A

Abolfathi, Soroush (2016) Nearshore mixing due to the effects of waves and currents. PhD thesis, University of Warwick.

Abbaker, Abdelfattah Elnur (2006) Behavior of lightweight framing systems for buildings. PhD thesis, University of Warwick.

Ali, Reza (2003) Receptivity & transition in boundary-layers over rigid & compliant surfaces. PhD thesis, University of Warwick.

Aineto, Manuel M. (1998) Adaptive filtering of reverberation for active sonar signal detection. PhD thesis, University of Warwick.

Arani, Faramarz Shayan (1993) Trellis coded modulation techniques. PhD thesis, University of Warwick.

Ali, Falah Hussain (1992) Collaborative coding multiple access communications. PhD thesis, University of Warwick.

Ali, M. R. N. (1985) Developments in D.C. disc machines :|bdesign, construction and performance of permanent magnet axial field motors for traction applications. PhD thesis, University of Warwick.

Abel, Edward (1981) Air cored linear machines for ground transportation. PhD thesis, University of Warwick.

Angelis, Vasilis (1978) A dynamic model of growth and decline in industrial cities. PhD thesis, University of Warwick.

Almås, Terje (1975) Ultrasonic atomisers for reducing pollution from petrol engines. PhD thesis, University of Warwick.

B

Berkouk, Karim (1999) Theoretical and physical models of a pressure pulse propagation in the spinal system. PhD thesis, University of Warwick.

Bhattacharya, A. K. (1999) The new manufacturing: executive summary. EdD thesis, University of Warwick.

Bashford, Andrew Graham (1998) Characteristics and applications of air-coupled micromachined ultrasonic transducers. PhD thesis, University of Warwick.

Browne, Simon (1993) Propagation studies and modulation techniques for a distributed architecture rural radio-telephone system. PhD thesis, University of Warwick.

Bajalan, M.R. (1992) Machining of steels with ceramic tools. PhD thesis, University of Warwick.

Balmer, Leslie (1986) Short term spectral estimation with applications. PhD thesis, University of Warwick.

Burrow, Laurence Downton (1978) The design of control systems for automated transport. PhD thesis, University of Warwick.

Blakeley, William T. F. (1977) Perturbation results and their application to the stability of evolution equations. PhD thesis, University of Warwick.

Butlin, Richard Stephen (1973) Microwave integrated circuits : preparation of and measurement techniques for metal and dielectric films. PhD thesis, University of Warwick.

C

Chatzistefani, Nefeli (2017) Mathematical modelling and simulation of the foot with specific application to the Achilles tendon. PhD thesis, University of Warwick.

Chuang, Tzu-Shien (1997) A variable structure space voltage vector controlled switched reluctance flux vector drive. PhD thesis, University of Warwick.

Cooper, Alison Jane (1996) The effects of rotation and wall compliance on hydrodynamic stability. PhD thesis, University of Warwick.

Chan, Ping Hai (1996) The development and application of optically generated spatial carrier fringes for the quantitative measurement of flowfields and solid surfaces. PhD thesis, University of Warwick.

Carpinetti, Luiz C. R. (1993) Methods for computer aided inspection of geometric tolerances. PhD thesis, University of Warwick.

Crossley, Paul Richard (1992) Modelling and analysis of traction control systems in automobiles. PhD thesis, University of Warwick.

Costa, Alvaro Neto (1992) Application of multibody system (MBS) techniques to automotive vehicle chassis simulation for motion control studies. PhD thesis, University of Warwick.

Cheng, T. C. (Tze Chiang) (1985) A design study of high power microwave GaAs FET amplifier. PhD thesis, University of Warwick.

Collingwood, Peter Charles (1985) On algebraic estimation and systems with graded polynomial structure. PhD thesis, University of Warwick.

Campbell, Peter (1974) The D.C. disc-armature electric motor. PhD thesis, University of Warwick.

D

Delivasilis, Dimitrios L. (2003) Data security for third generation telecommunication systems. PhD thesis, University of Warwick.

Davies, Gareth N. L. (2000) Heat driven adsorption cooling utilising enhanced effective thermal conductivity monolithic adsorbent generators for refrigeration and ice production in developing countries. PhD thesis, University of Warwick.

Davies, Christopher (1995) Evolution of Tollmien-Schlichting waves over a compliant panel. PhD thesis, University of Warwick.

Dale-Jones, Ralph (1993) Contrast enhancement using grey scale transformation techniques. PhD thesis, University of Warwick.

Dudley, Michael (1982) Deformation studies on Fe 3.5 wt % Si single crystals by X-ray topography. PhD thesis, University of Warwick.

Dutta Gupta, Punya Brata (1979) Thermoelectric magnetohydrodynamics. PhD thesis, University of Warwick.

E

El-Zehairy, A. A. (2020) 3D coupled pore-network modelling of flow and solute transport through porous media, from laminar to turbulent flow. PhD thesis, University of Warwick.

Eden, Robert David (1993) Water hyacinth as an energy resource. PhD thesis, University of Warwick.

F

Farrall, Simon David (1993) A study in the use of fuzzy logic in the management of an automotive heat engine / electric hybrid vehicle powertrain. PhD thesis, University of Warwick.

G

Grinsted, Susan (1990) The use of simulation to investigate heuristics for alternate routing in manufacturing systems. PhD thesis, University of Warwick.

Gill, Gurmail S. (1978) Engine characterisation and control for vehicle applications. PhD thesis, University of Warwick.

H

Henson, Richard William (1993) An expert system for X-ray rocking curve analysis using analogical reasoning. PhD thesis, University of Warwick.

Howard, Lowell Paine (1993) Advances in ultra-low contact force nanometric surface metrology. PhD thesis, University of Warwick.

He, Wei (1993) Adaptive-rate digital speech transmission. PhD thesis, University of Warwick.

Heydari, Farhad (1990) Mechanisms of sand flow and compaction in core-blowing. EngD thesis, University of Warwick.

Hart, Linda (1990) Surface characterisation of semiconductor materials. PhD thesis, University of Warwick.

Hamilton, David (1983) The analysis of 81Krm equilibrium inhalation data. PhD thesis, University of Warwick.

Humphreys, John (1979) A computer-based system for production of Braille music. PhD thesis, University of Warwick.

Hosseini, N. M. (1977) Application of computer-aided design to microstrip circuits. PhD thesis, University of Warwick.

I

Iskandarani, M. Z. (1995) Application of smart classification techniques to non-destructive testing of composites. PhD thesis, University of Warwick.

Islam, M. Anwarul (1978) Optimum design of sway frames. PhD thesis, University of Warwick.

J

Jegede, Oluyemi (2017) Concept design of a thermo-chemical heat pump using calcium chloride-NH₃ and magnesium chloride-NH₃ working pairs. PhD thesis, University of Warwick.

Jones, Andrew Philip Stephen (1992) Design and implementation of linear phase wave digital filters. PhD thesis, University of Warwick.

Judge, Thomas Richard (1992) Quantitative digital image processing in fringe analysis and particle image velocimetry (PIV). PhD thesis, University of Warwick.

K

Khoh, Soo Beng (1996) A conformance test framework for the DeviceNet fieldbus. PhD thesis, University of Warwick.

Kuriger, Ian Frank (1985) Some aspects of modelling and control of automotive power systems. PhD thesis, University of Warwick.

Kubrusly, Carlos Silva (1976) Identification for distributed parameter systems. PhD thesis, University of Warwick.

L

Leftheriotis, George (1992) Development of wind turbines to operate in modified axial flows which contain swirl velocities and non-uniform distributions. PhD thesis, University of Warwick.

Li, Man (1991) Interpretation and evaluation of stylus profiling techniques. PhD thesis, University of Warwick.

Langevelde, Frans van (1991) The Daresbury photon microprobe. PhD thesis, University of Warwick.

Li, Shengcai, 1941- (1990) Cavitation associated low-frequency fluctuation. PhD thesis, University of Warwick.

Lok, Tat Seng (1984) Design of unbraced multi-storey steel frames. PhD thesis, University of Warwick.

Luxton, Hubert Ernest George (1980) Characterisation and application of microwave field effect transistors. PhD thesis, University of Warwick.

M

Matthews, Julian Charles, 1969- (1994) An optimisation study on the control of clutch engagement in an automotive vehicle. PhD thesis, University of Warwick.

Markomichalis, Panayiotis S. (1991) An object oriented approach to automating the product specification concept in the automotive industry. PhD thesis, University of Warwick.

Mohammad, M. T. (1978) Research and development in axial field motors. PhD thesis, University of Warwick.

Marchent, Brian Gerald (1973) Interactive computer programs for the computer aided design of linear microwave circuits. PhD thesis, University of Warwick.

N

Nwufoh, Charles Nnonyelum J. (1992) Performance evaluation and development of a synchro-drive mobile robot. PhD thesis, University of Warwick.

O

Obene, Pufinji Maclean (1990) On the use of time and correlation windows for non-parametric spectral analysis. PhD thesis, University of Warwick.

Onoh, Greg Nwachuku (1982) Meanderline networks incorporating P.I.N. diodes for digital multiplexing applications. PhD thesis, University of Warwick.

P

Papadakis, Nikolaos (2002) Strain rate dependency of the properties of a unidirectional thermoplastic composite material. PhD thesis, University of Warwick.

Patil, Dilip Madhusudan (1995) Feature based computer aided process planning. PhD thesis, University of Warwick.

Partridge, Tony (1994) Self-adaptation and rule generation in a fuzzy system for X-ray rocking curve analysis. PhD thesis, University of Warwick.

Parker, Steve Carl Jamieson (1993) The quantitative analysis of transonic flows by holographic interferometry. PhD thesis, University of Warwick.

Puvanachandran, Vallipuram Malavarayamudali (1982) The viability of British urban transport planning in the post Buchanan period : a systematic study. PhD thesis, University of Warwick.

Pollock, Jennifer C. (1980) Control theory for distributed parameter systems. PhD thesis, University of Warwick.

Parker, Kim T. (1975) Problems in the optimal control of finite and infinite dimensional linear systems. PhD thesis, University of Warwick.

Q

Quan, Chenggen (1992) Quantitative and automatic analysis of interferometric fringe data using carrier fringe and FFT techniques. EngD thesis, University of Warwick.

R

Roerig, Christopher Stuart (1981) The D.C. disc armature traction motor: research into the design and performance of d.c. axial-field machines for use in battery electric traction. PhD thesis, University of Warwick.

S

Searle, Graham Ellis (2002) Dynamic modelling of electronic nose systems. PhD thesis, University of Warwick.

Saim, A. Aziz (1998) Aspects of continuity in steel and composite frames. PhD thesis, University of Warwick.

Shand, Andrew Michael (1996) The investigation, development and optimisation of global laser diagnostics for combustion and related flow applications. PhD thesis, University of Warwick.

Staunton, Richard C. (1991) Visual inspection : image sampling, algorithms and architectures. PhD thesis, University of Warwick.

Shan, Jian, 1946- (1990) Application of the sub-region mixed energy principle to numerical modelling of prestressed clad cable nets. PhD thesis, University of Warwick.

Shaw, Martyn Joseph (1989) Modem design employing real-time channel evaluation. PhD thesis, University of Warwick.

Swaminathan, S. (1985) Characterisation of III-V quaternary multilayer semiconductor device materials by x-ray diffraction. PhD thesis, University of Warwick.

Salter, John Barry (1976) Column behaviour and deflection control in steel frames. PhD thesis, University of Warwick.

T

Tjendana Tjhin, Vindy (2019) Brain iron trafficking in health and disease : a systems approach. EngD thesis, University of Warwick.

Torabi Kachousangi, Ehsanollah (2016) Edge loading effect on total hip replacement. PhD thesis, University of Warwick.

Tsinopoulos, Christos Dimitris (2003) The evolution of drug discovery strategies. PhD thesis, University of Warwick.

Thomas, Alister Julian (1995) Modelling of an automotive natural gas engine for A/F control investigations. PhD thesis, University of Warwick.

Towers, David Peter (1991) The automatic and quantitative analysis of interferometric and optical fringe data. PhD thesis, University of Warwick.

Tam, Chi Hang (1985) Design and development of axial-field air-cored brushless DC motors. PhD thesis, University of Warwick.

Tellett, John (1984) Pocket-type reinforced brickwork retaining walls. PhD thesis, University of Warwick.

V

Vangestel, Bram (2019) Development and validation of a water separation model for AIS (air intake systems) through PEPT experiments. PhD thesis, University of Warwick.

Vowden, Christopher J. (1999) Dynamical behaviour of digital filters subject to 2's complement arithmetic nonlinearity. PhD thesis, University of Warwick.

W

Wan, Tim S. (2021) Mathematical modelling in behavioural and social science. PhD thesis, University of Warwick.

Wong, Yiu-Man (2001) Service-based strategy in the air express industry : executive summary. PhD thesis, University of Warwick.

Winistoerfer, Andreas Urs (1999) Development of non-laminated advanced composite straps for civil engineering applications. PhD thesis, University of Warwick.

Wong, Wai (1992) A formal theory of railway track networks in higher-order logic and its applications in interlocking design. PhD thesis, University of Warwick.

Woolfson, Malcolm Steven (1981) Photoelectron diffraction calculations for adsorbate systems. PhD thesis, University of Warwick.

Y

Yates, James W. T. (2004) Black box and mechanistic modelling of electronic nose systems. PhD thesis, University of Warwick.

Yu, Cheng-Kung (1985) Identification and design of control systems. PhD thesis, University of Warwick.

Z

Zhu, Jian (2002) SPIHT image coding : analysis, improvements and applications. PhD thesis, University of Warwick.

Zolghadr, Farshid (1989) Embedded coding algorithms applicable to time variable channels. PhD thesis, University of Warwick.