Items where Subject is "T Technology > TS Manufactures"
|Up a level|
Number of items at this level: 89.
Agyapong-Kodua, Kwabena, Asare, K. B. and Ceglarek, Darek. (2014) Digital modelling methodology for effective cost assessment. Procedia CIRP, Volume 17 . pp. 744-749. ISSN 2212-8271
Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Németh, István. (2014) Resource selection ontologies in support of a recipe-based factory design methodology. International Journal of Production Research . ISSN 0020-7543 (In Press)
Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Némethb, István. (2014) Recipe-based integrated semantic product, process, resource (PPR) digital modelling methodology. Procedia CIRP, Volume 17 . pp. 112-117. ISSN 2212-8271
Ahmad, Bilal, Vera, Daniel and Harrison, Robert. (2016) Engineering methods and tools for cyber–physical automation systems. Proceedings of the IEEE , PP (99). pp. 1-13. ISSN 0018-9219
Al-Meshaiei, Eisa Abdullah Eisa S. (1999) An expert system for material handling equipment selection. PhD thesis, University of Warwick.
Alifantis, Thanos (2006) Knowledge based improvement : simulation and artificial intelligence for understanding and improving decision making in an operations system. PhD thesis, University of Warwick.
Alkan, Bugra, Vera, Daniel, Ahmad, Mussawar, Ahmad, Bilal and Harrison, Robert (2016) A model for complexity assessment in manual assembly operations through predetermined motion time systems. In: 6th CIRP Conference on Assembly Technologies and Systems (CATS), Gothenburg, Sweden, 16-17 May 2016. Published in: Procedia CIRP, 44 pp. 429-434.
Baharin, Shamsuddin (1994) Knowledge-based automatic tolerance analysis system. PhD thesis, University of Warwick.
Bal, Darbara Jay (1995) Materials selection using knowledge-based techniques. PhD thesis, University of Warwick.
Bañuelas, Ricardo (2005) Six Sigma vs. Design for Six Sigma: selection of the requisite Six Sigma approach using multi-criteria decision analysis: innovation report. EngD thesis, University of Warwick.
Beaumont, Richard Adrian (2012) Determining the effect of strain rate on the fracture of sheet steel. PhD thesis, University of Warwick.
Beynon, Meurig, Cartwright, Richard, Cartwright, Alan and Yung, Yun Pui (1996) Abstract geometry for design in an empirical modelling context. University of Warwick. Department of Computer Science. (Department of Computer Science research report). (Unpublished)
Bott, J. H., Yin, H., Sridhar, Seetharaman and Auinger, Michael. (2016) Influence of gas composition and exposure cycle on the formation of surface and subsurface oxides in iron-aluminium-based alloys at high temperatures. Metallurgical and Materials Transactions B, 47 (4). pp. 2157-2163. ISSN 1073-5615
Cain, Rebecca, Bitterman, N., Ludden, G., MacKrill, James B., Ozcan, E., Petermans, A. and Escobar-Tello, C. (2016) Introduction : Design for health, wellbeing and happiness. In: DRS 2016 International Conference : Future–Focused Thinking 50th Anniversary International Conference, Brighton, UK, 27–30 Jun 2016. Published in: Proceedings of DRS 2016 International Conference: Future–Focused Thinking 50th Anniversary International Conference Brighton, UK, 27–30 June 2016, 4 pp. 1434-1441.
Chang, An-Yuan (1999) An attribute approach to the measurement of manufacturing system flexibility. PhD thesis, University of Warwick.
Chen, Bo, Coffman, Ed , Dereniowski, Dariusz and Kubiak, Wiesław. (2015) Normal-form preemption sequences for an open problem in scheduling theory. Journal of Scheduling . ISSN 1094-6136
Cherrington, Ruth, Hughes, Darren J., Senthilarasu, S. and Goodship, Vannessa. (2015) Inkjet-printed TiO2 nanoparticles from aqueous solutions for dye-sensitized solar cells (DSSCs). Energy Technology . ISSN 2194-4288 (In Press)
Cherrington, Ruth, Wood, Benjamin M. and Goodship, Vannessa. (2016) Digital printing of titanium dioxide for dye sensitized solar cells. Journal of Visualized Experiments (JoVE) (111). e53963. ISSN 1940-087X
Cheung, Yen Ping (1991) Artificial intelligence techniques for assembly process planning. PhD thesis, University of Warwick.
Colledani, Marcello, Bolognese, L., Ceglarek, Darek, Franchini, Fabio, Marine, C. and Mistry, A.. (2015) Multi-objective early-stage design of automotive hybrid assembly lines. Procedia CIRP, Volume 28 . pp. 125-130. ISSN 2212-8271 (In Press)
Conceição, Samuel Vieira, da Silva, Gerson Luis Caetano, Lu, Dawei, Nunes, Nilson Tadeu Ramos and Pedrosa, Guilherme Corteletti. (2015) A demand classification scheme for spare part inventory model subject to stochastic demand and lead time. Production Planning & Control: The Management of Operations . ISSN 0953-7287 (In Press)
Cooper, David E. , Stanford, Mark, Kibble, Kevin A. and Gibbons, Gregory John. (2012) Additive manufacturing for product improvement at Red Bull Technology. Materials & Design, Vol.41 . pp. 226-230. ISSN 02613069
Cox, Sophie C. (2013) Synthesis and 3D printing of hydroxyapatite scaffolds for applications in bone tissue engineering. PhD thesis, University of Warwick.
Crafts, N. F. R. and Wolf, Nikolaus. (2014) The location of the UK cotton textiles industry in 1838 : a quantitative analysis. The Journal of Economic History , 74 (4). pp. 1103-1139. ISSN 0022-0507
Dai, Jinhuo, Nanayakkara, Sepa, Lamb, Thomas, Clark, Andrew J., Guo, Si-Xuan, Zhang, Jie, Patti, Antonio F. and Saito, Kei. (2016) Effect of the N-based ligands in copper complexes for depolymerisation of lignin. New Journal of Chemistry, 40 (4). pp. 3511-3519. ISSN 1144-0546
Das, Abhishek (2016) Shape variation modelling, analysis and statistical control for assembly system with compliant parts. PhD thesis, University of Warwick.
Dessens, Luis Felipe Romero (2003) Strong component-based methodology for facility layout design. PhD thesis, University of Warwick.
Di Maggio, F., Ling, M., Tsang, A., Covington, James A., Saffell, J. and Blackman, C.. (2014) Aerosol-assisted CVD synthesis, characterisation and gas-sensing application of gold-functionalised tungsten oxide. Journal of Sensors and Sensor Systems, 3 (2). pp. 325-330. ISSN 2194-878X
Dinda, Soumitra Kumar, Basiruddin Sk, Md., Roy, Gour Gopal and Srirangam, Prakash. (2016) Microstructure and mechanical properties of electron beam welded dissimilar steel to Fe-Al alloy joints. Materials Science and Engineering: A . ISSN 0921-5093 (In Press)
Ferrer, Borja Ramis, Ahmad, Bilal, Vera, Daniel, Lobov, Andrei, Harrison, Robert and Lastra, Jose Luis Martinez. (2016) Product, process and resource model coupling for knowledge-driven assembly automation. Automatisierungstechnik, 64 (3). pp. 231-243. ISSN 0178-2312
Ferrie, John (1998) The development of process models : executive summary. PhD thesis, University of Warwick.
Gao, Bo, He, Ligang and Jarvis, Stephen A.. (2016) Offload decision models and the price of anarchy in mobile cloud application ecosystems. IEEE Access, 3 . pp. 3125-3137. ISSN 2169-3536
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. ISSN 0954-4100
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. ISSN 0954-4100
Gibbons, Gregory John, Williams, Reuben, Purnell, Phil and Farahi, Elham. (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. ISSN 1743-6761
Goodall, William Richard (1993) Scheduling and control in the batch process industry using hybrid knowledge based simulation. PhD thesis, University of Warwick.
Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.
University of Warwick (2014) Multilayer manufacturing method utilising mould. World International Property Organization no.WO2014/091197 A1 [Online]..
Greenspan, Anna (2000) Capitalism's transcendental time machine. PhD thesis, University of Warwick.
Guo, Z., Tian, Yanling, Liu , C., Wang, F., Liu, Xianping, Shirinzadeh, B. and Zhang, D.. (2015) Design and control methodology of a 3-DOF flexure-based mechanism for micro/nano-positioning. Robotics and Computer-Integrated Manufacturing, 32 . pp. 93-105. ISSN 0736-5845
Gupta, Aniruddha, Ascroft, Helen and Barnes, Stuart (2016) Effect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP). In: 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, 31 May - 2 Jun 2016. Published in: Procedia CIRP, 46 pp. 619-622.
Hajarnavis, Vivek (2006) An evaluation and comparison of PLC programming techniques : innovation report. EngD thesis, University of Warwick.
Haq, Izhar Ul, Masood, Tariq, Ahmad, Bilal, Harrison, Robert, Raza, Bagar and Monfared, Radmehr P. (2011) Product to process lifecycle management in assembly automation systems. In: 7th International Conference on Digital Enterprise Technology, Athens, Greece, 28-30 Sep 2011. Published in: Proceedings of DET2011 pp. 1-11.
Hayes, Jonathan (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.
Hazra, S. (Sumit), Roya, R., Williams, D., Aylmoreb, R. and Hollingdale, D. (2013) A novel inspection method for determining the cosmetic quality of automotive skin panels. Journal of Materials Processing Technology, Volume 213 . pp. 2049-2063. ISSN 0924-0136
Howse, D. S. (2002) Improved productivity in fusion welding : executive summary. EngD thesis, University of Warwick.
Hu, Xiao-Bing, Wang, Ming, Ye, Qian, Han, Zhangan and Leeson, Mark S.. (2014) Multi-objective new product development by complete Pareto front and ripple-spreading algorithm. Neurocomputing , Volume 142 . pp. 4-15. ISSN 0925-2312
Huang, Tian, Wang, P. F., Zhao, X. M. and Chetwynd, D. G.. (2010) Design of a 4-DOF hybrid PKM module for large structural component assembly. CIRP Annals - Manufacturing Technology, Vol.59 (No.1). pp. 159-162. ISSN 0007-8506
Huang, You Sen (1996) A control strategy for promoting shop-floor stability. PhD thesis, University of Warwick.
Jahdi, Saeed, Alatise, Olayiwola M., Ran, Li and Mawby, P. A. (Philip A.). (2015) Analytical modeling of switching energy of silicon carbide Schottky diodes as functions of dIDS/dt and temperature. IEEE Transactions on Power Electronics, 30 (6). pp. 3345-3355. ISSN 0885-8993
Jones, Jason Blair (2013) Investigation of laser printing for 3D printing and additive manufacturing. PhD thesis, University of Warwick.
Jones, Jeffrey Alun and Warrington, Les. (2010) Generic approach for deriving reliability and maintenance requirements through consideration of in-context customer objectives. Institution of Mechanical Engineers. Proceedings. Part O: Journal of Risk and Reliability, Vol.224 (No.2). pp. 105-112. ISSN 1748-006X
King, Philip Huw (2009) Towards rapid 3D direct manufacture of biomechanical microstructures. PhD thesis, University of Warwick.
Koncsag, Claudia I., Eastwood, Daniel C. and Kirwan, Kerry. (2011) Recovering low molecular weight extractives from degraded straw by oyster mushroom at the farm scale for high value use. Biomass & Bioenergy, Vol.35 (No.7). pp. 3276-3279. ISSN 1873-2909
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, D. R. and Hutchins, David A.. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. ISSN 1932-6203
Linhart, W. M., Rajpalke, M. K., Buckeridge, John, Murgatroyd, P. A. E., Bomphrey, J. J., Alaria, J., Catlow, C. R. A., Scanlon, D. O., Ashwin, M. J. and Veal, T. D. (Tim D.). (2016) Band gap reduction in InNxSb1-x alloys : optical absorption, k · P modeling, and density functional theory. Applied Physics Letters, 109 (13). 132104. ISSN 0003-6951
Liu, Haitao, Huang, Tian, Kecskeméthy, Andrés and Chetwynd, D. G.. (2014) A generalized approach for computing the transmission index of parallel mechanisms. Mechanism and Machine Theory, 74 . pp. 245-256. ISSN 0094-114X
Liu, Jun, Strangwood, M., Davis, C. L. and Parker, J.. (2015) Non-destructive characterisation of N/Al level in P91 steels using electromagnetic sensors. Materials Science and Technology, 31 (9). pp. 1042-1050. ISSN 0267-0836
Love, James H., Roper, Stephen and Vahter, Priit. (2014) Dynamic complementarities in innovation strategies. Research Policy, 43 (10). pp. 1774-1784. ISSN 0048-7333
Marsden, Alexander J., Brommer, Peter, Mudd, James J., Dyson, Mark Adam, Cook, Robert M., Asensio, María, Avila, José, Levy, Ana, Sloan, Jeremy, Quigley, David (Researcher in physics), Bell, Gavin R. and Wilson, Neil R.. (2015) Effect of oxygen and nitrogen functionalization on the physical and electronic structure of graphene. Nano Research . pp. 1-16. ISSN 1998-0124
Meredith, James O., Coles, Stuart R., Powe, Richard, Collings, Ed, Cozien-Cazuc, Sophie, Weager, Brendon, Müssig, Jorg and Kirwan, Kerry. (2013) On the static and dynamic properties of flax and Cordenka epoxy composites. Composites Science and Technology, Volume 80 . pp. 31-38. ISSN 0266-3538
New, Steve, Hadi, Mohammed, Pickering, Sharon, Robertson, Eleanor, Morgan, Lauren J., Griffin, Damian R., Collins, Gary S., Rivero-Arias, Oliver, Catchpole, Ken and McCulloch, Peter. (2016) Lean participative process improvement : outcomes and obstacles in trauma orthopaedics. PLoS One, 11 (4). e0152360. ISSN 1932-6203
Ng, Tat Lun (1996) Improvement of product development cycle time and cost by applying concurrent integrated design and assembly planning : executive summary. PhD thesis, University of Warwick.
Niedderer , K., Ludden, G., Cain, Rebecca, Morris, A. G. (Alan George) and Freimane, A. (2016) Introduction : Design for behaviour change. In: DRS 2016 International Conference : Future–Focused Thinking 50th Anniversary International Conference, Brighton, UK, 27–30 Jun 2016. Published in: Proceedings of DRS 2016 International Conference: Future–Focused Thinking 50th Anniversary International Conference Brighton, UK, 27–30 June 2016, 4 pp. 1271-1275.
Pal, Avishek (2015) Scalable design synthesis for automotive assembly system. PhD thesis, University of Warwick.
Parke, Laura, Hooper, Ian R., Hicken, Robert J., Dancer, Claire E. J., Grant, Patrick S., Youngs, Ian J., Sambles, Roy and Hibbins, Alaistair P.. (2013) Heavily loaded ferrite-polymer composites to produce high refractive index materials at centimetre wavelengths. APL Materials, Volume 1 (Number 4). Article number 042108.
Phoomboplab, Tirawat (2012) Self-resilient production systems : framework for design synthesis of multi-station assembly systems. PhD thesis, University of Warwick.
Pickardt, Christoph W. (2013) Evolutionary methods for the design of dispatching rules for complex and dynamic scheduling problems. PhD thesis, University of Warwick.
Pimentel, Ernani Falcao (1996) A two-pass scheduling method using discrete event simulation. PhD thesis, University of Warwick.
Raath, Neill D. (2014) Failure prediction of spot welded boron steel. PhD thesis, University of Warwick.
Rahnama, Alireza, Dashwood, R. J. and Seetharaman, Sridhar. (2017) A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordred γ and α phases in low density steel. Computational Materials Science, 126 . pp. 152-159. ISSN 0927-0256
Riello, Giorgio. (2007) Nature, production and regulation in eighteenth-century Britain and France : the case of the leather industry. Historical Research, Vol.81 (No.211). pp. 78-99. ISSN 0950-3471
Sandhu, Sukhbinder Singh (1997) Development of a standard framework for manufacturing simulators. PhD thesis, University of Warwick.
Simmons, Jonathan A., Sprittles, James E. and Shikhmurzaeva, Yulii D.. (2015) The formation of a bubble from a submerged orifice. European Journal of Mechanics B/Fluids, 53 . pp. 24-36. ISSN 0997-7546
Slater, Carl, Spooner, Stephen, Davis, Claire L. and Sridhar, Seetharaman. (2016) Observation of the reversible stabilisation of liquid phase iron during nitriding. Materials Letters, 173 . pp. 98-101. ISSN 0167-577X
Stephenson, David (2015) Design and simulation of nanofluidic branching betworks. PhD thesis, University of Warwick.
Swift, Mark P. (2005) The development and implementation of a collaborative architecture for SMEs : executive summary. PhD thesis, University of Warwick.
Taylor, Phillip, Griffiths, Nathan, Bhalerao, Abhir, Sarabjot, Anand, Popham, Thomas, Zhou, Xu and Gelencser, Adam. (2016) Data mining for vehicle telemetry. Applied Artificial Intelligence, 30 (3). pp. 233-256. ISSN 0883-9514
Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.
Thornby, John Albert, MacKay, R. S. and Williams, M. A.. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. ISSN 0272-4960
Vasconcelos, Bernardo Jose Calafate de (1982) Improvements to stochastic stock control decisions. PhD thesis, University of Warwick.
Vernon, Guy Mark (2000) Work humanization: comparative historical developments in the manufacturing sectors of advanced capitalist societies, 1960-1995. PhD thesis, University of Warwick.
Voisey, K. T., Folkes, J., Srithorn, J. and Hughes, Darren J.. (2014) Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V. Physics Procedia, Volume 56 . pp. 1277-1285. ISSN 1875-3892
Wang, Manxin, Liu, Haitao, Huang, Tian and Chetwynd, D. G.. (2015) Compliance analysis of a 3-SPR parallel mechanism with consideration of gravity. Mechanism and Machine Theory, 84 . pp. 99-112. ISSN 0094-114X
Wang, Qiangqiang, Zhang, Lifeng and Sridhar, Seetharaman. (2016) Modeling on fluid flow and inclusion motion in centrifugal continuous casting strands. Metallurgical and Materials Transactions B, 47 (4). pp. 2623-2642. ISSN 1073-5615
Winch, Graham (1992) The implementation of CAD/CAM systems in the metalworking industries. PhD thesis, University of Warwick.
Yang, Jia (Researcher in engineering) (2013) Melting and solidification models and thermal characteristics of microencapsulated phase change materials. PhD thesis, University of Warwick.
Zhang, Jiayi, Ahmad, Bilal, Vera, Daniel and Harrison, Robert (2016) Ontology based semantic-predictive model for reconfigurable automation systems. In: IEEE 14th International Conference on Industrial Informatics, Poitiers, France, 18-21 Jul 2016 (In Press)
Zhou, L., Liu, Jun, Hao, X. J., Strangwood, M., Peyton, A. J. and Davis, Claire L.. (2014) Quantification of the phase fraction in steel using an electromagnetic sensor. NDT & E International, 67 . pp. 31-35. ISSN 0963-8695