Journal Article

Agg, Chloe and Khimji, Samana (2021) Perception of wellbeing in educational spaces. Building Services Engineering Research and Technology, 42 (6). pp. 677-689. doi:10.1177/01436244211009828

Al Hamd, Rwayda Kh. S. , Gillie, Martin, Warren, Holly, Torelli, Giacomo, Stratford, Tim and Wang, Yong (2018) The effect of load induced thermal strain on flat slab behaviour at elevated 1 temperatures. Fire Safety Journal, 97 . pp. 12-18. doi:10.1016/j.firesaf.2018.02.004

Ali, Syed Zeeshan, De Luca, Andrea, Hopper, Richard, Boual, Sophie, Gardner, J. W. and Udrea, Florin (2015) A low-power, low-cost infra-red emitter in CMOS technology. IEEE Sensors Journal, 15 . pp. 6775-6782.

Altaee, Mohammed J., Cunningham, Lee S. and Gillie, Martin (2017) Experimental investigation of CFRP-strengthened steel beams with web openings. Journal of Constructional Steel Research, 138 . pp. 750-760. doi:10.1016/j.jcsr.2017.08.023

Barari, Amin, Zeng, Xiangwu, Rezania, Mohammad and Ibsen, Lars Bo (2021) Three-dimensional modeling of monopiles in sand subjected to lateral loading under static and cyclic conditions. Geomechanics and Engineering, 26 (2). pp. 175-190. doi:10.12989/gae.2021.26.2.175

Bloodworth, Alan G., Cao, J. and Xu, M. (2012) Numerical modelling of shear behaviour of reinforced concrete pile caps. Journal of Structural Engineering, 138 (6). pp. 708-717. doi:10.1061/(ASCE)ST.1943-541X.0000499

Critoph, Robert E. and Pacho, Angeles M. Rivero (2022) District heating of buildings by renewable energy using thermochemical heat transmission. Energies, 15 (4). e1449. doi:10.3390/en15041449

Dahlmann, Frederik and Veal, Gareth (2016) The role of umbrella agreements in achieving sustainability goals : energy efficiency at the Empire State building. Journal of Green Building, 11 (1). pp. 71-94. doi:10.3992/jgb.11.1.71.1

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L., Corrochano, D. G. and Yoon, J. I. (2018) Challenges of micro/mild hybridisation for construction machinery and applicability in UK. Renewable and Sustainable Energy Reviews , 91 . pp. 301-320. doi:10.1016/j.rser.2018.03.027

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part A : fundamental concepts and design. Energies, 10 (7). 962. doi:10.3390/en10070962

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part B : a real-time comparative study. Energies, 10 (9). 1250. doi:10.3390/en10091250

Dombrovsky, Leonid A., Dembele, Siaka and Wen, Jennifer X. (2018) An infrared scattering by evaporating droplets at the initial stage of a pool fire suppression by water sprays. Infrared Physics & Technology, 91 . pp. 55-62. doi:10.1016/j.infrared.2018.03.027

Dombrovsky, Leonid A., Dembele, Siaka, Wen, Jennifer X. and Sikic, Ivan (2018) Two-step method for radiative transfer calculations in a developing pool fire at the initial stage of its suppression by a water spray. International Journal of Heat and Mass Transfer, 127 (Part B). pp. 717-726. doi:10.1016/j.ijheatmasstransfer.2018.07.095

Fukumoto, Kazui, Wang, Changjian and Wen, Jennifer X. (2018) Large eddy simulation of upward flame spread on PMMA walls with a fully coupled fluid–solid approach. Combustion and Flame, 190 . pp. 365-387. doi:10.1016/j.combustflame.2017.11.012

Garcia, Reyes, Guadagnini, Maurizio, Pilakoutas, Kypros and Pech Poot, Luis Alberto (2016) FRP strengthening of substandard lap-spliced RC members : a comprehensive survey. Advances in Structural Engineering, 20 (6). pp. 976-1001. doi:10.1177/1369433216668362

Garcia, Reyes, Hajirasouliha, Iman, Guadagnini, Maurizio, Helal, Yasser, Jemaa, Yaser, Pilakoutas, Kypros, Mongabure, Philippe, Chrysostomou, Christis, Kyriakides, Nicholas, Ilki, Alper, Budescu, Mihai, Taranu, Nicolae, Ciupala, Mihaela Anca, Torres, Lluis and Saiidi, M. (2014) Full-scale shaking table tests on a substandard RC building repaired and strengthened with post-tensioned metal straps. Journal of Earthquake Engineering, 18 (2). pp. 187-213. doi:10.1080/13632469.2013.847874

Garcia, Reyes, Hajirasouliha, Iman and Pilakoutas, Kypros (2010) Seismic behaviour of deficient RC frames strengthened with CFRP composites. Engineering Structures, 32 (10). pp. 3075-3085. doi:10.1016/j.engstruct.2010.05.026

Garcia, Reyes, Jemaa, Yaser, Helal, Yasser, Guadagnini, Maurizio and Pilakoutas, Kypros (2014) Seismic strengthening of severely damaged beam-column RC joints using CFRP. Journal of Composites for Construction, 18 (2). doi:10.1061/(ASCE)CC.1943-5614.0000448

Garcia, Reyes, Pilakoutas, Kypros, Hajirasouliha, Iman, Guadagnini, Maurizio, Kyriakides, Nicholas and Ciupala, Mihaela Anca (2017) Seismic retrofitting of RC buildings using CFRP and post-tensioned metal straps : shake table tests. Bulletin of Earthquake Engineering, 15 (8). pp. 3321-3347. doi:10.1007/s10518-015-9800-8

Garcia, Reyes, Sullivan, Timothy J. and Della Corte, Gaetano (2010) Development of a displacement based design method for steel frame-RC wall buildings. Journal of Earthquake Engineering, 14 (2). pp. 252-277. doi:10.1080/13632460902995138

Gaylard, A. P., Kirwan, Kerry and Lockerby, Duncan A. (2017) Surface contamination of cars : a review. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, 231 (9). pp. 1160-1176. doi:10.1177/0954407017695141

Grant, Wyn (2005) The provision of fire services in rural areas. Public Policy and Administration, Vol.20 (No.1). pp. 67-79. doi:10.1177/095207670502000105

Guerra, Valentina and McNally, Tony (2020) Surface cleaning of 2D materials : Boron Nitride Nanosheets (BNNS) and exfoliated Graphite Nanoplatelets (GNP). Advanced Materials Interfaces, 7 (19). 2000944. doi:10.1002/admi.202000944

Hafner, Rebecca J., Elmes, David and Read, Daniel (2019) Exploring the role of messenger effects and feedback frames in promoting uptake of energy-efficient technologies. Current Psychology, 38 . pp. 1601-1612. doi:10.1007/s12144-017-9717-2

Han, Jiaqiang, Geng, Pengqiang, Wang, Zihao, Lu, Yuhan, Wang, Fei, Wen, Jennifer X. and Liu, Fang (2022) Effect of ceiling extraction on the smoke spreading characteristics and temperature profiles in a tunnel with one closed end. Tunnelling and Underground Space Technology, 119 . 104236. doi:10.1016/j.tust.2021.104236

Han, Jiaqiang, Wang, Zihao, Geng, Pengqiang, Wang, Fei, Wen, Jennifer X. and Liu, Fang (2021) The effect of blockage and tunnel slope on smoke spread and ceiling temperature distribution in a natural-ventilated metro depot. Energy and Buildings, 253 . 111540. doi:10.1016/j.enbuild.2021.111540

Hicks, Stephen J., Braun, Matthias, Markovic, Zlatko and Way, James (2021) New Eurocode 4 design rules for shallow floor construction. ce/papers, 4 (2-4). pp. 1016-1020. doi:10.1002/cepa.1391

Huang, Xianjia, Wang, Yuhong, Zhu, He, He, Le, Tang, Fei and Wen, Jennifer X. (2021) Experimental study on the radiant heat flux of wall-attached fire plume generated by rectangular sources. International Journal of Thermal Sciences, 159 . 106605. doi:10.1016/j.ijthermalsci.2020.106605

Hutchins, David A., Watson, Richard, Davis, Lee A. J., Akanji, Lolu, Billson, Duncan R., Burrascano, Pietro, Laureti, Stefano and Ricci, Marco (2020) Ultrasonic propagation in highly attenuating insulation materials. Sensors, 20 (8). e2285. doi:10.3390/s20082285

Imjai, Thanongsak, Guadagnini, Maurizio, Pilakoutas, Kypros, Garcia, Reyes, Sukontasukkul, Piti and Limkatanyu, Suchart (2021) A practical macro-mechanical model for the bend capacity of fibre-reinforced polymer bars. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 174 (10). p. 824. doi:10.1680/jstbu.19.00135

Imjai, Thanongsak, Setkit, Monthian, Garcia, Reyes and Figueiredo, Fabio P. (2020) Strengthening of damaged low strength concrete beams using PTMS or NSM techniques. Case Studies in Construction Materials, 13 (e00403). doi:10.1016/j.cscm.2020.e00403

Karavasilis, Theodore L. (2016) Assessment of capacity design of columns in steel moment resisting frames with viscous dampers. Soil Dynamics and Earthquake Engineering, 88 . pp. 215-222. doi:10.1016/j.soildyn.2016.06.006

Breathe collaborators (Including: Khan, Iftekhar, Maredza, Mandy, Dritsaki, Melina, Mistry, Dipesh, Lall, Ranjit, Lamb, Sally, Couper, Keith, Gates, Simon, Perkins, Gavin D. and Petrou, Stavros). (2020) Is protocolised weaning that includes early extubation onto non-invasive ventilation more cost effective than protocolised weaning without non-invasive ventilation? Findings from the Breathe Study. PharmacoEconomics - Open, 4 . pp. 697-710. doi:10.1007/s41669-020-00210-1

Khodadadi Azadboni, Reza, Heidari, Ali, Boeck, Lorenz R. and Wen, Jennifer X. (2019) The effect of concentration gradients on deflagration-to-detonation transition in a rectangular channel with and without obstructions – a numerical study. International Journal of Hydrogen Energy, 44 (13). pp. 7032-7040. doi:10.1016/j.ijhydene.2019.01.157

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2020) Numerical analysis of flame acceleration and onset of detonation in homogenous and inhomogeneous mixture. Journal of Loss Prevention in the Process Industries, 64 . 104063. doi:10.1016/j.jlp.2020.104063

Kucukler, Merih (2020) Lateral instability of steel beams in fire : behaviour, numerical modelling and design. Journal of Constructional Steel Research, 170 . 106095. doi:10.1016/j.jcsr.2020.106095

Kucukler, Merih, Gardner, Leroy and Bub, Yidu (2020) Flexural-torsional buckling of austenitic stainless steel I-section beam-columns : testing, numerical modelling and design. Thin-Walled Structures, 152 . 106572. doi:10.1016/j.tws.2019.106572

Kucukler, Merih, Xing , Zhe and Gardner, Leroy (2020) Behaviour and design of stainless steel columns in fire. Journal of Constructional Steel Research, 165 . 105890. doi:10.1016/j.jcsr.2019.105890

Lewis, W. J. (Wanda J.) (2008) Computational form-finding methods for fabric structures. Proceedings of the ICE - Engineering and Computational Mechanics, Vol.161 (No.3). pp. 139-149. doi:10.1680/eacm.2008.161.3.139

Lowes, Richard, Woodman, Bridget and Fitch-Roy, Oscar (2019) Policy change, power and the development of Great Britain's Renewable Heat Incentive. Energy Policy, 131 . pp. 410-421. doi:10.1016/j.enpol.2019.04.041

Lu, Wei, Duan, Qiangling, Chen, Haodong, Li, Huang, Liu, Yujun, Wang, Qingsong and Sun, Jinhua (2019) Thermal response and resistance optimization of various types of point-supported glass facades. Construction and Building Materials, 224 . pp. 610-621. doi:10.1016/j.conbuildmat.2019.07.032

Ma, Chau Kun, Garcia, Reyes, Yung, Sofrie Chin Siew, Awang, Abdullah Zawawi, Omar, Wahid and Pilakoutas, Kypros (2019) Strengthening of pre-damaged HSC columns using post-tensioned steel straps. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 172 (10). pp. 703-711. doi:10.1680/jstbu.18.00031

Ma, Chau‐Khun, Awang, Abdullah Zawawi, Garcia, Reyes, Omar, Wahid and Pilakoutas, Kypros (2016) Behaviour of over‐reinforced high‐strength concrete beams confined with post‐tensioned steel straps – an experimental investigation. Structural Concrete, 17 (5). pp. 768-777. doi:10.1002/suco.201500062

McLaggan, M. S., Hadden, R. M. and Gillie, Martin (2018) Fire performance of phase change material enhanced plasterboard. Fire Technology, 54 (1). pp. 117-134. doi:10.1007/s10694-017-0675-x

McMahon, Richard A., Santos, Hugo and Sobral Mourao, Zanaida (2018) Practical considerations in the deployment of ground source heat pumps in older properties - a case study. Energy & Buildings, 159 . pp. 54-65.

Moss, Roger W. and Critoph, R. E. (2022) Optimisation of a recirculating domestic hot water system to minimise wait time and heat loss. Energy and Buildings, 260 . 111850. doi:10.1016/j.enbuild.2022.111850

Mottram, J. Toby and Zafari, Behrouz (2011) Pin-bearing strengths for bolted connections in fibre-reinforced polymer structures. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 164 (5). pp. 291-305. doi:10.1680/stbu.2011.164.5.291

Oliveira, Luis, Mitchell, Val and May, Andrew (2020) Smart home technology—comparing householder expectations at the point of installation with experiences 1 year later. Personal and Ubiquitous Computing, 24 . pp. 613-626. doi:10.1007/s00779-019-01302-4

Qureshi, Jawed and Mottram, J. Toby (2013) Behaviour of pultruded beam-to-column joints using steel web cleats. Thin-Walled Structures, 73 . pp. 48-56. doi:doi.org/10.1016/j.tws.2013.06.019

Raffoul, Samar, Escolano-Margarit, David, Garcia, Reyes, Guadagnini, Maurizio and Pilakoutas, Kypros (2019) Constitutive model for rubberized concrete passively confined with FRP laminates. Journal of Composites for Construction, 23 (6). 04019044. doi:10.1061/(ASCE)CC.1943-5614.0000972

Raffoul, Samar, Garcia, Reyes, Escolano-Margarit, David, Guadagnini, Maurizio, Hajirasouliha, Iman and Pilakoutas, Kypros (2017) Behaviour of unconfined and FRP-confined rubberised concrete in axial compression. Construction and Building Materials, 147 . pp. 388-397. doi:10.1016/j.conbuildmat.2017.04.175

Raffoul, Samar, Garcia, Reyes, Pilakoutas, Kypros, Guadagnini, Maurizio and Flores Medina, Nelson (2016) Optimisation of rubberised concrete with high rubber content : an experimental investigation. Construction and Building Materials, 124 . pp. 391-404. doi:10.1016/j.conbuildmat.2016.07.054

Rezania, Mohammad and Bagheri, Meghdad (2021) Geological and geotechnical characteristics of London clay from the Isle of Sheppey. Geotechnical and Geological Engineering, 39 . pp. 1701-1713. doi:10.1007/s10706-020-01572-3

Rezania, Mohammad and Dejaloud, Hesam (2021) BS-CLAY1 : anisotropic bounding surface constitutive model for natural clays. Computers and Geotechnics, 135 . doi:10.1016/j.compgeo.2021.104099

Russell, J. M., Owen, J. S. and Hajirasouliha, I. (2019) Dynamic column loss analysis of reinforced concrete flat slabs. Engineering Structures, 198 . 109453. doi:10.1016/j.engstruct.2019.109453

Russell, Justin, Sagaseta, J., Cormie, D. and Jones, A. E. K. (2019) Historical review of prescriptive design rules for robustness after the collapse of Ronan Point. Structures, 20 . pp. 365-373. doi:10.1016/j.istruc.2019.04.011

Shahabpoor, E., Pavic, A., Racic, V. and Živanović, Stana (2017) Effect of group walking traffic on dynamic properties of pedestrian structures. Journal of Sound and Vibration, 387 . pp. 207-225. doi:10.1016/j.jsv.2016.10.017

Singh, Anubhav, Reynolds, Neil, Carnegie, Craig Robert , Micallef, Christopher, Keating, Elspeth, Winnett, James, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2019) A novel route for volume manufacturing of hollow braided composite beam structures. Advanced Manufacturing: Polymer & Composites Science, 5 (4). 224-229 . doi:10.1080/20550340.2019.1680514

Su, Jiang and Bloodworth, Alan G. (2019) Simulating composite behaviour in SCL tunnels with sprayed waterproofing membrane interface : a state-of-the-art review. Engineering Structures, 191 . pp. 698-710. doi:10.1016/j.engstruct.2019.04.067

Suwondo, Riza, Cunningham, Lee, Gillie, Martin and Bailey, Colin (2018) Improving the performance of composite floors subjected to post-earthquake fire. Fire Safety Journal, 102 . pp. 18-26. doi:10.1016/j.firesaf.2018.10.004

Suwondo, Riza, Gillie, Martin, Cunningham, Lee and Bailey, Colin (2018) Effect of earthquake damage on the behaviour of composite steel frames in fire. Advances in Structural Engineering, 21 (16). pp. 2589-2604. doi:10.1177/1369433218761138

Tamainot-Telto, Zacharie (2016) Novel method using Dubinin-Astakhov theory in sorption reactor design for refrigeration and heat pump applications. Applied Thermal Engineering, 107 . pp. 1123-1129. doi:10.1016/j.applthermaleng.2016.07.073

Tang, Fei, Hu, Peng, He, Qing, Zhang, Jianping and Wen, Jennifer X. (2021) Effect of sidewall on the flame extension characteristics beneath a ceiling induced by carriage fire in a channel. Combustion and Flame, 223 . pp. 202-215. doi:10.1016/j.combustflame.2020.09.020

Tang, Fei, Hu, Peng, Zhang, Jianping and Wen, Jennifer X. (2021) Heat fluxes under the ceiling induced by wall fires with various burner aspect ratios in a channel. Proceedings of the Combustion Institute, 38 (3). pp. 4569-4577. doi:10.1016/j.proci.2020.05.029

Tiele, Akira, Esfahani, Siavash and Covington, James A. (2018) Design and development of a low-cost, portable monitoring device for indoor environment quality. Journal of Sensors, 2018 . 5353816. doi:10.1155/2018/5353816

Tkachenko, Nataliya, Bricker, Stephanie and Jarvis, Stephen A. (2015) To dig or not to dig? Place and perception in subsurface housing. Proceedings of the Institution of Civil Engineers - Engineering Sustainability . doi:10.1680/jensu.15.00019

Tong, Xin and Zhao, Xiaowei (2018) Passive vibration control of the SCOLE beam system. Structural Control and Health Monitoring, 25 (8). e2204. doi:10.1002/stc.2204

Torelli, Giacomo, Gillie, Martin, Mandal, Parthasarathi and Tran, Van-Xuan (2017) A multiaxial load-induced thermal strain constitutive model for concrete. International Journal of Solids and Structures, 108 . pp. 115-125. doi:10.1016/j.ijsolstr.2016.11.017

Torelli, Giacomo, Mandal, Partha, Gillie, Martin and Tran, Van-Xuan (2018) A confinement-dependent load-induced thermal strain constitutive model for concrete subjected to temperatures up to 500°C. International Journal of Mechanical Sciences, 144 . pp. 887-896. doi:10.1016/j.ijmecsci.2017.12.054

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2016) Concrete strains under transient thermal conditions : a state-of-the-art review. Engineering Structures, 127 . pp. 172-188. doi:10.1016/j.engstruct.2016.08.021

Truong, Dinh Quang, Yoon, Jong II, Marco, James, Jennings, P. A. (Paul A.), Ahn, Kyoung Kwan and Ha, Cheolkeun (2017) Sensorless force feedback joystick control for teleoperation of construction equipment. International Journal of Precision Engineering and Manufacturing, 18 (7). pp. 955-969. doi:10.1007/s12541-017-0113-5

Trương, Đình Quang, Truong, Bui Ngoc Minh, Trung, Nguyen Thanh, Nahian, Syed Abu and Ahn, Kyoung Kwan (2017) Force reflecting joystick control for applications to bilateral teleoperation in construction machinery. International Journal of Precision Engineering and Manufacturing, 18 (3). pp. 301-315. doi:10.1007/s12541-017-0038-z

Tzimas, Angelos S., Kamaris, Geordios, Karavasilis, Theodore L. and Galasso, C. (2016) Collapse risk and residual drift performance of steel buildings using post-tensioned MRFs and viscous dampers in near-fault regions. Bulletin of Earthquake Engineering, 14 (6). pp. 1643-1662. doi:10.1007/s10518-016-9898-3

Ukairo, Okorie, Dembele, Siaka, Heidari, Ali, Pretrel, Hugues and Wen, Jennifer X. (2021) Investigation of fires in a mechanically ventilated compartment using the CFD code FireFOAM. Nuclear Engineering and Design, 384 . 111515. doi:10.1016/j.nucengdes.2021.111515

Vasdravellis, George, Baiguera , M. and Karavasilis, Theodore L. (2016) Dual seismic-resistant steel frame with high post-yield stiffness braces for residual drift reduction : numerical evaluation. Journal of Constructional Steel Research, 122 . pp. 198-212. doi:10.1016/j.jcsr.2016.03.019

Wang, C. J., Liu, H. R. and Wen, Jennifer X. (2017) An improved PaSR-based soot model for turbulent fires. Applied Thermal Engineering . doi:10.1016/j.applthermaleng.2017.10.129

Wang, Shuyi, Su, Daizhong, Wu, You and Chai, Zijian (2020) Application of life-cycle assessment to the eco-design of LED lighting products. Euro-Mediterranean Journal for Environmental Integration, 5 (2). 41. doi:10.1007/s41207-020-00180-0

Wang, Yang and He, Wei (2021) Temporospatial techno-economic analysis of heat pumps for decarbonising heat of Great Britain. Energy and Buildings, 250 . 111198. doi:10.1016/j.enbuild.2021.111198

Wang, Yang and He, Wei (2021) Temporospatial techno-economic analysis of heat pumps for decarbonising heating in Great Britain. Energy and Buildings, 250 . 111198. doi:10.1016/j.enbuild.2021.111198

Xing , Zhe, Kucukler, Merih and Gardner, Leroy (2020) Local buckling of stainless steel plates in fire. Thin-Walled Structures, 148 . p. 106570. doi:10.1016/j.tws.2019.106570

Xu, Baopeng and Wen, Jennifer X. (2022) Computational analysis of the mechanisms and characteristics for pulsating and uniform flame spread over liquid fuel at subflash temperatures. Combustion and Flame, 238 . 111933. doi:10.1016/j.combustflame.2021.111933

Zafari, Behrouz and Mottram, J. Toby (2015) Characterization by full-size testing of pultruded frame joints for the Startlink house. Journal of Composites in Construction , 19 (1). pp. 1-9. doi:10.1061/(ASCE)CC.1943-5614.0000488

Zanardini, Elisabetta, May, Eric, Purdy, Kevin J. and Murrell, J. Colin (2019) Nutrient cycling potential within microbial communities on culturally important stoneworks. Environmental Microbiology Reports, 11 (2). pp. 147-154. doi:10.1111/1758-2229.12707

Zhao, Xiaowei and Weiss, George (2017) Stability properties of coupled impedance passive LTI systems. IEEE Transactions on Automatic Control, 62 (11). 5769 -5779. doi:10.1109/TAC.2017.2694558

Zhao, Zunxin, Tang, Fei, Chen, Lei, Zhang, Jianping and Wen, Jennifer X. (2021) Effect of parallel curtain walls on upward flame spread characteristics and mass loss rate over PMMA. Fire Technology . doi:10.1007/s10694-021-01179-x (In Press)

Zhou, Dan, (Researcher in engineering), Zhao, Changying and Tian, Y. (Yuan) (2012) Review on thermal energy storage with phase change materials (PCMs) in building applications. Applied Energy, Vol.92 . pp. 593-605. doi:10.1016/j.apenergy.2011.08.025

Živanović, Stana and Pavić, Aleksandar (2009) Probabilistic modeling of walking excitation for building floors. Journal of Performance of Constructed Facilities, Vol.23 (No.3). pp. 132-143. doi:10.1061/(ASCE)CF.1943-5509.0000005

Conference Item

Bloodworth, Alan G., Houlsby, G. T., Burd, H. J. and Augarde, C. E. (2001) Three-dimensional modelling of the interaction between buildings and tunnelling operations. In: International Conference on the response of buildings to excavation-induced ground movements, London, United Kingdom, 17-18 Jul 2001. Published in: Proceedings of the International Conference on the response of buildings to excavation-induced ground movements

Dong, Hongyang, Edrah, Mohamed, Zhao, Xiaowei, Collu, Maurizio, Xu, Xue, Abhinav, K A and Lin, Zi (2020) Model-free semi-active structural control of floating wind turbines. In: 2020 Chinese Automation Congress (CAC), Shanghai, China, 6-8 Nov 2020 ISBN 9781728176871. ISSN 2688-0938. doi:10.1109/CAC51589.2020.9327083

Hicks, Stephen J., Uy, Brian and Kang, Won-Hee (2017) The new joint Australian and New Zealand design standard for steel and composite bridge AS/NZS 5100.6 - Part 6 : Steel and Composite Construction. In: 8th International Conference on Composite Construction in Steel and Concrete, Wyoming, 29 Jul-2 Aug 2017. Published in: Proceedings of the Eighth International Conference on Composite Construction in Steel and Concrete pp. 98-108. ISBN 9781564240620.

Marshall, Paul, Cain, Rebecca and Payne, Sarah R. (2011) Situated crowdsourcing : a pragmatic approach to encouraging participation in healthcare design. In: 5th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth), 2011 , Dublin, 23-26 May 2011. Published in: Pervasive Computing Technologies for Healthcare (PervasiveHealth), 2011 pp. 555-558. ISBN 9781612847672. doi:10.4108/icst.pervasivehealth.2011.246095

Sinha, Anubhav, Vendra, C. Madhav Rao and Wen, Jennifer X. (2017) Performance evalulation of empirical models for vented lean hydrogen explosions. In: International Conference on Hydrogen Safety, Hamburg, Germany, 11-13 Sep 2017

Tamainot-Telto, Zacharie (2019) Efficient solar driven air conditioning system for hot climate : case study of Doha. In: 12th International Conference on Solar Energy for Buildings and Industry (EUROSUN2018), Rapperswil, Switzerland, 10-13 Sep 2018. Published in: Proceedings of EUROSUN2018 doi:10.18086/eurosun2018.04.12

Tamainot-Telto, Zacharie (2016) Towards optimum specifications of adsorbent for heat pump and refrigeration applications. In: Heat Powered Cycles Conference 2016, Nottingham , 26-29 Jun 2016. Published in: Heat Powered Cycles Conference 2016 Extended Abstracts (HPC760). pp. 129-130. ISBN 9780956332929 .

Uy, Brian, Hicks, Stephen J., Kang, Won-Hee, Thai, Huu-Tai and Aslani, Farhad (2017) The new Australia/New Zealand standard on composite steel-concrete buildings, ASNZS2327. In: 8th International Conference on Composite Construction in Steel and Concrete, Wyoming, 29 Jul-2 Aug 2017. Published in: Proceedings of the Eighth International Conference on Composite Construction in Steel and Concrete pp. 86-97. ISBN 9781564240620.

Zhang, Jincheng, Zhao, Xiaowei and Wei, Xing (2020) Data-driven structural control of monopile wind turbine towers based on machine learning. In: The 21st IFAC World Congress, Berlin, Germany, 12-17 Jul 2020. Published in: IFAC-PapersOnLine, 53 (2). pp. 7466-7471. ISSN 2405-8963. doi:10.1016/j.ifacol.2020.12.1299

Report

Alexander, Jennifer (2012) Kirby Hall, Northants : the evidence of the masons' marks. London UK: English Heritage. (Unpublished)

Ascione, Luigi, Caron, Jean - François , Godonou, Patrice, IJselmuijden, K. van, Knippers, Jan, Mottram, J. Toby, Oppe, Mattias, Sorensen, Morten Gantrils , Taby, Jon and Tromp, Liesbeth (2016) Prospect for new guidance in the design of FRP : support to the implementation and further development of the Eurocode. Brussels: Publications Office of the European Union. (Report EUR 27666 EN).

Critoph, Robert E. (2014) Gas driven heat pumps : market potential, support measures and barriers to development of the UK market. London, UK: Department of Energy and Climate Change.

Critoph, Robert E. (2014) State of the art in gas driven heat pumps. London, UK: Department of Energy and Climate Change.

Critoph, Robert E. and Metcalf, Steven J. (2019) UK Summary Report on IEA Heat Pump Technology Collaboration Programme (TCP) Annex 43 : thermally driven heat pumps. London: UK Department for Business, Energy & Industrial Strategy.

Thesis or Dissertation

Abbaker, Abdelfattah Elnur (2006) Behavior of lightweight framing systems for buildings. PhD thesis, University of Warwick.

Allen, Frances M. (2018) Exploring the use of home adaptation and related information for people with dementia living in domestic dwellings. PhD thesis, University of Warwick.

Bae, Jaehoon (2019) Seismic design and assessment of resilient steel frames with visco-plastic dampers. PhD thesis, University of Warwick.

Bastien, Athina Nicolaides (2002) Successful organisational and human practices in the UK construction industry: proposing the CONSTRUCT© framework of good practice : executive summary. EngD thesis, University of Warwick.

Brennan, Robert James (2020) How do new ventures successfully create an ecosystem to capture value from a disruptive technology? DBA thesis, University of Warwick.

Brigham, Martin Patrick (2005) The organisation of technology and the technology of organisation: the Vehicle Mounted Data System and the provision of UK fire services. PhD thesis, University of Warwick.

Gooding, Dominic Edward Maxwell (1994) Improved processes for the production of soil-cement building blocks. PhD thesis, University of Warwick.

Huang, Xiameng (2018) Strategic placement of viscous dampers in steel buildings under strong earthquake ground motions. PhD thesis, University of Warwick.

James, Diane Evelyn Trenchard (2019) ‘An endless variety of forms and proportions’: Indian influence on British gardens and garden buildings, c.1760-c.1865. PhD thesis, University of Warwick.

Khalifa, Abdalla (2015) Processing and characterisation of cementitious materials reinforced with fibres. PhD thesis, University of Warwick.

Kintingu, Simion Hosea (2009) Design of interlocking bricks for enhanced wall construction, flexibility, alignment accuracy and load bearing. PhD thesis, University of Warwick.

Millard, S. G. (1983) Shear transfer in cracked reinforced concrete. PhD thesis, University of Warwick.

Qamar, Furqan (2020) Utilisation of natural fibrous plaster for out-of-plane lateral resistance of masonry walling. PhD thesis, University of Warwick.

Sadeghi, Mahdad (2015) Achieving design quality in building projects : an evolving understanding of critical success factors and stakeholder attributes. PhD thesis, University of Warwick.

Sikic, Ivan (2018) Radiative heat transfer for modelling fire and fire suppression. PhD thesis, University of Warwick.

Spillmann, Thorsten S. (2014) The performance and properties of novel desiccant coated heat exchange surfaces for solar air conditioning. PhD thesis, University of Warwick.

Tellett, John (1984) Pocket-type reinforced brickwork retaining walls. PhD thesis, University of Warwick.

Wei, Xing (2020) Vibration suppression of large and flexible offshore wind turbine. PhD thesis, University of Warwick.

Dataset

Thai, Huu-Tai , Thai, Son, Ngo, Tuan, Uy, Brian, Kang, Won-Hee and Hicks, Stephen J. (2020) Concrete-filled steel tubular (CFST) columns database with 3,208 tests. [Dataset]