Journal Article

Cooper, David E. , Stanford, Mark, Kibble, Kevin A. and Gibbons, Gregory John, 1970-. (2012) Additive manufacturing for product improvement at Red Bull Technology. Materials & Design, Vol.41 . pp. 226-230. ISSN 02613069

Gibbons, Gregory John, 1970-, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. ISSN 0954-4100

Gibbons, Gregory John, 1970-, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. ISSN 0954-4100

Gibbons, Gregory John, 1970-, Williams, Reuben, Purnell, Phil and Farahi, Elham. (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. ISSN 1743-6761

Huang, Tian, Wang, P. F., Zhao, X. M. and Chetwynd, D. G. (Derek G.), 1948-. (2010) Design of a 4-DOF hybrid PKM module for large structural component assembly. CIRP Annals - Manufacturing Technology, Vol.59 (No.1). pp. 159-162. ISSN 0007-8506

Jones, Jeffrey Alun, 1962- and Warrington, Les. (2010) Generic approach for deriving reliability and maintenance requirements through consideration of in-context customer objectives. Institution of Mechanical Engineers. Proceedings. Part O: Journal of Risk and Reliability, Vol.224 (No.2). pp. 105-112. ISSN 1748-006X

Koncsag, Claudia I., Eastwood, Daniel C. and Kirwan, Kerry. (2011) Recovering low molecular weight extractives from degraded straw by oyster mushroom at the farm scale for high value use. Biomass & Bioenergy, Vol.35 (No.7). pp. 3276-3279. ISSN 1873-2909

Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, D. R. and Hutchins, David A.. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. ISSN 1932-6203

Riello, Giorgio. (2007) Nature, production and regulation in eighteenth-century Britain and France : the case of the leather industry. Historical Research, Vol.81 (No.211). pp. 78-99. ISSN 0950-3471

Thesis or Dissertation

Al-Meshaiei, Eisa Abdullah Eisa S. (1999) An expert system for material handling equipment selection. PhD thesis, University of Warwick.

Alifantis, Thanos (2006) Knowledge based improvement : simulation and artificial intelligence for understanding and improving decision making in an operations system. PhD thesis, University of Warwick.

Baharin, Shamsuddin (1994) Knowledge-based automatic tolerance analysis system. PhD thesis, University of Warwick.

Bañuelas, Ricardo (2005) Six Sigma vs. Design for Six Sigma: selection of the requisite Six Sigma approach using multi-criteria decision analysis: innovation report. EngD thesis, University of Warwick.

Chang, An-Yuan (1999) An attribute approach to the measurement of manufacturing system flexibility. PhD thesis, University of Warwick.

Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.

Greenspan, Anna, 1970- (2000) Capitalism's transcendental time machine. PhD thesis, University of Warwick.

Hajarnavis, Vivek (2006) An evaluation and comparison of PLC programming techniques : innovation report. EngD thesis, University of Warwick.

Hayes, Jonathan, 1966- (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.

Howse, D. S. (2002) Improved productivity in fusion welding : executive summary. EngD thesis, University of Warwick.

Huang, You Sen (1996) A control strategy for promoting shop-floor stability. PhD thesis, University of Warwick.

King, Philip Huw (2009) Towards rapid 3D direct manufacture of biomechanical microstructures. PhD thesis, University of Warwick.

Sandhu, Sukhbinder Singh (1997) Development of a standard framework for manufacturing simulators. PhD thesis, University of Warwick.

Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.

Vasconcelos, Bernardo Jose Calafate de, 1942- (1982) Improvements to stochastic stock control decisions. PhD thesis, University of Warwick.

Vernon, Guy Mark, 1971- (2000) Work humanization: comparative historical developments in the manufacturing sectors of advanced capitalist societies, 1960-1995. PhD thesis, University of Warwick.

Winch, Graham (1992) The implementation of CAD/CAM systems in the metalworking industries. PhD thesis, University of Warwick.