-section flexure hinges in compliant mechanisms for micro/nano positioning. Microsystem Technologies, 25 . pp. 4257-4268. doi:10.1007/s00542-019-04410-6 ISSN 0946-7076.

Tkocz, Jozef, Greenshields, David and Dixon, Steve M. (2019) High power phased EMAT arrays for nondestructive testing of as-cast steel. NDT & E International, 102 . pp. 47-55. doi:10.1016/j.ndteint.2018.11.001 ISSN 0963-8695.

Tolio, T., Ceglarek, Darek, ElMaraghy, H. A., Fischer, A., Hu, S. J., Laperriere, L., Newman, S. T. and Vancza, J. (2010) SPECIES-Co-evolution of products, processes and production systems. CIRP Annals - Manufacturing Technology, Vol.59 (No.2). pp. 672-693. doi:10.1016/j.cirp.2010.05.008 ISSN 0007-8506.

Toreini, Ehsan, Shahandashti, Siamak F. and Hao, Feng (2017) Texture to the rescue : practical paper fingerprinting based on texture patterns. ACM Transactions on Privacy and Security, 20 (3). pp. 1-29. doi:10.1145/3092816 ISSN 2471-2566.

Trendl, Anna, Owen, A., Vomfell, Lara, Kilian, L., Gathergood, J., Stewart, Neil and Leake, D. (2023) Estimating carbon footprints from large scale financial transaction data. Journal of Industrial Ecology . doi:10.1111/jiec.13351 ISSN 1088-1980. (In Press)

Ugurluoglu, Yusuf Furkan, Ferreira, Ana Marina, Gentile, Piergiorgio and Munguia, Javier (2023) Conceptual design and development of a progressive cavity pump for extrusion-based additive manufacturing applications. CIRP Journal of Manufacturing Science and Technology, 46 . pp. 191-203. doi:10.1016/j.cirpj.2023.08.011 ISSN 1755-5817.

Ulahannan, Arun, Cain, Rebecca, Thompson, Simon, Skrypchuk, Lee, Mouzakitis, Alexandros, Jennings, Paul. A. and Birrell, Stewart A. (2020) User expectations of partial driving automation capabilities and their effect on information design preferences in the vehicle. Applied Ergonomics, 82 . 102969. doi:10.1016/j.apergo.2019.102969 ISSN 0003-6870.

Urasinska-Wojcik, Barbara, Chilton, Neil, Todd, Peter M., Elsworthy, Christopher, Bates, Myles, Roberts, Gethin and Gibbons, Gregory John (2019) Integrated manufacture of polymer and conductive tracks for real-world applications. Additive Manufacturing, 29 . 100777. doi:10.1016/j.addma.2019.06.028 ISSN 2214-8604 .

Van, Mien, Sam Ge, Shuzhi and Ceglarek, Dariusz (2022) Global finite‐time cooperative control for multiple manipulators using integral sliding mode control. Asian Journal of Control, 24 (6). pp. 2862-2876. doi:10.1002/asjc.2706 ISSN 1561-8625.

Voisey, K. T., Folkes, J., Srithorn, J. and Hughes, Darren J. (2014) Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V. Physics Procedia, Volume 56 . pp. 1277-1285. doi:10.1016/j.phpro.2014.08.051 ISSN 1875-3892.

Wairagkar, Maitreyee, Lima, Maria R., Bazo, Daniel, Craig, Richard, Weissbart, Hugo, Etoundi, Appolinaire C., Reichenbach, Tobias, Iyengar, Prashant, Vaswani, Sneh, James, Christopher, Barnaghi, Payam, Melhuish, Chris and Vaidyanathan, Ravi (2022) Emotive response to a hybrid-face robot and translation to consumer social robots. IEEE Internet of Things Journal, 9 (5). pp. 3174-3188. doi:10.1109/JIOT.2021.3097592 ISSN 2327-4662.

Wan, Zhongyuan, Wai Hin, Lee, Shegiwal, Ataulla and Haddleton, David M. (2023) Reversible bond formation via sulfur free reversible addition fragmentation in photo-3D printing. European Polymer Journal, 196 . 112324. doi:10.1016/j.eurpolymj.2023.112324 ISSN 0014-3057.

Wang, H., Yang, J. and Ceglarek, Darek (2009) A graph-based data structure for assembly dimensional variation control at a preliminary phase of product design. International Journal of Computer Integrated Manufacturing , Vol.22 (No.10). pp. 948-961. doi:10.1080/09511920902942855 ISSN 0951-192X.

Wang, Haixia and Ceglarek, Darek (2009) Variation propagation modeling and analysis at preliminary design phase of multi-station assembly systems. Assembly Automation, Vol.29 (No.2). pp. 154-166. doi:10.1108/01445150910945606 ISSN 0144-5154.

Wang, Haonan, Xu, Tianhua, Wang, Ziyihui, Liu, Yize, Chen, Huaixu, Jiang, Junfeng and Liu, Tiegen (2023) Highly sensitive and label-free detection of biotin using liquid crystal-based optofluidic biosensor. Biomedical Optics Express, 14 (7). pp. 3763-3774. doi:10.1364/BOE.494783 ISSN 2156-7085.

Wang, Manxin, Liu, Haitao, Huang, Tian and Chetwynd, D. G. (2015) Compliance analysis of a 3-SPR parallel mechanism with consideration of gravity. Mechanism and Machine Theory, 84 . pp. 99-112. doi:10.1016/j.mechmachtheory.2014.10.002 ISSN 0094-114X.

Wang, Qiangqiang, Zhang, Lifeng and Sridhar, Seetharaman (2016) Modeling on fluid flow and inclusion motion in centrifugal continuous casting strands. Metallurgical and Materials Transactions B, 47 (4). pp. 2623-2642. doi:10.1007/s11663-016-0701-2 ISSN 1073-5615.

Wang, Shuyi, Su, Daizhong, Wu, You and Chai, Zijian (2020) Application of life-cycle assessment to the eco-design of LED lighting products. Euro-Mediterranean Journal for Environmental Integration, 5 (2). 41. doi:10.1007/s41207-020-00180-0 ISSN 2365-6433.

Wang, Wenkai, Fan, Haojun, Song, Lijiang, Wang, Zhenya, Li, Heng, Xiang, Jun, Huang, Qiang and Chen, Xiangquan (2022) Organosilicon leather coating technology based on carbon peak strategy. Journal of Leather Science and Engineering, 4 (1). 27. doi:10.1186/s42825-022-00101-7 ISSN 2524-7859.

Wang, Yi, Zhang, Lifeng, Ren, Ying, Li, Zushu, Slater, Carl, Peng, Kaiyu, Liu, Fenggang and Zhao, Yanyu (2021) Effect of thermal history on the deformation of non-metallic inclusions during plain strain compression. Metallurgical and Materials Transactions B . doi:10.1007/s11663-021-02116-7 ISSN 1073-5615.

Wang, YouYu, Huang, Tian, Zhao, XueMan, Mei, Jiangping and Chetwynd, D. G. (2008) A semi-analytical approach for stiffness modeling of PKM by considering compliance of machine frame with complex geometry. Chinese Science Bulletin, Volume 53 (Number 16). pp. 2565-2574. doi:10.1007/s11434-008-0298-1 ISSN 1001-6538.

Wang, Zhanjun, Liu, Yuyang, Zhong, Ming, Li, Zushu and Wang, Cong (2022) Bubble evolution behaviors induced by CaO-Al2O3-SiO2-CaF2 fluxes subjected to high heat input submerged arc welding. Metallurgical and Materials Transactions B, 53 . pp. 2763-2767. doi:10.1007/s11663-022-02598-z ISSN 1073-5615.

Wang, Zhenbo, Xing, Wenxun and Chen, Bo (2009) On-line service scheduling. Journal of Scheduling, Vol.12 (No.1). pp. 31-43. doi:10.1007/s10951-008-0075-7 ISSN 1094-6136.

Wang, Ziyihui, Liu, Yize, Wang, Haonan, Wang, Shuang, Liu, Kun, Xu, Tianhua, Jiang, Junfeng, Chen, Yu-Cheng and Liu, Tiegen (2022) Ultra-sensitive DNAzyme-based optofluidic biosensor with liquid crystal-Au nanoparticle hybrid amplification for molecular detection. Sensors and Actuators B: Chemical, 359 . 131608. doi:10.1016/j.snb.2022.131608 ISSN 0925-4005.

Warren, Patrick B., Ball, Robin and Goldstein, Raymond E. (2018) Why clothes don’t fall apart : tension transmission in staple yarns. Physical Review Letters, 120 (15). 158001. doi:10.1103/PhysRevLett.120.158001 ISSN 1079-7114.

Weems, Andrew C., Arno, Maria C., Yue, Wei, Huckstepp, Robert T. R. and Dove, Andrew P. (2021) 4D polycarbonates via stereolithography as scaffolds for soft tissue repair. Nature Communications, 12 (1). 3771. doi:10.1038/s41467-021-23956-6 ISSN 2041-1723.

Wemyss, Alan M., Marathianos, Arkadios, Heeley, Ellen L., Ekeocha, James, Morishita, Yoshihiro, di Ronza, Raffaele, Bernal, M. Mar, Haddleton, David M. and Wan, Chaoying (2022) Oligomeric curing activators enable conventional sulfur-vulcanized rubbers to self-heal. ACS Applied Polymer Materials, 4 (10). pp. 7868-7877. doi:10.1021/acsapm.2c01398 ISSN 2637-6105.

Wen, Huii-I, Zhang, Shu-jun, Hapeshi, Kevin and Wang, Xiao-feng (2008) An innovative methodology of product design from nature. Journal of Bionic Engineering, Volume 5 (Number 1). pp. 75-84. doi:10.1016/S1672-6529(08)60009-8 ISSN 1672-6529.

Whiston, James, Spooner, Stephen, Meijer, Koen and Li, Zushu (2021) Observation of the reactions between iron ore and metallurgical fluxes for the alternative ironmaking HIsarna Process. Ironmaking & Steelmaking, 48 (10). pp. 1142-1150. doi:10.1080/03019233.2021.1948316 ISSN 0301-9233.

Williams, Ellis, Piaggio, Davide, Andellini, Martina and Pecchia, Leandro (2022) 3D-printed activated charcoal inlet filters for oxygen concentrators : a circular economy approach. Development Engineering, 7 . 100094. doi:10.1016/j.deveng.2022.100094 ISSN 2352-7285.

Williams, M. A. (Mark A.) and Kochhar, A. K. (2000) New product introduction practices in the British manufacturing industry. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (10). pp. 853-863. doi:10.1243/0954405001517946 ISSN 0954-4054.

Williams, M. A. (Mark A.), Kochhar, A. K. and Tennant, C. (2007) An object-oriented reference model of the fuzzy front end of the new product introduction process. International Journal of Advanced Manufacturing Technology, Vol.34 (No.7-8). pp. 826-841. doi:10.1007/s00170-006-0645-9 ISSN 0268-3768.

Wilson, John W, Zhou, Lei, Davis, Claire and Peyton, Anthony J (2021) High temperature magnetic characterisation of structural steels using Epstein frame. Measurement Science and Technology, 32 (12). 125601. doi:10.1088/1361-6501/ac17fa ISSN 1361-6501.

Wilson, Paul, Griffiths, Susan, Williams, Ellis, Smith, M. Paul and Williams, Mark A. (2020) Designing 3-D prints for blind and partially sighted audiences in museums : exploring the needs of those living with sight loss. Visitor Studies, 23 (2). pp. 120-140. doi:10.1080/10645578.2020.1776562 ISSN 1064-5578.

Wilson, Paul F., Donnelly, Michael, King, Ellie, Williams, Mark A. and Cooley, Alison (2023) Reverse-engineering history : re-presenting the Chichester tablet using laser scanning and 3D printing. Studies in Conservation, 68 (8). 773-783 . doi:10.1080/00393630.2022.2131204 ISSN 0039-3630.

Wilson, Peter R., Ratner, Alon, Stocker, Gary, Syred, Frank, Kirwan, Kerry and Coles, Stuart R. (2020) Interlayer hybridization of virgin carbon, recycled carbon and natural fiber laminates. Materials, 13 (21). 4955. doi:10.3390/ma13214955 ISSN 1996-1944.

Wood, Benjamin M., Coles, Stuart R., Maggs, Steven J., Meredith, James O. and Kirwan, Kerry (2011) Use of lignin as a compatibiliser in hemp/epoxy composites. Composites Science and Technology, Vol.71 (No.16). pp. 1804-1810. doi:10.1016/j.compscitech.2011.06.005 ISSN 0266-3538.

Wood, Grace E., Marsden, Alexander J., Mudd, James J., Walker, Marc, Asensio, Maria-Carmen, Avila, José, Cheng, Kai, Bell, Gavin R. and Wilson, Neil R. (2015) van der Waals epitaxy of monolayer hexagonal boron nitride on copper foil : growth, crystallography and electronic band structure. 2D Materials, 2 (2). 025003. doi:10.1088/2053-1583/2/2/025003 ISSN 2053-1583.

Wu, Fanfu, Zhou, Lei, Soulard, Juliette, Silvester, Ben and Davis, Claire (2022) Quantitative characterisation and modelling of the effect of cut edge damage on the magnetic properties in NGO electrical steel. Journal of Magnetism and Magnetic Materials, 551 . 169185. doi:10.1016/j.jmmm.2022.169185 ISSN 0304-8853.

Wu, Long, Dong, Chenglin, Wang, Guofeng, Liu, Haitao and Huang, Tian (2021) An approach to predict lower-order dynamic behaviors of a 5-DOF hybrid robot using a minimum set of generalized coordinates. Robotics and Computer-Integrated Manufacturing, 67 . 102024. doi:10.1016/j.rcim.2020.102024 ISSN 0736-5845.

Xia, Zhenyan, Xiao, Yuhe, Yang, Zhen, Li, Linan, Wang, Shibin, Tian, Yanling and Liu, Xianping (2019) Droplet impact on the super-hydrophobic surface with micro-pillar arrays fabricated by hybrid laser ablation and silanization process. Materials, 12 (5). 765. doi:10.3390/ma12050765 ISSN 1996-1944.

Yan, Zhiming, Li, Zushu, Manocha, Sanjeev, Ponchon, Francois and Nafornita, Sorinel (2022) Value in use of lime in BOF steelmaking process. Ironmaking & Steelmaking, 49 (1). pp. 42-48. doi:10.1080/03019233.2021.1966233 ISSN 0301-9233.

Yan, Zhiming, Sattar, Anwar and Li, Zushu (2023) Priority lithium recovery from spent Li-ion batteries via carbothermal reduction with water leaching. Resources, Conservation and Recycling, 192 . 106937. doi:10.1016/j.resconrec.2023.106937 ISSN 0921-3449.

Yang, Cheng-juan, Mei, Xue-song, Tian, Yanling, Zhang, Da-wei, Li, Yuan and Liu, Xianping (2016) Modification of wettability property of titanium by laser texturing. The International Journal of Advanced Manufacturing Technology, 87 (5-8). pp. 1663-1670. doi:10.1007/s00170-016-8601-9 ISSN 0268-3768.

Yang, Xinliang, Gao, Feng, Tang, Fengzai, Hao, Xinjiang and Li, Zushu (2021) Effect of surface oxides on the melting and solidification of 316L stainless steel powder for additive manufacturing. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 52 . pp. 4518-4532. doi:10.1007/s11661-021-06405-3 ISSN 1073-5623.

Yang, Xinliang, Gibbons, Gregory John, Tanner, David A., Li, Zushu, Wilson, Paul, Williams, Mark A. and Kotadia, Hiren R. (2023) Scan strategy induced microstructure and consolidation variation in the Laser-Powder Bed Fusion (L-PBF) Additive Manufacturing of low alloy 20MnCr5 steel. Materials & Design, 232 . 112160. doi:10.1016/j.matdes.2023.112160 ISSN 0264-1275.

Yang, Xinliang, Tang, Fengzai, Hao, Xinjiang and Li, Zushu (2021) Oxide evolution during the solidification of 316L stainless steel from additive manufacturing powders with different oxygen contents. Metallurgical and Materials Transactions B, 52 . pp. 2253-2262. doi:10.1007/s11663-021-02191-w ISSN 1073-5615.

Yang, Zhen, Liu, Xianping and Tian, Yanling (2019) Fabrication of super-hydrophobic nickel film on copper substrate with improved corrosion inhibition by electrodeposition process. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 560 . pp. 205-212. doi:10.1016/j.colsurfa.2018.10.024 ISSN 0927-7757.

Yao, Fengjia, Alkan, Bugra, Ahmad, Bilal and Harrison, Robert (2020) Improving just-in-time delivery performance of IoT-enabled flexible manufacturing systems with AGV based material transportation. Sensors, 20 (21). 6333. doi:10.3390/s20216333 ISSN 1424-8220.

Yearworth, Mike and White, Leroy (2018) Spontaneous emergence of Community OR : self-initiating, self-organising problem structuring mediated by social media. European Journal of Operational Research, 268 (3). pp. 800-824. doi:10.1016/j.ejor.2018.01.024 ISSN 0377-2217.

Yeo, Zhiquan, Masi, Donato, Sze Choong Low, Jonathan, Ng, Yen Ting, Siew Tan, Puay and Barnes, Stuart (2019) Tools for promoting industrial symbiosis : a systematic review. Journal of Industrial Ecology, 23 (5). pp. 1087-1108. doi:10.1111.jiec.12846 ISSN 1088-1980.

Yong, Ching Kiat, Keating, Elspeth, Hughes, Darren J., Connolley, Thomas, West, Geoffrey D., Wong, Chow Cher and Gibbons, Gregory John (2023) Assessment of residual strain in laser shock peened additive manufactured Inconel 718 using synchrotron X-ray diffraction. Materialia, 30 . 101843. doi:10.1016/j.mtla.2023.101843 ISSN 2589-1529.

Yong, Ching-Kiat, Gibbons, Gregory John, Wong, Chow Cher and West, Geoffrey D. (2020) A critical review of the material characteristics of additive manufactured IN718 for high temperature application. Metals, 10 (12). 1576. doi:10.3390/met10121576 ISSN 2075-4701.

Young, Gloria, Tallia, Francesca, Clark, Jeffrey N., Chellappan, Manishankar, Gavalda-Diaz, Oriol, Alcocer, Enric Juan, Ferreira, Silvia A., Rankin, Sara M., Clark, Joshua, Hanna, John V., Jeffers, Jonathan R. T. and Jones, Julian R. (2023) Hybrid materials with continuous mechanical property gradients that can be 3D printed. Materials Today Advances, 17 . 100344. doi:10.1016/j.mtadv.2023.100344 ISSN 2590-0498.

Yuan, Hao, Khan, Muhammad Aurangzeb, Qian, Connie, Reynolds, Neil and Kendall, Kenneth N. (2023) Experimental and numerical investigation of the intra-ply shear behaviour of unidirectional prepreg forming through picture-frame test. Composites Part B: Engineering, 266 . 11036. doi:10.1016/j.compositesb.2023.111036 ISSN 1359-8368.

Yule, Lewis C., Shkirskiy, Viacheslav, Aarons, Jolyon, West, Geoffrey D., Shollock, Barbara A., Bentley, Cameron Luke and Unwin, Patrick R. (2020) Nanoscale electrochemical visualization of grain-dependent anodic iron dissolution from low carbon steel. Electrochimica Acta, 332 . 135267. doi:10.1016/j.electacta.2019.135267 ISSN 0013-4686.

Zengeya, Patrick, Mao, Ken and Goodship, Vannessa (2023) The effects of cooling rate (mould temperature) on HDPE gears produced through injection moulding. Wear, 530-531 . 205000. doi:10.1016/j.wear.2023.205000 ISSN 0043-1648.

Zhang, Yanyun, Wang, Zhanjun, Zhang, Jiawen, Li, Zushu, Basu, Somnath and Wang, Cong (2022) Probing viscosity and structural variations in CaF2–SiO2–MnO welding fluxes. Metallurgical and Materials Transactions B, 53 . pp. 2814-2823. doi:10.1007/s11663-022-02566-7 ISSN 1073-5615.

Zhang, Ye, Mao, Ken, Leigh, Simon, Shah, Akeel, Chao, Zhiming and Ma, Guotao (2020) A parametric study of 3D printed polymer gears. The International Journal of Advanced Manufacturing Technology, 107 (11-12). pp. 4481-4492. doi:10.1007/s00170-020-05270-5 ISSN 0268-3768.

Zhang, Ye, Purssell, Chris, Mao, Ken and Leigh, Simon J. (2020) A physical investigation of wear and thermal characteristics of 3D printed nylon spur gears. Tribology International, 141 . 105953. doi:10.1016/j.triboint.2019.105953 ISSN 0301-679X.

Zhang, Yuxin, Zhang, Zhen, Wemyss, Alan M., Wan, Chaoying, Liu, Yongtao, Song, Pan and Wang, Shifeng (2020) Effective thermal-oxidative reclamation of waste tire rubbers for producing high-performance rubber composites. ACS Sustainable Chemistry & Engineering, 8 (24). pp. 9079-9087. doi:10.1021/acssuschemeng.0c02292 ISSN 2168-0485.

Zhao, C. X., Kwakernaak, C., Pan, Y., Richardson, I.M., Saldi, Z., Kenjeres, S. and Kleijn, C.R. (2010) The effect of oxygen on transitional Marangoni flow in laser spot welding. Acta Materialia, 58 (19). pp. 6345-6357. doi:10.1016/j.actamat.2010.07.056 ISSN 1359-6454.

Zhao, Huan, Han, Li, Liu, Yunpeng and Liu, Xianping (2022) Analysis of joint formation mechanisms for self-piercing riveting (SPR) process with varying joining parameters. Journal of Manufacturing Processes, 73 . pp. 668-685. doi:10.1016/j.jmapro.2021.11.038 ISSN 1526-6125.

Zhao, Jiahui, Green, Ben L., Breeze, Ben G. and Newton, Mark E. (2023) Phosphorescence and donor-acceptor pair recombination in laboratory-grown diamonds. Physical Review B (Condensed Matter and Materials Physics), 108 (16). 165203. doi:10.1103/PhysRevB.108.165203 ISSN 1098-0121.

Zhao, Shuo, Wang, Bingshan, Zhu, Shibin, Song, Gaoyang, Wang, Shuai and Li, Zushu (2023) Optimizing RH refining process to maximize cleanliness of low-carbon low-silicon Al killed steel. Ironmaking & Steelmaking, 50 (5). pp. 451-460. doi:10.1080/03019233.2022.2122772 ISSN 0301-9233.

Zhao, Shuo, Zhu, Shibin, Ge, Yangyang, Wang, Jianfeng, Xu, Dong, Li, Zushu and Chen, Chao (2023) Simulation of fluid flow and inclusion removal in five-flow T-type tundish with porous baffle wall. Metals, 13 (2). 215. doi:10.3390/met13020215 ISSN 2075-4701.

Zheng, Bo, Tang, Yukuo, Xie, Fengwei and Chen, Ling (2022) Effect of pre-printing gelatinization degree on the structure and digestibility of hot-extrusion 3D-printed starch. Food Hydrocolloids, 124 (Part A). 107210. doi:10.1016/j.foodhyd.2021.107210 ISSN 0268-005X.

Zhou, L., Liu, Jun, Hao, X. J., Strangwood, M., Peyton, A. J. and Davis, Claire (2014) Quantification of the phase fraction in steel using an electromagnetic sensor. NDT & E International, 67 . pp. 31-35. doi:10.1016/j.ndteint.2014.06.007 ISSN 0963-8695.

Zhou, Lei, Wu, Fanfu, Hall, Russell and Davis, Claire (2022) Electromagnetic sensors for in-situ dynamic microstructure monitoring of recovery and recrystallisation in interstitial free steels. Journal of Magnetism and Magnetic Materials, 551 . 169187. doi:10.1016/j.jmmm.2022.169187 ISSN 0304-8853.

Zhou, Wei, Wu, Zhengguo, Xie, Fengwei, Tang, Shuwei, Fang, Jiawei and Wang, Xiaoying (2021) 3D printed nanocellulose-based label for fruit freshness keeping and visual monitoring. Carbohydrate Polymers, 273 . 118545. doi:10.1016/j.carbpol.2021.118545 ISSN 0144-8617.

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2018) Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion. Additive Manufacturing, 24 . pp. 552-559. doi:10.1016/j.addma.2018.10.040 ISSN 2214-8604 .

Zhu, Y., Slater, Carl, Connolly, S., Farrugia, D. and Davis, Claire (2021) Rapid alloy prototyping for strip steel development : DP800 steel case study. Ironmaking & Steelmaking, 48 (5). pp. 493-504. doi:10.1080/03019233.2021.1880036 ISSN 0301-9233.

Zhu, Yiyun, Blackman, Chris, Zhou, Pengfei, Ayyala, Sai Kiran, Covington, James A., Shen, Yanbai, Liang, Jinsheng, Zhong, Xiangxi, Knapp, Caroline and Zhou, Ye (2023) Facile synthesis of Ag nanoparticles-decorated WO3 nanorods and their application in O2 sensing. Journal of Alloys and Compounds, 936 . 167930. doi:10.1016/j.jallcom.2022.167930 ISSN 0925-8388.

Book Item

Abimbola Okoya, Silifat, Oyinlola, Muyiwa, Schröder, Patrick, Kolade, Oluwaseun and Abolfathi, Soroush (2023) Enhancing decentralised recycling solutions with digital technologies. In: Oyinlola, Muyiwa Adeyinka and Kolade, Oluwaseun, (eds.) Digital Innovations for a Circular Plastic Economy in Africa. Abingdon, Oxon: Routledge. ISBN 9781003278443

Berg, Maxine (2010) The British product revolution of the eighteenth century. In: Horn, Jeff, Ph. D. and Rosenband, Leonard N. and Smith, Merritt Roe, 1940-, (eds.) Reconceptualizing the Industrial Revolution. Cambridge, Mass.: MIT Press, pp. 47-66. ISBN 9780262014519

Berg, Maxine (2015) The merest shadows of a commodity : Indian muslins for European Markets 1750-1800. In: Berg, Maxine, (ed.) Goods from the East, 1600-1800 Trading Eurasia. Europe's Asian Centuries . Palgrave Macmillan, pp. 119-134. ISBN 9781137403940

Goodship, Vannessa (2016) Injection molding of thermoplastics. In: Goodship, Vannessa and Middleton, Bethany J. and Cherrington, Ruth, (eds.) Design and Manufacture of Plastic Components for Multifunctionality. Plastics design library handbook series . Oxford, UK: Elsevier, pp. 103-170. ISBN 9780323340618

Makenji, Kylash and Cherrington, Ruth (2014) Plastic trim. In: Encyclopedia of Automotive Engineering. John Wiley & Sons, Ltd., pp. 1-6. ISBN 9780470974025

Parthasarathi , Prasannan and Riello, Giorgio (2012) From India to the world : cotton and fashionability. In: Trentmann, Frank, (ed.) The Oxford Handbook of the History of Consumption. Oxford Handbooks in History . Oxford : Oxford University Press. ISBN 9780199561216

Roy, Rajat and James-Moore, Mike (2010) Lean product introduction. In: Shyy, Wei and Blockley, Richard, (eds.) Encyclopedia of Aerospace Engineering. Hoboken, NJ, U.S.A.: John Wiley & Sons, Inc.. ISBN 9780470686652

Veshagh, Alireza and Obagun, Adeola (2007) Survey of sustainable life cycle design and management. In: Takata, S. and Umeda, Y., (eds.) Survey of Sustainable Life Cycle Design and Management : Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th–13th, 2007. Springer-Verlag, pp. 237-242. ISBN 9781846289347

Williams, M., Williams, M. A. (Mark A.) and Vosniakos, G. (1997) On reference modelling of integrated manufacturing systems using Object-Oriented Analysis (OOA). In: IFIP Transactions B-17, Information Infrastructure Systems For Manufacturing. UNSPECIFIED, pp. 91-102. ISBN 0444818502

Woolman, Tim and Veshagh, Alireza (2007) Development of a management tool for assessing environmental performance in SMEs' design and production. In: Takata, S. and Umeda, Y., (eds.) Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses : Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th–13th, 2007. Heidelberg : Springer-Verlag, pp. 383-388. ISBN 9781846289347

Conference Item

UNSPECIFIED (1997) Application of case based reasoning in injection moulding. In: 3rd Asia Pacific Conference on Materials Processing, HONG KONG, HONG KONG, NOV 12-14, 1996. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 63 (1-3). pp. 463-467. ISSN 0924-0136.

UNSPECIFIED (1998) Autotuning with multiharmonic perturbations - Part I nonparametric closed loop identification. In: UKACC International Conference on Control 98, UNIV WALES UNIV COLL SWANSEA, SWANSEA, WALES, SEP 01-04, 1998. Published in: UKACC INTERNATIONAL CONFERENCE ON CONTROL '98, VOLS I&II pp. 1344-1349. ISBN 0-85296-708-X.

UNSPECIFIED (1998) Autotuning with multiharmonic perturbations - Part II - Computational improvements and identification of arbitrary critical points. In: UKACC International Conference on Control 98, UNIV WALES UNIV COLL SWANSEA, SWANSEA, WALES, SEP 01-04, 1998. Published in: UKACC INTERNATIONAL CONFERENCE ON CONTROL '98, VOLS I&II pp. 1350-1355. ISBN 0-85296-708-X.

UNSPECIFIED (1994) CULTURAL-ASPECTS OF THE DESIGN OF ADVANCED MANUFACTURING TECHNOLOGIES INTEGRATING TECHNOLOGY, ORGANIZATION AND PEOPLE. In: 4th International Conference on Human Aspects of Advanced Manufacturing and Hybrid Automation, MANCHESTER, ENGLAND, JUL 06-08, 1994. Published in: ADVANCES IN AGILE MANUFACTURING, 4 pp. 165-168. ISBN 90-5199-176-2.

UNSPECIFIED (2000) Collaborative R&D projects: A best practice management model MANAGEMENT IN THE 21ST CENTURY. In: IEEE International Conference on Management of Innovation and Technology (ICMIT 2000), SINGAPORE, SINGAPORE, NOV 12-15, 2000. Published in: PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL CONFERENCE ON MANAGEMENT OF INNOVATION AND TECHNOLOGY, VOLS 1 AND 2 pp. 217-223. ISBN 0-7803-6652-2.

UNSPECIFIED (2000) Collaborative R&D projects: A framework for effective management MANAGEMENT IN THE 21ST CENTURY. In: IEEE International Conference on Management of Innovation and Technology (ICMIT 2000), SINGAPORE, SINGAPORE, NOV 12-15, 2000. Published in: PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL CONFERENCE ON MANAGEMENT OF INNOVATION AND TECHNOLOGY, VOLS 1 AND 2 pp. 210-216. ISBN 0-7803-6652-2.

UNSPECIFIED (1997) Concurrent engineering in product introduction: some requirements for information management CONFERENCE THEME: SUSTAINABLE MANUFACTURING FOR GLOBAL BUSINESS. In: 1st International Conference on Managing Enterprises - Stakeholders, Engineering, Logistics, and Achievement (ME-SELA 97) - Sustainable Manufacturing for Global Business, LOUGHBOROUGH UNIV, LOUGHBOROUGH, ENGLAND, JUL 22-24, 1997. Published in: FIRST INTERNATIONAL CONFERENCE: MANAGING ENTERPRISES - STAKEHOLDERS, ENGINEERING, LOGISTICS, AND ACHIEVEMENT (ME-SELA'97) pp. 561-566. ISBN 1-86058-066-1.

UNSPECIFIED (1997) Conditioning of the manufacturing process using surface finish. In: 3rd International Conference on Laser Metrology and Machine Performance (LAMDAMAP 97), UNIV HUDDERSFIELD, HUDDERSFIELD, ENGLAND, 1997. Published in: LASER METROLOGY AND MACHINE PERFORMANCE III pp. 3-20. ISBN 1-85312-536-9.

UNSPECIFIED (2002) Constraint modelling using object-based kriging. In: Engineering Design Conference 2002, KINGS COLL, LONDON, ENGLAND, JUL 09-11, 2002. Published in: COMPUTER-BASED DESIGN pp. 589-596. ISBN 1-86058-372-5.

UNSPECIFIED (2003) Cost effective reprocessing of polyurethane by hot compression moulding. In: 9th International Manufacturing Conference, HONG KONG, PEOPLES R CHINA, AUG 16-17, 2000. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 139 (1-3). pp. 322-326. doi:10.1016/S0924-0136(03)00548-X ISSN 0924-0136.

UNSPECIFIED (1998) Creating the conditions for innovation - research programme. In: 14th National Conference on Manufacturing Research, UNIV DERBY, DERBY, ENGLAND, SEP 07-09, 1998. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY XII pp. 685-691. ISBN 1-86058-172-2.

UNSPECIFIED (1996) Demystification of concurrent engineering. In: 12th International Conference on CAD/CAM Robotics and Factories of the Future, MIDDLESEX UNIV LONDON, LONDON, ENGLAND, AUG 14-16, 1996. Published in: CAD/CAM ROBOTICS AND FACTORIES OF THE FUTURE pp. 981-987. ISBN 1-898253-03-X.

UNSPECIFIED (1998) Developing a simulation strategy for British Airways OR. In: 1998 Winter Simulation Conference on Simulation in the 21st-Century (WSC 98), WASHINGTON, D.C., DEC 13-16, 1998. Published in: 1998 WINTER SIMULATION CONFERENCE PROCEEDINGS, VOLS 1 AND 2 pp. 1183-1189. ISBN 0-7803-5133-9.

UNSPECIFIED (1997) Development of a manufacturing engineering system for the motor industry THE KEY TO GLOBAL LEADERSHIP. In: Portland International Conference on Management of Engineering and Technology (PICMET 97), PORTLAND, OR, JUL 27-31, 1997. Published in: INNOVATION IN TECHNOLOGY MANAGEMENT - THE KEY TO GLOBAL LEADERSHIP pp. 668-671. ISBN 0-7803-3574-0.

UNSPECIFIED (1998) Development of an information model for concurrent engineering in product introduction DESIGN REUSE. In: Engineering Design Conference '98, BRUNEL UNIV, UXBRIDGE, ENGLAND, JUN 23-25, 1998. Published in: ENGINEERING DESIGN CONFERENCE '98 pp. 603-611. ISBN 1-86058-132-3.

UNSPECIFIED (1994) ENVIRONMENTAL SIMULATION IN THE DEVELOPMENT OF CRITICAL SYSTEMS. In: 1994 European Simulation Multiconference - Modelling and Simulation 1994, UNIV POLITECN CATALYNYA, BARCELONA, SPAIN, JUN 01-03, 1994. Published in: MODELLING AND SIMULATION, ESM 94 pp. 98-102. ISBN 1-56555-028-5.

UNSPECIFIED (1995) Efficient characterization of surface topography in cylinder bores. In: 10th Annual Meeting of the American-Society-for-Precision-Engineering, AUSTIN, TX, OCT 15-20, 1995. Published in: PROCEEDINGS OF THE TENTH ANNUAL MEETING - THE AMERICAN SOCIETY FOR PRECISION ENGINEERING pp. 396-399. ISBN 1-887706-14-3.

UNSPECIFIED (1998) Emulator technology in complex engineering environments - Keynote paper DESIGN REUSE. In: Engineering Design Conference '98, BRUNEL UNIV, UXBRIDGE, ENGLAND, JUN 23-25, 1998. Published in: ENGINEERING DESIGN CONFERENCE '98 pp. 67-76. ISBN 1-86058-132-3.

UNSPECIFIED (2001) Error analysis of data acquisition of reverse engineering process using design of experiment. In: 18th National Conference on Manufacturing Research, LEEDS METROPOLITAN UNIV, LEEDS, ENGLAND, SEP 10-12, 2002. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY-XVI pp. 145-150. ISBN 1-86058-378-4.

UNSPECIFIED (1995) FINE PLASMA CUTTING OF ADVANCED AEROSPACE MATERIALS. In: 2nd Asia Pacific Conference on Materials Processing, SINGAPORE, SINGAPORE, NOV 16-18, 1994. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 48 (1-4). pp. 825-831. ISSN 0924-0136.

UNSPECIFIED (2001) Function maps and the role of surfaces. In: 8th International Conference on Metrology and Properties of Engineering Surfaces, HUDDERSFIELD, ENGLAND, APR 26-29, 2000. Published in: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 41 (13-14). pp. 1847-1861. ISSN 0890-6955.

UNSPECIFIED (2000) Generating e-capability: The case of HSBC in the UK MANAGEMENT IN THE 21ST CENTURY. In: IEEE International Conference on Management of Innovation and Technology (ICMIT 2000), SINGAPORE, SINGAPORE, NOV 12-15, 2000. Published in: PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL CONFERENCE ON MANAGEMENT OF INNOVATION AND TECHNOLOGY, VOLS 1 AND 2 pp. 629-633. ISBN 0-7803-6652-2.

UNSPECIFIED (1992) HIGH-SPEED MILLING OF NICKEL-BASED SUPERALLOYS. In: 7TH CONF OF THE IRISH MANUFACTURING COMMITTEE ON ADVANCED MANUFACTURING TECHNOLOGY, UNIV DUBLIN, TRINITY COLL, DUBLIN, IRELAND, AUG 29-31, 1990. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 33 (4). pp. 429-437. ISSN 0924-0136.

UNSPECIFIED (1997) Heating performance of electrolytic heat-treatment in aqueous solution by pulse current. In: 3rd Asia Pacific Conference on Materials Processing, HONG KONG, HONG KONG, NOV 12-14, 1996. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 63 (1-3). pp. 833-838. ISSN 0924-0136.

UNSPECIFIED (2001) Implications of E-business for small to medium-sized enterprises. In: 17th National Conference on Manufacturing Research, CARDIFF UNIV, CARDIFF, WALES, SEP 04-06, 2001. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XV pp. 313-318. ISBN 1-86058-325-3.

UNSPECIFIED (1997) Improvement of adhesive bonding in aluminium alloys using a laser surface texturing process. In: 3rd Asia Pacific Conference on Materials Processing, HONG KONG, HONG KONG, NOV 12-14, 1996. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 63 (1-3). pp. 579-584. ISSN 0924-0136.

UNSPECIFIED (2003) Improving the business performance of an SME in the UK through strategic quality management. In: 1st International Conference on Manufacturing Research (ICMR2003) Incorporating with the 19th National Conference on Manufacturing Research (NCMR), UNIV STRATHCLYDE, GLASGOW, SCOTLAND, SEP 09-11, 2003. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XVII pp. 493-497. ISBN 1-86058-412-8.

UNSPECIFIED (2002) In mould painting using granular injected paint technology ADVANCES IN PLASTIC INJECTION MOULDING TECHNOLOGY. In: International Conference on Advances in Injection Moulding Technology, BARCELONA, SPAIN, MAR 18-19, 2002. Published in: INJECTION MOULDING 2002, CONFERENCE PROCEEDINGS pp. 207-216. ISBN 1-85957-314-2.

UNSPECIFIED (2002) KoolGas (TM) - Innovation in injection moulding ADVANCES IN PLASTIC INJECTION MOULDING TECHNOLOGY. In: International Conference on Advances in Injection Moulding Technology, BARCELONA, SPAIN, MAR 18-19, 2002. Published in: INJECTION MOULDING 2002, CONFERENCE PROCEEDINGS pp. 95-103. ISBN 1-85957-314-2.

UNSPECIFIED (1997) Linking knowledge based engineering techniques to the finite element analysis of structures. In: 5th International Conference on Computer Aided Optimum Design of Structures (OPTI 97), ROME, ITALY, SEP 08-10, 1997. Published in: COMPUTER AIDED OPTIMUM DESIGN OF STRUCTURES V pp. 415-424. ISBN 1-85312-458-3.

UNSPECIFIED (2003) Macro segregation in thin walled castings produced via the direct squeeze casting process. In: 9th International Manufacturing Conference, HONG KONG, PEOPLES R CHINA, AUG 16-17, 2000. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 138 (1-3). pp. 306-310. doi:10.1016/S0924-0136(03)00090-6 ISSN 0924-0136.

UNSPECIFIED (2003) Macrosegregation in thin walled castings produced via the direct squeeze casting process. In: 9th International Manufacturing Conference, HONG KONG, PEOPLES R CHINA, AUG 16-17, 2000. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 138 (Sp. Iss. SI). pp. 306-310. doi:10.1016/S0924-0136(03)00090-6 ISSN 0924-0136.

UNSPECIFIED (2000) Managing the virtual team and controlling effectiveness. In: 15th International Conference of Production Research(ICPR-15), UNIV LIMERICK, LIMERICK, IRELAND, AUG, 1999. Published in: INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 38 (17). pp. 4019-4032. ISSN 0020-7543.

UNSPECIFIED (2000) Manufacturing competitiveness and fitness landscape theory. In: 15th International Conference on Computer-Aided Production Engineering (CAPE'99), DURHAM, ENGLAND, APR 19-21, 1999. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 107 (1-3). pp. 347-352. ISSN 0924-0136.

UNSPECIFIED (1995) Measurement of friction at light loads in polypyrrole thin film bearings. In: 10th Annual Meeting of the American-Society-for-Precision-Engineering, AUSTIN, TX, OCT 15-20, 1995. Published in: PROCEEDINGS OF THE TENTH ANNUAL MEETING - THE AMERICAN SOCIETY FOR PRECISION ENGINEERING pp. 368-371. ISBN 1-887706-14-3.

UNSPECIFIED (2003) Metal spray tooling for composite forming. In: 9th International Manufacturing Conference, HONG KONG, PEOPLES R CHINA, AUG 16-17, 2000. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 138 (1-3). pp. 443-448. doi:10.1016/S0924-0136(03)00114-6 ISSN 0924-0136.

UNSPECIFIED (2002) Metal spray tooling for composite forming. In: RAPID Tooling 2002 Conference, WARWICK, ENGLAND, MAR 07, 2002. Published in: RAPID TOOLING 2002, CONFERENCE PROCEEDINGS pp. 51-59. ISBN 1-85957-313-4.

UNSPECIFIED (2002) Mufti-function evaluation of surfaces at micro/nano scales by a new tribological probe microscope. In: 5th International Conference on Frontiers of Design and Manufacturing (ICFDM 2002), DALIAN, PEOPLES R CHINA, JUL 10-12, 2002. Published in: PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON FRONTIERS OF DESIGN AND MANUFACTURING, VOL 1 pp. 34-39. ISBN 0-9580692-1-2.

UNSPECIFIED (1997) On design techniques for approximately linear phase recursive digital filters CIRCUITS AND SYSTEMS IN THE INFORMATION AGE. In: 1997 IEEE International Symposium on Circuits and Systems (ISCAS 97) - Circuits and Systems in the Information Age, HONG KONG, HONG KONG, JUN 09-12, 1997. Published in: ISCAS '97 - PROCEEDINGS OF 1997 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS I - IV pp. 2212-2215. ISBN 0-7803-3583-X.

UNSPECIFIED (1999) Parallel interactions in supply chains. In: International Symposium on Advanced Manufacturing Processes, Systems, and Technologies (AMPST 99), UNIV BRADFORD, BRADFORD, ENGLAND, MAR 30-31, 1999. Published in: ADVANCED MANUFACTURING PROCESSES, SYSTEMS, AND TECHNOLOGIES (AMPST 99) pp. 31-40. ISBN 1-86058-230-3.

UNSPECIFIED (1998) Principles and methodology support system for reengineering the product introduction process. In: 14th National Conference on Manufacturing Research, UNIV DERBY, DERBY, ENGLAND, SEP 07-09, 1998. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY XII pp. 573-580. ISBN 1-86058-172-2.

UNSPECIFIED (1994) RELATIONSHIP BETWEEN QUALITY AND MEASUREMENT. In: 7th International Conference on Production/4th International Conference on High Technology, CHIBA, JAPAN, SEP 15-17, 1994. Published in: ADVANCEMENT OF INTELLIGENT PRODUCTION (1). K77-K93. ISBN 0-444-81901-0.

UNSPECIFIED (1995) Rapid EDM electrodes: Linking rapid prototyping to high volume production. In: 1st National Conference on Rapid Prototyping and Tooling Research, BUCKINGHAMSHIRE COLL, HIGH WYCOMBE, ENGLAND, NOV 06-07, 1995. Published in: FIRST NATIONAL CONFERENCE ON RAPID PROTOTYPING AND TOOLING RESEARCH pp. 211-220. ISBN 0-85298-982-2.

UNSPECIFIED (2002) Rapid manufacturing of high-integrity aerospace components. In: 5th International Conference on Frontiers of Design and Manufacturing (ICFDM 2002), DALIAN, PEOPLES R CHINA, JUL 10-12, 2002. Published in: PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON FRONTIERS OF DESIGN AND MANUFACTURING, VOL 1 pp. 349-354. ISBN 0-9580692-1-2.

UNSPECIFIED (2001) Rapid progress in manufacturing. In: Conference of the Institute-of-Mechanical-Engineers, BIRMINGHAM, ENGLAND, OCT 20, 1999. Published in: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 215 (4). pp. 441-452. ISSN 0954-4054.

UNSPECIFIED (2003) Rapid tooling options compared. In: 4th National Conference on Rapid and Virtual Prototyping and Applications, BUCKINGHAMSHIRE CHILTERNS UNIV COLL, CHALFONT ST GILES, ENGLAND, JUN 19-20, 2003. Published in: RAPID AND VIRTUAL PROTOTYPING AND APPLICATIONS pp. 189-202. ISBN 1-86058-411-X.

UNSPECIFIED (1994) THE SELECTION AND DESIGN OF PPC SYSTEMS. In: 10th National Conference on Manufacturing Research - Advances in Manufacturing Technology VIII, LOUGHBOROUGH UNIV TECH, LOUGHBOROUGH, ENGLAND, SEP 05-07, 1994. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY VIII pp. 203-207. ISBN 0-7484-0254-3.

UNSPECIFIED (2000) Sources of innovation: A study of ten successful new products MANAGEMENT IN THE 21ST CENTURY. In: IEEE International Conference on Management of Innovation and Technology (ICMIT 2000), SINGAPORE, SINGAPORE, NOV 12-15, 2000. Published in: PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL CONFERENCE ON MANAGEMENT OF INNOVATION AND TECHNOLOGY, VOLS 1 AND 2 pp. 407-411. ISBN 0-7803-6652-2.

UNSPECIFIED (2000) Supply chains for mass customisation MANAGEMENT IN THE 21ST CENTURY. In: IEEE International Conference on Management of Innovation and Technology (ICMIT 2000), SINGAPORE, SINGAPORE, NOV 12-15, 2000. Published in: PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL CONFERENCE ON MANAGEMENT OF INNOVATION AND TECHNOLOGY, VOLS 1 AND 2 pp. 777-781. ISBN 0-7803-6652-2.

UNSPECIFIED (1999) Surface measurement fidelity. In: 4th International Conference on Laser Metrology and Machine Performance, UNIV NORTHUMBRIA, NEWCASTLE, ENGLAND, JUL, 1999. Published in: LASER METROLOGY AND MACHINE PERFORMANCE IV pp. 267-276. ISBN 1-85312-661-6.

UNSPECIFIED (2001) Temporal behaviour of flow in rotating cavities. In: 2nd International Symposium on Advances in Computational Heat Transfer, PALM COVE, AUSTRALIA, MAY 20-25, 2001. Published in: CHT'01: ADVANCES IN COMPUTATIONAL HEAT TRANSFER II, VOLS 1 AND 2, PROCEEDINGS pp. 655-662. ISBN 1-56700-158-0.

UNSPECIFIED (1999) TiNi shape memory alloy thin films for micromanipulation and microactuation. In: 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology, Bremen, GERMANY, MAY 31-JUN 04, 1999. Published in: PRECISION ENGINEERING, NANOTECHNOLOGY, VOL 1, PROCEEDINGS pp. 498-501. ISBN 3-8265-6085-X.

UNSPECIFIED (1999) Towards a system for business process design from re-usable library elements. In: 15th National Conference on Manufacturing Research, UNIV BATH, BATH, ENGLAND, SEP 06-08, 1999. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XIII pp. 383-387. ISBN 1-86058-227-3.

UNSPECIFIED (1999) Towards a template for new product introduction. In: 15th National Conference on Manufacturing Research, UNIV BATH, BATH, ENGLAND, SEP 06-08, 1999. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XIII pp. 369-373. ISBN 1-86058-227-3.

UNSPECIFIED (2000) Towards lean product development. In: 16th National Conference on Manufacturing Research, UNIV E LONDON, LONDON, ENGLAND, SEP 05-07, 2000. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XIV pp. 101-105. ISBN 1-86058-267-2.

UNSPECIFIED (1995) VLSI implementation of a new bit-level pipelined architecture for 2-D allpass digital filters. In: 1995 IEEE International Symposium on Circuits and Systems (ISCAS-1995), SEATTLE, WA, APR 30-MAY 03, 1995. Published in: 1995 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1-3 pp. 724-727. ISBN 0-7803-2570-2. ISSN 0277-674X.

UNSPECIFIED (1997) Validation of rapid prototyping material for rapid experimental stress analysis. In: 8th Solid Freeform Fabrication (SFF) Symposium, UNIV TEXAS, AUSTIN, TX, AUG 11-13, 1997. Published in: SOLID FREEFORM FABRICATION PROCEEDINGS, SEPTEMBER 1997 pp. 635-642. ISBN *************. ISSN 1053-2153.

UNSPECIFIED (2001) The application of business process re-engineering in the UK - a study of the key factors for success. In: 18th National Conference on Manufacturing Research, LEEDS METROPOLITAN UNIV, LEEDS, ENGLAND, SEP 10-12, 2002. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY-XVI pp. 81-86. ISBN 1-86058-378-4.

UNSPECIFIED (1996) The development of user-centered advanced manufacturing technology: New design practice or new marketing rhetoric? In: 4th International Conference on Human Aspects of Advanced Manufacturing and Hybrid Automation, MANCHESTER, ENGLAND, JUL 06-08, 1994. Published in: INTERNATIONAL JOURNAL OF HUMAN FACTORS IN MANUFACTURING, 6 (2). pp. 79-87. ISSN 1045-2699.

UNSPECIFIED (1998) An expert systems approach to simulating the human decision maker. In: 1998 Winter Simulation Conference on Simulation in the 21st-Century (WSC 98), WASHINGTON, D.C., DEC 13-16, 1998. Published in: 1998 WINTER SIMULATION CONFERENCE PROCEEDINGS, VOLS 1 AND 2 pp. 1541-1545. ISBN 0-7803-5133-9.

UNSPECIFIED (2005) The impact of the performance measurement systems in setting the 'direction' in the University of Warwick. In: 3rd International Workshop on Performance Measurement, Bergamo, ITALY, JUN 19, 2003. Published in: PRODUCTION PLANNING & CONTROL, 16 (2). pp. 189-198. doi:10.1080/09537280512331333084 ISSN 0953-7287.

UNSPECIFIED (1998) The integration of free-form design and manufacturing using free-form features DESIGN REUSE. In: Engineering Design Conference '98, BRUNEL UNIV, UXBRIDGE, ENGLAND, JUN 23-25, 1998. Published in: ENGINEERING DESIGN CONFERENCE '98 pp. 577-584. ISBN 1-86058-132-3.

UNSPECIFIED (1999) The management of risks within manufacturing organizations. In: International Symposium on Advanced Manufacturing Processes, Systems, and Technologies (AMPST 99), UNIV BRADFORD, BRADFORD, ENGLAND, MAR 30-31, 1999. Published in: ADVANCED MANUFACTURING PROCESSES, SYSTEMS, AND TECHNOLOGIES (AMPST 99) pp. 19-30. ISBN 1-86058-230-3.

UNSPECIFIED (2000) A management tool for innovation using systems thinking approach MANAGEMENT IN THE 21ST CENTURY. In: IEEE International Conference on Management of Innovation and Technology (ICMIT 2000), SINGAPORE, SINGAPORE, NOV 12-15, 2000. Published in: PROCEEDINGS OF THE 2000 IEEE INTERNATIONAL CONFERENCE ON MANAGEMENT OF INNOVATION AND TECHNOLOGY, VOLS 1 AND 2 pp. 378-383. ISBN 0-7803-6652-2.

UNSPECIFIED (1995) A new probe for friction measurements at very small scales. In: 10th Annual Meeting of the American-Society-for-Precision-Engineering, AUSTIN, TX, OCT 15-20, 1995. Published in: PROCEEDINGS OF THE TENTH ANNUAL MEETING - THE AMERICAN SOCIETY FOR PRECISION ENGINEERING pp. 350-353. ISBN 1-887706-14-3.

UNSPECIFIED (2003) A process for incorporating automotive shredder residue into thermoplastic mouldings. In: 9th International Manufacturing Conference, HONG KONG, PEOPLES R CHINA, AUG 16-17, 2000. Published in: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 139 (1-3). pp. 327-331. doi:10.1016/S0924-0136(03)00549-1 ISSN 0924-0136.

UNSPECIFIED (2001) A rapid design and manufacturing process of high-integrity components without final, three-dimensional models. In: 17th National Conference on Manufacturing Research, CARDIFF UNIV, CARDIFF, WALES, SEP 04-06, 2001. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XV pp. 249-254. ISBN 1-86058-325-3.

UNSPECIFIED (2003) A study of Japanese 5-S practice in UK industry. In: 1st International Conference on Manufacturing Research (ICMR2003) Incorporating with the 19th National Conference on Manufacturing Research (NCMR), UNIV STRATHCLYDE, GLASGOW, SCOTLAND, SEP 09-11, 2003. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XVII pp. 549-553. ISBN 1-86058-412-8.

UNSPECIFIED (2002) A unified error model for tolerance design, assembly and error compensation of 3-DOF parallel kinematic machines with parallelogram struts. In: 52nd General Assembly of CIRP, SAN SEBASTIAN, SPAIN, AUG 18-24, 2002. Published in: CIRP ANNALS-MANUFACTURING TECHNOLOGY, 51 (1). pp. 297-301.

UNSPECIFIED (1998) The use of ancient philosophies as global business management strategies under QFD methodology. In: 8th International Flexible Automation and Intelligent Manufacturing Conference, PORTLAND, OR, JUL 01-03, 1998. Published in: FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, 1998 pp. 153-164. ISBN 1-567-00118-1.

Abulrub, Abdul-Hadi G., Yin, Yanting and Williams, M. A. (Mark A.) (2012) Acceptance and management of innovation in SMEs: immersive 3D visualisation. In: International Conference on Leadership, Technology and Innovation Management 2011, Antalya, Turkey, Oct 21-23, 2011. Published in: Procedia - Social and Behavioral Sciences, 41 pp. 304-314. doi:10.1016/j.sbspro.2012.04.035 ISSN 1877-0428.

Ahmad, Bilal and Mohammed, Abdul Rehan Khan (2019) Manufacturing enhancement through reduction of cycle time using time-study statistical techniques in automotive industry. In: ICPS2019 IEEE International Conference on Industrial Cyber-Physical Systems, Taipei, Taiwan, 6-9 May 2019. Published in: Proceedings of ICPS 2019 ISBN 9781538685006. doi:10.1109/ICPHYS.2019.8780198

Alkan, Bugra, Vera, Daniel A., Ahmad, Mussawar, Ahmad, Bilal and Harrison, Robert (2016) A model for complexity assessment in manual assembly operations through predetermined motion time systems. In: 6th CIRP Conference on Assembly Technologies and Systems (CATS), Gothenburg, Sweden, 16-17 May 2016. Published in: Procedia CIRP, 44 pp. 429-434. ISSN 2212-8271.

Alkan, Bugra, Vera, Daniel A., Kaniappan Chinnathai, Malarvizhi and Harrison, Robert (2017) Assessing complexity of component-based control architectures used in modular automation systems. In: International Conference on Computer and Information Technology, Kusadasi, Turkey, 12-14 Apr 2017. Published in: International Journal of Computer and Electrical Engineering, 9 (1). pp. 393-402. doi:10.17706/IJCEE.2017.9.1.393-402 ISSN 1793-8163.

Assad, Fadi, Konstantinov, Sergey, Ahmad, Mus'ab, Rushforth, Emma and Harrison, Robert (2021) Utilising web-based digital twin to promote assembly line sustainability. In: 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems, Victoria, Canada, 10-12 May 2021. Published in: 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems (ICPS) ISBN 9781665430456. doi:10.1109/ICPS49255.2021.9468209

Assad, Fadi, Konstantinov, Sergey, Nureldin, H., Waseem, M, Rushforth, Emma, Ahmad, Bilal and Harrison, Robert (2021) Maintenance and digital health control in smart manufacturing based on condition monitoring. In: 8th CIRP Conference on Assembly Technologies and Systems, Virtual conference, 29 Sep - 01 Oct 2020. Published in: Procedia CIRP, 97 pp. 142-147. doi:10.1016/j.procir.2020.05.216 ISSN 2212-8271.

Assad, Fadi, Konstantinov, Sergey, Rushforth, Emma, Vera, Daniel A. and Harrison, Robert (2021) Virtual engineering in the support of sustainable assembly systems. In: 8th CIRP Conference on Assembly Technologies and Systems, Virtual conference, 29 Sep -01 Oct 2020. Published in: Procedia CIRP, 97 pp. 367-372. doi:10.1016/j.procir.2020.05.252 ISSN 2212-8271.

Britnell, David John, Tucker, N., Smith, G. F. and Wong, S. S. F. (2003) Bent pultrusion - a method for the manufacture of pultrudate with controlled variation in curvature. In: 9th International Manufacturing Conference, Hong Kong, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, Volume 138 (Special Issue). pp. 311-315. doi:10.1016/S0924-0136(03)00091-8 ISSN 0924-0136.

Butterfield, Joe, Ng, Irene C. L., Roy, Rajkumar and McEwan, William (2009) Enabling value co-production in the provision of support service engineering solutions using digital manufacturing methods. In: Winter Simulation Conference 2009, Austin, TX, U.S.A., 13-16 Dec 2009 . Published in: Proceedings of the Winter Simulation Conference 2009 pp. 3009-3022. doi:10.1109/WSC.2009.5429222 ISSN ISBN: 978-1-4244-5770-0.

Cain, Rebecca, Bitterman, N., Ludden, G., MacKrill, James B., Ozcan, E., Petermans, A. and Escobar-Tello, C. (2016) Introduction : Design for health, wellbeing and happiness. In: DRS 2016 International Conference : Future–Focused Thinking 50th Anniversary International Conference, Brighton, UK, 27–30 Jun 2016. Published in: Proceedings of DRS 2016 International Conference: Future–Focused Thinking 50th Anniversary International Conference Brighton, UK, 27–30 June 2016, 4 pp. 1434-1441. ISSN 2398-3132.

Cheng, Chuan (2021) Structured electrodes for improved performance of lithium-ion batteries. In: 2021 MRS Fall Meeting & Exhibition, Boston, Virtual, 6-8 Dec 2021

Chianese, Giovanni, Jabar, Sharhid, Franciosa, Pasquale, Ceglarek, Dariusz and Patalano, Stanislao (2022) A multi-physics CFD study on the part-to-part gap during remote laser welding of copper-to-steel battery tab connectors with beam wobbling. In: 12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 Sep 2022, Fürth, Germany. Published in: Procedia CIRP, 111 pp. 484-489. doi:10.1016/j.procir.2022.08.075 ISSN 2212-8271.

Das, Abhishek, Franciosa, Pasquale, Gerbino, Salvatore and Williams, D. K. (2016) Prediction of geometric errors of stamped sheet metal parts using deviation field decomposition. In: International Conference on Competitive Manufacturing (COMA), Stellenbosch, South Africa, 27-29 Jan 2016. Published in: Proceedings of International Conference on Competitive Manufacturing (COMA) pp. 109-114. ISBN 9780797216020.

Dashwood, R. J., Jackson, M., Klaumunzer, David, Fan, Zhongyun and Grimes, Roger (2008) The development of a new manufacturing route for superplastic magnesium alloy sheet exploiting twin roll casting. In: The 6th European Conference on Superplastic Forming (EuroSPF 2008), Carcassonne, France, Sep 3-5, 2008. Published in: EuroSPF 2008, Carcassonne : France (2008) pp. 1-7.

Day, Steven, Masi, Donato, Godsell, Janet and Zhang, Wanrong (2018) Researching product-service systems for consumers : insights from a systematic literature review. In: 25th Annual EurOMA (European Operations Management Association) Conference, Budapest, Hungary, 24-26 Jun 2018. Published in: Proceedings of the 25th Annual EurOMA Conference, Budapest, Hungary

Desai, Rinkal (2021) Delivering degree apprenticeships during the pandemic - remote learning, end-point assessments, and what can be learned going forward. In: Westminster Higher Education Forum, London, 06 May 2021. Published in: Degree apprenticeships in England - next steps for awareness and access, quality and standards, inspection, and contribution to economic recovery

Desai, Rinkal (2019) Impact of Degree Apprenticeships to organisations and benefits to attract talent to UK manufacturing. In: Westminster Business Policy Forum, London, 12 Dec 2019. Published in: Key issues for UK high value manufacturing - innovation and investment, skills and partnerships, and the future for international trade, December 2019 pp. 43-46.

Dhara, Sisir, Taylor, S., Figiel, Ł., Shollock, Barbara A. and Hazra, S. K. (2020) A novel experimental set-up for in-situ microstructural characterization during continuous strain path change. In: International Deep-Drawing Research Group (IDDRG 2020), Seoul, South Korea, 26-30 Oct 2020. Published in: IOP Conference Series: Materials Science and Engineering, 967 doi:10.1088/1757-899X/967/1/012007

Dhara, Sisir, Taylor, Scott, Figiel, Lukasz, Hughes, Darren J., Shollock, Barbara A. and Hazra, Sumit (2021) In-situ study of strain and texture evolution during continuous strain path change. In: ESAFORM 2021 : 24th International Conference on Material Forming, Liège, Belgium, 14-16 Apr 2021 doi:10.25518/esaform21.2168

Du, Liang, Tan, Jingang, Xue, Xiangyang, Chen, Lili, Wen, Hongkai, Feng, Jianfeng, Li, Jiamao and Zhang, Xiaolin (2020) 3DCFS : Fast and robust joint 3D semantic-instance segmentation via coupled feature selection. In: IEEE International Conference on Robotics and Automaion, Paris, France, 31 May - 4 Jun 2020. Published in: 2020 IEEE International Conference on Robotics and Automation (ICRA) ISBN 9781728173962. doi:10.1109/ICRA40945.2020.9197242 ISSN 1050-4729.

Fan, X., Masters, Iain, Roy, Rajat and Williams, D. K. (2008) Prediction of sheet metal assembly dimensional variation. In: 2nd CIRP Conference on Assembly Technologies and Sytems, Toronto, Ontario, Canada, Sep 21-23, 2008. Published in: Proceedings of the 2nd CIRP Conference on Assembly Technologies and Sytems

Faraji Niri, Mona, Liu, Kailong, Apachitei, Geanina, Roman Ramirez, Luis, Lain, Michael J., Widanage, Widanalage Dhammika and Marco, James (2021) Machine-learning for Li-Ion battery capacity prediction in manufacturing process. In: 240th ECS Meeting, Virtual conference, 10-14 Oct 2021. Published in: ECS Transactions (ECST)

Faraji Niri, Mona, Liu, Kailong, Apachitei, Geanina, Roman Ramirez, Luis, Widanage, Widanalage Dhammika and Marco, James (2021) Data mining for quality prediction of battery in manufacturing process : Cathode coating process. In: International Conference on Applied Energy 2020, Bangkok, Thailand; Virtual, 1-10 Dec 2020. Published in: Proceedings of 12th International Conference on Applied Energy, 2020, 11 (3). ISBN 9789198673821.

Ferri, Carlo, Chinnathai, Malarvizhi Kaniappan, Titmarsh, Rohin and Abdelaziz, Hala (2022) Image segmentation of micro-TIG battery welds. In: 2022 27th International Conference on Automation and Computing (ICAC), Bristol, 1-3 Sep 2022. Published in: 2022 27th International Conference on Automation and Computing (ICAC) pp. 1-6. ISBN 9781665498074. doi:10.1109/ICAC55051.2022.9911107

Franciosa, Pasquale, Gerbino, Salvatore, Stella, Ettore, Berri, Luigi, Gramegna, Nicola, Gallo, Nicola and Martorelli, Massimo (2022) A digital twin approach for smart assembly of aircraft skin panels with mechanical fasteners. In: International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Ischia, Italy, 1-3 Jun 2022. Published in: Advances on Mechanics, Design Engineering and Manufacturing IV. JCM 2022 pp. 851-861. ISBN 9783031159275. doi:10.1007/978-3-031-15928-2_74 ISSN 2195-4356.

Goodship, Vannessa, Middleton, Bethany J., Fiamegkou, Eleni and Cherrington, Ruth (2017) Building in multifunctionality in plastic components : complexity, cost and sustainability. In: 15th International Conference of Manufacturing Research, Greenwich, London, UK, 4-7 Sep 2017. Published in: Advances in Manufacturing Technology XXXI, 6 pp. 377-382. ISBN 9781614997917. doi:10.3233/978-1-61499-792-4-377

Gupta, Aniruddha, Ascroft, Helen and Barnes, Stuart (2016) Effect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP). In: 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, 31 May - 2 Jun 2016. Published in: Procedia CIRP, 46 pp. 619-622. doi:10.1016/j.procir.2016.04.026 ISSN 2212-8271.

Haq, Izhar Ul, Masood, Tariq, Ahmad, Bilal, Harrison, Robert, Raza, Bagar and Monfared, Radmehr P. (2011) Product to process lifecycle management in assembly automation systems. In: 7th International Conference on Digital Enterprise Technology, Athens, Greece, 28-30 Sep 2011. Published in: Proceedings of DET2011 pp. 1-11.

Hazra, S. K. , Williams, D. K., Roy, Rajat, Aylmore, R., Allen, M. and Hollingdale, D. (2011) Predicting the occurrence of cosmetic defects in automotive skin panels. In: The 14th International ESAFORM Conference on Material Forming - ESAFORM 2011, Queen's University Belfast, UK, Apr 27-29, 2011. Published in: AIP Conference Proceedings, Vol.1353 pp. 253-257. doi:10.1063/1.3589524 ISSN 0094-243X.

Hazra, S. K. , Williams, D. K., Roy, Rajat, Aylmore, R. and Smith, A. (2009) Forming parameter sensitivity. In: International Deep-Drawing Research Group Annual Conference '09, Golden, CO, U.S.A., Jun 1-3, 2009. Published in: Proceedings of the International Deep-Drawing Research Group Annual Conference '09 pp. 295-306.

He, Xiaocong, Pearson, Ian T. and Young, Ken (2006) Free vibration characteristics of SPR joints. In: 8th Biennial Conference on Engineering Systems Design and Analysis, Turin, ITALY, JUL 04-07, 2006. Published in: Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 3 pp. 159-167. ISBN 978-0-7918-4250-8.

Hicks, Stephen J., Ciutina, Adrian and Odenbreit, Christoph (2020) Development new push test Eurocode 4. In: 8th International Conference on Composite Construction in Steel and Concrete (CCVIII), Spring Creek Ranch, Jackson, Wyoming, 30 Jul - 02 Aug 2017. Published in: Proceedings of the Eighth International Conference on Composite Construction in Steel and Concrete pp. 62-73. ISBN 9781564240620.

Hunt, Ben, Muruganandam, Anburaja, Li, Dezhi and Franciosa, Pasquale (2023) Weldability study of round aluminium magnet wires for lightweight low-cost traction electric motor applications. In: 2022 12th International Electric Drives Production Conference (EDPC), Regensburg, Germany, 29-30 Nov 2022 ISBN 9781665454049. doi:10.1109/edpc56367.2022.10019750 ISSN 2832-6385.

Irvine, Patrick, Zhang, Xizhe, Khastgir, Siddartha, Schwalb, Edward and Jennings, Paul. A. (2022) A two-level abstraction ODD definition language : Part 1*. In: IEEE Systems, Man and Cybernetics Society (SMC), Virtual conference, 17-20 Oct 2021. Published in: 2021 IEEE International Conference on Systems, Man, and Cybernetics (SMC) ISBN 9781665442077. doi:10.1109/SMC52423.2021.9658751

Jiang, X. and Whitehouse, D. J. (David J.) (2006) Miniaturized optical measurement methods for surface nanometrology. In: 56th General Assembly of CIRP, Kobe, JAPAN, AUG 20-26, 2006. Published in: CIRP ANNALS-MANUFACTURING TECHNOLOGY, 55 (1). pp. 577-580. doi:10.1016/S0007-8506(07)60486-7 ISSN 0007-8506.

Kaniappan Chinnathai, Malarvizhi, Al-Mowafy, Zeinab, Alkan, Bugra, Vera, Daniel A. and Harrison, Robert (2019) A framework for pilot line scale-up using digital manufacturing. In: 52nd CIRP conference on manufacturing systems, Slovenia, 12-14 Jun 2019. Published in: Procedia CIRP, 81 pp. 962-967. doi:10.1016/j.procir.2019.03.235 ISSN 2212-8271.

Kaniappan Chinnathai, Malarvizhi, Alkan, Bugra and Harrison, Robert (2017) Convertibility evaluation of automated assembly system designs for high variety production. In: 27th CIRP Design 2017, Cranfield University, 10-12 May 2017. Published in: Procedia CIRP, 60 pp. 74-79. ISSN 2212-8271.

Kirwan, Kerry (2010) High value innovation – credit cards to racing cars. In: PDM 2010 Exhibition and Conference, Telford International Centre, Telford, U.K., May 18-20, 2010

Kirwan, Kerry (2011) Lean, mean and green. In: 19th Bioenvironmental Polymer Society Annual Meeting, Vienna, Austria, 28-30 Sep 2011. Published in: Abstracts of Talks from the 19th Bioenvironmental Polymer Society Annual Meeting (KL-12).

Kirwan, Kerry and Coles, Stuart R. (2011) Wealth out of waste. In: 4th International Seminar on Biodegradable Polymers, Valencia, Spain, Mar 7-8, 2011

Kirwan, Kerry, Coles, Stuart R., Clark, Andrew J., Pink, David, Barker, Guy C., Jacobs, Daniel K. and Makenji, Kylash (2008) A novel approach to developing crop-based products. In: 3rd International Seminar on Biodegradable Polymers, Valencia, Spain, Mar 3-4, 2008

Kirwan, Kerry and Maggs, Steven J. (2011) Lean, mean and green. In: 4th International Seminar on Biodegradable Polymers, Valencia, Spain, Mar 7-8, 2011

Kirwan, Kerry, Maggs, Steven J. and Wood, Benjamin M. (2009) Motorsport as a 'vehicle' for technology transfer and public engagement with sustainable materials – a case study. In: 5th International Conference on Environmental, Cultural, Economic and Social Sustainability, University of Technology, Mauritius, Jan 5-7, 2009. Published in: Proceedings of the 5th International Conference on Environmental, Cultural, Economic and Social Sustainability

Kohr, Dominik, Ahmad, Mussawar, Alkan, Bugra, Kaniappan Chinnathai, Malarvizhi, Budde, Lukas, Vera, Daniel, Friedli, Thomas and Harrison, Robert (2019) Proposing a holistic framework for the assessment and management of manufacturing complexity through data-centric and human-centric approaches. In: International Conference on Complexity, Future Information Systems and Risk, Funchal, Madeira, Portugal, 20-21 Mar 2018. Published in: Proceedings of the 3rd International Conference on Complexity, Future Information Systems and Risk - Volume 1: COMPLEXIS, 86-93, 2018, Funchal, Madeira, Portugal, 1 pp. 86-93. ISBN 9789897582974. doi:10.5220/0006692000860093

Kommuri, Naga Kavitha, Allen, A. J., McGordon, Andrew and Dinh, Quang Truong (2019) Effect of system parameters on load levelling strategy for a plugin parallel hybrid two-wheeler. In: IEEE-2019 Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monaco, 8-10 May 2019 (Submitted)

Konstantinov, Sergey, Assad, Fadi, Azam, Wajid, Vera, Daniel A., Ahmad, Bilal and Harrison, Robert (2021) Developing web-based digital twin of assembly lines for industrial cyber-physical systems. In: 4th IEEE International Conference on Industrial Cyber-Physical Systems, Victoria, Canada, 10-12 May 2021. Published in: 2021 4th IEEE International Conference on Industrial Cyber-Physical Systems (ICPS) ISBN 9781728162072. doi:10.1109/ICPS49255.2021.9468227

Kourra, Nadia, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Metrological investigation of radiation filtration in x-ray computed tomography. In: Instrumentation and Measurement Technology Conference (I2MTC), Torino, Italy, Italy, 22-25 May 2017. Published in: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), pp. 1-6. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969797

Leigh, Simon J. (2016) Polymer composites for 3D printing of functional sensors and transducers. In: 2016 IEEE Sensors, Orlando, 30 Oct-3 Nov 2016. Published in: IEEE Sensors pp. 1-3. ISBN 9781479982882. doi:10.1109/ICSENS.2016.7808629 ISSN 1530-437X.

Li, Boda, Baris, Gabriele, Chan, Pak Hung, Rahman, Anima and Donzella, Valentina (2022) Testing ground-truth errors in an automotive dataset for a DNN-based object detector. In: 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME), Maldives, 16-18 Nov 2022. Published in: 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) ISBN 9781665470957. doi:10.1109/ICECCME55909.2022.9988623

Lin, Xufeng and Li, Chang-Tsun (2016) Refining PRNU-based detection of image forgeries. In: IEEE Digital Media & Academic Forum, Santorini, Greece, 4-6 Jul 2016 ISBN 9781509010004. doi:10.1109/DMIAF.2016.7574937

Lu, Dawei (1998) Reinvestigation of Taguchi Loss Function and tolerance design using fuzzy approximation. In: EUROFIT ’98 , Aachen, Germany , September. Published in: Proceedings of EUROFIT ’98, Vol.3

Lu, Dawei (1990) The role of machine vision in the development of an intelligent robot assembly system. In: 23rd International Symposium of Automotive Technology and Automation (ISATA), Vienna, Austria, 3rd-7th December 1990. Published in: Proceedings of the 23rd International Symposium of Automotive Technology and Automation (ISATA) pp. 99-108. (Unpublished)

Maropoulos, P. G. and Ceglarek, Darek (2010) Design verification and validation in product lifecycle. In: 60th General Assembly of CIRP, Pisa, Italy, 22-28 Aug 2010. Published in: CIRP Annals - Manufacturing Technology, Vol.59 (No.2). pp. 740-759. doi:10.1016/j.cirp.2010.05.005 ISSN 0007-8506.

Martin, C., Keast, John and James-Moore, Mike (2010) The development of a tool and methodology for identifying and classifying waste within new product development. In: International Conference on Advances in Production Management Systems (APMS 2010), Cernobbio, Lake Como, Italy, Sep 24-26, 2010. Published in: APMS 2010 International Conference Advances in Production Management Systems Book of Abstracts p. 51. ISSN 1868-4238.

Masters, Iain, Williams, D. K. and Roy, Rajat (2009) Modelling springback. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR09) pp. 360-365.

Mohammed, Abdul Rehan Khan, Zhang, Jiayi, Silverstone, Benjamin and Bilal, Ahmad (2023) Literature survey on manufacturing shop floor performance measurements : frameworks, models, and categorizations. In: 2023 IEEE 6th International Conference on Industrial Cyber-Physical Systems (ICPS), Wuhan, China, 08-11 May 2023 doi:10.1109/ICPS58381.2023.10128010

Niedderer, K., Ludden, G., Cain, Rebecca, Morris, A. G. (Alan George) and Freimane, A. (2016) Introduction : Design for behaviour change. In: DRS 2016 International Conference : Future–Focused Thinking 50th Anniversary International Conference, Brighton, UK, 27–30 Jun 2016. Published in: Future Focussed Thinking - DRS International Conference 20228, 27 - 30 June, Brighton, United Kingdom, 4 pp. 1271-1275. doi:10.21606/drs.2016.620 ISSN 2398-3132.

Ozden, Mucahit, Ignatius, Joshua, Masi, Donato and Agca, Ahmet Onur (2019) Purchase intention towards remanufactured products : a systematic literature review. In: EurOMA 2019, Helsinki, Finland, 17-19 Jun 2019 (Unpublished)

Pamarthi, Venkat Vivek, Sun, Tianzhu, Das, Abhishek and Franciosa, Pasquale (2022) Strain-based investigation on solidification crack susceptibility of 6005 aluminium using adjustable ring mode (ARM) laser welding. In: 12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 Sep 2022, Fürth, Germany. Published in: Procedia CIRP, 111 pp. 425-430. doi:10.1016/j.procir.2022.08.180 ISSN 2212-8271.

Pickardt, Christoph W., Branke, Jürgen, Hildebrandt, Torsten, Heger, Jens and Scholz-Reiter, Bernd (2010) Generating dispatching rules for semiconductor manufacturing to minimize weighted tardiness. In: 2010 Winter Simulation Conference, Baltimore, MD, 05-08 Dec 2010 . Published in: Proceedings of the 2010 Winter Simulation Conference (WSC) pp. 2504-2515. doi:10.1109/WSC.2010.5678946 ISSN 0891-7736.

Riemer, O (1999) The characterisation of small water droplets for assessing surface cleaning. In: 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology, Bremen, GERMANY, MAY 31-JUN 04, 1999. Published in: PRECISION ENGINEERING, NANOTECHNOLOGY, VOL. 2 pp. 399-402. ISBN *************.

Riemer, O (1999) The repeatability of contact-gauge probes against engineering surfaces. In: 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology, Bremen, GERMANY, MAY 31-JUN 04, 1999. Published in: PRECISION ENGINEERING, NANOTECHNOLOGY, VOL. 2 pp. 403-406. ISBN *************.

Roman Ramirez, Luis, Apachitei, Geanina, Faraji Niri, Mona, Lain, Michael J., Widanage, Widanalage Dhammika and Marco, James (2021) Study of the cathode coating-drying manufacturing process by design of experiments. In: International Battery Production Conference IBPC 2021, Braunschweig, Germany, 1-3 Nov 2021

Roy, Debaleena, Guha, Tanaya and Sanchez Silva, Victor (2022) Graph-based transform based on 3D convolutional neural network for intra-prediction of imaging data. In: 2022 Data Compression Conference (DCC), Snowbird, Utah, 22-25 Mar 2022. Published in: 2022 Data Compression Conference (DCC) doi:10.1109/DCC52660.2022.00029 ISSN 2375-0359.

Russo, Mario Brandon, Greco, Alessandro, Gerbino, Salvatore and Franciosa, Pasquale (2022) Towards real-time physics-based variation simulation of assembly systems with compliant sheet-metal parts based on reduced-order models. In: International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Ischia, Italy, 1-3 Jun 2022. Published in: Advances on Mechanics, Design Engineering and Manufacturing IV. JCM 2022 pp. 546-558. ISBN 9783031159275. doi:10.1007/978-3-031-15928-2_48 ISSN 2195-4356.

Schwalb, Edward, Irvine, Patrick, Zhang, Xizhe, Khastgir, Siddartha and Jennings, Paul. A. (2022) A two-level abstraction ODD definition language : Part 2*. In: IEEE Systems, Man and Cybernetics Society (SMC), Virtual conference, 17-20 Oct 2021. Published in: 2021 IEEE International Conference on Systems, Man, and Cybernetics (SMC) ISBN 9781665442077. doi:10.1109/SMC52423.2021.9658812

Shukla, Nagesh, Keast, John, Lahiri, Sudakshina and Ceglarek, Darek (2009) Role activity diagram-based workflow modelling of imaging service delivery process in radiology. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09) pp. 283-291.

Silva, Francois, Achard, Jocelyn, Bonnin, X., Brinza, O., Michau, Armelle, Secroun, Aurelia, De Corte, Katrien, Felton, S. (Solveig), Newton, Mark E. and Gicquel, Alix (2008) Single crystal CVD diamond growth strategy by the use of a 3D geometrical model : Growth on (113) oriented substrates. In: 18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, Berlin, Germany, Sep 09-14, 2007. Published in: Diamond and Related Materials, Volume 17 (Numbers 7-10, Special issue SI). pp. 1067-1075. doi:10.1016/j.diamond.2008.01.006 ISSN 0925-9635.

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Darek (2021) Object shape error response using Bayesian 3D convolutional neural networks for assembly systems with compliant parts. In: 18th IEEE International Conference on Industrial Informatics (INDIN), Coventry, 20-23 Jul 2020. Published in: 2020 IEEE 18th International Conference on Industrial Informatics (INDIN) pp. 104-109. ISBN 9781728149646. doi:10.1109/INDIN45582.2020.9442245 ISSN 2378-363X.

Sokolov, Mikhail, Franciosa, Pasquale, Al Botros, Rehab and Ceglarek, Dariusz (2020) Keyhole mapping to enable closed-loop weld penetration depth control for remote laser welding of aluminium components using optical coherence tomography. In: International Congress on Applications of Lasers & Electro–Optics (ICALEO) Conference, Orlando, FL, USA, 7-10 Oct 2019. Published in: Journal of Laser Applications, 32 (3). doi:10.2351/7.0000086 ISSN 1042-346X.

Stalker, I. D., Desai, R. K. and Studd, R. (2020) Employability and sustainability in STEM : educating the leaders of the future. In: STEM Conference 2020, Manchester, UK, 29-30 Jan 2020

Stanger, Jonathan, Tucker, Nick and Coles, Stuart R. (2008) Green industrialization for developing nations. In: 3rd International Conference on Sustainability Engineering and Science , Auckland, New Zealand, Dec 9-12, 2008. Published in: Proceedings of the 3rd International Conference on Sustainability Engineering and Science

Stanton, M., Bhattacharya, R., Dargue, I., Aylmore, R. and Williams, G. (2011) Hole Expansion of Aluminum Alloys for the Automotive Industry. In: The 14th International ESAFORM Conference on Material Forming - ESAFORM 2011, Queen's University Belfast, UK, Apr 27-29, 2011. Published in: AIP Conference Proceedings, Vol.1353 pp. 1488-1493. doi:10.1063/1.3589727 ISSN 0094-243X.

Titmarsh, Rohin, Assad, Fadi and Harrison, Robert (2020) Contributions of lean six sigma to sustainable manufacturing requirements : an Industry 4.0 perspective. In: 27th CIRP Life Cycle Engineering Conference, 13-15 May 2020. Published in: Procedia CIRP, 90 pp. 589-593. doi:10.1016/j.procir.2020.02.044 ISSN 2212-8271.

Titmarsh, Rohin, Assad, Fadi and Harrison, Robert (2022) Energy saving in lithium-ion battery manufacturing through the implementation of predictive maintenance. In: 5th International Conference on Computing, Electronics & Communications Engineering (iCCECE '22), University of Essex, Southend Campus, UK, 17-18 Aug 2022 ISBN 9781665489812. doi:10.1109/iCCECE55162.2022.9875079

Wang, Haonan, Xu, Tianhua, Wang, Ziyihui, Jiang, Junfeng, Liu, Tiegen, Peng, Gang-Ding, Yang, Minghong and Fan, Xinyu (2022) Detection of streptavidin using liquid crystal based whispering gallery mode microbubble. In: SPIE/COS Photonics Asia 2022, Online, 5-11 Dec 2022. Published in: Proceedings of SPIE ; Advanced Sensor Systems and Applications XII, 12321 doi:10.1117/12.2637884 ISSN 0277-786X.

Wang, Ziyihui, Zhang, Yifan, Xu, Tianhua, Yuan, Zhiyi, Ding, Jiazheng, Chen, Yu-Cheng and Tiegen, Liu (2020) Electrostatic-responsive microdroplet lasers for ultrasensitive molecular detection. In: SPIE/COS Photonics Asia, Online, 11-16 Oct. Published in: Proceedings of SPIE - International Society for Optical Engineering, 11554 doi:10.1117/12.2574262 ISSN 0277-786X.

Warwood, S. J. and Tennant, C. (2002) A TQM survey in the UK - a study of the factors involved in the successful implementation of total quality management in UK industry. In: 18th National Conference on Manufacturing Research, Leeds Metropolitan University, Leeds, England, 10-12 Sep 2002. Published in: Advances in Manufacturing Technology XVI pp. 565-570. ISBN 1860583784.

Williams, D. K., Roy, Rajat, Low, Margaret and Evans, R. (2008) Complexity management of UAV systems. In: 23rd International Conference on Unmanned Air Vehicle Systems 2008, Bristol, U.K., Apr 7-9, 2008. Published in: Proceedings of the 23rd International Conference on Unmanned Air Vehicle Systems 2008, Vol.1 pp. 584-624. ISSN ISBN: 978-1-61782-271-1 .

Wimpenny, D. I., Bryden, B. and Pashby, I. R. (2003) Rapid laminated tooling. In: 9th International Manufacturing Conference, Hong Kong, China, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, 138 (1-3). pp. 214-218. doi:10.1016/S0924-0136(03)00074-8 ISSN 0924-0136.

Yeo, Zhiquan, Choong Low, Jonathan Sze, Loong Tan, Daren Zong, Chung, Si Ying, Tjandra, Tobias Bestari and Ignatius, Joshua (2019) A collaboration platform for enabling industrial symbiosis : towards creating a self-learning waste-to-resource database for recommending industrial symbiosis transactions using text analytics. In: 26th CIRP Conference on Life Cycle Engineering, Purdue University, West Lafayette, IN, May 7-9 2019. Published in: Procedia CIRP, 80 pp. 643-648. doi:10.1016/j.procir.2019.01.015 ISSN 2212-8271.

Yeo, Zhiquan, Masi, Donato, Barnes, Stuart, Ng, Yen Ting, Tan, Puay Siew and Low, Sze Choong Jonathan (2018) How digitalisation can enable industrial symbiosis practices : a case study. In: 5th International EurOMA Sustainable Operations and Supply Chains Forum, Germany, 5-6 Mar 2018 (Unpublished)

Zhang, Jiayi, Ahmad, Bilal, Vera, Daniel A. and Harrison, Robert (2018) Automatic data representation analysis for reconfigurable systems integration. In: IEEE 16th International Conference on Industrial Informatics (INDIN), Porto, Portugal, 18-20 Jul 2018. Published in: 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) pp. 1033-1038. doi:10.1109/INDIN.2018.8472034

Zhang, Jiayi, Ahmad, Bilal, Vera, Daniel A. and Harrison, Robert (2017) Ontology based semantic-predictive model for reconfigurable automation systems. In: IEEE 14th International Conference on Industrial Informatics, Poitiers, France, 19-21 Jul 2016 pp. 1094-1099. doi:10.1109/INDIN.2016.7819328

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2016) Development of a direct feed fused deposition modelling technology for multi-material manufacturing. In: 19th International Conference on Material Forming – ESAFORM 2016, Nantes, France, 26-29 Apr 2016. Published in: ESAFORM 2016 : Proceedings of the 19th international ESAFORM conference on material forming 190004 . ISBN 9780735414273.

Zidan, Jasmine, Alluhaibi, Osama, Adegoke, E. I., Kampert, Erik, Higgins, Matthew D. and Ford, Col R. (2020) 3D mapping methods and consistency checks to exclude GNSS multipath/NLOS effects. In: 2020 International Conference on UK-China Emerging Technologies (UCET), Glasgow, UK, 20-21 Aug 2020 ISBN 9781728194882. doi:10.1109/UCET51115.2020.9205423

Working or Discussion Paper

Green, Maxwell, Davies, Philip and Ng, Irene C. L. (2016) Two strands of servitization : a thematic analysis of traditional and customer co-created servitization and future research directions. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (04/16). (Unpublished)

Lemire, Beverly and Riello, Giorgio (2006) East and west: textiles and fashion in Eurasia in the early modern period. Working Paper. London: Department of Economic History, London School of Economics and Political Science. Global Economic History Network (GEHN) (22).

Book

Riello, Giorgio and Parthasarathi, Prasannan, eds. (2009) The spinning world : a global history of cotton textiles, 1200-1850. Pasold studies in textile history (No.16). Oxford ; New York: Oxford University Press. ISBN 9780199559442

Journal Item

UNSPECIFIED (1995) ASSESSING MARGINAL IMPACT OF INVESTMENT ON THE PERFORMANCE OF ORGANIZATIONAL UNITS - REPLY. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 39 (1-2). p. 164.

UNSPECIFIED (1996) Annotated bibliography on computer-aided process planning. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 12 (5). pp. 309-329.

UNSPECIFIED (1999) Cutting temperature: prediction and measurement methods - a review. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 88 (1-3). pp. 195-202.

UNSPECIFIED (1984) A HISTORY OF THE DOWTY MARSHALLING YARD WAGON CONTROL-SYSTEM - DISCUSSION. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 198 (10). p. 207.

UNSPECIFIED (1998) The International Warwick Manufacturing Group. ASSEMBLY AUTOMATION, 18 (2). p. 102.

UNSPECIFIED (1990) MACHINING OF TITANIUM AND ITS ALLOYS - A REVIEW. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 204 (1). pp. 53-60.

UNSPECIFIED (1994) VARIOUS METHODS OF MACHINING ADVANCED CERAMIC MATERIALS - REVIEW. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 42 (4). pp. 377-390.

Li, Dezhi, Slater, Carl, Cai, Huisheng, Hou, Xiaonan, Li, Yongbing and Wang, Qudong (2023) Joining technologies for aluminium castings : a review. Coatings, 13 (5). 958. doi:10.3390/coatings13050958

Li, Z., Izquierdo, L. E., Kokkolaras, M., Hu, S. J. and Papalambros, Panos Y. (2008) Multiobjective optimization for integrated tolerance allocation and fixture layout design in multistation assembly. Journal of Manufacturing Science and Engineering, Volume 130 (Number 4). 0445011-0445016. doi:10.1115/1.2951951

Sackett, P. J., Al-Gaylani, M. F., Tiwari, A. and Williams, D. K. (2006) A review of data visualization: opportunities in manufacturing sequence management. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 19 (7). pp. 689-704. doi:10.1080/09511920500504578

Taylor, Celia A. (2016) Cyclical quality assurance of examinations is critical but causality needs to be attributed carefully. Education for Primary Care, 27 (4). pp. 304-305. doi:10.1080/14739879.2016.1196394

Report

Alexander, Jennifer (2012) Kirby Hall, Northants : the evidence of the masons' marks. London UK: English Heritage. (Unpublished)

Beynon, Meurig, Cartwright, Richard, Cartwright, Alan and Yung, Yun Pui (1996) Abstract geometry for design in an empirical modelling context. University of Warwick. Department of Computer Science. (Department of Computer Science research report). (Unpublished)

Hall, Russell, Zhang, Wanrong and Li, Zushu (2021) Domestic scrap steel recycling – economic, environmental and social opportunities (EV0490). UK: DEFRA Science and Research projects.

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Tactility, craftsmanship and the NPI process. SAE International. (SAE Technical Papers).

Thesis

Ab Rahman, Nur Alifah Binti (2019) Ferromagnetic MnSb growth on graphene. PhD thesis, University of Warwick.

Abbas, Syeda (2021) Promoting interfacial interactions between model polymers and graphene oxide. PhD thesis, University of Warwick.

Abd Halim, Nor Farah Huda Binti (2018) An experimental investigation of ultrasonic assisted milling (UAM) of carbon fibre reinforced polymer (CFRP) and the effect of machining on the BMI 5250-4 matrix resin. PhD thesis, University of Warwick.

Ahmad, Mus'ab (2017) A proactive framework within a virtual engineering environment for assembly system energy optimisation. PhD thesis, University of Warwick.

Ahmad, Mussawar (2017) An ontology-based approach for integrating engineering workflows for industrial assembly automation systems. PhD thesis, University of Warwick.

Al-Meshaiei, Eisa Abdullah Eisa S. (1999) An expert system for material handling equipment selection. PhD thesis, University of Warwick.

Al-Nabulsi, Zeina (2021) Characterization of steel components printed using WAAM technology. PhD thesis, University of Warwick.

Alifantis, Thanos (2006) Knowledge based improvement : simulation and artificial intelligence for understanding and improving decision making in an operations system. PhD thesis, University of Warwick.

Astolfi, Lorenzo (2021) Ultrasonic metamaterials for use in water. PhD thesis, University of Warwick.

Badhan, Jivan Singh (2022) Natural porphyrins and synthetic analogues as photoredox catalysts in visible light catalysed 3D printing. PhD thesis, University of Warwick.

Baharin, Shamsuddin (1994) Knowledge-based automatic tolerance analysis system. PhD thesis, University of Warwick.

Bal, Darbara Jay (1995) Materials selection using knowledge-based techniques. PhD thesis, University of Warwick.

Bandi, Bharath (2022) Influence of high temperature mechanisms on microstructural evolution of Dual Phase steels. PhD thesis, University of Warwick.

Bañuelas, Ricardo (2005) Six Sigma vs. Design for Six Sigma: selection of the requisite Six Sigma approach using multi-criteria decision analysis: innovation report. EngD thesis, University of Warwick.

Beaumont, Richard Adrian (2012) Determining the effect of strain rate on the fracture of sheet steel. PhD thesis, University of Warwick.

Betzou, Antonia P. (2021) Thermophysical properties of steels under microgravity conditions. PhD thesis, University of Warwick.

Bishop, Elizabeth G. (2022) Techniques and technologies for large-scale additive manufacturing. PhD thesis, University of Warwick.

Bloomer, Chris (2022) Pixelated CVD diamond synchrotron radiation monitor with graphitic electrodes. PhD thesis, University of Warwick.

Brennan, Robert James (2020) How do new ventures successfully create an ecosystem to capture value from a disruptive technology? DBA thesis, University of Warwick.

Brown, Daniel (2016) Investigating the biosynthesis of natural rubber through the characterisation of rubber associated proteins. PhD thesis, University of Warwick.

Cant, Edward J. (2017) Development of novel functional and degradable materials for use in microstereolithography. PhD thesis, University of Warwick.

Carberry, Jonathan Michael (2021) Reducing the acquisition cost of the next fighter jet using automation. EngD thesis, University of Warwick.

Carpinetti, Luiz C. R. (1993) Methods for computer aided inspection of geometric tolerances. PhD thesis, University of Warwick.

Carter, David A. W. (1985) Electrochemical and electron-microscopical studies of anodically corroded silver-gold alloys. PhD thesis, University of Warwick.

Catt, Philip James (2019) A tailorable framework of practices for maintenance delivery. PhD thesis, University of Warwick.

Chang, An-Yuan (1999) An attribute approach to the measurement of manufacturing system flexibility. PhD thesis, University of Warwick.

Cheung, Yen Ping (1991) Artificial intelligence techniques for assembly process planning. PhD thesis, University of Warwick.

Cooke, Ryan A. (2020) Modelling and characterisation of distributed hardware acceleration. PhD thesis, University of Warwick.

Cox, Sophie C. (2013) Synthesis and 3D printing of hydroxyapatite scaffolds for applications in bone tissue engineering. PhD thesis, University of Warwick.

Das, Abhishek (2016) Shape variation modelling, analysis and statistical control for assembly system with compliant parts. PhD thesis, University of Warwick.

Davies, Philip Michael (2018) An investigation into modularity-in-context and 3D printing for resource integration: an operations management perspective. PhD thesis, University of Warwick.

Davis, Martin (2017) Effective vehicle attribute delivery at Jaguar Land Rover : innovation report. EngD thesis, University of Warwick.

Dessens, Luis Felipe Romero (2003) Strong component-based methodology for facility layout design. PhD thesis, University of Warwick.

Ellingford, Christopher David (2020) Electroactive self-healing elastomers and nanocomposites for actuation and energy harvesting. EngD thesis, University of Warwick.

Ellis, Christopher Roland (2019) Additive powder manufacture of new aluminium alloys. PhD thesis, University of Warwick.

Ezhaya, James C. (2022) Problem-solving severe events : time for a new approach. DBA thesis, University of Warwick.

Ferrie, John (1998) The development of process models : executive summary. PhD thesis, University of Warwick.

Goodall, William Richard (1993) Scheduling and control in the batch process industry using hybrid knowledge based simulation. PhD thesis, University of Warwick.

Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.

Greenspan, Anna (2000) Capitalism's transcendental time machine. PhD thesis, University of Warwick.

Griffiths, Elliott R. (2022) Methods, strategies and applications for direct hybrid additive manufacture of embedded sensors. PhD thesis, University of Warwick.

Grinsted, Susan (1990) The use of simulation to investigate heuristics for alternate routing in manufacturing systems. PhD thesis, University of Warwick.

Hajarnavis, Vivek (2006) An evaluation and comparison of PLC programming techniques : innovation report. EngD thesis, University of Warwick.

Hatami Khosrowshahi, S. R. (1991) A non-deterministic approach to dynamic layout planning of flexible manufacturing systems. PhD thesis, University of Warwick.

Hayes, Jonathan (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.

Heydari, Farhad (1990) Mechanisms of sand flow and compaction in core-blowing. EngD thesis, University of Warwick.

Howse, D. S. (2002) Improved productivity in fusion welding : executive summary. EngD thesis, University of Warwick.

Huang, You Sen (1996) A control strategy for promoting shop-floor stability. PhD thesis, University of Warwick.

Jacobs, Will (2020) Quantification of microstructure during the phase transformation of dynamically cooled steels using the EMspec® sensor. PhD thesis, University of Warwick.

Ji, Mo (2018) Effect of Grain Size Distribution and Nb Addition on the Recrystallisation Avrami exponent of Fe- 30Ni Model Alloy. PhD thesis, University of Warwick.

Jones, Jason Blair (2013) Investigation of laser printing for 3D printing and additive manufacturing. PhD thesis, University of Warwick.

Joshi, Yogendra K. (2017) Numerical modelling of drawbeads for forming of aluminium alloys. EngD thesis, University of Warwick.

Kaniappan Chinnathai, Malarvizhi (2021) A novel data-driven approach for assembly system scale-up using simulation-based decision making. PhD thesis, University of Warwick.

Karimi, Aurash (2021) Employing density functional theory to model the thermodynamic behaviour and diffusion of nitrogen in the iron-nitrogen-vacancy system. PhD thesis, University of Warwick.

Khoh, Soo Beng (1996) A conformance test framework for the DeviceNet fieldbus. PhD thesis, University of Warwick.

King, Philip Huw (2009) Towards rapid 3D direct manufacture of biomechanical microstructures. PhD thesis, University of Warwick.

Lo, Sherman Edea (2020) Characterisation of computed tomography noise in projection space with applications to additive manufacturing. PhD thesis, University of Warwick.

Mifsud, Jacqueline (2021) CFD modelling of an acoustically driven gas bubble in confinement. PhD thesis, University of Warwick.

Mohammed, Abdul Rehan Khan (2020) A holistic approach for selecting appropriate manufacturing shop floor KPIs. PhD thesis, University of Warwick.

Mohanadass, Araan (2021) Development of automated and connected testing processes for electric vehicles. EngD thesis, University of Warwick.

Moztarzadeh, Hadi (2020) Residual stress in plasma transferred arc (PTA) of Ti-6Al-4V for additive manufacturing (AM). PhD thesis, University of Warwick.

Nako, Enrik (2020) Identification and characterisation of point defects in CVD diamond. PhD thesis, University of Warwick.

Ng, Tat Lun (1996) Improvement of product development cycle time and cost by applying concurrent integrated design and assembly planning : executive summary. EngD thesis, University of Warwick.

Nigam, Anamika (2021) Failure mode avoidance : a risk management approach to obtain new product development projects right-first-time. PhD thesis, University of Warwick.

Oyebolu, Folarin Bolude (2019) Meta-heuristic & hyper-heuristic scheduling tools for biopharmaceutical production. PhD thesis, University of Warwick.

Ozden, Mucahit (2021) Remanufacturing and remanufactured products : an empirical study on customers’ perceptions of smartphones in the UK. PhD thesis, University of Warwick.

Ozkat, Erkan Caner (2018) A physics-driven model for the closed-loop quality control of remote laser welding. PhD thesis, University of Warwick.

Pal, Avishek (2015) Scalable design synthesis for automotive assembly system. PhD thesis, University of Warwick.

Pasco, Corentin (2018) Prepreg forming numerical analysis and experimental characterisation for a novel high-volume forming process. EngD thesis, University of Warwick.

Pemberton, Gareth (2019) Sustainable product development in the industrial gas sector. PhD thesis, University of Warwick.

Phoomboplab, Tirawat (2012) Self-resilient production systems : framework for design synthesis of multi-station assembly systems. PhD thesis, University of Warwick.

Piaggio, Davide (2021) Design of medical devices resilient to low-resource settings : from the regulatory framework to the actual design phase. PhD thesis, University of Warwick.

Pickardt, Christoph W. (2013) Evolutionary methods for the design of dispatching rules for complex and dynamic scheduling problems. PhD thesis, University of Warwick.

Pimentel, Ernani Falcao (1996) A two-pass scheduling method using discrete event simulation. PhD thesis, University of Warwick.

Puik, Erik (2017) Risk adjusted, concurrent development of microsystems and reconfigurable manufacturing systems. PhD thesis, University of Warwick.

Raath, Neill D. (2014) Failure prediction of spot welded boron steel. PhD thesis, University of Warwick.

Raviraj, Akalya (2021) Investigation of the reaction between mould slag inclusions and high aluminium steels in the continuous caster : innovation report. EngD thesis, University of Warwick.

Sandhu, Sukhbinder Singh (1997) Development of a standard framework for manufacturing simulators. PhD thesis, University of Warwick.

SenGupta, Arunava (2020) A multiscale approach for fluid flow effect on microstructure and segregation. PhD thesis, University of Warwick.

Sinha, Sumit (2021) Building transformative framework for isolation and mitigation of quality defects in multi-station assembly systems using deep learning. PhD thesis, University of Warwick.

Stephenson, David (2015) Design and simulation of nanofluidic branching betworks. PhD thesis, University of Warwick.

Suhaimi, Zakiah Syamra’ binti (2019) Exploring the relationship between interaction capabilities and SMEs’ participation in larger customers’ supply chains. PhD thesis, University of Warwick.

Swift, Mark P. (2005) The development and implementation of a collaborative architecture for SMEs : executive summary. PhD thesis, University of Warwick.

Taylor, Scott (2016) Development of a hot gas formable AA7XXX alloy & hybrid SPF/warm forming technology for light-weight automotive structures in niche vehicle manufacturing. EngD thesis, University of Warwick.

Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.

Tseng, Henry (1997) The design and implementation of integrated manufacturing strategy in China : executive summary. PhD thesis, University of Warwick.

Vasconcelos, Bernardo Jose Calafate de (1982) Improvements to stochastic stock control decisions. PhD thesis, University of Warwick.

Vernon, Guy Mark (2000) Work humanization : comparative historical developments in the manufacturing sectors of advanced capitalist societies, 1960-1995. PhD thesis, University of Warwick.

Whiston, James (2021) Fluxing behaviour : reactions between iron ore and fluxing agents in the cyclone converter furnace of Hlsarna. PhD thesis, University of Warwick.

Wilson, Paul F. (2019) Use of 3D virtual models and physical replicas to enhance user experience within heritage applications. PhD thesis, University of Warwick.

Winch, Graham (1992) The implementation of CAD/CAM systems in the metalworking industries. PhD thesis, University of Warwick.

Woodcock, David John (1987) Revising the paradigm of control in repetitive production. PhD thesis, University of Warwick.

Wooldridge, Andrew (2016) Fibre reinforced composites via coaxial electrospinning. PhD thesis, University of Warwick.

Yang, Jia (Researcher in engineering) (2013) Melting and solidification models and thermal characteristics of microencapsulated phase change materials. PhD thesis, University of Warwick.

Yao, Fengjia (2022) The optimisation and integration of AGVs with the manufacturing process. PhD thesis, University of Warwick.

Yeo, Zhiquan (2019) Enhancing the industrial symbiosis opportunities discovery process. EngD thesis, University of Warwick.

Yong, Ching Kiat (2022) Evaluation of laser shock peen additive manufacture inconel 718 for high temperature applications. EngD thesis, University of Warwick.

Zarzycki, Edmund (2020) Innovation report : a methodology for estimating gear pump wear-out reliability using pump pressure ripple and an extremely small sample size - the case study of a heavy-duty diesel engine lubrication gear pump. EngD thesis, University of Warwick.

Zengeya, Patrick (2022) An investigation into the effects of mould temperature on injection moulded HDPE gear performance. PhD thesis, University of Warwick.

Zhang, Jiayi (2021) Ontology based semantic engineering framework and tool for reconfigurable automation systems integration. PhD thesis, University of Warwick.

Zhang, Ye (2020) Intelligent manufacturing applied to additive manufactured polymer gears. PhD thesis, University of Warwick.

Zhao, Huan (2021) Investigations of fast quality prediction and rivet/die optimization for self-piercing riveting joints. PhD thesis, University of Warwick.

Zhu, Yuyi (2019) Effect of internal oxidation in bendability of UHSS. PhD thesis, University of Warwick.

Patent

University of Warwick (2014) Multilayer manufacturing method utilising mould. World International Property Organization no.WO2014/091197 A1 [Online]..

Image

Small, Neil (2019) Thickness strain evolution in a Marciniak test. [Image] (Unpublished)

Dataset

Crawford, Gregory S. (2013) Data for Endogenous product choice : a progress report. [Dataset]

Cresswell, Rosalie, Dupree, Ray, Brown, Steven P., Pereira, Caroline S., Skaf, Munir S., Sorieul, Mathias, Dupree, Paul and Hill, Stefan (2021) Data for Importance of water in maintaining softwood secondary cell wall nanostructure. [Dataset]

Nako, Enrik (2020) Data for Identification and characterisation of point defects in CVD diamond (PhD Thesis). [Dataset]

Rahman, A. T. M. A., Frangeskou, Angelo, Barker, P. F. and Morley, Gavin (2018) Data for An analytical model for the detection of levitated nanoparticles in optomechanics. [Dataset]

Sinha, Sumit, Franciosa, Pasquale and Ceglarek, Dariusz (2021) Point cloud object shape error datasets for root cause analysis of multi-station assembly systems. [Dataset]

Small, Neil and Hazra, S. K. (2019) Data for Digital image correlation of Marciniak tests for AA6111-T4 (1.2mm). [Dataset]

Book Review

Riello, Giorgio (2005) Review of Manufacturing revolution : the intellectual origins of early American industry, by Peskin, L.A. Business History, Vol.47 (No.3). pp. 485-487. ISSN 0007-6791

Riello, Giorgio (2011) Review of The British cotton trade, 1660-1815, by Lemire, B. Textile: The Journal of Cloth and Culture, Vol.9 (No.2). pp. 256-259. ISSN 14759756