Browse by Theses by Department

Sogut, Muhammed (2023) Descriptor-based surrogate model of wind speeds in off-shore wind farms. PhD thesis, University of Warwick.

Agbo, Sunday Nereus Akor (2023) Benchmarking the robustness performance of SiC cascode JFETS against contemporary devices using simulations and experimental measurements. PhD thesis, University of Warwick.

Atkinson, G. H. (2023) Design, manufacture and analysis of a next-generation ammonia-salt resorption heat pump. PhD thesis, University of Warwick.

Anande, Tertsegha J. (2023) Machine learning for network traffic generation and classification. PhD thesis, University of Warwick.

Oronti, Iyabosola Busola (2023) Optimised diagnosis and management of non-communicable diseases for global health using data analytics and artificial intelligence methods. PhD thesis, University of Warwick.

Soliman Khaled, Ahmed (2023) Artificial intelligence methodologies for structural health monitoring of civil engineering structures. PhD thesis, University of Warwick.

Ribera I Armengol, Mar (2023) Modelling and evaluation of interventions to support overactive bladder issues in spinal cord injury subjects. PhD thesis, University of Warwick.

Ma, Yiwei (2023) Static & dynamic stiffness modelling and optimization design methodologies for precision horizontal machine tools. PhD thesis, University of Warwick.

Dejaloud, Hesamoddin (2023) Development and numerical implementation of an adaptive anisotropic soil constitutive modelling framework. PhD thesis, University of Warwick.

Ryland, Michael (2023) Techno-economic optimisation of low-carbon domestic energy technologies and systems. PhD thesis, University of Warwick.

Jin, Cenqin (2023) Advanced modelling and signal processing in nonlinear coherent optical fibre systems. PhD thesis, University of Warwick.

Wratten, Ailish (2023) Nanoscale hafnium oxide passivation for photovoltaic and electronic devices. PhD thesis, University of Warwick.

Turkeri, Cebrail (2023) Control-oriented dynamical modelling and state estimation of centrifugal fans with induction motors drives. PhD thesis, University of Warwick.

Tyagi, Heena (2023) Gas phase biomarkers for disease diagnostics by ion-mobility. PhD thesis, University of Warwick.

Sarmadi, Nima (2023) Controls on the hydraulic fracture propagation across sealing faults and natural fractures : a numerical study. PhD thesis, University of Warwick.

Pain, Sophie L. (2023) Enhancing electronic materials by chemical treatments and nanoscale dielectrics. PhD thesis, University of Warwick.

Zhang, Luyang (2023) High-performance SiC-based power semiconductor devices. PhD thesis, University of Warwick.

Pho, Quoc Hue (2023) A new kind of microplasma for nitrogen-fixation multifunctional nanoparticle synthesis towards selected applications. PhD thesis, University of Warwick.

Liu, Yifan (2023) Design of neural network-based nonlinear equalisers for coherent optical communication systems. PhD thesis, University of Warwick.

Gu, Xueyun (2023) Integrated communications and passive radar designs for wireless communications. PhD thesis, University of Warwick.

Hu, Wenxiu (2023) Optimising signal detection techniques in wireless ultraviolet communication systems. PhD thesis, University of Warwick.

Thornton, Callum John (2023) Modelling and analysis of hand motion in everyday activities with application to prosthetic hand technology. PhD thesis, University of Warwick.

Nair, SreeRaj R. (2022) Overcoming uncertainties in sour natural gas dispersion modelling. PhD thesis, University of Warwick.

Xie, Jingjie (2022) Wind turbine and farm control via reinforcement learning. PhD thesis, University of Warwick.

Brixey, James (2022) Multiscale modelling of crack propagation in diamond. PhD thesis, University of Warwick.

Cheng, Zhanbo (2022) Investigation of soil stabilize and strengthening by using biopolymer. PhD thesis, University of Warwick.

Ye, Youjie (2022) Machine learning for signal detection and estimation in wireless communications. PhD thesis, University of Warwick.

Eyriay, Iuliia (2022) Synthesis and analysis of biomolecular circuits using DNA strand displacement. PhD thesis, University of Warwick.

Al-Qahtani, Dokhyl (2022) Analysis and optimisation in wireless energy harvesting networks. PhD thesis, University of Warwick.

Williams, Hollis (2022) Effect of ambient gas on cavity formation for sphere impacts on liquids. PhD thesis, University of Warwick.

Jeerh, Georgina (2022) Material and design optimisation of low temperature direct ammonia fuel cells. PhD thesis, University of Warwick.

Oztekin, Merve (2022) Nonlinear optimal control of interior permanent magnet synchronous motors for electric vehicles. PhD thesis, University of Warwick.

Ayyala, Sai Kiran (2022) Enhancing metal oxide-based gas sensors for the detection of VOCs. PhD thesis, University of Warwick.

Perry, Sean (2022) Cardiorespiratory and cardiolocomotive synchronization in spontaneous and guided protocols. PhD thesis, University of Warwick.

King, Marcus (2022) Compressed air energy storage and its application in solar photovoltaic efficiency improvement. PhD thesis, University of Warwick.

Rebane, Martin (2022) Object detection for collision avoidance from lidar point clouds. PhD thesis, University of Warwick.

Zengeya, Patrick (2022) An investigation into the effects of mould temperature on injection moulded HDPE gear performance. PhD thesis, University of Warwick.

Wheatley, Joseph (2022) Engineering bacteriophage K1F to develop a novel point-of-care Escherichia coli K1F detection system. PhD thesis, University of Warwick.

Liyanagedera, Sahan B. W. (2022) Optimisation of cell-free transcription/translation systems for phage therapy. PhD thesis, University of Warwick.

Wride, Natalie (2022) Analysis of cohesive subgrade subject to long term cyclic loading. PhD thesis, University of Warwick.

Zhu, Jiajing (2022) Investigation of mechanical properties of cancerous cells based on atomic force microscope. PhD thesis, University of Warwick.

Griffiths, Elliott R. (2022) Methods, strategies and applications for direct hybrid additive manufacture of embedded sensors. PhD thesis, University of Warwick.

Bishop, Elizabeth G. (2022) Techniques and technologies for large-scale additive manufacturing. PhD thesis, University of Warwick.

Hinmers, Samuel John (2022) Design of a resorption transformer to upgrade industrial waste heat. PhD thesis, University of Warwick.

Baker, Guy (2022) Design, simulation and analysis of 4H-SiC superjunction structures. PhD thesis, University of Warwick.

Zitoun, Akram (2022) Magnetostrictive patches for guided wave inspection of composites. PhD thesis, University of Warwick.

Specht, Jan Peter (2022) Thermally modulated solidly mounted resonators for air quality monitoring. PhD thesis, University of Warwick.

Wanika, Linda (2022) Analysis of drug induced interstitial lung disease in non-small cell lung cancer through modelling and simulation. PhD thesis, University of Warwick.

Bucknall, Alex R. (2022) Build framework and runtime abstraction for partial reconfiguration on FPGA SoCs. PhD thesis, University of Warwick.

Riazifar, Negar (2022) Efficient level crossing sampling for high-fidelity, alias-free analogue-to-digital conversion. PhD thesis, University of Warwick.

Yong, Ching Kiat (2022) Evaluation of laser shock peen additive manufacture inconel 718 for high temperature applications. EngD thesis, University of Warwick.

Luo, Jierong (2022) Quantifying iron in the brain using magnetic resonance imaging. PhD thesis, University of Warwick.

Pointon, Alex Ivan (2022) Superacid-based passivation for accurate measurements of bulk carrier lifetime in silicon wafers. PhD thesis, University of Warwick.

Traynor, Carlos (2021) Analysing clinical data for real-world evidence generation in oncology. PhD thesis, University of Warwick.

Federici, Carlo Baldassarre (2021) Early assessment of medical technologies : addressing uncertainty to inform good decisions. PhD thesis, University of Warwick.

Baioni, Elisa (2021) Modeling solute transport and mixing in porous media under turbulent flow conditions : application to the hyporheic zone. PhD thesis, University of Warwick.

Al-Nabulsi, Zeina (2021) Characterization of steel components printed using WAAM technology. PhD thesis, University of Warwick.

Ioannou, Lenos (2021) Exploring the capabilities of FPGA DSP blocks in neural network accelerators. PhD thesis, University of Warwick.

Piaggio, Davide (2021) Design of medical devices resilient to low-resource settings : from the regulatory framework to the actual design phase. PhD thesis, University of Warwick.

Renz, Arne Benjamin (2021) Development of Schottky and MOS interfaces for SiC power devices. PhD thesis, University of Warwick.

Chen, Shigang (2021) Novel electrolytes for high-voltage and high-stability aqueous rechargeable batteries. PhD thesis, University of Warwick.

Astolfi, Lorenzo (2021) Ultrasonic metamaterials for use in water. PhD thesis, University of Warwick.

Kirya, Mark Patrick (2021) Using virtual experiences to facilitate refugees' integration in third countries. PhD thesis, University of Warwick.

Wicaksono, Alfian (2021) Diagnosis of human disease by odour analysis employing machine learning. PhD thesis, University of Warwick.

Zhao, Huan (2021) Investigations of fast quality prediction and rivet/die optimization for self-piercing riveting joints. PhD thesis, University of Warwick.

Liu, Yunpeng (2021) Numerical and experimental investigations of self-piercing riveting (SPR) and riv-bonding joints. PhD thesis, University of Warwick.

Chamberlain, Thomas William (2021) Oxidation of biomass-derived chemicals over redox active metalorganic frameworks. PhD thesis, University of Warwick.

Yan, Hua (2021) UAV-enabled wireless power transfer and communications. PhD thesis, University of Warwick.

Paulino, Nuno Miguel Gomes (2021) Design and analysis of DNA controllers. PhD thesis, University of Warwick.

Chen, Xue (2021) Uniform-momentum zones and coherent structures in Newtonian and non-Newtonian pipe flows. PhD thesis, University of Warwick.

Hall, Matthew L. (2021) 3D localisation of mosquitoes using digital holography over an extended field of view. PhD thesis, University of Warwick.

Zhang, Jincheng (2021) Machine learning based modelling and control of wind turbine structures and wind farm wakes. PhD thesis, University of Warwick.

Pamuncak, Arya Panji (2021) Deep learning for structural health monitoring. PhD thesis, University of Warwick.

Guo, Songshan (2021) Development of methodology and test platform for local energy system analysis and optimal operation. PhD thesis, University of Warwick.

Amato, Silvio (2021) Inspection of composite aerospace structures using capacitive imaging and guided waves. PhD thesis, University of Warwick.

Li, Juan (2021) Modelling and load alleviation control of large and flexible wind turbines with smart rotors. PhD thesis, University of Warwick.

Zhang, Yixin (2021) Nanoscale interfacial flows with thermal fluctuations and slip. PhD thesis, University of Warwick.

Umar, Al-Amin Barambu (2021) Non-line of sight underwater optical wireless communications. PhD thesis, University of Warwick.

Mifsud, Jacqueline (2021) CFD modelling of an acoustically driven gas bubble in confinement. PhD thesis, University of Warwick.

Guo, Xuan (2021) SiC power electronic devices evaluation and magnetic components design in wind power system. PhD thesis, University of Warwick.

Khuwaja, Aziz Altaf (2021) Unmanned aerial vehicles (UAVs) for wireless communication and networks : potentials and design challenges. PhD thesis, University of Warwick.

Xu, Xingguang (2021) Data aspects in the reinforcement of polymer gears manufactured by injection moulding. PhD thesis, University of Warwick.

Rajan, Surya (2021) Advancing diffusion tensor image analysis and Interpretation for clinical application. PhD thesis, University of Warwick.

Yu, Zhuonan (2021) Developing force measurement techniques for cell mechanics and contractility in ageing dermal fibroblasts. PhD thesis, University of Warwick.

Liu, Lidong (2021) Experimental and theoretical study of capillary force in adhesive contact between microspheres. PhD thesis, University of Warwick.

Jones, Geraint Rhys (2021) GaN-on-Si pressure, flow, and thermal conductivity sensors for harsh environments. PhD thesis, University of Warwick.

Hu, Borong (2021) Uneven degradation and condition monitoring of multi-chip power modules for wind turbines. PhD thesis, University of Warwick.

Chao, Zhiming (2021) Physical performance of clayey soil geocomposite drainage layer interfaces subjected to environmental loadings. PhD thesis, University of Warwick.

Sawant, Alok (2021) Solid particle erosion modelling using CFD techniques. PhD thesis, University of Warwick.

Ma, Guotao (2021) Probabilistic analysis of post-failure behavior of landslides using stochastic material point method. PhD thesis, University of Warwick.

Wei, Zhuangkun (2020) Sampling of time-varying network signals from equation-driven to data-driven techniques. PhD thesis, University of Warwick.

Abbaszadeh, Mahmoud (2020) Experimental and computational study of molecular communication in turbulent fluid environments. PhD thesis, University of Warwick.

Eichenlaub, Manuel Max Werner (2020) Mathematical modelling of blood glucose dynamics in normal and impaired glucose tolerance. PhD thesis, University of Warwick.

Brooks, Jake (2020) Advancing synchrotron spectromicroscopy to investigate metal dysregulation in neurodegenerative disorders. PhD thesis, University of Warwick.

Cooke, Ryan A. (2020) Modelling and characterisation of distributed hardware acceleration. PhD thesis, University of Warwick.

Wei, Xing (2020) Vibration suppression of large and flexible offshore wind turbine. PhD thesis, University of Warwick.

Elghorab, Mohamed Ahmed Mohamed (2020) Numerical analysis for active control of drag over flat plate using sinusoidal travelling wave method. PhD thesis, University of Warwick.

Dunstan, Samuel David (2020) DNS of convective rotational turbulence in the pipe, concentric pipe and jet. PhD thesis, University of Warwick.

Chakraborty, Dhritiman (2020) Phonon transport simulations in hierarchical and highly disordered nanostructures. PhD thesis, University of Warwick.

Saffaran, Sina (2020) Computational simulation of novel treatment strategies for critical lung disease in adults, children and neonates. PhD thesis, University of Warwick.

Qamar, Furqan (2020) Utilisation of natural fibrous plaster for out-of-plane lateral resistance of masonry walling. PhD thesis, University of Warwick.

Tucker Harvey, S, (2020) A bio-mimicking aeroelastic energy harvester. PhD thesis, University of Warwick.

Falconer, Benedict Peter (2020) A system for remotely taking high velocity, large scale, PIV measurements in a hostile environment. PhD thesis, University of Warwick.

Zhao, Chengxi (2020) Fluctuating hydrodynamics of nanoscale interfacial flows. PhD thesis, University of Warwick.

Porumb, Mihaela (2020) Deep learning for electrocardiogram analysis applied to health monitoring applications. PhD thesis, University of Warwick.

Zhang, Ye (2020) Intelligent manufacturing applied to additive manufactured polymer gears. PhD thesis, University of Warwick.

Salauddin, Md (2020) Wave overtopping and toe scouring at sea defences with permeable shingle foreshores : a physical model study. PhD thesis, University of Warwick.

Bashar, E. (2020) A fast-acting protection scheme for series compensators in a medium-voltage network. PhD thesis, University of Warwick.

Qi, Pengyuan (2019) Flight control of very flexible unmanned aerial vehicles. PhD thesis, University of Warwick.

Xing, Yuxin (2019) Micro-hotplate based CMOS sensor for smart gas and odour detection. PhD thesis, University of Warwick.

Oozeerally, Ryan (2019) Zeolite and metal-organic framework catalysts for the production of value added platform molecules from biomass derived carbohydrates. PhD thesis, University of Warwick.

Li, Decai (2019) Study of thermal power plant flexible operation via integration of thermal and compressed air energy storage. PhD thesis, University of Warwick.

Longbottom, Sarah (2019) Uncertainty quantification for classical effective potentials. PhD thesis, University of Warwick.

Brons, Jonathan A. (2019) On the transition from two- to three-dimensional turbulence in the presence of background rotation. PhD thesis, University of Warwick.

Foster, Samuel (2019) Electronic transport simulations of thermoelectric nanostructures. PhD thesis, University of Warwick.

Bonyadi, Yeganeh (2019) Fabrication and analysis of 4H-SiC diodes. PhD thesis, University of Warwick.

Makri, Stela (2019) Accelerating minimum energy path finding method. PhD thesis, University of Warwick.

Atkinson, James A. (2019) Analysis of facial and body feature point trajectories for automatic affect recognition. PhD thesis, University of Warwick.

Gherman, Julia (2019) Engineering stress resilient plants using gene regulatory network rewiring. PhD thesis, University of Warwick.

Patel, Punit (2019) Nonlinear methods for modelling atomistic brittle fracture. PhD thesis, University of Warwick.

Dong, Shudi (2019) The impacts of geometrical configuration changes in wave overtopping reduction, spatial distribution and loadings. PhD thesis, University of Warwick.

Montesinos-Silva, Luis (2019) Ageing and sleep in human balance and falls: the role of wearable sensors and nonlinear signal analysis. PhD thesis, University of Warwick.

Zhou, Yulin (2019) Performance analysis of energy harvesting relaying. PhD thesis, University of Warwick.

Carter, Simon J. (2019) Mechanistic modelling of in vitro transporter processes to improve drug-drug interaction predictions. PhD thesis, University of Warwick.

Marnerides, Demetris (2019) Deep learning for high dynamic range imaging. PhD thesis, University of Warwick.

Piho, Laura (2019) Signal processing and machine learning methods with applications in EEG-based emotion recognition. PhD thesis, University of Warwick.

Sari, Wangi P. (2019) Deposition of metal oxide based film for gas sensor applications. PhD thesis, University of Warwick.

Mohamad, Ahmad Johari (2019) The influence of metallic surface topography towards adhesion of gram-positive & gram-negative bacteria. PhD thesis, University of Warwick.

Agbroko, Samuel O. (2019) A low cost gas phase analysis system for the diagnosis of bacterial infection. PhD thesis, University of Warwick.

Sirilapanan, Vasit (2019) Numerical study on patient-specific haemodynamics subjected to embolisation and wall-distensibility. PhD thesis, University of Warwick.

Humphreys, John (2019) The development of water and oxygen tolerant catalysts for ammonia synthesis. PhD thesis, University of Warwick.

Bae, Jaehoon (2019) Seismic design and assessment of resilient steel frames with visco-plastic dampers. PhD thesis, University of Warwick.

Gadd, Charles W. L. (2018) Probabilistic Modelling of Uncertainty with Bayesian nonparametric Machine Learning. PhD thesis, University of Warwick.

Lin, Shuyue (2018) Control of the offshore wind turbine and its grid integration. PhD thesis, University of Warwick.

Vavasour, Oliver (2018) Dielectrics for narrow bandgap III-V devices. PhD thesis, University of Warwick.

Wu, Ruizhu (2018) Improve the Flexibility of Power Distribution Network by Using Back-to-back Voltage Source Converter. PhD thesis, University of Warwick.

Dai, Tianxiang (2018) Design, simulation and fabrication of 4H-SiC Power MOSFETs. PhD thesis, University of Warwick.

Shao, Baohua (2018) Predictive smart relaying schemes for decentralized wireless systems. PhD thesis, University of Warwick.

Zhu, Yanjie (2018) Temperature-Driven Anomaly Detection Methods for Structural Health Monitoring. PhD thesis, University of Warwick.

Davletzhanova, Zarina (2018) Electrothermal simulation and characterisation of series connected power devices and converter applications. PhD thesis, University of Warwick.

Gironacci, Elia (2018) Numerical modelling of crack propagation in quasi-brittle heterogeneous materials : a stochastic approach. PhD thesis, University of Warwick.

Mohammadi, Zohreh (2018) Design, simulation, fabrication and characterisation of 4H-SiC trench MOSFETs. PhD thesis, University of Warwick.

Jesus, André H. (2018) Modular Bayesian uncertainty assessment for structural health monitoring. PhD thesis, University of Warwick.

Jimoh, Bashir O. (2018) Phase change material optimized for integration with domestic heat pump. PhD thesis, University of Warwick.

Chan, Chun Wa (2018) Design, simulation and analysis of RESURF Si/SiC power LDMOSFETs. PhD thesis, University of Warwick.

Sikic, Ivan (2018) Radiative heat transfer for modelling fire and fire suppression. PhD thesis, University of Warwick.

Huang, Xiameng (2018) Strategic placement of viscous dampers in steel buildings under strong earthquake ground motions. PhD thesis, University of Warwick.

Darlington, Alexander P. S. (2018) Design of genetic controllers to manage translational resource allocation in synthetic gene networks. PhD thesis, University of Warwick.

Esfahani, Siavash (2018) Electronic nose implementation for biomedical applications. PhD thesis, University of Warwick.

Triantafyllidis, Vasileios (2018) High-dimensional-output surrogate models for uncertainty and sensitivity analyses. PhD thesis, University of Warwick.

Seniya, Chandrabhan (2018) A flexible low-cost quantitative phase imaging microscopy system for label-free imaging of multi-cellular biological samples. PhD thesis, University of Warwick.

Alharbi, Khalid Abdulkhaliq M. (2018) The mechanical contact behaviour and tribology of polymer gears. PhD thesis, University of Warwick.

Du, Dongwei (2018) Development of advanced electrode materials for high-performance supercapacitors. PhD thesis, University of Warwick.

Bowyer, Jack E. (2018) Mechanistic mathematical models for the design of synthetic biological systems : DNA recombination, recombinase-based temporal logic gates and antibiotic production. PhD thesis, University of Warwick.

Kendrick, Felicity (2018) Modelling immunoglobulin metabolism and its effect on prognostic utility in multiple myeloma. PhD thesis, University of Warwick.

Yang, Bowen (2018) Numerical modelling of tunnelling in sand using a state parameter constitutive model. PhD thesis, University of Warwick.

Gunes, Nurhan (2018) The design and analysis of quartic double well potential with stochastic resonance for communication systems. PhD thesis, University of Warwick.

Atthanayake, Iresha (2018) Behaviour of an axi-symmetric jet in the rotating reference frame. PhD thesis, University of Warwick.

Espley-Jones, Robert (2018) Enhanced absorption of infrared radiation in semiconductor photodetectors using micro-antenna arrays. PhD thesis, University of Warwick.

Castaldo, Rossana (2018) Monitoring cardiovascular and autonomic response in real-life settings. PhD thesis, University of Warwick.

Shaikhina, Torgyn (2017) Machine learning with limited information : risk stratification and predictive modelling for clinical applications. PhD thesis, University of Warwick.

Villa-López, Farah Helue (2017) CMOS compatible solidly mounted resonator for air quality monitoring. PhD thesis, University of Warwick.

Tong, Xin (2017) Control of large offshore wind turbines. PhD thesis, University of Warwick.

Hu, Guannan (2017) Development of a methanol to hydrocarbons process over zeolite coatings in a microstructured reactor. PhD thesis, University of Warwick.

Kariniotakis, Konstantinos (2017) Seismic design procedure for steel moment resisting frames with viscous dampers. PhD thesis, University of Warwick.

Wang, Zhixin (2017) Direct numerical simulations of turbulent pipe flow with 90° bends. PhD thesis, University of Warwick.

Ridley, G. K. (2017) Application of EL CID to salient-pole electrical machines. PhD thesis, University of Warwick.

Qin, Han (2017) Network fault analysis with increased distributed generation penetration and evaluation of solutions to issues caused by distributed generation. PhD thesis, University of Warwick.

Rong, Zhichao (2017) Terahertz communications at the nanoscale. PhD thesis, University of Warwick.

Hu, Zedong (2017) An investigation into the wear and thermal-mechanical performance of polyacetal gears. PhD thesis, University of Warwick.

Du Lac, Melchior (2017) Modelling and simulation of heterogeneous growth dynamics in bacterial populations using a novel multiphasic growth method. PhD thesis, University of Warwick.

Al-Amin, Mohammad (2017) Low-temperature gettering in multicrystalline silicon materials for photovoltaics. PhD thesis, University of Warwick.

Somerville, Limhi (2017) Post-mortem analysis of lithium-ion cells after accelerated lifetime testing. EngD thesis, University of Warwick.

Ortiz Gonzalez, Jose Angel (2017) Electrothermal characterisation of silicon and silicon carbide power devices for condition monitoring. PhD thesis, University of Warwick.

Abd, Akram Hasan (2017) Geosynthetic-reinforced and unreinforced soil slopes subject to cracks and seismic action : stability assessment and engineered slopes. PhD thesis, University of Warwick.

Qiu, Song (2017) Molecular communication systems : design, modelling and experimentation. PhD thesis, University of Warwick.

Konaklieva, Syliva (2017) Power module condition monitoring for offshore wind applications with focus on the die attach degradation. PhD thesis, University of Warwick.

Alexakis, Petros (2017) Reliability of wide bandgap semiconductor devices under unconventional mode conduction. PhD thesis, University of Warwick.

Mupambireyi, Ushindibaba (2017) Modelling, analysis and control of multi-phase electronically commutated DC machines : an enabling topology for DC converter fed networks. PhD thesis, University of Warwick.

Niu, Hui (2017) Quantifying the touch feel perception : tribological aspects. PhD thesis, University of Warwick.

Ioannidou, Vasiliki (2017) Solute mixing in full-scale constructed wetlands: seasonal variation of vegetation & hydraulic performance. PhD thesis, University of Warwick.

Liao, Yangzhe (2017) System design and performance analysis of wireless body area networks. PhD thesis, University of Warwick.

Vincent, Timothy A. (2017) Development of a handheld breath analyser for the monitoring of energy expenditure. PhD thesis, University of Warwick.

Trägårdh, Magnus (2017) Input estimation in nonlinear dynamical systems for drug-discovery applications. PhD thesis, University of Warwick.

Ghadar, Arash (2017) An optical biosensor and immunoassay framework suitable for on-site measurement of progesterone concentration in bovine milk. PhD thesis, University of Warwick.

Ismail, Mohd Anuar Bin (2017) Development and characterisation of next generation stylus for micro coordinate measuring machine. PhD thesis, University of Warwick.

Song, Junfeng (2017) Surface and topography metrology in firearm evidence identification and engineering surface quality control. PhD thesis, University of Warwick.

Liu, Yawen (2017) Development of a continuous process for direct amide synthesis over titania based magnetic catalysts under RF heating. PhD thesis, University of Warwick.

Suwaed, Ahmed (2017) Development of novel demountable shear connectors for precast steel-concrete composite bridges. PhD thesis, University of Warwick.

Bergenholm, Linnéa (2017) Predicting QRS and PR interval prolongations in humans using nonclinical data. PhD thesis, University of Warwick.

Voulgari, Chrysoula (2017) Engineering modelling of the progressive retreat of cliffs. PhD thesis, University of Warwick.

Cant, Edward J. (2017) Development of novel functional and degradable materials for use in microstereolithography. PhD thesis, University of Warwick.

Andersson, Karl Robert (2017) Dose-response-time data analysis. PhD thesis, University of Warwick.

Ahuja, Vishwajeet (2017) Non-destructive approach for sprayed concrete lining strength monitoring. PhD thesis, University of Warwick.

Thomas, Sanju (2017) Towards a cell-based chemo receiver for artificial insect olfaction. PhD thesis, University of Warwick.

Laureti, Stefano (2016) Acoustic metamaterials for medical ultrasound and non-destructive evaluation. PhD thesis, University of Warwick.

Janzén, David (2016) Structural identifiability and indistinguishability in mixed-effects models. PhD thesis, University of Warwick.

Zhang, Yan (2016) Variational Bayesian data driven modelling for biomedical systems. PhD thesis, University of Warwick.

Kamperidis, Vasileios C. (2016) Novel damage-free self-centering column base connection for earthquake-resilient steel buildings. PhD thesis, University of Warwick.

Khaliji Oskouei, Mohammadhasan (2016) Thermodynamic and heat transfer analysis of an activated carbon-R723 adsorption system. PhD thesis, University of Warwick.

Mutalip, Zaiton Abdul (2016) Investigation of optical wireless for employment within a vehicular environment. PhD thesis, University of Warwick.

Ozkan, Musa (2016) Boundary layer transition over rotating disks. PhD thesis, University of Warwick.

Rutolo, Massimo (2016) Detection of potato storage disease by gas analysis. PhD thesis, University of Warwick.

Jin, Tianrong (2016) Developing force measurement techniques for cell mechanics and adhesion. PhD thesis, University of Warwick.

Lu, Yi (2016) Error correction codes for molecular communication systems. PhD thesis, University of Warwick.

Li, Fan (2016) Fabrication and characterisation of 3C-SiC on Si semiconductor devices. PhD thesis, University of Warwick.

Azmat, Freeha (2016) Machine learning and energy efficient cognitive radio. PhD thesis, University of Warwick.

Wang, Zhongnan (2016) Tribological investigation for next-generation polymeric micro-systems. PhD thesis, University of Warwick.

Westenbrink, Eric W. (2016) Electronic nose technology as a point-of-care solution for the detection of colorectal cancer. PhD thesis, University of Warwick.

Hu, Ji (2016) Finite element electrothermal modelling and characterization of single and parallel connected power devices. PhD thesis, University of Warwick.

Xing, Wei (2016) Manifold learning for emulations of computer models. PhD thesis, University of Warwick.

Jaitman, Abigail (2016) Multi-segment foot modelling to enable an understanding of altered gait in diabetes. PhD thesis, University of Warwick.

Sawlekar, Rucha (2016) Programming dynamic nonlinear biomolecular devices using DNA strand displacement reactions. PhD thesis, University of Warwick.

Bonyadi, Roozbeh (2016) Reliability assessment and modelling of power electronic devices for automotive application and design. PhD thesis, University of Warwick.

Yuan, Hu (2016) Device-to-device communication in cellular networks : multi-hop path selection and performance. PhD thesis, University of Warwick.

Fan, Xijian (2016) Spatio-temporal framework on facial expression recognition. PhD thesis, University of Warwick.

Mohamed, Ikhsan (2016) Sub-MHz ultrasound for thick section and high attenuation materials. PhD thesis, University of Warwick.

Dimopoulos, Athanasios I. (2016) Seismic design and assessment of resilient post-tensioned steel frames with viscous dampers. PhD thesis, University of Warwick.

Bai, Chenyao (2016) Error control in bacterial quorum communications. PhD thesis, University of Warwick.

Pournaghshband, Asal (2016) Form-finding of arch structures. PhD thesis, University of Warwick.

Boger, Elin (2016) Lung-targeted receptor occupancy by drug inhalation : an experimental and computational evaluation. PhD thesis, University of Warwick.

Krupke, Christopher (2016) Study on a hybrid wind turbine system with Intrinsic compressed air energy storage provision. PhD thesis, University of Warwick.

Yang, Qiang (2016) Turbulent skin-friction drag reduction control by spanwise motion. PhD thesis, University of Warwick.

Handy, Peter James (2016) The characterisation, modelling and detection of series arc faults in aircraft electrical power distribution systems featuring solid state power controllers (SSPCs). PhD thesis, University of Warwick.

Gale, Stuart M. (2016) A discrete model for patterning of tensile fabric structures. PhD thesis, University of Warwick.

Rihawi, Zeina (2016) Optical wireless channel characterisation in guided structures (vehicle applications). PhD thesis, University of Warwick.

Tan, Benedict Chuan-Wei (2016) An experimental study on the entry of spheres into a two-layer system of immiscible liquids. PhD thesis, University of Warwick.

Wang, Yue (2016) Modelling and simulation study of IGCC power plant with activated carbon-based carbon capture process. PhD thesis, University of Warwick.

Jahdi, Saeed (2016) Analysis of dynamic performance and robustness of silicon and SiC power electronics devices. PhD thesis, University of Warwick.

Dooner, Mark (2016) Modelling, real-time simulation and control of automotive windscreen wiper systems for electronic control unit development. PhD thesis, University of Warwick.

Wang, Xiayang (2016) The design and performance analysis of diffusive molecular communication systems. PhD thesis, University of Warwick.

Jasman, Faezah (2016) Modelling and characterisation of short range underwater optical wireless communication channels. PhD thesis, University of Warwick.

Rong, Hua (2015) Development of 4H-SiC power MOSFETs for high voltage applications. PhD thesis, University of Warwick.

Zhu, Xinyao (2015) Effect of surface adhesion in contact : application of Johnson-Kendall-Roberts model of nanoindentation. PhD thesis, University of Warwick.

McDonald, Madison G. (2015) Experimental characterisation of jumping and bobbing actions for individuals and small groups. PhD thesis, University of Warwick.

Althagafy, Khalid Thamer (2015) Modeling of probe-surface interactions in nanotopographic measurements. PhD thesis, University of Warwick.

Yuan, Tang (2015) Modular multilevel converter : submodule dimensioning, testing method, and topology innovation. PhD thesis, University of Warwick.

Akanji, Omololu (2015) Sound bullets from nonlinear granular chains. PhD thesis, University of Warwick.

Stephenson, David (2015) Design and simulation of nanofluidic branching betworks. PhD thesis, University of Warwick.

Johnson, Laura J. (2015) Optical property variability in the underwater optical wireless channel. PhD thesis, University of Warwick.

Draganescu, Mihai G. (2015) Study of supercritical coal-fired power plant dynamic responses and control for grid code compliance. PhD thesis, University of Warwick.

Oyinlola, Muyiwa Adeyinka (2015) Heat transfer in solar absorber plates with micro-channels. PhD thesis, University of Warwick.

Guo, Shen (2015) Model based analysis of power plant integrated with a post combustion carbon capture process. PhD thesis, University of Warwick.

Jimoh, Moduple O. (2015) Solute mixing due to square manholes. PhD thesis, University of Warwick.

Holland, David M. (2015) Nano-scale computational fluid dynamics with molecular dynamics pre-simulations. PhD thesis, University of Warwick.

Zhang, Yuning (2015) Bubble dynamics under dual-frequency acoustic excitation. PhD thesis, University of Warwick.

Liu, Hao (2015) Energy saving through voltage optimisation & non-intrusive load monitoring in domestic house. PhD thesis, University of Warwick.

Du, Hao (2015) Optical wireless MIMO communication. PhD thesis, University of Warwick.

Shen, Huiping (2015) MBE growth and characterization of lattice mismatched III-Antimonide semiconductors. PhD thesis, University of Warwick.

Khalifa, Abdalla (2015) Processing and characterisation of cementitious materials reinforced with fibres. PhD thesis, University of Warwick.

Khador, Majd (2015) Cyclic behaviour of external diaphragm joint between steel I-section beam and circular hollow section column. PhD thesis, University of Warwick.

Patronis, Alexander (2015) Efficient simulation of internal multiscale gas flows. PhD thesis, University of Warwick.

Spina, Sandro (2015) Graph-based segmentation and scene understanding for context-free point clouds. PhD thesis, University of Warwick.

Bugeja, Keith (2015) High-fidelity graphics using unconventional distributed rendering approaches. PhD thesis, University of Warwick.

Nam, Choong Hyun (2015) Overhead labour and skill-biased technological change : the role of product diversification. PhD thesis, University of Warwick.

Bishop, Andrew C. (2015) Surfactant entrapment in the wake behind an oil droplet rising in an aqueous medium. PhD thesis, University of Warwick.

Watson, Edmund M. (2014) Modelling endocrine regulation of glycaemic control in animal models of diabetes. PhD thesis, University of Warwick.

Wang, Lei (Researcher in engineering) (2014) Study on the characterization of mechanical properties of viscoelastic-plastic materials by nanoindentation. PhD thesis, University of Warwick.

Spillmann, Thorsten S. (2014) The performance and properties of novel desiccant coated heat exchange surfaces for solar air conditioning. PhD thesis, University of Warwick.

Rashid, Haroon Ur (2014) Modelling, implementation and validation of polymeric planar spring mechanisms. PhD thesis, University of Warwick.

Alsebae, Alaa (2014) Network coding for computer networking. PhD thesis, University of Warwick.

Bastin, Matthew (2014) An investigation into the effects of hybrid electric vehicle power-trains on ride and handling. PhD thesis, University of Warwick.

Plaza, Dorota (2014) Continuous flow processes for catalytic upgrading of biofeedstocks. PhD thesis, University of Warwick.

Wang, Kezhi (2014) Performance analysis for cooperative wireless communications. PhD thesis, University of Warwick.

Matharu, Navroop S. (2014) Aspects of bolted connections in pultruded fibre reinforced polymer structures. PhD thesis, University of Warwick.

McMurran, Ross (2014) Design for robustness of complex automotive electronic systems. PhD thesis, University of Warwick.

Mo, Yuen Kwan (2014) Deterministic ethernet in a safety critical environment. PhD thesis, University of Warwick.

Li, Ang (2014) 3D computer vision : passive depth from defocus and manifold learning-based human activity recognition. PhD thesis, University of Warwick.

Chen, Ting (Researcher in engineering) (2014) First step of verification of Li's hypothesis : identification of a new vortex structure induced by guide-plate in Three Gorges turbines. PhD thesis, University of Warwick.

Đặng, Hiệp Vũ (2014) Experimental and numerical modelling of walking locomotion on vertically vibrating low-frequency structures. PhD thesis, University of Warwick.

Khan, Atif A. (2014) Intelligent data analysis for pattern recognition and medical diagnosis of ageing spine. PhD thesis, University of Warwick.

Warnett, Jason M. (2014) Stationary and rotational axisymmetric granular column collapse. PhD thesis, University of Warwick.

Nguyen, T. T. (Tien Thuy) (2014) Lateral-torsional buckling resistance of pultruded fibre reinforced polymer shapes. PhD thesis, University of Warwick.

Rivero Pacho, Angeles M. (2014) Thermodynamic and heat transfer analysis of a carbon – ammonia adsorption heat pump. PhD thesis, University of Warwick.

Vijay, Arnesh (2014) Radio on visible light (RoVL) : an investigative study on the methods & techniques for the transmission of mobile signals through visible light channels. PhD thesis, University of Warwick.

Hover, Eyre D. (2014) The investigation of tube sampling disturbance using transparent soil and particle image velocimetry. PhD thesis, University of Warwick.

Fisher, Craig A. (2014) Development of 4H-SiC PiN diodes for high voltage applications. PhD thesis, University of Warwick.

Siamantouras, Eleftherios (2014) Nanomechanical investigation of soft biological cell adhesion using atomic force microscopy. PhD thesis, University of Warwick.

Shi, Rui (Researcher in engineering) (2014) Performance analysis of cooperative relaying networks. PhD thesis, University of Warwick.

Rahman, Syed S. (2014) Data fusion for human intelligence and crisis management : handling information from untrusted sources. PhD thesis, University of Warwick.

Taramonli, Chryssanthi (2014) Energy conscious adaptive security. PhD thesis, University of Warwick.

Sharma, Sanjeev (2014) Sandwich steels for crash energy absorption applications. PhD thesis, University of Warwick.

Yu, Xiang (Researcher in engineering) (2013) Urban VANET performance optimization. PhD thesis, University of Warwick.

Finnegan, Mary E. (2013) Investigation of the relationship between iron and high field MRI in healthy and Alzheimer's disease tissue. PhD thesis, University of Warwick.

Ghaffari, Reza (2013) Non-destructive detection of diseases using plant emitted volatiles. PhD thesis, University of Warwick.

Cosseddu, Salvatore M. (2013) Structure and dynamics of protein in the permeation and gating of potassium ion channels : identifying molecular determinants and developing coarse-grained approaches. PhD thesis, University of Warwick.

Das Choudhury, Sruti (2013) Uniscale and multiscale gait recognition in realistic scenario. PhD thesis, University of Warwick.

Betts, Benjamin W. (2013) Changing the model of workplace e-learning : a platform to facilitate autonomous social e-learning for adult learners : Innovation report. EngD thesis, University of Warwick.

Grandjean, Thomas R. B. (2013) Mathematical modelling of transporter kinetics. PhD thesis, University of Warwick.

Ahmad, Zahir Uddin (2013) Underwater optical wireless sensor network. PhD thesis, University of Warwick.

El. Yakzan, Adnan (2013) Performance prediction, parameter selection, and channel adaptation in the line-of-sight outdoors optical wireless channels using intelligent systems. PhD thesis, University of Warwick.

Harris, Joseph H. (2013) Stability of the flow over a rough, rotating disk. PhD thesis, University of Warwick.

Suberu, John O. (2013) Analysis of plant materials for molecules of pharmaceutical importance. PhD thesis, University of Warwick.

Lillington, Richard (2013) Fuel system characterization : an investigation into the effects associated with the manufacturing and testing of precision fuel system components. PhD thesis, University of Warwick.

Chen, Ching-Hsien (2013) Tools for developing continuous-flow micro-mixer : numerical simulation of transitional flow in micro geometries and a quantitative technique for extracting dynamic information from micro-bubble images. PhD thesis, University of Warwick.

Zhang, Guanhua, (Researcher in engineering) (2013) Fabrication, characterization and thermo-physical properties of micro- and nano- scaled phase change materials for thermal energy storage. PhD thesis, University of Warwick.

McDonnell, Ian (Researcher in engineering) (2013) Object segmentation from low depth of field images and video sequences. PhD thesis, University of Warwick.

Ali, Murat (2013) Computational and theoretical contact modelling of hip implant devices with the application of wear simulations. PhD thesis, University of Warwick.

Bin Raja Ahsan Shah, Raja Mazuir (2013) Development of a 4WD vehicle powertrain system model for driveability investigation. PhD thesis, University of Warwick.

Qaddoum, Kefaya (2013) Intelligent real-time decision support systems for tomato yield prediction management. PhD thesis, University of Warwick.

Hart, James R. (2013) Longitudinal dispersion in steady and unsteady pipe flow. PhD thesis, University of Warwick.

Pearce, Nicholas F. (2013) An investigation of turbulent boundary layers with streamwise and spanwise pressure gradients. PhD thesis, University of Warwick.

Liu, Huaiju (2013) Lubricated contact analysis of a spur gear pair with dynamic loads. PhD thesis, University of Warwick.

Zhou, Dan, (Researcher in engineering) (2013) Phase change materials in wallboards for heat management in building applications. PhD thesis, University of Warwick.

Abdul Kadir, Muhd K. (2013) Food security modelling using two stage hybrid model and fuzzy logic risk assessment. PhD thesis, University of Warwick.

Yang, Jia (Researcher in engineering) (2013) Melting and solidification models and thermal characteristics of microencapsulated phase change materials. PhD thesis, University of Warwick.

Hurst, Edward (Researcher in engineering) (2013) A numerical study of turbulent drag reduction using streamwise travelling waves of spanwise wall velocity. PhD thesis, University of Warwick.

Donnellan, Benedict T. (2013) Introducing the hybrid unipolar bipolar field effect transistor : the HUBFET. PhD thesis, University of Warwick.

Morshidi, Malik A. (2013) Continuous 3D hand tracking as planar target. PhD thesis, University of Warwick.

Wong, Hin Kwan Roland (2013) Study of the best linear approximation of nonlinear systems with arbitrary inputs. PhD thesis, University of Warwick.

Sheehan, T. (Therese) (2013) Cyclic behaviour of hollow and concrete-filled circular hollow section braces. PhD thesis, University of Warwick.

Selmanovic, Elmedin (2013) Stereoscopic high dynamic range imaging. PhD thesis, University of Warwick.

Ramić-Brkić, Belma (2012) The influence of olfaction on the perception of high-fidelity computer graphics. PhD thesis, University of Warwick.

Lin, Tzu-Yung (2012) Advanced electronics for fourier-transform ion cyclotron resonance mass spectrometry. PhD thesis, University of Warwick.

Zhang, Yuning (Researcher in engineering) (2012) Analysis of radial oscillations of gas bubbles in Newtonian or viscoelastic mediums under acoustic excitation. PhD thesis, University of Warwick.

Parfitt, Claire E. (2012) Characterisation, modelling and management of lithium-sulphur batteries for spacecraft applications. PhD thesis, University of Warwick.

Tian, Y. (Yuan) (2012) Heat transfer enhancement in phase change materials (PCMs) by metal foams and cascaded thermal energy storage. PhD thesis, University of Warwick.

Pitié, Frédéric (2012) High temperature thermal energy storage : encapsulated phase change material particles : determination of thermal and mechanical properties. PhD thesis, University of Warwick.

Dubla, Piotr (2012) Interactive global illumination on the CPU. PhD thesis, University of Warwick.

Karunarathne, Lalith (2012) Network coding via evolutionary algorithms. PhD thesis, University of Warwick.

Zafari, Behrouz (2012) Startlink building system and connections for fibre reinforced polymer structures. PhD thesis, University of Warwick.

Duque Daza, Carlos Alberto (2012) Low order modelling of flow-control techniques for turbulent skin-friction reduction. PhD thesis, University of Warwick.

Chacko, Salvio (2012) Numerical analysis of unsteady heat transfer for thermal management. PhD thesis, University of Warwick.

Tang, Liang (2012) Performance analyses and design for cognitive radios. PhD thesis, University of Warwick.

Ferguson, Andrew Neil (2012) Production mechanisms of intense events. PhD thesis, University of Warwick.

Sanderson, Ruth M. (2012) Quantitative studes in guided wave inspection of pipelines. PhD thesis, University of Warwick.

Misson, Gary P. (2012) Birefringent properties of the human cornea in vivo : towards a new model of corneal structure. PhD thesis, University of Warwick.

Awoye, Adeyinka A. (2012) Predistortion as a cost-effective means to tackling nonlinearity in radio over fibre links. PhD thesis, University of Warwick.

Griffin, Amanda C. (2012) Shared residential outdoor space : what residents do there and the features that support high levels of usage. PhD thesis, University of Warwick.

Jones, Christopher W. (2012) Development and characterisation of traceable force measurement for nanotechnology. PhD thesis, University of Warwick.

Huang, Hui, (Researcher in engineering) (2012) Lifetime prediction for power converters. PhD thesis, University of Warwick.

Asante, Michael (2012) Numerical modeling of nosocomial infection in a multi-bed ward environment. PhD thesis, University of Warwick.

Phoomboplab, Tirawat (2012) Self-resilient production systems : framework for design synthesis of multi-station assembly systems. PhD thesis, University of Warwick.

Jones, Rhys Gareth (2012) The mathematical modelling of gearbox vibration under applied lateral misalignment. PhD thesis, University of Warwick.

Westmoreland, Martin (2012) Development of a fault tolerant MOS field effect power semiconductor switching transistor. PhD thesis, University of Warwick.

Purssell, C. P. (2012) Materials and methods for microstereolithography. PhD thesis, University of Warwick.

Carlo, Les and Roberts, Paul A. B. (2012) Problem-formulation in a South African organization. Executive summary. EngD thesis, University of Warwick.

Alhagagi, Hussam A. (2012) Theory and optimisation of double conversion heterodyne photoparametric amplifier. PhD thesis, University of Warwick.

Elam, Dana (2012) A direct numerical simulation of dielectric barrier discharge (DBD) plasma actuators for turbulent skin-friction control. PhD thesis, University of Warwick.

Hua, Cheng, (Researcher in engineering) (2012) Flame front propagation velocity measurement and in-cylinder combustion reconstruction using POET. PhD thesis, University of Warwick.

Zhang, Fu (2012) Intelligent feature selection for neural regression : techniques and applications. PhD thesis, University of Warwick.

Huang, Peng, Ph.D. (2012) Optical wireless data transfer for rotor detection and diagnostics. PhD thesis, University of Warwick.

Chandler, I. D. (2012) Vertical variation in diffusion coefficient within sediments. PhD thesis, University of Warwick.

Chen, Xisha (2012) Pulsatile electrical stimulation of auditory nerve fibres : a modelling approach. PhD thesis, University of Warwick.

Butcher, Kent (2012) Concurrent engineering approach to complete non-linear FEA of an aircraft wheel's lock-ring. PhD thesis, University of Warwick.

Xiao, Pan (2012) Development and implementation of optical diagnostics for spray characterizations. PhD thesis, University of Warwick.

Chan, Wai Man Ivan (2012) Intelligent conceptual mould layout design system (ICMLDS) : innovation report. EngD thesis, University of Warwick.

Joshi, Harita (2012) Modulation for optical wireless communications. PhD thesis, University of Warwick.

Kusetoğulları, Hüseyin (2012) Network routing optimisation and effective multimedia transmission to enhance QoS in communication networks. PhD thesis, University of Warwick.

Talha, Tariq (2012) A numerical investigation of three-dimensional unsteady turbulent channel flow subjected to temporal acceleration. PhD thesis, University of Warwick.

Pathak, Shrey (2012) Piezoelectric microsensors for semiochemical communication. PhD thesis, University of Warwick.

Agrafiotis, Ioannis (2012) Enhancing user's privacy : developing a model for managing and testing the lifecycle of consent and revocation. PhD thesis, University of Warwick.

Talib, Marina (2012) Fabrication and characterisation of 3 dimensional scaffold for tissue engineering application via microstereolithography technique. PhD thesis, University of Warwick.

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.

Xu, Dun (2011) Mechanical characterisation of micro-stereolithographic materials. PhD thesis, University of Warwick.

Harvey, Carlo (2011) Modality based perception for selective rendering. PhD thesis, University of Warwick.

Wang, Shuyi (2011) Optimization of transmitted-reference receivers in the ultra-wide bandwidth system. PhD thesis, University of Warwick.

Charlesworth, Chris, Eng.D. (2011) Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots. EngD thesis, University of Warwick.

Mahmoudi, Shiva (2011) The circulating fluidized bed (CFB) combustion of biomass and the control of gaseous emissions. PhD thesis, University of Warwick.

Shipley, A. (Adrian) (2011) Theory of partial discharge and arc formation. PhD thesis, University of Warwick.

Gregorio, S. O. (Sandy O.) (2011) Investigation on the dynamics of gravity-driven coastal currents. PhD thesis, University of Warwick.

Saleem, Aamer (2011) NIR spectroscopy for personal screening. PhD thesis, University of Warwick.

Leong, Kennith Kin (2011) Utilising power devices below 100 K to achieve ultra-low power losses. PhD thesis, University of Warwick.

Hulusić, Vedad (2011) Auditory-visual interaction in computer graphics. PhD thesis, University of Warwick.

Gammon, P. M. (2011) Development of SiC heterojunction power devices. PhD thesis, University of Warwick.

Chin, Sze Vone (2011) Structural identifiability and indistinguishability analyses of glucose-insulin models. PhD thesis, University of Warwick.

Vlaskamp, Jozef H. A. (2011) An experimental and numerical investigation into the vertical dependence of Taylor-columns generated by a rotating disc. PhD thesis, University of Warwick.

Alsoufi, Mohammad S. (2011) A high dynamic response micro-tribometer measuring-head. PhD thesis, University of Warwick.

Kopera, Michal Andrzej (2011) Direct numerical simulation of turbulent flow over a backward-facing step. PhD thesis, University of Warwick.

Zhao, Bo (2011) Spectrum efficiency improvement techniques for wireless communications. PhD thesis, University of Warwick.

He, Peinan (2011) A new design of devices and links configuration for indoor optical wireless communications. PhD thesis, University of Warwick.

Yin, Xiaokang (2011) Capacitive imaging technique for non-destructive evaluation (NDE). PhD thesis, University of Warwick.

Loponov, Konstantin Nikolayevich (2011) Development of a scalable photochemical reactor for syntheses of fine chemicals. PhD thesis, University of Warwick.

Tiev, Visoth (2011) Vegetation and discharge effects on the hydraulic residence time distribution within a natural pond. PhD thesis, University of Warwick.

Si, Chen (2011) The quantitative analysis of optical phase measurement and its application to the determination of corneal birefringence. PhD thesis, University of Warwick.

Atari, M. I. (Mohammed Isam) (2011) Mathematical models characterising the kinetics and dynamics of topotecan to account for drug resistance mechanisms. PhD thesis, University of Warwick.

Çelik, Turgay (2011) A multiresolution framework for computer vision-based autonomous navigation. PhD thesis, University of Warwick.

Bashford-Rogers, Thomas (2011) Accelerating global illumination for physically-based rendering. PhD thesis, University of Warwick.

Happa, Jassim (2011) High-fidelity rendering and display of cultural heritage. PhD thesis, University of Warwick.

Sun, Shaobo (2010) Applications of spectrum slicing in optical access networks. PhD thesis, University of Warwick.

Li, XuQin (2010) Data mining using intelligent systems : an optimized weighted fuzzy decision tree approach. PhD thesis, University of Warwick.

Bavelis, Konstantinos (2010) Finite-element time-domain modelling of cylindrical structures with a modal non-reflecting boundary condition. PhD thesis, University of Warwick.

Sloper, John Erik (2010) Error management in ATLAS TDAQ : an intelligent systems approach. PhD thesis, University of Warwick.

Petrášová, Alena (2010) Virtual reality for the efficient treatment of infants with feeding difficulties. PhD thesis, University of Warwick.

Sotenko, Maria V. (2010) Bicatalytic conversion of glycerol to value-added products. PhD thesis, University of Warwick.

Aggarwal, Vibhor (2010) High-fidelity rendering on shared computational resources. PhD thesis, University of Warwick.

Swan, I. R. (Ian R.) (2010) 3-D thermal modelling of power device packaging. PhD thesis, University of Warwick.

Palma-Mendoza, Jaime Alberto (2010) Business process redesign to support the adoption of e-business for the improvement of supply chain management : innovation report. EngD thesis, University of Warwick.

Roberts, Graham John (2010) Evaluation of emerging unipolar devices in the motor drive of a hybrid electric vehicle. PhD thesis, University of Warwick.

Chapman, James D. (2010) Mathematical modelling of epidemic systems influenced by maternal antibodies and public health intervention. PhD thesis, University of Warwick.

Jaffer, Sadiq (2010) Noise adaptive particle filtering for mobile robot applications. PhD thesis, University of Warwick.

Taylor, J. E. (James E.) (2010) Novel convolution-based processing techniques for application in chemical sensing. PhD thesis, University of Warwick.

Hunter, David J. (2010) Volumetric flow prediction using multiple plane particle image velocimetry. PhD thesis, University of Warwick.

Cheng, Sheng (2010) Novel implementation technique for a wavelet-based broadband signal detection system. PhD thesis, University of Warwick.

Yue, Zhaoyang (2010) Systematic study of touch-feel perception : surface affective engineering aspects. PhD thesis, University of Warwick.

Kwon, Remi Jounghuem (2010) Anxiety activating virtual environments for investigating social phobias. PhD thesis, University of Warwick.

Yang, Jianhua (2010) Intelligent data mining using artificial neural networks and genetic algorithms : techniques and applications. PhD thesis, University of Warwick.

Zeng, Yu (2010) Adaptive modulation schemes for optical wireless communication systems. PhD thesis, University of Warwick.

Brend, Mark (2010) Traversing SPIV for the measurement of vortex rings under background rotation. PhD thesis, University of Warwick.

Claus, Daniel (2010) Resolution improvement methods applied to digital holography. PhD thesis, University of Warwick.

Yaakub, Sabariah (2009) E-commerce developments and impacts : a case of Malaysian maritime third party logistics service provider companies. PhD thesis, University of Warwick.

King, Philip Huw (2009) Towards rapid 3D direct manufacture of biomechanical microstructures. PhD thesis, University of Warwick.

Finney, James (2009) Autocoding methods for networked embedded systems. EngD thesis, University of Warwick.

Hattersley, John G. (2009) Mathematical modelling of immune condition dynamics : a clinical perspective. PhD thesis, University of Warwick.

Li, C. (Chuan) (2009) Short-range ultrasonic communications in air using capacitive transducers. PhD thesis, University of Warwick.

Raj, Alex Noel Joseph (2009) Accurate depth from defocus estimation with video-rate implementation. PhD thesis, University of Warwick.

Waters, Matthew (2009) Application of software engineering tools and techniques to PLC programming : innovation report. EngD thesis, University of Warwick.

Poxon, John E. W. (2009) Development and use of a hybrid electric vehicle (HEV) model for interactive customer assessment of sound quality : innovation report. EngD thesis, University of Warwick.

Singh, Harsimrat (2009) Development of EEG based BCI approaches for detection of awareness in human disorders of consciousness. PhD thesis, University of Warwick.

Hickman, Richard James (2009) Generic integrated framework for improving inter-firm relationships : executive summary. EngD thesis, University of Warwick.

Che Harun, Fauzan Khairi (2009) Mimicking the human olfactory system: a portable e-­mucosa. PhD thesis, University of Warwick.

Li, Zheng (2009) Spur gear teeth contact analysis on power-train transmission noise, vibration and harshness. PhD thesis, University of Warwick.

Wu, Yupeng (2009) Thermal management of concentrator photovoltaics. PhD thesis, University of Warwick.

Guo, Yue (2009) An investigation of model-based techniques for automotive electronic system development. PhD thesis, University of Warwick.

Elliott, Novak Samuel Jon (2009) Mathematical modelling and analysis of cerebrospinal mechanics: an investigation into the parthogenesis of syringomyelia. PhD thesis, University of Warwick.

Brzeski, Ian (2009) Gas-assisted compression moulding of glass reinforced polypropylene. PhD thesis, University of Warwick.

Rowley, James Henry (2009) Developing flexible automation for mushroom harvesting (Agaricus bisporus) : innovation report. EngD thesis, University of Warwick.

Higgins, Matthew D. (2009) Genetic algorithm optimisation methods applied to the indoor optical wireless communications channel. PhD thesis, University of Warwick.

Li, Na, Ph.D. (2009) Intelligent transmitter/receiver to locate infrared user in environment. PhD thesis, University of Warwick.

Banterle, Francesco (2009) Inverse tone mapping. PhD thesis, University of Warwick.

Oliver, John Douglas (2009) Autonomous surveillance in an urban environment. PhD thesis, University of Warwick.

Kintingu, Simion Hosea (2009) Design of interlocking bricks for enhanced wall construction, flexibility, alignment accuracy and load bearing. PhD thesis, University of Warwick.

Chung, Roy Chi Ping (2009) An econometric model for manufacturing strategy formulation and competitiveness in China : innovation report. EngD thesis, University of Warwick.

Khawaja, Jaleed Ejaz (2009) Asic gas sensors based on ratiometric principles. PhD thesis, University of Warwick.

Metcalf, Steven J. (2009) Compact, efficient carbon-ammonia adsorption heat pump. PhD thesis, University of Warwick.

Nawasra, Jawad (2009) Novel techniques for high-speed time-resolved photoelestic stress analysis and its application to compressor blade design. PhD thesis, University of Warwick.

Arnab, Sylvester (2009) Soft volume simulation using a deformable surface model. PhD thesis, University of Warwick.

Petoussis, Andreas G. (2009) Supply function equilibrium analysis for electricity markets. PhD thesis, University of Warwick.

Meredith, James O. (2009) Biocomposites for bone tissue engineering : innovation report. EngD thesis, University of Warwick.

Martin, David G. (2009) High precision angle calibration for spherical measurement systems. PhD thesis, University of Warwick.

Giudice, Sebastiano D. (2009) Sound quality evaluations using interactive simulation : innovation report. EngD thesis, University of Warwick.

Farahi, Elham (2008) Advanced calcareous ceramics via novel green processing and super-critical carbonation. PhD thesis, University of Warwick.

Jones, Jeffrey Alun (2008) Electronic reliability prediction: a study over 25 years. PhD thesis, University of Warwick.

Chong, Beatrice (2008) Congestion management using FACTS controllers. PhD thesis, University of Warwick.

Shin, Dongjoe (2008) Robust surface modelling of visual hull from multiple silhouettes. PhD thesis, University of Warwick.

Verhaeghe, Ing G. (2008) Achieving aerospace standard porosity levels when welding thin and thick-section aluminium using fibre-delivered lasers : executive summary. EngD thesis, University of Warwick.

Vadivelu, Ramanan (2008) 'Fixclips': internal fixation system in paediatric orthopaedics. MD thesis, University of Warwick.

Suwatthikul, Jittiwut (2008) A framework and methods for on-board network level fault diagnostics in automobiles. PhD thesis, University of Warwick.

Preece, Adam (2008) An investigation into methods to aim the simulation of turbulent separation control. PhD thesis, University of Warwick.

Leonte, Irina Ionela (2008) High frequency acousto-electric microsensors for liquid analysis. PhD thesis, University of Warwick.

Baillie, Iain (2008) The development of a laser-EMAT system suitable for on-line inspection in the continuous casting plant : innovation report. PhD thesis, University of Warwick.

Jewkes, James (2008) An improved turbulent boundary layer inflow condition, applied to the simulation of jets in cross-flow. PhD thesis, University of Warwick.

McArdle, Elizabeth (2008) Online communities and their evaluation: creation of a method to assist Online Community Managers to evaluate the performance of their own communities: executive summary. EngD thesis, University of Warwick.

Kiran, Amit (2008) Jet noise : aeroacoustic distribution of a subsonic co-axial jet. PhD thesis, University of Warwick.

Al-Khouri, Ali Mohammed S. M. (2007) Strategic and large scale government IT projects management: innovation report. EngD thesis, University of Warwick.

Iwaki, Takao (2007) Utra-low power single crystal silicon SOI-CMOS micro-hotplate with novel temperature-modulation principle for chemical sensing. PhD thesis, University of Warwick.

Crofts, William Edward (2007) The generation of depth maps via depth-from-defocus. PhD thesis, University of Warwick.

Bradley, Robert John (2007) Capacitive ultrasonic transducers fabricated using microstereolithography. PhD thesis, University of Warwick.

Ho, K. S. (2007) Advances in EMAT measurements for NDE. PhD thesis, University of Warwick.

James-Gordon, Yvette (2007) A framework to facilitate effective e-learning in engineering development environments: executive summary. EngD thesis, University of Warwick.

Claxton, Christopher David (2007) Colour depth-from-defocus incorporating experimental point spread function measurements. PhD thesis, University of Warwick.

Hamilton, Dean P. (2007) Novel dispersion representation of rectangular dielectric guides with application to leaky-wave antennas. PhD thesis, University of Warwick.

Still, Gwilym T. (2007) Methods for reducing the cost of cementitious building components in developing countries, with particular reference to rainwater harvesting. PhD thesis, University of Warwick.

Abdullah, Mohammad Faiz Liew (2006) Techniques for signal to noise ratio adaptation in infared optical wireless for optimisation of receiver performance. PhD thesis, University of Warwick.

Skeen, Andrew (2006) The development of high-speed PIV techniques and their application to jet noise measurement. PhD thesis, University of Warwick.

Hajarnavis, Vivek (2006) An evaluation and comparison of PLC programming techniques : innovation report. EngD thesis, University of Warwick.

Zhong, Y. (2006) Studies on equilibrium and dynamic characteristics of new adsorption pairs. PhD thesis, University of Warwick.

Howell, Richard M. (2006) Snoring : a flow-structure interaction. PhD thesis, University of Warwick.

Gerbig, Yvonne B. (2006) Control of the nanostructure and microtribology of magnetron sputtered surfaces. PhD thesis, University of Warwick.

Armoutis, Nikolaos (2006) Small-medium engineering enterprises and e-business: executive summary. EngD thesis, University of Warwick.

Evernden, Mark (2006) Structural evaluation of a novel box beam system of Pultruded Fibre Reinforced Polymer shapes. PhD thesis, University of Warwick.

Tan, Su-Lim (2005) Smart chemical sensing microsystem : towards a nose-on-a-chip. PhD thesis, University of Warwick.

Swift, Mark P. (2005) The development and implementation of a collaborative architecture for SMEs : executive summary. PhD thesis, University of Warwick.

Pavlosoglou, Ioannis (2005) Emergence in the security of protocols for mobile ad-hoc networks. PhD thesis, University of Warwick.

Bañuelas, Ricardo (2005) Six Sigma vs. Design for Six Sigma: selection of the requisite Six Sigma approach using multi-criteria decision analysis: innovation report. EngD thesis, University of Warwick.

Xue, Lei (2005) Internet connection method for mobile ad hoc wireless networks. PhD thesis, University of Warwick.

Folland, Ross Simon (2005) On the development of intelligent medical systems for pre-operative anaesthesia assessment. PhD thesis, University of Warwick.

Riggs, Ian (2004) Supplier selection using performance self assessment reporting in the automotive industry : executive summary. EngD thesis, University of Warwick.

Faulkner, Alastair (2004) Data integrity: an often-ignored aspect of safety systems: executive summary. EngD thesis, University of Warwick.

Van den Bergh, Dena (2004) The development of an integrated system for the management of pharmaceutical and surgical consumable products across a group of private hospitals : innovation report. EngD thesis, University of Warwick.

Berriman, James Robert Stockwell (2004) The application of air-coupled ultrasonic systems and signal processing to the interrogation of concrete. PhD thesis, University of Warwick.

Alsemgeest, Raimond W. (2004) The time-dependent flow through throttle valves: a computational and experimental investigation. PhD thesis, University of Warwick.

Kiatmanaroj, Subongkoj (2004) Sandwich injection moulding with thermoset materials. PhD thesis, University of Warwick.

Liu, Yan, Ph.D. (2004) Numerical simulations of unsteady complex geometry flows. PhD thesis, University of Warwick.

Lutz, Cyprien (2004) Structural integrity of bolted joints for pultruded GRP profiles. PhD thesis, University of Warwick.

Dowidar, Helmy A. M. (2003) The geometrical interaction of the stylus and the measured surface in 3D roughness measurements. PhD thesis, University of Warwick.

Li, Gregg G. K. L. (2003) Governance systems for organisations: governance information control system design and development methodology for NGO boards: executive summary. PhD thesis, University of Warwick.

Dessens, Luis Felipe Romero (2003) Strong component-based methodology for facility layout design. PhD thesis, University of Warwick.

Sweet, Cameron (2003) Optical free space feedforward non-linearity correction system. PhD thesis, University of Warwick.

Mena, Carlos H. (2003) Complexity in organisations: a conceptual model: executive summary. PhD thesis, University of Warwick.

Stergiou, Theodore (2003) Protocol security for third generation telecommunication systems. PhD thesis, University of Warwick.

Jouvray, Alexandre (2003) Computation and measurements of flows in rooms. PhD thesis, University of Warwick.

Davies, Robin John (2003) Formulating competitive strategy in the UK housebuilding industry : executive summary. PhD thesis, University of Warwick.

Dunne, Gerard T. (2003) The introduction of a Sound Quality Engineering Process to Jaguar Cars : executive summary. PhD thesis, University of Warwick.

Hall, Wayne (2003) Finite element modelling and simulation for a 'smart' tyre. PhD thesis, University of Warwick.

Neild, Adrian (2003) Ultrasonic air-coupled capacitive arrays. PhD thesis, University of Warwick.

Thomson, Fiona Mhairi (2002) Freeze-thaw experiments on some British soils. PhD thesis, University of Warwick.

Lee, Siu Man (2002) Low-power silicon planar micro-calorimeter employing nanostructured catalyst. PhD thesis, University of Warwick.

Howse, D. S. (2002) Improved productivity in fusion welding : executive summary. EngD thesis, University of Warwick.

Najjar, Ismail M. R. I. (2002) Investigation of contact of metrological probe tips with rough engineering surfaces. PhD thesis, University of Warwick.

Craig, David (2002) A model for customer-focused culture change in the speculative house-building industry : executive summary. PhD thesis, University of Warwick.

Kirwan, Kerry (2002) Alternative glazing for automotive vehicles: executive summary. EngD thesis, University of Warwick.

Hayes, Jonathan (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.

Wilson, Trevor Stewart (2002) The research and development of in situ non-intrusive optical and temperature diagnostics in an internal combustion engine. PhD thesis, University of Warwick.

Montgomery, David Edward (2002) Dynamically-compacted cement stabilised soil blocks for low-cost walling. PhD thesis, University of Warwick.

King, Graham, Eng.D. (2002) Systems modelling and simulation in the product development process for automotive powertrains : executive summary. EngD thesis, University of Warwick.

Patterson, Fiona D. (2002) Project risk management and its application into the automotive manufacturing industry: executive summary. EngD thesis, University of Warwick.

Tan, Ai Hui (2002) System identification and its applications, with emphasis on direction-dependent processes. PhD thesis, University of Warwick.

Galanakis, Kostas (2002) The 'creative factory': an innovation systems model using a systems thinking approach. PhD thesis, University of Warwick.

Karim, Javid (2002) Development of a process driven approach to improving supply chain performance within the airline service industry: executive summary. PhD thesis, University of Warwick.

Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.

Ainscough, Matthew (2001) Integration of self assessment with a change management process for deploying concurrent engineering : executive summary. EngD thesis, University of Warwick.

Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.

Jones, Simon Benedict (2001) The development of innovative products and manufacturing processes utilising fire resistant materials : executive summary. EngD thesis, University of Warwick.

Covington, James A. (2001) CMOS and SOI CMOS FET-based gas sensors. PhD thesis, University of Warwick.

Robertson, Toby James Gray (2001) Advances in ultrasonic capacitive transducer technology. PhD thesis, University of Warwick.

Pan-Ngum, Setha (2001) Alternative vehicle electronic architecture for individual wheel control. PhD thesis, University of Warwick.

Kirtay, Selçuk (2001) Interference analysis of broadband space and terrestrial fixed radio communications systems in the frequency range 12 to 30 GHz. PhD thesis, University of Warwick.

Whittaker, Lucy M. T. (2001) Modelling and analysis of current and concept vehicles for the purpose of enhancing vehicle handling: executive summary. EngD thesis, University of Warwick.

Brackley, Mark (2001) Acoustic noise from small electronically commutated motors. PhD thesis, University of Warwick.

Coleman, Julian Laurence (2001) Determinants of supply chain structure. PhD thesis, University of Warwick.

Bálint, Tibor Sándor (2001) Dynamics of the upper airway. PhD thesis, University of Warwick.

Lockerby, Duncan A. (2001) Numerical simulation of boundary-layer control using MEMS actuation. PhD thesis, University of Warwick.

Saje, A. (2001) The design of organisations, products and processes for strategic flexibility : executive summary. EngD thesis, University of Warwick.

Kerali, A. G. (Anthony Geoffrey) (2001) Durability of compressed and cement-stabilised building blocks. PhD thesis, University of Warwick.

Rungseesantivanon, Wuttipong (2000) Factors affecting adhesion of polymers during coinjection. PhD thesis, University of Warwick.

Halliday, Ian (2000) The development and use of strategic business performance improvement frameworks for rapid prototyping and tooling : executive summary. EngD thesis, University of Warwick.

Balbontin-Posadas, Alejandro (2000) CETGI : an assessment tool for global concurrent engineering : executive summary. EngD thesis, University of Warwick.

Arunachalam, Raghu (2000) An agent based compositional framework for supply chain simulation. PhD thesis, University of Warwick.

McKenzie, Robin (2000) From lean supply and relationships to SME assessment : executive summary. EngD thesis, University of Warwick.

Al-Khalifa, Sherzad (2000) Identification of a binary gas mixture from a single resistive microsensor. PhD thesis, University of Warwick.

Burnett, Mark (2000) Optical instrumentation for fluid flow in gas turbines. PhD thesis, University of Warwick.

Chapman, Paul Anthony (2000) Time-based performance improvement: a methodology for the diagnosis of processes and design of performance improvement solutions: executive summary. EngD thesis, University of Warwick.

Wallace, Mark (2000) The new flux switching motor : a DC motor without brushes. PhD thesis, University of Warwick.

Thomas, Paul Robert (2000) A new multiple-access telecommunication system. PhD thesis, University of Warwick.

Chan, Wai Sang Samuel (2000) An energy efficient approach for radon management in a HVAC environment: executive summary. EngD thesis, University of Warwick.

Fisher, Martin (2000) An experimental and numerical investigation into compact heat exchangers. PhD thesis, University of Warwick.

Barnes, Tina Angela (2000) A framework for the effective management of collaborative R&D projects : executive summary. EngD thesis, University of Warwick.

Robinson, A. J. (2000) Petrol engine development strategy : executive summary. EngD thesis, University of Warwick.

Chen, Jay-San (2000) Standardisation of flexure testing of engineering ceramics. PhD thesis, University of Warwick.

Gasser, Russell (2000) Technology for humanitarian landmine clearance. PhD thesis, University of Warwick.

Fu, Colin Leong Chee (1999) Power-control design of resonant converters. PhD thesis, University of Warwick.

Piggin, Richard Stuart Hadley (1999) Application and development of fieldbus : executive summary. EngD thesis, University of Warwick.

Shin, Hyun Woo (1999) A hybrid electronic nose system for monitoring the quality of potable water. PhD thesis, University of Warwick.

Chang, An-Yuan (1999) An attribute approach to the measurement of manufacturing system flexibility. PhD thesis, University of Warwick.

Burgess, Rachel (1999) The business process engineering of an aerospace aftermarket supply chain : executive summary. EngD thesis, University of Warwick.

Wilkes, Mark Francis (1999) A catalytic and solid state study of lanthanum doped ceria. PhD thesis, University of Warwick.

Al-Meshaiei, Eisa Abdullah Eisa S. (1999) An expert system for material handling equipment selection. PhD thesis, University of Warwick.

Holmes, C. J. (1999) Re-engineering the new product introduction process : executive summary. EngD thesis, University of Warwick.

Jun, Yong-Tae (1999) A feature-based reverse engineering system using artificial neural networks. PhD thesis, University of Warwick.

Gretton, Jud Lorna (1999) Supporting sustainable change: executive summary. EngD thesis, University of Warwick.

Hill, Denys Alan (1999) A chaos related investigation into small manufacturing business financial decision-making dynamics. PhD thesis, University of Warwick.

Hoult, A. P. (1999) An experimental analysis of solid state pulsed laser melting of aluminium. PhD thesis, University of Warwick.

Jolliffe, Clifford Mark (1999) The design of hybrid stepping motors aided by three dimensional finite element analysis. PhD thesis, University of Warwick.

Tsuchiya, Kazuyoshi (1999) Fabrication of TiNi shape memory alloy microactuators by ion beam sputter deposition. PhD thesis, University of Warwick.

Kendall, Ian R. (1999) Key challenges in the development of automotive software-based electronic control systems : executive summary. PhD thesis, University of Warwick.

Dunlop, R. N. (1999) The development of thermal spray tooling : executive summary. PhD thesis, University of Warwick.

Faithfull, Paul (1999) A hardware-in-the-loop approach to independent wheel control development using a physical scale model as a low cost prototyping tool : executive summary. EngD thesis, University of Warwick.

Pullar, Robert Carlyle (1999) The synthesis and characterisation of hexagonal ferrite fibres. PhD thesis, University of Warwick.

Smith, C. L. R. (1998) Development and deployment of document management technology into Rover : executive summary. EngD thesis, University of Warwick.

Porter, Lee James (1998) The effects of passive wall porosity on the linear stability of boundary layers. PhD thesis, University of Warwick.

Allchurch, M. J. (1998) Development of a manufacturing engineering system for the motor industry : executive summary. EngD thesis, University of Warwick.

Bacci Da Silva, Marcio (1998) Lubrication in metal cutting under built-up edge conditions. PhD thesis, University of Warwick.

Gongora, Mario Augusto (1998) Artificial intelligence tools for path generation and optimisation for mobile robots. PhD thesis, University of Warwick.

Taylor, Paul (1998) Fast shearing of cohesive soils using ring shear apparatus. PhD thesis, University of Warwick.

Thirupathi, Devi (1998) Integrated information model for managing the product introduction process. PhD thesis, University of Warwick.

Clarke, Angela (1998) Improving the change management process : executive summary. EngD thesis, University of Warwick.

Zheng, Youxin (1998) Connection behaviour and frame analysis for structures of pultruded profile. PhD thesis, University of Warwick.

Ng Wai Kwan, Stephen (1998) Re-engineering the semiconductors business process to focus on Total Service Quality development through people in the Customer Responsiveness Center : executive summary. EngD thesis, University of Warwick.

Ferrie, John (1998) The development of process models : executive summary. PhD thesis, University of Warwick.

Humphries, Michael Ralph (1998) Management in engineering consultancies: with special reference to the Carl Bro Group and Peter Deer and Associates: executive summary. EngD thesis, University of Warwick.

Leverton, Timothy A. (1998) The use of concurrent engineering methodologies : achieving world class product development performance in the automobile industry : executive summary. EngD thesis, University of Warwick.

Porter, Nicholas David (1998) Facial feature processing using artificial neural networks. PhD thesis, University of Warwick.

Lee, Sik-Fun (1998) The use of Chinese philosophies to assist achievement of world-class business excellence. PhD thesis, University of Warwick.

Tennant, Charles (1998) Deployment of a company wide quality strategy in the automotive business : executive summary. EngD thesis, University of Warwick.

Petrovic, Dobrila (1997) Modelling and analysis of serial supply chains in uncertain environments. PhD thesis, University of Warwick.

Tseng, Henry (1997) The design and implementation of integrated manufacturing strategy in China : executive summary. PhD thesis, University of Warwick.

Wilding, Richard David (1997) An investigation into sources of uncertainity within industrial supply chains : amplification, deterministic chaos & parallel interactions. PhD thesis, University of Warwick.

Lo, Wai-Kwok (1997) Strategic change management toward agile manufacturing : a Hong Kong experience : executive summary. EngD thesis, University of Warwick.

Gregory, Ian C. (1997) The transfer of 'best practice' knowledge into manufacturing companies : executive summary. EngD thesis, University of Warwick.

Liang, Kung-Hao (1997) From uncertainty to adaptivity : multiscale edge detection and image segmentation. PhD thesis, University of Warwick.

Barbosa, Manuel Romano dos Santos Pinto (1997) Traffic management and control of automated guided vehicles using artificial neural networks. PhD thesis, University of Warwick.

Sandhu, Sukhbinder Singh (1997) Development of a standard framework for manufacturing simulators. PhD thesis, University of Warwick.

Huang, Kuo-En (1997) Fuzzy control and its application to a pH process. PhD thesis, University of Warwick.

Craven, Mark Antony (1997) Bacteria classification with an electronic nose employing artificial neural networks. PhD thesis, University of Warwick.

Tahir, Mahmood Md. (1997) Structural and economic aspects of the use of semi-rigid joints in steel frames. PhD thesis, University of Warwick.

Lewis, Trevor Stephen (1997) The form-finding of structures possessing a constant surface stress. PhD thesis, University of Warwick.

Lo, Victor H. Y. (1997) Implementing quality management in a Chinese based society : Hong Kong : executive summary. EngD thesis, University of Warwick.

Wang, Zuobin (1997) New approaches in optical interferometry. PhD thesis, University of Warwick.

Boateng, Douglas (1997) Re-configuring an international pharma-chemical customer services policy through the Delphi technique and process mapping : executive summary. EngD thesis, University of Warwick.

Yuan, Hui (1996) The resistances of stud shear connectors with profiled sheeting. PhD thesis, University of Warwick.

Pardoe, Andrew Charles (1996) Neural network image reconstruction for nondestructive testing. PhD thesis, University of Warwick.

Huang, You Sen (1996) A control strategy for promoting shop-floor stability. PhD thesis, University of Warwick.

Pimentel, Ernani Falcao (1996) A two-pass scheduling method using discrete event simulation. PhD thesis, University of Warwick.

Thorpe, Roger (1996) Heat transfer by forced convection in beds of granular adsorbent material for solid sorption heat pumps. PhD thesis, University of Warwick.

Khan, Altaf Hamid (1996) Feedforward neural networks with constrained weights. PhD thesis, University of Warwick.

Pike, Andrew Charles (1996) Design of chemoresistive silicon sensors for application in gas monitoring. PhD thesis, University of Warwick.

Abdullah, Abu (1996) Machining of aluminium based Metal Matrix Composite (MMC). PhD thesis, University of Warwick.

Mallick, Swapan (1996) Strategies for producing fast finite element solutions of the incompressible Navier-Stokes equations on massively parallel architectures. PhD thesis, University of Warwick.

Coulton, Jerome Philip Jack (1996) Effect of elevated strain rates on the mechanical performance of polyethylene structures. PhD thesis, University of Warwick.

Zhang, Zhige (1996) Accuracy studies on non-destructive metrology of small hole. PhD thesis, University of Warwick.

Gunn, Roger (1996) Mathematical modelling and identifiability applied to positron emission tomography data. PhD thesis, University of Warwick.

Cheung, Siu-Wing (1996) On the design and integration of education simulation games in engineering business management. PhD thesis, University of Warwick.

Britnell, David John (1996) Pressure assisted segregation in squeeze cast aluminium alloys. PhD thesis, University of Warwick.

Pollock, Helen Geraldine Phyllis (1996) A series-parallel load-resonant converter for a controlled-current arc-welding power supply. PhD thesis, University of Warwick.

Yam, Richard Ching Man (1996) Strategic development of HK/China manufacturing industries. PhD thesis, University of Warwick.

Ng, Tat Lun (1996) Improvement of product development cycle time and cost by applying concurrent integrated design and assembly planning : executive summary. EngD thesis, University of Warwick.

Malburg, Mark C. (1996) A unified methodology for the application of surface metrology. PhD thesis, University of Warwick.

Brown, Nigel David (1995) Aspects of sway frame design and ductility of composite end plate connections. PhD thesis, University of Warwick.

Cafolla, Janka (1995) Corrugated webs and lateral restraints in plate girders for bridges. PhD thesis, University of Warwick.

Dyer, David Charles (1995) Super-precision programmable current source for coil/magnet actuators. PhD thesis, University of Warwick.

Pinfold, Martyn Keith (1995) Composite mechanical properties for use in structural analysis. PhD thesis, University of Warwick.

Graysmith, J. L. (1995) Using CFD in engine design. PhD thesis, University of Warwick.

McCormack, Anthony Sean (1995) The design of periodic excitations for dynamic system identification. PhD thesis, University of Warwick.

Larkin, Andrew B. (1995) The development of artificial neural networks for the analysis of market research and electronic nose data. PhD thesis, University of Warwick.

Shirvani, Ayoub (1995) An investigation into the design for vibration damping of extended length tool holders. PhD thesis, University of Warwick.

Bal, Darbara Jay (1995) Materials selection using knowledge-based techniques. PhD thesis, University of Warwick.

Xu, Ying (1995) A metrological scanning force microscope. PhD thesis, University of Warwick.

Liu, Xianping (1994) Fidelity study in surface measurements in nanometre metrology. PhD thesis, University of Warwick.

Gooding, Dominic Edward Maxwell (1994) Improved processes for the production of soil-cement building blocks. PhD thesis, University of Warwick.

Kabecha, Wanjau Wa (1994) The quality of informal sector production : poor quality or quality for the poor. PhD thesis, University of Warwick.

Michaelides, Alexandros M. (1994) The design of switched reluctance motors for efficient energy conversion. PhD thesis, University of Warwick.

Baharin, Shamsuddin (1994) Knowledge-based automatic tolerance analysis system. PhD thesis, University of Warwick.

Fenton, Marcus Brian Mayhall (1994) Flow and heat transfer modelling of an automotive engine lubrication system. PhD thesis, University of Warwick.

Gavigan, Kevin (1994) The design, development and application of a combined connectionist expert system and 'Pocket' Boltzmann machine approach to the Dynamic Customer Assignment and Vehicle Routing Problem. PhD thesis, University of Warwick.

Alatorre-Frenk, Claudio (1994) Cost minimisation in micro-hydro systems using pumps-as-turbines. PhD thesis, University of Warwick.

Huang, Dong-jie (1994) Composite beams : reliability and longitudinal shear resistance with profiled sheeting. PhD thesis, University of Warwick.

Glover, Peter Benedict Myers (1994) Computer simulation and analysis methods in the development of the hydraulic ram pump. PhD thesis, University of Warwick.

Cartwright, Alan John (1994) Application of definitive scripts to computer aided conceptual design. PhD thesis, University of Warwick.

Miller, Jimmie Andrew (1994) From STM to nanomemory: a transfer of technology feasibility study. PhD thesis, University of Warwick.

Goodall, William Richard (1993) Scheduling and control in the batch process industry using hybrid knowledge based simulation. PhD thesis, University of Warwick.

Cherry, Ann Susan (1992) An investigation of multibody system modelling and control analysis techniques for the development of advanced suspension systems in passenger cars. PhD thesis, University of Warwick.

Gosling, Peter David (1992) Numerical modelling of stable minimal surfaces. PhD thesis, University of Warwick.

Turner, Lynne Helen (1992) Improvement of activated charcoal-ammonia adsorption heat pumping/refrigeration cycles : investigation of porosity and heat/mass transfer chacteristics. PhD thesis, University of Warwick.

Chen, Shiming (1992) Instability of composite beams in hogging bending. PhD thesis, University of Warwick.

Zheng, Kougen (1992) Application of the Wigner distribution to monitoring cutting tool condition. PhD thesis, University of Warwick.

Najafi, Ali A. (1992) End plate connections and their influence on steel and composite structures. PhD thesis, University of Warwick.

Tran, Sang Cong (1991) Applications of formal methods in engineering. PhD thesis, University of Warwick.

Miller, Justin Dinsdale (1991) Coupled microstrip and its application to broadband microwave structures. PhD thesis, University of Warwick.

Benterkia, Zoubir (1991) End-plate connections and analysis of semi-rigid steel frames. PhD thesis, University of Warwick.

Khamsehzadeh, Houshang (1991) Behaviour of ceramic cutting tools when machining superalloys. PhD thesis, University of Warwick.

Coy, Joanne (1991) The quantification of sampling error in coordinate measurement. PhD thesis, University of Warwick.

Cheung, Yen Ping (1991) Artificial intelligence techniques for assembly process planning. PhD thesis, University of Warwick.

Hatami Khosrowshahi, S. R. (1991) A non-deterministic approach to dynamic layout planning of flexible manufacturing systems. PhD thesis, University of Warwick.

Poston, David (1990) The development of rural manufacturing industry in Central Africa: with special reference to metalworking. PhD thesis, University of Warwick.

Molenstra, Nadia Julia (1990) Ultimate strength of composite beams. PhD thesis, University of Warwick.

Fan, Chun Keung Roger (1990) Buckling in continuous composite beams. PhD thesis, University of Warwick.

Kavianpour, Kaivan (1990) Design and analysis of unbraced steel frames. PhD thesis, University of Warwick.

Harvey, Adam Benedict (1990) Study of an intermittent regenerative cycle for solar cooling. PhD thesis, University of Warwick.

Burrows, Bryan Godfrey (1989) Organisation and quality of falsework construction : a socio-economic study of the organisational structure of the construction industry with respect to the falsework production process and the quality of workmanship attained. PhD thesis, University of Warwick.

Zhu, Quan Min (1989) Identification & control of nonlinear systems. PhD thesis, University of Warwick.

Kim, Yong-hwan, Ph.D. (1989) Behaviour of polymeric materials in machining. PhD thesis, University of Warwick.

Bishop, N. W. M. (1988) The use of frequency domain parameters to predict structural fatigue. PhD thesis, University of Warwick.

Rakels, Jan Henricus (1987) An in-process, non-contact surface finish sensor for high quality components generated using diamond turning. PhD thesis, University of Warwick.

Sturgeon, Andrew John (1987) Glass-ceramic coatings for metals. PhD thesis, University of Warwick.

Smith, S. T. (1987) Mechanical systems in nanometre metrology. PhD thesis, University of Warwick.

Ganaba, Taher H. (1985) Nonlinear finite element analysis of plates and slabs. PhD thesis, University of Warwick.

Temple, Gordon John (1985) Broad-band microwave amplifier design considerations. PhD thesis, University of Warwick.

Dirlik, Turan (1985) Application of computers in fatigue analysis. PhD thesis, University of Warwick.

Summerfield, Peter Humphrey (1984) A systems approach to the control of cutting tools within a large-scale manufacturing environment. PhD thesis, University of Warwick.

Revell, Philip Scott (1983) A sailwing vertical axis wind turbine for small scale applications. PhD thesis, University of Warwick.

Fowell, Barry George (1983) In-process control of grinding. PhD thesis, University of Warwick.

Millard, S. G. (1983) Shear transfer in cracked reinforced concrete. PhD thesis, University of Warwick.

Souza, J. A. M. Felippe de (1983) Some applications of projections in nonlinear control and estimation. PhD thesis, University of Warwick.

Carmichael, Neil (1982) Functional analysis and aspects of non-linear control theory. PhD thesis, University of Warwick.

Gonçalves, José Agostinho Basto (1981) Nonlinear controllability and observability with applications to gradient systems. PhD thesis, University of Warwick.

Oehlers, Deric J. (1980) Stud shear connectors for composite beams. PhD thesis, University of Warwick.

Allison, Robert William (1980) Cracking and tension field action in composite beams. PhD thesis, University of Warwick.

Kennedy, Leslie W. (1978) Large scale integrated (LSI) bipolar circuits : a study of integrated injection logic. PhD thesis, University of Warwick.

Da Silva, Ed (1978) New calibration techniques for one-port measurements using a computer-corrected network analyser. PhD thesis, University of Warwick.

Kwesah, Ali Hadi (1977) Characterization of integrated bipolar transistors using computer aided measurements and optimisation. PhD thesis, University of Warwick.

Lowe, Lawrence (1976) An investigation into the applications of real-time computing techniques in industrial audiometry. PhD thesis, University of Warwick.

May, Ian Melville (1976) Restrained composite columns. PhD thesis, University of Warwick.

Davall, P. W. (1975) Applications of statistics in the spectral analysis of time-varying systems. PhD thesis, University of Warwick.

Graham, Neil Anthony (1974) Airborne noise reduction of agricultural tractor cabs. PhD thesis, University of Warwick.

Heath, Thomas V. (1974) Some properties of bolted joints. PhD thesis, University of Warwick.

Michie, David (1974) Microwave integrated circuits : preparation of and measurement techniques for overlay capacitors. PhD thesis, University of Warwick.

Breeden, Derek Charles (1974) Computational analysis of multi-storey framed deck structures. PhD thesis, University of Warwick.

McPhun, Michael Keith (1974) Research in microwave electronics. PhD thesis, University of Warwick.

Harrold, Stephen Oliver (1974) Solid state ultrasonic imaging. PhD thesis, University of Warwick.

Hang, Chang C. (1973) Design studies of model reference adaptive control and identification systems. PhD thesis, University of Warwick.

Capaldi, Bernard (1973) The theory and performance of A.C. axial flux machines. PhD thesis, University of Warwick.

Turner, Roger Bryson (1973) Aspects of magnetohydrodynamic duct flow at high magnetic Reynolds number. PhD thesis, University of Warwick.

Hayden, John Thomas (1973) The application of superconductivity to rotating electrical machines. PhD thesis, University of Warwick.

Robinson, I. S. (1973) Anisotropic surface waves and instabilities under a vertical electromagnetic force. PhD thesis, University of Warwick.

Gill, John Martin (1973) Design, production and evaluation of tactual maps for the blind. PhD thesis, University of Warwick.

Weston-Bartholemew, Winston (1972) Materials evaluation using ultrasonic surface waves. PhD thesis, University of Warwick.

Hussain, Sadiq Baker (1971) Cadmium sulphide transducers : thick vacuum-deposited films for ultrasonic shear-mode low-frequencey operation. PhD thesis, University of Warwick.

Fisher, Barry C. (1971) Random load fatigue damage accumulation in mild steel. PhD thesis, University of Warwick.

Lewsley, Christopher Stanton (1971) A preliminary study of the analysis of reinforced concrete plane frames under sustained service loads. PhD thesis, University of Warwick.

Humphries, Peter Douglas (1971) Change of velocity in dynamical systems. PhD thesis, University of Warwick.

James, D. J. G. (1971) Dynamics of model-reference and hill climbing systems. PhD thesis, University of Warwick.

Thomas, Terence Haydn (1971) Pulse frequency techniques for automatic control. PhD thesis, University of Warwick.

Shapiro, Uri (1971) An experimental investigation into response distribution in coupled plates systems. PhD thesis, University of Warwick.

Robertson, James Ritchie (1971) A new transfer function analyser. PhD thesis, University of Warwick.

Moss, Geoffrey Charles (1971) The use of pseudo-random binary sequences in gas chromatography. PhD thesis, University of Warwick.

Monk, John (1970) Application of digital computers to on-line optimisation. PhD thesis, University of Warwick.

Comfort, John V. (1970) Studies in engine test bed automation. PhD thesis, University of Warwick.

Wellstead, P. E. (1970) Aspects of real-time digital spectral analysis. PhD thesis, University of Warwick.

Brankin, Paul Robert (1970) A.C. losses in superconducting nobium. PhD thesis, University of Warwick.

Mehmet, Kemâl (1970) Microwave integrated circuits : preparation and measurement techniques for materials and components. PhD thesis, University of Warwick.

Weedon, Timothy Michael William (1970) The partial correlation function in the identification of non-linear systems and an eye position transducer. PhD thesis, University of Warwick.

Miller, Michael Robert (1969) A frequency control for digital switching networks. PhD thesis, University of Warwick.

Cannell, John Kingesley (1969) Cochlear models. PhD thesis, University of Warwick.

Sydenham, P. H. (1969) Manual and automatice large-scale dimensional metrology. PhD thesis, University of Warwick.

Goodfellow, John Edward (1969) Superconductivity in binary eutectic alloys. PhD thesis, University of Warwick.

Pawley, Anthony John Robert (1969) Aspects of self-adaptive control using parameter perturbation techniques. PhD thesis, University of Warwick.

Bevir, Michael Keith (1969) Induced voltage electromagnetic flowmeters. PhD thesis, University of Warwick.

Ashby, David John (1969) Cumulative damage fatigue in notched mild steel specimens. PhD thesis, University of Warwick.

Fussey, David Eric (1969) Magneto-viscous effects in combustion plasma. PhD thesis, University of Warwick.

Linford, Rodney Martin Forbes (1968) Superconductors in alternating fields. PhD thesis, University of Warwick.

Malcolm, David George (1968) Thermo-anemometry in magnetohydrodynamics. PhD thesis, University of Warwick.

Murthy, Keshaviah Krishna (1967) Some studies in optimum and self-adaptive control systems. PhD thesis, University of Warwick.

Baxter, Anthony Christopher (1967) Electrochemical machining. PhD thesis, University of Warwick.